##// END OF EJS Templates
Fusion avec JC
Fusion avec JC

File last commit:

r245:0fbfdf431a95 alexis
r256:8da48dff5aa9 merge alexis
Show More
leon3mp.vhd
329 lines | 12.7 KiB | text/x-vhdl | VhdlLexer
Alexis Jeandet
MINI-LFR board added
r245 -----------------------------------------------------------------------------
-- LEON3 Demonstration design
-- Copyright (C) 2004 Jiri Gaisler, Gaisler Research
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2 of the License, or
-- (at your option) any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
------------------------------------------------------------------------------
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
LIBRARY grlib;
USE grlib.amba.ALL;
USE grlib.stdlib.ALL;
LIBRARY techmap;
USE techmap.gencomp.ALL;
LIBRARY gaisler;
USE gaisler.memctrl.ALL;
USE gaisler.leon3.ALL;
USE gaisler.uart.ALL;
USE gaisler.misc.ALL;
USE gaisler.spacewire.ALL; -- PLE
LIBRARY esa;
USE esa.memoryctrl.ALL;
USE work.config.ALL;
LIBRARY lpp;
--use lpp.lpp_amba.all;
USE lpp.lpp_memory.ALL;
USE lpp.lpp_ad_conv.ALL;
USE lpp.lpp_top_lfr_pkg.ALL;
--use lpp.lpp_uart.all;
--use lpp.lpp_matrix.all;
--use lpp.lpp_delay.all;
--use lpp.lpp_fft.all;
--use lpp.fft_components.all;
use lpp.iir_filter.all;
USE lpp.general_purpose.ALL;
--use lpp.Filtercfg.all;
USE lpp.lpp_lfr_time_management.ALL; -- PLE
--use lpp.lpp_lfr_spectral_matrices_DMA.all; -- PLE
ENTITY leon3mp IS
GENERIC (
fabtech : INTEGER := CFG_FABTECH;
memtech : INTEGER := CFG_MEMTECH;
padtech : INTEGER := CFG_PADTECH;
clktech : INTEGER := CFG_CLKTECH;
disas : INTEGER := CFG_DISAS; -- Enable disassembly to console
dbguart : INTEGER := CFG_DUART; -- Print UART on console
pclow : INTEGER := CFG_PCLOW
);
PORT (
clk50MHz : IN STD_ULOGIC;
clk49_152MHz : IN STD_ULOGIC;
reset : IN STD_ULOGIC;
errorn : OUT STD_ULOGIC;
-- UART AHB ---------------------------------------------------------------
ahbrxd : IN STD_ULOGIC; -- DSU rx data
ahbtxd : OUT STD_ULOGIC; -- DSU tx data
-- UART APB ---------------------------------------------------------------
urxd1 : IN STD_ULOGIC; -- UART1 rx data
utxd1 : OUT STD_ULOGIC; -- UART1 tx data
-- RAM --------------------------------------------------------------------
address : OUT STD_LOGIC_VECTOR(19 DOWNTO 0);
data : INOUT STD_LOGIC_VECTOR(31 DOWNTO 0);
nSRAM_BE0 : OUT STD_LOGIC;
nSRAM_BE1 : OUT STD_LOGIC;
nSRAM_BE2 : OUT STD_LOGIC;
nSRAM_BE3 : OUT STD_LOGIC;
nSRAM_WE : OUT STD_LOGIC;
nSRAM_CE : OUT STD_LOGIC;
nSRAM_OE : OUT STD_LOGIC;
-- SPW --------------------------------------------------------------------
spw1_din : IN STD_LOGIC; -- PLE
spw1_sin : IN STD_LOGIC; -- PLE
spw1_dout : OUT STD_LOGIC; -- PLE
spw1_sout : OUT STD_LOGIC; -- PLE
-- ADC --------------------------------------------------------------------
bias_fail_sw : OUT STD_LOGIC;
ADC_OEB_bar_CH : OUT STD_LOGIC_VECTOR(7 DOWNTO 0);
ADC_smpclk : OUT STD_LOGIC;
ADC_data : IN STD_LOGIC_VECTOR(13 DOWNTO 0);
---------------------------------------------------------------------------
led : OUT STD_LOGIC_VECTOR(2 DOWNTO 0)
);
END;
ARCHITECTURE Behavioral OF leon3mp IS
--constant maxahbmsp : integer := CFG_NCPU+CFG_AHB_UART+
-- CFG_GRETH+CFG_AHB_JTAG;
CONSTANT maxahbmsp : INTEGER := CFG_NCPU+
CFG_AHB_UART+
CFG_GRETH+
CFG_AHB_JTAG
+2; -- 1 is for the SpaceWire module grspw2, which is a master
CONSTANT maxahbm : INTEGER := maxahbmsp;
--Clk & Rst g�n�
SIGNAL vcc : STD_LOGIC_VECTOR(4 DOWNTO 0);
SIGNAL gnd : STD_LOGIC_VECTOR(4 DOWNTO 0);
SIGNAL clk2x : STD_ULOGIC;
SIGNAL lclk2x : STD_ULOGIC;
SIGNAL lclk25MHz : STD_ULOGIC;
SIGNAL lclk50MHz : STD_ULOGIC;
SIGNAL lclk100MHz : STD_ULOGIC;
SIGNAL clkm : STD_ULOGIC;
SIGNAL rstn : STD_ULOGIC;
SIGNAL rstraw : STD_ULOGIC;
SIGNAL pciclk : STD_ULOGIC;
SIGNAL sdclkl : STD_ULOGIC;
SIGNAL cgi : clkgen_in_type;
SIGNAL cgo : clkgen_out_type;
--- AHB / APB
SIGNAL apbi : apb_slv_in_type;
SIGNAL apbo : apb_slv_out_vector := (OTHERS => apb_none);
SIGNAL ahbsi : ahb_slv_in_type;
SIGNAL ahbso : ahb_slv_out_vector := (OTHERS => ahbs_none);
SIGNAL ahbmi : ahb_mst_in_type;
SIGNAL ahbmo : ahb_mst_out_vector := (OTHERS => ahbm_none);
--UART
SIGNAL ahbuarti : uart_in_type;
SIGNAL ahbuarto : uart_out_type;
SIGNAL apbuarti : uart_in_type;
SIGNAL apbuarto : uart_out_type;
--MEM CTRLR
SIGNAL memi : memory_in_type;
SIGNAL memo : memory_out_type;
SIGNAL wpo : wprot_out_type;
SIGNAL sdo : sdram_out_type;
SIGNAL ramcs : STD_ULOGIC;
--IRQ
SIGNAL irqi : irq_in_vector(0 TO CFG_NCPU-1);
SIGNAL irqo : irq_out_vector(0 TO CFG_NCPU-1);
--Timer
SIGNAL gpti : gptimer_in_type;
SIGNAL gpto : gptimer_out_type;
--GPIO
SIGNAL gpioi : gpio_in_type;
SIGNAL gpioo : gpio_out_type;
--DSU
SIGNAL dbgi : l3_debug_in_vector(0 TO CFG_NCPU-1);
SIGNAL dbgo : l3_debug_out_vector(0 TO CFG_NCPU-1);
SIGNAL dsui : dsu_in_type;
SIGNAL dsuo : dsu_out_type;
---------------------------------------------------------------------
--- AJOUT TEST ------------------------Signaux----------------------
---------------------------------------------------------------------
---------------------------------------------------------------------
CONSTANT IOAEN : INTEGER := CFG_CAN;
CONSTANT boardfreq : INTEGER := 25000; -- the board frequency (lclk) is 50 MHz
-- time management signal
SIGNAL coarse_time : STD_LOGIC_VECTOR(31 DOWNTO 0);
SIGNAL fine_time : STD_LOGIC_VECTOR(31 DOWNTO 0);
-- Spacewire signals
SIGNAL dtmp : STD_ULOGIC; -- PLE
SIGNAL stmp : STD_ULOGIC; -- PLE
SIGNAL rxclko : STD_ULOGIC; -- PLE
SIGNAL swni : grspw_in_type; -- PLE
SIGNAL swno : grspw_out_type; -- PLE
SIGNAL clkmn : STD_ULOGIC; -- PLE
SIGNAL txclk : STD_ULOGIC; -- PLE 2013 02 14
-- AD Converter RHF1401
SIGNAL sample : Samples14v(7 DOWNTO 0);
SIGNAL sample_val : STD_LOGIC;
-----------------------------------------------------------------------------
SIGNAL ADC_OEB_bar_CH_s : STD_LOGIC_VECTOR(7 DOWNTO 0);
BEGIN
----------------------------------------------------------------------
--- Reset and Clock generation -------------------------------------
----------------------------------------------------------------------
vcc <= (OTHERS => '1'); gnd <= (OTHERS => '0');
cgi.pllctrl <= "00"; cgi.pllrst <= rstraw;
rst0 : rstgen PORT MAP (reset, clkm, cgo.clklock, rstn, rstraw);
clk_pad : clkpad GENERIC MAP (tech => padtech) PORT MAP (clk50MHz, lclk100MHz);
clkgen0 : clkgen -- clock generator
GENERIC MAP (clktech, CFG_CLKMUL, CFG_CLKDIV, CFG_MCTRL_SDEN,
CFG_CLK_NOFB, 0, 0, 0, boardfreq, 0, 0, CFG_OCLKDIV)
PORT MAP (lclk25MHz, lclk25MHz, clkm, clkmn, clk2x, sdclkl, pciclk, cgi, cgo);
PROCESS(lclk100MHz)
BEGIN
IF lclk100MHz'EVENT AND lclk100MHz = '1' THEN
lclk50MHz <= NOT lclk50MHz;
END IF;
END PROCESS;
PROCESS(lclk50MHz)
BEGIN
IF lclk50MHz'EVENT AND lclk50MHz = '1' THEN
lclk25MHz <= NOT lclk25MHz;
END IF;
END PROCESS;
lclk2x <= lclk50MHz;
----------------------------------------------------------------------
--- Memory controllers ---------------------------------------------
----------------------------------------------------------------------
memctrlr : mctrl GENERIC MAP (
hindex => 0,
pindex => 0,
paddr => 0,
srbanks => 1
)
PORT MAP (rstn, clkm, memi, memo, ahbsi, ahbso(0), apbi, apbo(0), wpo, sdo);
memi.brdyn <= '1';
memi.bexcn <= '1';
memi.writen <= '1';
memi.wrn <= "1111";
memi.bwidth <= "10";
bdr : FOR i IN 0 TO 3 GENERATE
data_pad : iopadv GENERIC MAP (tech => padtech, width => 8)
PORT MAP (
data(31-i*8 DOWNTO 24-i*8),
memo.data(31-i*8 DOWNTO 24-i*8),
memo.bdrive(i),
memi.data(31-i*8 DOWNTO 24-i*8));
END GENERATE;
addr_pad : outpadv GENERIC MAP (width => 20, tech => padtech)
PORT MAP (address, memo.address(21 DOWNTO 2));
rams_pad : outpad GENERIC MAP (tech => padtech) PORT MAP (nSRAM_CE, NOT(memo.ramsn(0)));
oen_pad : outpad GENERIC MAP (tech => padtech) PORT MAP (nSRAM_OE, memo.ramoen(0));
nBWE_pad : outpad GENERIC MAP (tech => padtech) PORT MAP (nSRAM_WE, memo.writen);
nBWa_pad : outpad GENERIC MAP (tech => padtech) PORT MAP (nSRAM_BE0, memo.mben(3));
nBWb_pad : outpad GENERIC MAP (tech => padtech) PORT MAP (nSRAM_BE1, memo.mben(2));
nBWc_pad : outpad GENERIC MAP (tech => padtech) PORT MAP (nSRAM_BE2, memo.mben(1));
nBWd_pad : outpad GENERIC MAP (tech => padtech) PORT MAP (nSRAM_BE3, memo.mben(0));
----------------------------------------------------------------------
--- AHB CONTROLLER -------------------------------------------------
----------------------------------------------------------------------
ahb0 : ahbctrl -- AHB arbiter/multiplexer
GENERIC MAP (defmast => CFG_DEFMST, split => CFG_SPLIT,
rrobin => CFG_RROBIN, ioaddr => CFG_AHBIO,
ioen => IOAEN, nahbm => maxahbm, nahbs => 8)
PORT MAP (rstn, clkm, ahbmi, ahbmo, ahbsi, ahbso);
----------------------------------------------------------------------
--- AHB UART -------------------------------------------------------
----------------------------------------------------------------------
dcomgen : IF CFG_AHB_UART = 1 GENERATE
dcom0 : ahbuart
GENERIC MAP ( hindex => 3, pindex => 4, paddr => 4)
PORT MAP ( rstn, clkm, ahbuarti, ahbuarto, apbi, apbo(4), ahbmi, ahbmo(3));
dsurx_pad : inpad GENERIC MAP (tech => padtech) PORT MAP (ahbrxd, ahbuarti.rxd);
dsutx_pad : outpad GENERIC MAP (tech => padtech) PORT MAP (ahbtxd, ahbuarto.txd);
led(0) <= NOT ahbuarti.rxd;
led(1) <= NOT ahbuarto.txd;
END GENERATE;
nouah : IF CFG_AHB_UART = 0 GENERATE apbo(4) <= apb_none; END GENERATE;
----------------------------------------------------------------------
--- APB Bridge -----------------------------------------------------
----------------------------------------------------------------------
apb0 : apbctrl -- AHB/APB bridge
GENERIC MAP (hindex => 1, haddr => CFG_APBADDR)
PORT MAP (rstn, clkm, ahbsi, ahbso(1), apbi, apbo);
----------------------------------------------------------------------
--- GPT Timer ------------------------------------------------------
----------------------------------------------------------------------
gpt : IF CFG_GPT_ENABLE /= 0 GENERATE
timer0 : gptimer -- timer unit
GENERIC MAP (pindex => 3, paddr => 3, pirq => CFG_GPT_IRQ,
sepirq => CFG_GPT_SEPIRQ, sbits => CFG_GPT_SW, ntimers => CFG_GPT_NTIM,
nbits => CFG_GPT_TW)
PORT MAP (rstn, clkm, apbi, apbo(3), gpti, gpto);
gpti.dhalt <= dsuo.tstop;
gpti.extclk <= '0';
END GENERATE;
notim : IF CFG_GPT_ENABLE = 0 GENERATE apbo(3) <= apb_none; END GENERATE;
----------------------------------------------------------------------
--- APB UART -------------------------------------------------------
----------------------------------------------------------------------
ua1 : IF CFG_UART1_ENABLE /= 0 GENERATE
uart1 : apbuart -- UART 1
GENERIC MAP (pindex => 1, paddr => 1, pirq => 2, console => dbguart,
fifosize => CFG_UART1_FIFO)
PORT MAP (rstn, clkm, apbi, apbo(1), apbuarti, apbuarto);
apbuarti.rxd <= urxd1;
apbuarti.extclk <= '0';
utxd1 <= apbuarto.txd;
apbuarti.ctsn <= '0';
END GENERATE;
noua0 : IF CFG_UART1_ENABLE = 0 GENERATE apbo(1) <= apb_none; END GENERATE;
END Behavioral;