##// END OF EJS Templates
Added Simulator target to run code on x86 and debug functions....
Added Simulator target to run code on x86 and debug functions. Fixed some bugs on terminal widget.

File last commit:

r18:bd9ab647f70a default
r63:68dfbccdd813 dev_alexis
Show More
lpc17xx_spi.h
314 lines | 10.9 KiB | text/x-c | CLexer
/***********************************************************************//**
* @file : lpc17xx_spi.h
* @brief : Contains all macro definitions and function prototypes
* support for SPI firmware library on LPC17xx
* @version : 1.0
* @date : 3. April. 2009
* @author : HieuNguyen
**************************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
**************************************************************************/
/* Peripheral group ----------------------------------------------------------- */
/** @defgroup SPI
* @ingroup LPC1700CMSIS_FwLib_Drivers
* @{
*/
#ifndef LPC17XX_SPI_H_
#define LPC17XX_SPI_H_
/* Includes ------------------------------------------------------------------- */
#include "LPC17xx.h"
#include "lpc_types.h"
#ifdef __cplusplus
extern "C"
{
#endif
/* Private Macros ------------------------------------------------------------- */
/** @defgroup SPI_Private_Macros
* @{
*/
/*********************************************************************//**
* Macro defines for SPI Control Register
**********************************************************************/
/** @defgroup SPI_REGISTER_BIT_DEFINITION
* @{
*/
/** Bit enable, the SPI controller sends and receives the number
* of bits selected by bits 11:8 */
#define SPI_SPCR_BIT_EN ((uint32_t)(1<<2))
/** Clock phase control bit */
#define SPI_SPCR_CPHA_SECOND ((uint32_t)(1<<3))
/** Clock polarity control bit */
#define SPI_SPCR_CPOL_LOW ((uint32_t)(1<<4))
/** SPI master mode enable */
#define SPI_SPCR_MSTR ((uint32_t)(1<<5))
/** LSB enable bit */
#define SPI_SPCR_LSBF ((uint32_t)(1<<6))
/** SPI interrupt enable bit */
#define SPI_SPCR_SPIE ((uint32_t)(1<<7))
/** When bit 2 of this register is 1, this field controls the
number of bits per transfer */
#define SPI_SPCR_BITS(n) ((n==0) ? ((uint32_t)0) : ((uint32_t)((n&0x0F)<<8)))
/** SPI Control bit mask */
#define SPI_SPCR_BITMASK ((uint32_t)(0xFFC))
/*********************************************************************//**
* Macro defines for SPI Status Register
**********************************************************************/
/** Slave abort */
#define SPI_SPSR_ABRT ((uint32_t)(1<<3))
/** Mode fault */
#define SPI_SPSR_MODF ((uint32_t)(1<<4))
/** Read overrun */
#define SPI_SPSR_ROVR ((uint32_t)(1<<5))
/** Write collision */
#define SPI_SPSR_WCOL ((uint32_t)(1<<6))
/** SPI transfer complete flag */
#define SPI_SPSR_SPIF ((uint32_t)(1<<7))
/** SPI Status bit mask */
#define SPI_SPSR_BITMASK ((uint32_t)(0xF8))
/*********************************************************************//**
* Macro defines for SPI Data Register
**********************************************************************/
/** SPI Data low bit-mask */
#define SPI_SPDR_LO_MASK ((uint32_t)(0xFF))
/** SPI Data high bit-mask */
#define SPI_SPDR_HI_MASK ((uint32_t)(0xFF00))
/** SPI Data bit-mask */
#define SPI_SPDR_BITMASK ((uint32_t)(0xFFFF))
/*********************************************************************//**
* Macro defines for SPI Clock Counter Register
**********************************************************************/
/** SPI clock counter setting */
#define SPI_SPCCR_COUNTER(n) ((uint32_t)(n&0xFF))
/** SPI clock counter bit-mask */
#define SPI_SPCCR_BITMASK ((uint32_t)(0xFF))
/***********************************************************************
* Macro defines for SPI Test Control Register
**********************************************************************/
/** SPI Test bit */
#define SPI_SPTCR_TEST_MASK ((uint32_t)(0xFE))
/** SPI Test register bit mask */
#define SPI_SPTCR_BITMASK ((uint32_t)(0xFE))
/*********************************************************************//**
* Macro defines for SPI Test Status Register
**********************************************************************/
/** Slave abort */
#define SPI_SPTSR_ABRT ((uint32_t)(1<<3))
/** Mode fault */
#define SPI_SPTSR_MODF ((uint32_t)(1<<4))
/** Read overrun */
#define SPI_SPTSR_ROVR ((uint32_t)(1<<5))
/** Write collision */
#define SPI_SPTSR_WCOL ((uint32_t)(1<<6))
/** SPI transfer complete flag */
#define SPI_SPTSR_SPIF ((uint32_t)(1<<7))
/** SPI Status bit mask */
#define SPI_SPTSR_MASKBIT ((uint32_t)(0xF8))
/*********************************************************************//**
* Macro defines for SPI Interrupt Register
**********************************************************************/
/** SPI interrupt flag */
#define SPI_SPINT_INTFLAG ((uint32_t)(1<<0))
/** SPI interrupt register bit mask */
#define SPI_SPINT_BITMASK ((uint32_t)(0x01))
/**
* @}
*/
/**
* @}
*/
/* Public Types --------------------------------------------------------------- */
/** @defgroup SPI_Public_Types
* @{
*/
/** @brief SPI configuration structure */
typedef struct {
uint32_t Databit; /** Databit number, should be SPI_DATABIT_x,
where x is in range from 8 - 16 */
uint32_t CPHA; /** Clock phase, should be:
- SPI_CPHA_FIRST: first clock edge
- SPI_CPHA_SECOND: second clock edge */
uint32_t CPOL; /** Clock polarity, should be:
- SPI_CPOL_HI: high level
- SPI_CPOL_LO: low level */
uint32_t Mode; /** SPI mode, should be:
- SPI_MASTER_MODE: Master mode
- SPI_SLAVE_MODE: Slave mode */
uint32_t DataOrder; /** Data order, should be:
- SPI_DATA_MSB_FIRST: MSB first
- SPI_DATA_LSB_FIRST: LSB first */
uint32_t ClockRate; /** Clock rate,in Hz, should not exceed
(SPI peripheral clock)/8 */
} SPI_CFG_Type;
/**
* @brief SPI Transfer Type definitions
*/
typedef enum {
SPI_TRANSFER_POLLING = 0, /**< Polling transfer */
SPI_TRANSFER_INTERRUPT /**< Interrupt transfer */
} SPI_TRANSFER_Type;
/**
* @brief SPI Data configuration structure definitions
*/
typedef struct {
void *tx_data; /**< Pointer to transmit data */
void *rx_data; /**< Pointer to transmit data */
uint32_t length; /**< Length of transfer data */
uint32_t counter; /**< Data counter index */
uint32_t status; /**< Current status of SPI activity */
void (*callback)(void); /**< Pointer to Call back function when transmission complete
used in interrupt transfer mode */
} SPI_DATA_SETUP_Type;
/**
* @}
*/
/* Public Macros -------------------------------------------------------------- */
/** @defgroup SPI_Public_Macros
* @{
*/
/** Macro to determine if it is valid SPI port number */
#define PARAM_SPIx(n) (((uint32_t *)n)==((uint32_t *)LPC_SPI))
/*********************************************************************//**
* SPI configuration parameter defines
**********************************************************************/
/** Clock phase control bit */
#define SPI_CPHA_FIRST ((uint32_t)(0))
#define SPI_CPHA_SECOND SPI_SPCR_CPHA_SECOND
#define PARAM_SPI_CPHA(n) ((n==SPI_CPHA_FIRST) || (n==SPI_CPHA_SECOND))
/** Clock polarity control bit */
#define SPI_CPOL_HI ((uint32_t)(0))
#define SPI_CPOL_LO SPI_SPCR_CPOL_LOW
#define PARAM_SPI_CPOL(n) ((n==SPI_CPOL_HI) || (n==SPI_CPOL_LO))
/** SPI master mode enable */
#define SPI_SLAVE_MODE ((uint32_t)(0))
#define SPI_MASTER_MODE SPI_SPCR_MSTR
#define PARAM_SPI_MODE(n) ((n==SPI_SLAVE_MODE) || (n==SPI_MASTER_MODE))
/** LSB enable bit */
#define SPI_DATA_MSB_FIRST ((uint32_t)(0))
#define SPI_DATA_LSB_FIRST SPI_SPCR_LSBF
#define PARAM_SPI_DATA_ORDER(n) ((n==SPI_DATA_MSB_FIRST) || (n==SPI_DATA_LSB_FIRST))
/** SPI data bit number defines */
#define SPI_DATABIT_16 SPI_SPCR_BITS(0) /*!< Databit number = 16 */
#define SPI_DATABIT_8 SPI_SPCR_BITS(0x08) /*!< Databit number = 8 */
#define SPI_DATABIT_9 SPI_SPCR_BITS(0x09) /*!< Databit number = 9 */
#define SPI_DATABIT_10 SPI_SPCR_BITS(0x0A) /*!< Databit number = 10 */
#define SPI_DATABIT_11 SPI_SPCR_BITS(0x0B) /*!< Databit number = 11 */
#define SPI_DATABIT_12 SPI_SPCR_BITS(0x0C) /*!< Databit number = 12 */
#define SPI_DATABIT_13 SPI_SPCR_BITS(0x0D) /*!< Databit number = 13 */
#define SPI_DATABIT_14 SPI_SPCR_BITS(0x0E) /*!< Databit number = 14 */
#define SPI_DATABIT_15 SPI_SPCR_BITS(0x0F) /*!< Databit number = 15 */
#define PARAM_SPI_DATABIT(n) ((n==SPI_DATABIT_16) || (n==SPI_DATABIT_8) \
|| (n==SPI_DATABIT_9) || (n==SPI_DATABIT_10) \
|| (n==SPI_DATABIT_11) || (n==SPI_DATABIT_12) \
|| (n==SPI_DATABIT_13) || (n==SPI_DATABIT_14) \
|| (n==SPI_DATABIT_15))
/*********************************************************************//**
* SPI Status Flag defines
**********************************************************************/
/** Slave abort */
#define SPI_STAT_ABRT SPI_SPSR_ABRT
/** Mode fault */
#define SPI_STAT_MODF SPI_SPSR_MODF
/** Read overrun */
#define SPI_STAT_ROVR SPI_SPSR_ROVR
/** Write collision */
#define SPI_STAT_WCOL SPI_SPSR_WCOL
/** SPI transfer complete flag */
#define SPI_STAT_SPIF SPI_SPSR_SPIF
#define PARAM_SPI_STAT(n) ((n==SPI_STAT_ABRT) || (n==SPI_STAT_MODF) \
|| (n==SPI_STAT_ROVR) || (n==SPI_STAT_WCOL) \
|| (n==SPI_STAT_SPIF))
/* SPI Status Implementation definitions */
#define SPI_STAT_DONE (1UL<<8) /**< Done */
#define SPI_STAT_ERROR (1UL<<9) /**< Error */
/**
* @}
*/
/* Public Functions ----------------------------------------------------------- */
/** @defgroup SPI_Public_Functions
* @{
*/
void SPI_SetClock (LPC_SPI_TypeDef *SPIx, uint32_t target_clock);
void SPI_DeInit(LPC_SPI_TypeDef *SPIx);
void SPI_Init(LPC_SPI_TypeDef *SPIx, SPI_CFG_Type *SPI_ConfigStruct);
void SPI_ConfigStructInit(SPI_CFG_Type *SPI_InitStruct);
void SPI_SendData(LPC_SPI_TypeDef *SPIx, uint16_t Data);
uint16_t SPI_ReceiveData(LPC_SPI_TypeDef *SPIx);
int32_t SPI_ReadWrite (LPC_SPI_TypeDef *SPIx, SPI_DATA_SETUP_Type *dataCfg, SPI_TRANSFER_Type xfType);
void SPI_IntCmd(LPC_SPI_TypeDef *SPIx, FunctionalState NewState);
IntStatus SPI_GetIntStatus (LPC_SPI_TypeDef *SPIx);
void SPI_ClearIntPending(LPC_SPI_TypeDef *SPIx);
uint32_t SPI_GetStatus(LPC_SPI_TypeDef *SPIx);
FlagStatus SPI_CheckStatus (uint32_t inputSPIStatus, uint8_t SPIStatus);
void SPI_StdIntHandler(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* LPC17XX_SPI_H_ */
/**
* @}
*/
/* --------------------------------- End Of File ------------------------------ */