HG_REPOSITORIES/LPP/INSTRUMENTATION/USERS/PELLION/VHD_Lib Files · LPP_drivers/Doxyfile

Alexis

r14

# Doxyfile 1.7.1

# This file describes the settings to be used by the documentation system

# doxygen (www.doxygen.org) for a project

#

# All text after a hash (#) is considered a comment and will be ignored

# The format is:

# TAG = value [value, ...]

# For lists items can also be appended using:

# TAG += value [value, ...]

# Values that contain spaces should be placed between quotes (" ")

#---------------------------------------------------------------------------

# Project related configuration options

#---------------------------------------------------------------------------

# This tag specifies the encoding used for all characters in the config file

# that follow. The default is UTF-8 which is also the encoding used for all

# text before the first occurrence of this tag. Doxygen uses libiconv (or the

# iconv built into libc) for the transcoding. See

# http://www.gnu.org/software/libiconv for the list of possible encodings.

DOXYFILE_ENCODING = UTF-8

# The PROJECT_NAME tag is a single word (or a sequence of words surrounded

# by quotes) that should identify the project.

alexis

r66

PROJECT_NAME = "VHDL lib Drivers"

Alexis

r14

# The PROJECT_NUMBER tag can be used to enter a project or revision number.

# This could be handy for archiving the generated documentation or

# if some version control system is used.

alexis

r66

PROJECT_NUMBER = 0.4

Alexis

r14

# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

# base path where the generated documentation will be put.

# If a relative path is entered, it will be relative to the location

# where doxygen was started. If left blank the current directory will be used.

OUTPUT_DIRECTORY = ./Doc

# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

# 4096 sub-directories (in 2 levels) under the output directory of each output

# format and will distribute the generated files over these directories.

# Enabling this option can be useful when feeding doxygen a huge amount of

# source files, where putting all generated files in the same directory would

# otherwise cause performance problems for the file system.

CREATE_SUBDIRS = NO

# The OUTPUT_LANGUAGE tag is used to specify the language in which all

# documentation generated by doxygen is written. Doxygen will use this

# information to generate all constant output in the proper language.

# The default language is English, other supported languages are:

# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,

# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English

# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,

# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,

# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.

OUTPUT_LANGUAGE = English

# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

# include brief member descriptions after the members that are listed in

# the file and class documentation (similar to JavaDoc).

# Set to NO to disable this.

BRIEF_MEMBER_DESC = YES

# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

# the brief description of a member or function before the detailed description.

# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

# brief descriptions will be completely suppressed.

REPEAT_BRIEF = YES

# This tag implements a quasi-intelligent brief description abbreviator

# that is used to form the text in various listings. Each string

# in this list, if found as the leading text of the brief description, will be

# stripped from the text and the result after processing the whole list, is

# used as the annotated text. Otherwise, the brief description is used as-is.

# If left blank, the following values are used ("$name" is automatically

# replaced with the name of the entity): "The $name class" "The $name widget"

# "The $name file" "is" "provides" "specifies" "contains"

# "represents" "a" "an" "the"

ABBREVIATE_BRIEF = "The $name class" \

"The $name widget" \

"The $name file" \

is \

provides \

specifies \

contains \

represents \

a \

an \

the

# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

# Doxygen will generate a detailed section even if there is only a brief

# description.

ALWAYS_DETAILED_SEC = NO

# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

# inherited members of a class in the documentation of that class as if those

# members were ordinary class members. Constructors, destructors and assignment

# operators of the base classes will not be shown.

INLINE_INHERITED_MEMB = NO

# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

# path before files name in the file list and in the header files. If set

# to NO the shortest path that makes the file name unique will be used.

FULL_PATH_NAMES = YES

# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

# can be used to strip a user-defined part of the path. Stripping is

# only done if one of the specified strings matches the left-hand part of

# the path. The tag can be used to show relative paths in the file list.

# If left blank the directory from which doxygen is run is used as the

# path to strip.

STRIP_FROM_PATH =

# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

# the path mentioned in the documentation of a class, which tells

# the reader which header file to include in order to use a class.

# If left blank only the name of the header file containing the class

# definition is used. Otherwise one should specify the include paths that

# are normally passed to the compiler using the -I flag.

STRIP_FROM_INC_PATH =

# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

# (but less readable) file names. This can be useful is your file systems

# doesn't support long names like on DOS, Mac, or CD-ROM.

SHORT_NAMES = YES

# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

# will interpret the first line (until the first dot) of a JavaDoc-style

# comment as the brief description. If set to NO, the JavaDoc

# comments will behave just like regular Qt-style comments

# (thus requiring an explicit @brief command for a brief description.)

JAVADOC_AUTOBRIEF = NO

# If the QT_AUTOBRIEF tag is set to YES then Doxygen will

# interpret the first line (until the first dot) of a Qt-style

# comment as the brief description. If set to NO, the comments

# will behave just like regular Qt-style comments (thus requiring

# an explicit \brief command for a brief description.)

QT_AUTOBRIEF = NO

# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

# treat a multi-line C++ special comment block (i.e. a block of //! or ///

# comments) as a brief description. This used to be the default behaviour.

# The new default is to treat a multi-line C++ comment block as a detailed

# description. Set this tag to YES if you prefer the old behaviour instead.

MULTILINE_CPP_IS_BRIEF = NO

# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

# member inherits the documentation from any documented member that it

# re-implements.

INHERIT_DOCS = YES

# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

# a new page for each member. If set to NO, the documentation of a member will

# be part of the file/class/namespace that contains it.

SEPARATE_MEMBER_PAGES = NO

# The TAB_SIZE tag can be used to set the number of spaces in a tab.

# Doxygen uses this value to replace tabs by spaces in code fragments.

TAB_SIZE = 8

# This tag can be used to specify a number of aliases that acts

# as commands in the documentation. An alias has the form "name=value".

# For example adding "sideeffect=\par Side Effects:\n" will allow you to

# put the command \sideeffect (or @sideeffect) in the documentation, which

# will result in a user-defined paragraph with heading "Side Effects:".

# You can put \n's in the value part of an alias to insert newlines.

ALIASES =

# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

# sources only. Doxygen will then generate output that is more tailored for C.

# For instance, some of the names that are used will be different. The list

# of all members will be omitted, etc.

OPTIMIZE_OUTPUT_FOR_C = YES

# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

# sources only. Doxygen will then generate output that is more tailored for

# Java. For instance, namespaces will be presented as packages, qualified

# scopes will look different, etc.

OPTIMIZE_OUTPUT_JAVA = NO

# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran

# sources only. Doxygen will then generate output that is more tailored for

# Fortran.

OPTIMIZE_FOR_FORTRAN = NO

# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL

# sources. Doxygen will then generate output that is tailored for

# VHDL.

OPTIMIZE_OUTPUT_VHDL = NO

# Doxygen selects the parser to use depending on the extension of the files it

# parses. With this tag you can assign which parser to use for a given extension.

# Doxygen has a built-in mapping, but you can override or extend it using this

# tag. The format is ext=language, where ext is a file extension, and language

# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,

# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make

# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C

# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions

# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

EXTENSION_MAPPING =

# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want

# to include (a tag file for) the STL sources as input, then you should

# set this tag to YES in order to let doxygen match functions declarations and

# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

# func(std::string) {}). This also make the inheritance and collaboration

# diagrams that involve STL classes more complete and accurate.

BUILTIN_STL_SUPPORT = NO

# If you use Microsoft's C++/CLI language, you should set this option to YES to

# enable parsing support.

CPP_CLI_SUPPORT = NO

# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.

# Doxygen will parse them like normal C++ but will assume all classes use public

# instead of private inheritance when no explicit protection keyword is present.

SIP_SUPPORT = NO

# For Microsoft's IDL there are propget and propput attributes to indicate getter

# and setter methods for a property. Setting this option to YES (the default)

# will make doxygen to replace the get and set methods by a property in the

# documentation. This will only work if the methods are indeed getting or

# setting a simple type. If this is not the case, or you want to show the

# methods anyway, you should set this option to NO.

IDL_PROPERTY_SUPPORT = YES

# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

# tag is set to YES, then doxygen will reuse the documentation of the first

# member in the group (if any) for the other members of the group. By default

# all members of a group must be documented explicitly.

DISTRIBUTE_GROUP_DOC = NO

# Set the SUBGROUPING tag to YES (the default) to allow class member groups of

# the same type (for instance a group of public functions) to be put as a

# subgroup of that type (e.g. under the Public Functions section). Set it to

# NO to prevent subgrouping. Alternatively, this can be done per class using

# the \nosubgrouping command.

SUBGROUPING = YES

# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum

# is documented as struct, union, or enum with the name of the typedef. So

# typedef struct TypeS {} TypeT, will appear in the documentation as a struct

# with name TypeT. When disabled the typedef will appear as a member of a file,

# namespace, or class. And the struct will be named TypeS. This can typically

# be useful for C code in case the coding convention dictates that all compound

# types are typedef'ed and only the typedef is referenced, never the tag name.

TYPEDEF_HIDES_STRUCT = NO

# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to

# determine which symbols to keep in memory and which to flush to disk.

# When the cache is full, less often used symbols will be written to disk.

# For small to medium size projects (<1000 input files) the default value is

# probably good enough. For larger projects a too small cache size can cause

# doxygen to be busy swapping symbols to and from disk most of the time

# causing a significant performance penality.

# If the system has enough physical memory increasing the cache will improve the

# performance by keeping more symbols in memory. Note that the value works on

# a logarithmic scale so increasing the size by one will rougly double the

# memory usage. The cache size is given by this formula:

# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,

# corresponding to a cache size of 2^16 = 65536 symbols

SYMBOL_CACHE_SIZE = 0

#---------------------------------------------------------------------------

# Build related configuration options

#---------------------------------------------------------------------------

# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

# documentation are documented, even if no documentation was available.

# Private class members and static file members will be hidden unless

# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

EXTRACT_ALL = YES

# If the EXTRACT_PRIVATE tag is set to YES all private members of a class

# will be included in the documentation.

EXTRACT_PRIVATE = NO

# If the EXTRACT_STATIC tag is set to YES all static members of a file

# will be included in the documentation.

EXTRACT_STATIC = NO

# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

# defined locally in source files will be included in the documentation.

# If set to NO only classes defined in header files are included.

EXTRACT_LOCAL_CLASSES = YES

# This flag is only useful for Objective-C code. When set to YES local

# methods, which are defined in the implementation section but not in

# the interface are included in the documentation.

# If set to NO (the default) only methods in the interface are included.

EXTRACT_LOCAL_METHODS = YES

# If this flag is set to YES, the members of anonymous namespaces will be

# extracted and appear in the documentation as a namespace called

# 'anonymous_namespace{file}', where file will be replaced with the base

# name of the file that contains the anonymous namespace. By default

# anonymous namespace are hidden.

EXTRACT_ANON_NSPACES = NO

# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

# undocumented members of documented classes, files or namespaces.

# If set to NO (the default) these members will be included in the

# various overviews, but no documentation section is generated.

# This option has no effect if EXTRACT_ALL is enabled.

HIDE_UNDOC_MEMBERS = NO

# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

# undocumented classes that are normally visible in the class hierarchy.

# If set to NO (the default) these classes will be included in the various

# overviews. This option has no effect if EXTRACT_ALL is enabled.

HIDE_UNDOC_CLASSES = NO

# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

# friend (class|struct|union) declarations.

# If set to NO (the default) these declarations will be included in the

# documentation.

HIDE_FRIEND_COMPOUNDS = NO

# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

# documentation blocks found inside the body of a function.

# If set to NO (the default) these blocks will be appended to the

# function's detailed documentation block.

HIDE_IN_BODY_DOCS = NO

# The INTERNAL_DOCS tag determines if documentation

# that is typed after a \internal command is included. If the tag is set

# to NO (the default) then the documentation will be excluded.

# Set it to YES to include the internal documentation.

INTERNAL_DOCS = NO

# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

# file names in lower-case letters. If set to YES upper-case letters are also

# allowed. This is useful if you have classes or files whose names only differ

# in case and if your file system supports case sensitive file names. Windows

# and Mac users are advised to set this option to NO.

CASE_SENSE_NAMES = NO

# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

# will show members with their full class and namespace scopes in the

# documentation. If set to YES the scope will be hidden.

HIDE_SCOPE_NAMES = YES

# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

# will put a list of the files that are included by a file in the documentation

# of that file.

SHOW_INCLUDE_FILES = YES

# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen

# will list include files with double quotes in the documentation

# rather than with sharp brackets.

FORCE_LOCAL_INCLUDES = NO

# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

# is inserted in the documentation for inline members.

INLINE_INFO = YES

# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

# will sort the (detailed) documentation of file and class members

# alphabetically by member name. If set to NO the members will appear in

# declaration order.

SORT_MEMBER_DOCS = YES

# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

# brief documentation of file, namespace and class members alphabetically

# by member name. If set to NO (the default) the members will appear in

# declaration order.

SORT_BRIEF_DOCS = NO

# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen

# will sort the (brief and detailed) documentation of class members so that

# constructors and destructors are listed first. If set to NO (the default)

# the constructors will appear in the respective orders defined by

# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.

# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO

# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.

SORT_MEMBERS_CTORS_1ST = NO

# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the

# hierarchy of group names into alphabetical order. If set to NO (the default)

# the group names will appear in their defined order.

SORT_GROUP_NAMES = NO

# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

# sorted by fully-qualified names, including namespaces. If set to

# NO (the default), the class list will be sorted only by class name,

# not including the namespace part.

# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

# Note: This option applies only to the class list, not to the

# alphabetical list.

SORT_BY_SCOPE_NAME = NO

# The GENERATE_TODOLIST tag can be used to enable (YES) or

# disable (NO) the todo list. This list is created by putting \todo

# commands in the documentation.

GENERATE_TODOLIST = YES

# The GENERATE_TESTLIST tag can be used to enable (YES) or

# disable (NO) the test list. This list is created by putting \test

# commands in the documentation.

GENERATE_TESTLIST = YES

# The GENERATE_BUGLIST tag can be used to enable (YES) or

# disable (NO) the bug list. This list is created by putting \bug

# commands in the documentation.

GENERATE_BUGLIST = YES

# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

# disable (NO) the deprecated list. This list is created by putting

# \deprecated commands in the documentation.

GENERATE_DEPRECATEDLIST= YES

# The ENABLED_SECTIONS tag can be used to enable conditional

# documentation sections, marked by \if sectionname ... \endif.

ENABLED_SECTIONS =

# The MAX_INITIALIZER_LINES tag determines the maximum number of lines

# the initial value of a variable or define consists of for it to appear in

# the documentation. If the initializer consists of more lines than specified

# here it will be hidden. Use a value of 0 to hide initializers completely.

# The appearance of the initializer of individual variables and defines in the

# documentation can be controlled using \showinitializer or \hideinitializer

# command in the documentation regardless of this setting.

MAX_INITIALIZER_LINES = 30

# Set the SHOW_USED_FILES tag to NO to disable the list of files generated

# at the bottom of the documentation of classes and structs. If set to YES the

# list will mention the files that were used to generate the documentation.

SHOW_USED_FILES = YES

# If the sources in your project are distributed over multiple directories

# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

# in the documentation. The default is NO.

SHOW_DIRECTORIES = NO

# Set the SHOW_FILES tag to NO to disable the generation of the Files page.

# This will remove the Files entry from the Quick Index and from the

# Folder Tree View (if specified). The default is YES.

SHOW_FILES = YES

# Set the SHOW_NAMESPACES tag to NO to disable the generation of the

# Namespaces page. This will remove the Namespaces entry from the Quick Index

# and from the Folder Tree View (if specified). The default is YES.

SHOW_NAMESPACES = YES

# The FILE_VERSION_FILTER tag can be used to specify a program or script that

# doxygen should invoke to get the current version for each file (typically from

# the version control system). Doxygen will invoke the program by executing (via

# popen()) the command <command> <input-file>, where <command> is the value of

# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

# provided by doxygen. Whatever the program writes to standard output

# is used as the file version. See the manual for examples.

FILE_VERSION_FILTER =

# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed

# by doxygen. The layout file controls the global structure of the generated

# output files in an output format independent way. The create the layout file

# that represents doxygen's defaults, run doxygen with the -l option.

# You can optionally specify a file name after the option, if omitted

# DoxygenLayout.xml will be used as the name of the layout file.

LAYOUT_FILE =

#---------------------------------------------------------------------------

# configuration options related to warning and progress messages

#---------------------------------------------------------------------------

# The QUIET tag can be used to turn on/off the messages that are generated

# by doxygen. Possible values are YES and NO. If left blank NO is used.

QUIET = NO

# The WARNINGS tag can be used to turn on/off the warning messages that are

# generated by doxygen. Possible values are YES and NO. If left blank

# NO is used.

WARNINGS = YES

# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

# for undocumented members. If EXTRACT_ALL is set to YES then this flag will

# automatically be disabled.

WARN_IF_UNDOCUMENTED = YES

# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

# potential errors in the documentation, such as not documenting some

# parameters in a documented function, or documenting parameters that

# don't exist or using markup commands wrongly.

WARN_IF_DOC_ERROR = YES

# This WARN_NO_PARAMDOC option can be abled to get warnings for

# functions that are documented, but have no documentation for their parameters

# or return value. If set to NO (the default) doxygen will only warn about

# wrong or incomplete parameter documentation, but not about the absence of

# documentation.

WARN_NO_PARAMDOC = NO

# The WARN_FORMAT tag determines the format of the warning messages that

# doxygen can produce. The string should contain the $file, $line, and $text

# tags, which will be replaced by the file and line number from which the

# warning originated and the warning text. Optionally the format may contain

# $version, which will be replaced by the version of the file (if it could

# be obtained via FILE_VERSION_FILTER)

WARN_FORMAT = "$file:$line: $text"

# The WARN_LOGFILE tag can be used to specify a file to which warning

# and error messages should be written. If left blank the output is written

# to stderr.

WARN_LOGFILE =

#---------------------------------------------------------------------------

# configuration options related to the input files

#---------------------------------------------------------------------------

# The INPUT tag can be used to specify the files and/or directories that contain

# documented source files. You may enter file names like "myfile.cpp" or

# directories like "/usr/src/myproject". Separate the files or directories

# with spaces.

Alexis

r22

INPUT = ./libsrc

Alexis

r14

# This tag can be used to specify the character encoding of the source files

# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is

# also the default input encoding. Doxygen uses libiconv (or the iconv built

# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for

# the list of possible encodings.

INPUT_ENCODING = UTF-8

# If the value of the INPUT tag contains directories, you can use the

# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

# and *.h) to filter out the source-files in the directories. If left

# blank the following patterns are tested:

# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx

# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90

FILE_PATTERNS = *.c \

*.cc \

*.cxx \

*.cpp \

*.c++ \

*.d \

*.java \

*.ii \

*.ixx \

*.ipp \

*.i++ \

*.inl \

*.h \

*.hh \

*.hxx \

*.hpp \

*.h++ \

*.idl \

*.odl \

*.cs \

*.php \

*.php3 \

*.inc \

*.m \

*.mm \

*.dox \

*.py \

*.f90 \

*.f \

*.vhd \

*.vhdl

# The RECURSIVE tag can be used to turn specify whether or not subdirectories

# should be searched for input files as well. Possible values are YES and NO.

# If left blank NO is used.

Alexis

r22

RECURSIVE = YES

Alexis

r14

# The EXCLUDE tag can be used to specify files and/or directories that should

# excluded from the INPUT source files. This way you can easily exclude a

# subdirectory from a directory tree whose root is specified with the INPUT tag.

EXCLUDE =

# The EXCLUDE_SYMLINKS tag can be used select whether or not files or

# directories that are symbolic links (a Unix filesystem feature) are excluded

# from the input.

EXCLUDE_SYMLINKS = NO

# If the value of the INPUT tag contains directories, you can use the

# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

# certain files from those directories. Note that the wildcards are matched

# against the file with absolute path, so to exclude all test directories

# for example use the pattern */test/*

EXCLUDE_PATTERNS =

# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names

# (namespaces, classes, functions, etc.) that should be excluded from the

# output. The symbol name can be a fully qualified name, a word, or if the

# wildcard * is used, a substring. Examples: ANamespace, AClass,

# AClass::ANamespace, ANamespace::*Test

EXCLUDE_SYMBOLS =

# The EXAMPLE_PATH tag can be used to specify one or more files or

# directories that contain example code fragments that are included (see

# the \include command).

EXAMPLE_PATH =

# If the value of the EXAMPLE_PATH tag contains directories, you can use the

# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

# and *.h) to filter out the source-files in the directories. If left

# blank all files are included.

EXAMPLE_PATTERNS = *

# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

# searched for input files to be used with the \include or \dontinclude

# commands irrespective of the value of the RECURSIVE tag.

# Possible values are YES and NO. If left blank NO is used.

EXAMPLE_RECURSIVE = NO

# The IMAGE_PATH tag can be used to specify one or more files or

# directories that contain image that are included in the documentation (see

# the \image command).

IMAGE_PATH =

# The INPUT_FILTER tag can be used to specify a program that doxygen should

# invoke to filter for each input file. Doxygen will invoke the filter program

# by executing (via popen()) the command <filter> <input-file>, where <filter>

# is the value of the INPUT_FILTER tag, and <input-file> is the name of an

# input file. Doxygen will then use the output that the filter program writes

# to standard output. If FILTER_PATTERNS is specified, this tag will be

# ignored.

INPUT_FILTER =

# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

# basis. Doxygen will compare the file name with each pattern and apply the

# filter if there is a match. The filters are a list of the form:

# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER

# is applied to all files.

FILTER_PATTERNS =

# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

# INPUT_FILTER) will be used to filter the input files when producing source

# files to browse (i.e. when SOURCE_BROWSER is set to YES).

FILTER_SOURCE_FILES = NO

#---------------------------------------------------------------------------

# configuration options related to source browsing

#---------------------------------------------------------------------------

# If the SOURCE_BROWSER tag is set to YES then a list of source files will

# be generated. Documented entities will be cross-referenced with these sources.

# Note: To get rid of all source code in the generated output, make sure also

# VERBATIM_HEADERS is set to NO.

SOURCE_BROWSER = YES

# Setting the INLINE_SOURCES tag to YES will include the body

# of functions and classes directly in the documentation.

INLINE_SOURCES = YES

# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

# doxygen to hide any special comment blocks from generated source code

# fragments. Normal C and C++ comments will always remain visible.

STRIP_CODE_COMMENTS = YES

# If the REFERENCED_BY_RELATION tag is set to YES

# then for each documented function all documented

# functions referencing it will be listed.

REFERENCED_BY_RELATION = NO

# If the REFERENCES_RELATION tag is set to YES

# then for each documented function all documented entities

# called/used by that function will be listed.

REFERENCES_RELATION = NO

# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

# link to the source code. Otherwise they will link to the documentation.

REFERENCES_LINK_SOURCE = YES

# If the USE_HTAGS tag is set to YES then the references to source code

# will point to the HTML generated by the htags(1) tool instead of doxygen

# built-in source browser. The htags tool is part of GNU's global source

# tagging system (see http://www.gnu.org/software/global/global.html). You

# will need version 4.8.6 or higher.

USE_HTAGS = NO

# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

# will generate a verbatim copy of the header file for each class for

# which an include is specified. Set to NO to disable this.

VERBATIM_HEADERS = YES

#---------------------------------------------------------------------------

# configuration options related to the alphabetical class index

#---------------------------------------------------------------------------

# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

# of all compounds will be generated. Enable this if the project

# contains a lot of classes, structs, unions or interfaces.

ALPHABETICAL_INDEX = YES

# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

# in which this list will be split (can be a number in the range [1..20])

COLS_IN_ALPHA_INDEX = 5

# In case all classes in a project start with a common prefix, all

# classes will be put under the same header in the alphabetical index.

# The IGNORE_PREFIX tag can be used to specify one or more prefixes that

# should be ignored while generating the index headers.

IGNORE_PREFIX =

#---------------------------------------------------------------------------

# configuration options related to the HTML output

#---------------------------------------------------------------------------

# If the GENERATE_HTML tag is set to YES (the default) Doxygen will

# generate HTML output.

GENERATE_HTML = YES

# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

# If a relative path is entered the value of OUTPUT_DIRECTORY will be

# put in front of it. If left blank `html' will be used as the default path.

HTML_OUTPUT = html

# The HTML_FILE_EXTENSION tag can be used to specify the file extension for

# each generated HTML page (for example: .htm,.php,.asp). If it is left blank

# doxygen will generate files with .html extension.

HTML_FILE_EXTENSION = .html

# The HTML_HEADER tag can be used to specify a personal HTML header for

# each generated HTML page. If it is left blank doxygen will generate a

# standard header.

HTML_HEADER =

# The HTML_FOOTER tag can be used to specify a personal HTML footer for

# each generated HTML page. If it is left blank doxygen will generate a

# standard footer.

HTML_FOOTER =

# The HTML_STYLESHEET tag can be used to specify a user-defined cascading

# style sheet that is used by each HTML page. It can be used to

# fine-tune the look of the HTML output. If the tag is left blank doxygen

# will generate a default style sheet. Note that doxygen will try to copy

# the style sheet file to the HTML output directory, so don't put your own

# stylesheet in the HTML output directory as well, or it will be erased!

HTML_STYLESHEET =

# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.

# Doxygen will adjust the colors in the stylesheet and background images

# according to this color. Hue is specified as an angle on a colorwheel,

# see http://en.wikipedia.org/wiki/Hue for more information.

# For instance the value 0 represents red, 60 is yellow, 120 is green,

# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.

# The allowed range is 0 to 359.

HTML_COLORSTYLE_HUE = 220

# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of

# the colors in the HTML output. For a value of 0 the output will use

# grayscales only. A value of 255 will produce the most vivid colors.

HTML_COLORSTYLE_SAT = 100

# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to

# the luminance component of the colors in the HTML output. Values below

# 100 gradually make the output lighter, whereas values above 100 make

# the output darker. The value divided by 100 is the actual gamma applied,

# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,

# and 100 does not change the gamma.

HTML_COLORSTYLE_GAMMA = 80

# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML

# page will contain the date and time when the page was generated. Setting

# this to NO can help when comparing the output of multiple runs.

HTML_TIMESTAMP = YES

# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

# files or namespaces will be aligned in HTML using tables. If set to

# NO a bullet list will be used.

HTML_ALIGN_MEMBERS = YES

# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML

# documentation will contain sections that can be hidden and shown after the

# page has loaded. For this to work a browser that supports

# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox

# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

HTML_DYNAMIC_SECTIONS = YES

# If the GENERATE_DOCSET tag is set to YES, additional index files

# will be generated that can be used as input for Apple's Xcode 3

# integrated development environment, introduced with OSX 10.5 (Leopard).

# To create a documentation set, doxygen will generate a Makefile in the

# HTML output directory. Running make will produce the docset in that

# directory and running "make install" will install the docset in

# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find

# it at startup.

# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html

# for more information.

GENERATE_DOCSET = NO

# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the

# feed. A documentation feed provides an umbrella under which multiple

# documentation sets from a single provider (such as a company or product suite)

# can be grouped.

DOCSET_FEEDNAME = "Doxygen generated docs"

# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that

# should uniquely identify the documentation set bundle. This should be a

# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen

# will append .docset to the name.

DOCSET_BUNDLE_ID = org.doxygen.Project

# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify

# the documentation publisher. This should be a reverse domain-name style

# string, e.g. com.mycompany.MyDocSet.documentation.

DOCSET_PUBLISHER_ID = org.doxygen.Publisher

# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.

DOCSET_PUBLISHER_NAME = Publisher

# If the GENERATE_HTMLHELP tag is set to YES, additional index files

# will be generated that can be used as input for tools like the

# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)

# of the generated HTML documentation.

GENERATE_HTMLHELP = NO

# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

# be used to specify the file name of the resulting .chm file. You

# can add a path in front of the file if the result should not be

# written to the html output directory.

CHM_FILE =

# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

# be used to specify the location (absolute path including file name) of

# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

# the HTML help compiler on the generated index.hhp.

HHC_LOCATION =

# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

# controls if a separate .chi index file is generated (YES) or that

# it should be included in the master .chm file (NO).

GENERATE_CHI = NO

# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING

# is used to encode HtmlHelp index (hhk), content (hhc) and project file

# content.

CHM_INDEX_ENCODING =

# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

# controls whether a binary table of contents is generated (YES) or a

# normal table of contents (NO) in the .chm file.

BINARY_TOC = NO

# The TOC_EXPAND flag can be set to YES to add extra items for group members

# to the contents of the HTML help documentation and to the tree view.

TOC_EXPAND = NO

# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and

# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated

# that can be used as input for Qt's qhelpgenerator to generate a

# Qt Compressed Help (.qch) of the generated HTML documentation.

GENERATE_QHP = NO

# If the QHG_LOCATION tag is specified, the QCH_FILE tag can

# be used to specify the file name of the resulting .qch file.

# The path specified is relative to the HTML output folder.

QCH_FILE =

# The QHP_NAMESPACE tag specifies the namespace to use when generating

# Qt Help Project output. For more information please see

# http://doc.trolltech.com/qthelpproject.html#namespace

QHP_NAMESPACE = org.doxygen.Project

# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating

# Qt Help Project output. For more information please see

# http://doc.trolltech.com/qthelpproject.html#virtual-folders

QHP_VIRTUAL_FOLDER = doc

# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to

# add. For more information please see

# http://doc.trolltech.com/qthelpproject.html#custom-filters

QHP_CUST_FILTER_NAME =

# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the

# custom filter to add. For more information please see

# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">

# Qt Help Project / Custom Filters</a>.

QHP_CUST_FILTER_ATTRS =

# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this

# project's

# filter section matches.

# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">

# Qt Help Project / Filter Attributes</a>.

QHP_SECT_FILTER_ATTRS =

# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can

# be used to specify the location of Qt's qhelpgenerator.

# If non-empty doxygen will try to run qhelpgenerator on the generated

# .qhp file.

QHG_LOCATION =

# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files

# will be generated, which together with the HTML files, form an Eclipse help

# plugin. To install this plugin and make it available under the help contents

# menu in Eclipse, the contents of the directory containing the HTML and XML

# files needs to be copied into the plugins directory of eclipse. The name of

# the directory within the plugins directory should be the same as

# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before

# the help appears.

GENERATE_ECLIPSEHELP = NO

# A unique identifier for the eclipse help plugin. When installing the plugin

# the directory name containing the HTML and XML files should also have

# this name.

ECLIPSE_DOC_ID = org.doxygen.Project

# The DISABLE_INDEX tag can be used to turn on/off the condensed index at

# top of each HTML page. The value NO (the default) enables the index and

# the value YES disables it.

DISABLE_INDEX = NO

# This tag can be used to set the number of enum values (range [1..20])

# that doxygen will group on one line in the generated HTML documentation.

ENUM_VALUES_PER_LINE = 4

# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index

# structure should be generated to display hierarchical information.

# If the tag value is set to YES, a side panel will be generated

# containing a tree-like index structure (just like the one that

# is generated for HTML Help). For this to work a browser that supports

# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).

# Windows users are probably better off using the HTML help feature.

GENERATE_TREEVIEW = NO

# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,

# and Class Hierarchy pages using a tree view instead of an ordered list.

USE_INLINE_TREES = NO

# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

# used to set the initial width (in pixels) of the frame in which the tree

# is shown.

TREEVIEW_WIDTH = 250

# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open

# links to external symbols imported via tag files in a separate window.

EXT_LINKS_IN_WINDOW = NO

# Use this tag to change the font size of Latex formulas included

# as images in the HTML documentation. The default is 10. Note that

# when you change the font size after a successful doxygen run you need

# to manually remove any form_*.png images from the HTML output directory

# to force them to be regenerated.

FORMULA_FONTSIZE = 10

# Use the FORMULA_TRANPARENT tag to determine whether or not the images

# generated for formulas are transparent PNGs. Transparent PNGs are

# not supported properly for IE 6.0, but are supported on all modern browsers.

# Note that when changing this option you need to delete any form_*.png files

# in the HTML output before the changes have effect.

FORMULA_TRANSPARENT = YES

# When the SEARCHENGINE tag is enabled doxygen will generate a search box

# for the HTML output. The underlying search engine uses javascript

# and DHTML and should work on any modern browser. Note that when using

# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets

# (GENERATE_DOCSET) there is already a search function so this one should

# typically be disabled. For large projects the javascript based search engine

# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

SEARCHENGINE = YES

# When the SERVER_BASED_SEARCH tag is enabled the search engine will be

# implemented using a PHP enabled web server instead of at the web client

# using Javascript. Doxygen will generate the search PHP script and index

# file to put on the web server. The advantage of the server

# based approach is that it scales better to large projects and allows

# full text search. The disadvances is that it is more difficult to setup

# and does not have live searching capabilities.

SERVER_BASED_SEARCH = NO

#---------------------------------------------------------------------------

# configuration options related to the LaTeX output

#---------------------------------------------------------------------------

# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

# generate Latex output.

GENERATE_LATEX = YES

# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

# If a relative path is entered the value of OUTPUT_DIRECTORY will be

# put in front of it. If left blank `latex' will be used as the default path.

LATEX_OUTPUT = latex

# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

# invoked. If left blank `latex' will be used as the default command name.

# Note that when enabling USE_PDFLATEX this option is only used for

# generating bitmaps for formulas in the HTML output, but not in the

# Makefile that is written to the output directory.

LATEX_CMD_NAME = latex

# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

# generate index for LaTeX. If left blank `makeindex' will be used as the

# default command name.

MAKEINDEX_CMD_NAME = makeindex

# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

# LaTeX documents. This may be useful for small projects and may help to

# save some trees in general.

COMPACT_LATEX = YES

# The PAPER_TYPE tag can be used to set the paper type that is used

# by the printer. Possible values are: a4, a4wide, letter, legal and

# executive. If left blank a4wide will be used.

PAPER_TYPE = a4wide

# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

# packages that should be included in the LaTeX output.

EXTRA_PACKAGES =

# The LATEX_HEADER tag can be used to specify a personal LaTeX header for

# the generated latex document. The header should contain everything until

# the first chapter. If it is left blank doxygen will generate a

# standard header. Notice: only use this tag if you know what you are doing!

LATEX_HEADER =

# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

# is prepared for conversion to pdf (using ps2pdf). The pdf file will

# contain links (just like the HTML output) instead of page references

# This makes the output suitable for online browsing using a pdf viewer.

PDF_HYPERLINKS = YES

# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

# plain latex in the generated Makefile. Set this option to YES to get a

# higher quality PDF documentation.

USE_PDFLATEX = YES

# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

# command to the generated LaTeX files. This will instruct LaTeX to keep

# running if errors occur, instead of asking the user for help.

# This option is also used when generating formulas in HTML.

LATEX_BATCHMODE = NO

# If LATEX_HIDE_INDICES is set to YES then doxygen will not

# include the index chapters (such as File Index, Compound Index, etc.)

# in the output.

LATEX_HIDE_INDICES = NO

# If LATEX_SOURCE_CODE is set to YES then doxygen will include

# source code with syntax highlighting in the LaTeX output.

# Note that which sources are shown also depends on other settings

# such as SOURCE_BROWSER.

LATEX_SOURCE_CODE = NO

#---------------------------------------------------------------------------

# configuration options related to the RTF output

#---------------------------------------------------------------------------

# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

# The RTF output is optimized for Word 97 and may not look very pretty with

# other RTF readers or editors.

GENERATE_RTF = NO

# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

# If a relative path is entered the value of OUTPUT_DIRECTORY will be

# put in front of it. If left blank `rtf' will be used as the default path.

RTF_OUTPUT = rtf

# If the COMPACT_RTF tag is set to YES Doxygen generates more compact

# RTF documents. This may be useful for small projects and may help to

# save some trees in general.

COMPACT_RTF = NO

# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

# will contain hyperlink fields. The RTF file will

# contain links (just like the HTML output) instead of page references.

# This makes the output suitable for online browsing using WORD or other

# programs which support those fields.

# Note: wordpad (write) and others do not support links.

RTF_HYPERLINKS = NO

# Load stylesheet definitions from file. Syntax is similar to doxygen's

# config file, i.e. a series of assignments. You only have to provide

# replacements, missing definitions are set to their default value.

RTF_STYLESHEET_FILE =

# Set optional variables used in the generation of an rtf document.

# Syntax is similar to doxygen's config file.

RTF_EXTENSIONS_FILE =

#---------------------------------------------------------------------------

# configuration options related to the man page output

#---------------------------------------------------------------------------

# If the GENERATE_MAN tag is set to YES (the default) Doxygen will

# generate man pages

GENERATE_MAN = NO

# The MAN_OUTPUT tag is used to specify where the man pages will be put.

# If a relative path is entered the value of OUTPUT_DIRECTORY will be

# put in front of it. If left blank `man' will be used as the default path.

MAN_OUTPUT = man

# The MAN_EXTENSION tag determines the extension that is added to

# the generated man pages (default is the subroutine's section .3)

MAN_EXTENSION = .3

# If the MAN_LINKS tag is set to YES and Doxygen generates man output,

# then it will generate one additional man file for each entity

# documented in the real man page(s). These additional files

# only source the real man page, but without them the man command

# would be unable to find the correct page. The default is NO.

MAN_LINKS = NO

#---------------------------------------------------------------------------

# configuration options related to the XML output

#---------------------------------------------------------------------------

# If the GENERATE_XML tag is set to YES Doxygen will

# generate an XML file that captures the structure of

# the code including all documentation.

GENERATE_XML = NO

# The XML_OUTPUT tag is used to specify where the XML pages will be put.

# If a relative path is entered the value of OUTPUT_DIRECTORY will be

# put in front of it. If left blank `xml' will be used as the default path.

XML_OUTPUT = xml

# The XML_SCHEMA tag can be used to specify an XML schema,

# which can be used by a validating XML parser to check the

# syntax of the XML files.

XML_SCHEMA =

# The XML_DTD tag can be used to specify an XML DTD,

# which can be used by a validating XML parser to check the

# syntax of the XML files.

XML_DTD =

# If the XML_PROGRAMLISTING tag is set to YES Doxygen will

# dump the program listings (including syntax highlighting

# and cross-referencing information) to the XML output. Note that

# enabling this will significantly increase the size of the XML output.

XML_PROGRAMLISTING = YES

#---------------------------------------------------------------------------

# configuration options for the AutoGen Definitions output

#---------------------------------------------------------------------------

# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

# generate an AutoGen Definitions (see autogen.sf.net) file

# that captures the structure of the code including all

# documentation. Note that this feature is still experimental

# and incomplete at the moment.

GENERATE_AUTOGEN_DEF = NO

#---------------------------------------------------------------------------

# configuration options related to the Perl module output

#---------------------------------------------------------------------------

# If the GENERATE_PERLMOD tag is set to YES Doxygen will

# generate a Perl module file that captures the structure of

# the code including all documentation. Note that this

# feature is still experimental and incomplete at the

# moment.

GENERATE_PERLMOD = NO

# If the PERLMOD_LATEX tag is set to YES Doxygen will generate

# the necessary Makefile rules, Perl scripts and LaTeX code to be able

# to generate PDF and DVI output from the Perl module output.

PERLMOD_LATEX = NO

# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

# nicely formatted so it can be parsed by a human reader. This is useful

# if you want to understand what is going on. On the other hand, if this

# tag is set to NO the size of the Perl module output will be much smaller

# and Perl will parse it just the same.

PERLMOD_PRETTY = YES

# The names of the make variables in the generated doxyrules.make file

# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

# This is useful so different doxyrules.make files included by the same

# Makefile don't overwrite each other's variables.

PERLMOD_MAKEVAR_PREFIX =

#---------------------------------------------------------------------------

# Configuration options related to the preprocessor

#---------------------------------------------------------------------------

# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

# evaluate all C-preprocessor directives found in the sources and include

# files.

ENABLE_PREPROCESSING = YES

# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

# names in the source code. If set to NO (the default) only conditional

# compilation will be performed. Macro expansion can be done in a controlled

# way by setting EXPAND_ONLY_PREDEF to YES.

MACRO_EXPANSION = NO

# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

# then the macro expansion is limited to the macros specified with the

# PREDEFINED and EXPAND_AS_DEFINED tags.

EXPAND_ONLY_PREDEF = NO

# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

# in the INCLUDE_PATH (see below) will be search if a #include is found.

SEARCH_INCLUDES = YES

# The INCLUDE_PATH tag can be used to specify one or more directories that

# contain include files that are not input files but should be processed by

# the preprocessor.

INCLUDE_PATH =

# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

# patterns (like *.h and *.hpp) to filter out the header-files in the

# directories. If left blank, the patterns specified with FILE_PATTERNS will

# be used.

INCLUDE_FILE_PATTERNS =

# The PREDEFINED tag can be used to specify one or more macro names that

# are defined before the preprocessor is started (similar to the -D option of

# gcc). The argument of the tag is a list of macros of the form: name

# or name=definition (no spaces). If the definition and the = are

# omitted =1 is assumed. To prevent a macro definition from being

# undefined via #undef or recursively expanded use the := operator

# instead of the = operator.

PREDEFINED =

# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

# this tag can be used to specify a list of macro names that should be expanded.

# The macro definition that is found in the sources will be used.

# Use the PREDEFINED tag if you want to use a different macro definition.

EXPAND_AS_DEFINED =

# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

# doxygen's preprocessor will remove all function-like macros that are alone

# on a line, have an all uppercase name, and do not end with a semicolon. Such

# function macros are typically used for boiler-plate code, and will confuse

# the parser if not removed.

SKIP_FUNCTION_MACROS = YES

#---------------------------------------------------------------------------

# Configuration::additions related to external references

#---------------------------------------------------------------------------

# The TAGFILES option can be used to specify one or more tagfiles.

# Optionally an initial location of the external documentation

# can be added for each tagfile. The format of a tag file without

# this location is as follows:

# TAGFILES = file1 file2 ...

# Adding location for the tag files is done as follows:

# TAGFILES = file1=loc1 "file2 = loc2" ...

# where "loc1" and "loc2" can be relative or absolute paths or

# URLs. If a location is present for each tag, the installdox tool

# does not have to be run to correct the links.

# Note that each tag file must have a unique name

# (where the name does NOT include the path)

# If a tag file is not located in the directory in which doxygen

# is run, you must also specify the path to the tagfile here.

TAGFILES =

# When a file name is specified after GENERATE_TAGFILE, doxygen will create

# a tag file that is based on the input files it reads.

GENERATE_TAGFILE =

# If the ALLEXTERNALS tag is set to YES all external classes will be listed

# in the class index. If set to NO only the inherited external classes

# will be listed.

ALLEXTERNALS = NO

# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

# in the modules index. If set to NO, only the current project's groups will

# be listed.

EXTERNAL_GROUPS = YES

# The PERL_PATH should be the absolute path and name of the perl script

# interpreter (i.e. the result of `which perl').

PERL_PATH = /usr/bin/perl

#---------------------------------------------------------------------------

# Configuration options related to the dot tool

#---------------------------------------------------------------------------

# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

# or super classes. Setting the tag to NO turns the diagrams off. Note that

# this option is superseded by the HAVE_DOT option below. This is only a

# fallback. It is recommended to install and use dot, since it yields more

# powerful graphs.

CLASS_DIAGRAMS = YES

# You can define message sequence charts within doxygen comments using the \msc

# command. Doxygen will then run the mscgen tool (see

# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the

# documentation. The MSCGEN_PATH tag allows you to specify the directory where

# the mscgen tool resides. If left empty the tool is assumed to be found in the

# default search path.

MSCGEN_PATH =

# If set to YES, the inheritance and collaboration graphs will hide

# inheritance and usage relations if the target is undocumented

# or is not a class.

HIDE_UNDOC_RELATIONS = YES

# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

# available from the path. This tool is part of Graphviz, a graph visualization

# toolkit from AT&T and Lucent Bell Labs. The other options in this section

# have no effect if this option is set to NO (the default)

HAVE_DOT = NO

# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is

# allowed to run in parallel. When set to 0 (the default) doxygen will

# base this on the number of processors available in the system. You can set it

# explicitly to a value larger than 0 to get control over the balance

# between CPU load and processing speed.

DOT_NUM_THREADS = 0

# By default doxygen will write a font called FreeSans.ttf to the output

# directory and reference it in all dot files that doxygen generates. This

# font does not include all possible unicode characters however, so when you need

# these (or just want a differently looking font) you can specify the font name

# using DOT_FONTNAME. You need need to make sure dot is able to find the font,

# which can be done by putting it in a standard location or by setting the

# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory

# containing the font.

DOT_FONTNAME = FreeSans.ttf

# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.

# The default size is 10pt.

DOT_FONTSIZE = 10

# By default doxygen will tell dot to use the output directory to look for the

# FreeSans.ttf font (which doxygen will put there itself). If you specify a

# different font using DOT_FONTNAME you can set the path where dot

# can find it using this tag.

DOT_FONTPATH =

# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

# will generate a graph for each documented class showing the direct and

# indirect inheritance relations. Setting this tag to YES will force the

# the CLASS_DIAGRAMS tag to NO.

CLASS_GRAPH = YES

# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

# will generate a graph for each documented class showing the direct and

# indirect implementation dependencies (inheritance, containment, and

# class references variables) of the class with other documented classes.

COLLABORATION_GRAPH = YES

# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

# will generate a graph for groups, showing the direct groups dependencies

GROUP_GRAPHS = YES

# If the UML_LOOK tag is set to YES doxygen will generate inheritance and

# collaboration diagrams in a style similar to the OMG's Unified Modeling

# Language.

UML_LOOK = NO

# If set to YES, the inheritance and collaboration graphs will show the

# relations between templates and their instances.

TEMPLATE_RELATIONS = NO

# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

# tags are set to YES then doxygen will generate a graph for each documented

# file showing the direct and indirect include dependencies of the file with

# other documented files.

INCLUDE_GRAPH = YES

# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

# HAVE_DOT tags are set to YES then doxygen will generate a graph for each

# documented header file showing the documented files that directly or

# indirectly include this file.

INCLUDED_BY_GRAPH = YES

# If the CALL_GRAPH and HAVE_DOT options are set to YES then

# doxygen will generate a call dependency graph for every global function

# or class method. Note that enabling this option will significantly increase

# the time of a run. So in most cases it will be better to enable call graphs

# for selected functions only using the \callgraph command.

CALL_GRAPH = NO

# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then

# doxygen will generate a caller dependency graph for every global function

# or class method. Note that enabling this option will significantly increase

# the time of a run. So in most cases it will be better to enable caller

# graphs for selected functions only using the \callergraph command.

CALLER_GRAPH = NO

# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

# will graphical hierarchy of all classes instead of a textual one.

GRAPHICAL_HIERARCHY = YES

# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

# then doxygen will show the dependencies a directory has on other directories

# in a graphical way. The dependency relations are determined by the #include

# relations between the files in the directories.

DIRECTORY_GRAPH = YES

# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

# generated by dot. Possible values are png, jpg, or gif

# If left blank png will be used.

DOT_IMAGE_FORMAT = png

# The tag DOT_PATH can be used to specify the path where the dot tool can be

# found. If left blank, it is assumed the dot tool can be found in the path.

DOT_PATH =

# The DOTFILE_DIRS tag can be used to specify one or more directories that

# contain dot files that are included in the documentation (see the

# \dotfile command).

DOTFILE_DIRS =

# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of

# nodes that will be shown in the graph. If the number of nodes in a graph

# becomes larger than this value, doxygen will truncate the graph, which is

# visualized by representing a node as a red box. Note that doxygen if the

# number of direct children of the root node in a graph is already larger than

# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note

# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

DOT_GRAPH_MAX_NODES = 50

# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

# graphs generated by dot. A depth value of 3 means that only nodes reachable

# from the root by following a path via at most 3 edges will be shown. Nodes

# that lay further from the root node will be omitted. Note that setting this

# option to 1 or 2 may greatly reduce the computation time needed for large

# code bases. Also note that the size of a graph can be further restricted by

# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

MAX_DOT_GRAPH_DEPTH = 0

# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

# background. This is disabled by default, because dot on Windows does not

# seem to support this out of the box. Warning: Depending on the platform used,

# enabling this option may lead to badly anti-aliased labels on the edges of

# a graph (i.e. they become hard to read).

DOT_TRANSPARENT = NO

# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

# files in one run (i.e. multiple -o and -T options on the command line). This

# makes dot run faster, but since only newer versions of dot (>1.8.10)

# support this, this feature is disabled by default.

DOT_MULTI_TARGETS = NO

# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

# generate a legend page explaining the meaning of the various boxes and

# arrows in the dot generated graphs.

GENERATE_LEGEND = YES

# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

# remove the intermediate dot files that are used to generate

# the various graphs.

DOT_CLEANUP = YES

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages