##// END OF EJS Templates
HG_REPOSITORIES » LPP » INSTRUMENTATION » VHD_Lib
RSS

Clone from https://hephaistos.lpp.polytechnique.fr/rhodecode/HG_REPOSITORIES/LPP/INSTRUMENTATION/USERS/PELLION/VHD_Lib

Fusion
Alexis Jeandet -
r247:871de6e8ea2a merge alexis
parent child
Show More
Show file before | Show file after | Hide comments
@@ -0,0 +1,68
1 ------------------------------------------------------------------------------
2 -- This file is a part of the LPP VHDL IP LIBRARY
3 -- Copyright (C) 2009 - 2013, Laboratory of Plasmas Physic - CNRS
4 --
5 -- This program is free software; you can redistribute it and/or modify
6 -- it under the terms of the GNU General Public License as published by
7 -- the Free Software Foundation; either version 3 of the License, or
8 -- (at your option) any later version.
9 --
10 -- This program is distributed in the hope that it will be useful,
11 -- but WITHOUT ANY WARRANTY; without even the implied warranty of
12 -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 -- GNU General Public License for more details.
14 --
15 -- You should have received a copy of the GNU General Public License
16 -- along with this program; if not, write to the Free Software
17 -- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 ------------------------------------------------------------------------------
19 -- Author : Alexis Jeandet
20 -- Mail : alexis.jeandet@member.fsf.org
21 ------------------------------------------------------------------------------
22 --
23 -- This module implements the SyncSignal generator explained in:
24 -- Data Transfer between Asynchronous Clock Domains without Pain
25 -- from Markus Schutti, Markus Pfaff, Richard Hagelauer
26 -- http://www-micrel.deis.unibo.it/~benini/files/SNUG/paper9_final.pdf
27 -- see page 4
28 --
29 --
30
31 library IEEE;
32 use IEEE.STD_LOGIC_1164.ALL;
33
34 entity CrossDomainSyncGen is
35 Port (
36 reset : in STD_LOGIC;
37 ClockS : in STD_LOGIC;
38 ClockF : in STD_LOGIC;
39 SyncSignal : out STD_LOGIC
40 );
41 end CrossDomainSyncGen;
42
43 architecture AR_CrossDomainSyncGen of CrossDomainSyncGen is
44
45 signal FFSYNC : std_logic_vector(2 downto 0);
46
47 begin
48
49 SyncSignal <= FFSYNC(2);
50
51 process(reset,ClockF)
52 begin
53 if reset = '0' then
54 FFSYNC <= (others => '0');
55 elsif ClockF'event and ClockF = '1' then
56 FFSYNC(0) <= ClockS;
57 FFSYNC(1) <= FFSYNC(0);
58 FFSYNC(2) <= FFSYNC(1);
59 end if;
60 end process;
61
62 end AR_CrossDomainSyncGen;
63
64
65
66
67
68
Show file before | Show file after | Hide comments
@@ -0,0 +1,343
1 library IEEE;
2 use IEEE.STD_LOGIC_1164.ALL;
3 use IEEE.NUMERIC_STD.ALL;
4 library lpp;
5 use lpp.lpp_ad_conv.all;
6 use lpp.lpp_amba.all;
7 use lpp.apb_devices_list.all;
8 use lpp.general_purpose.all;
9 use lpp.Rocket_PCM_Encoder.all;
10
11 use work.config.all;
12
13
14 entity DC_ACQ_TOP is
15 generic(
16 WordSize : integer := 8;
17 WordCnt : integer := 144;
18 MinFCount : integer := 64;
19 EnableSR : integer := 1;
20 CstDATA : integer := 0;
21 FakeADC : integer := 0;
22 CDS : integer := 0
23 );
24 port(
25
26 reset : in std_logic;
27 clk : in std_logic;
28 SyncSig : in STD_LOGIC;
29 minorF : in std_logic;
30 majorF : in std_logic;
31 sclk : in std_logic;
32 WordClk : in std_logic;
33
34 DC_ADC_Sclk : out std_logic;
35 DC_ADC_IN : in std_logic_vector(1 downto 0);
36 DC_ADC_ClkDiv : out std_logic;
37 DC_ADC_FSynch : out std_logic;
38 SET_RESET0 : out std_logic;
39 SET_RESET1 : out std_logic;
40
41 AMR1X : out std_logic_vector(23 downto 0);
42 AMR1Y : out std_logic_vector(23 downto 0);
43 AMR1Z : out std_logic_vector(23 downto 0);
44
45 AMR2X : out std_logic_vector(23 downto 0);
46 AMR2Y : out std_logic_vector(23 downto 0);
47 AMR2Z : out std_logic_vector(23 downto 0);
48
49 AMR3X : out std_logic_vector(23 downto 0);
50 AMR3Y : out std_logic_vector(23 downto 0);
51 AMR3Z : out std_logic_vector(23 downto 0);
52
53 AMR4X : out std_logic_vector(23 downto 0);
54 AMR4Y : out std_logic_vector(23 downto 0);
55 AMR4Z : out std_logic_vector(23 downto 0);
56
57 Temp1 : out std_logic_vector(23 downto 0);
58 Temp2 : out std_logic_vector(23 downto 0);
59 Temp3 : out std_logic_vector(23 downto 0);
60 Temp4 : out std_logic_vector(23 downto 0)
61 );
62 end DC_ACQ_TOP;
63
64 architecture Behavioral of DC_ACQ_TOP is
65
66 signal DC_ADC_SmplClk : std_logic;
67 signal LF_ADC_SmplClk : std_logic;
68 signal SET_RESET0_sig : std_logic;
69 signal SET_RESET1_sig : std_logic;
70 signal SET_RESET_counter : integer range 0 to 31:=0;
71
72 signal AMR1X_Sync : std_logic_vector(23 downto 0);
73 signal AMR1Y_Sync : std_logic_vector(23 downto 0);
74 signal AMR1Z_Sync : std_logic_vector(23 downto 0);
75
76 signal AMR2X_Sync : std_logic_vector(23 downto 0);
77 signal AMR2Y_Sync : std_logic_vector(23 downto 0);
78 signal AMR2Z_Sync : std_logic_vector(23 downto 0);
79
80 signal AMR3X_Sync : std_logic_vector(23 downto 0);
81 signal AMR3Y_Sync : std_logic_vector(23 downto 0);
82 signal AMR3Z_Sync : std_logic_vector(23 downto 0);
83
84 signal AMR4X_Sync : std_logic_vector(23 downto 0);
85 signal AMR4Y_Sync : std_logic_vector(23 downto 0);
86 signal AMR4Z_Sync : std_logic_vector(23 downto 0);
87
88 signal Temp1_Sync : std_logic_vector(23 downto 0);
89 signal Temp2_Sync : std_logic_vector(23 downto 0);
90 signal Temp3_Sync : std_logic_vector(23 downto 0);
91 signal Temp4_Sync : std_logic_vector(23 downto 0);
92
93 begin
94
95 ------------------------------------------------------------------
96 --
97 -- DC sampling clock generation
98 --
99 ------------------------------------------------------------------
100
101
102 DC_SMPL_CLK0 : entity work.LF_SMPL_CLK
103 --generic map(36)
104 generic map(288)
105 port map(
106 reset => reset,
107 wclk => WordClk,
108 SMPL_CLK => DC_ADC_SmplClk
109 );
110 ------------------------------------------------------------------
111
112
113
114
115 ------------------------------------------------------------------
116 --
117 -- DC ADC
118 --
119 ------------------------------------------------------------------
120 ADC1: IF CstDATA /= 1 GENERATE
121 ADC : IF FakeADC /=1 GENERATE
122
123 DC_ADC0 : DUAL_ADS1278_DRIVER
124 port map(
125 Clk => clk,
126 reset => reset,
127 SpiClk => DC_ADC_Sclk,
128 DIN => DC_ADC_IN,
129 SmplClk => DC_ADC_SmplClk,
130 OUT00 => AMR1X_Sync,
131 OUT01 => AMR1Y_Sync,
132 OUT02 => AMR1Z_Sync,
133 OUT03 => AMR2X_Sync,
134 OUT04 => AMR2Y_Sync,
135 OUT05 => AMR2Z_Sync,
136 OUT06 => Temp1_Sync,
137 OUT07 => Temp2_Sync,
138 OUT10 => AMR3X_Sync,
139 OUT11 => AMR3Y_Sync,
140 OUT12 => AMR3Z_Sync,
141 OUT13 => AMR4X_Sync,
142 OUT14 => AMR4Y_Sync,
143 OUT15 => AMR4Z_Sync,
144 OUT16 => Temp3_Sync,
145 OUT17 => Temp4_Sync,
146 FSynch => DC_ADC_FSynch
147 );
148 END GENERATE;
149
150 NOADC: IF FakeADC=1 GENERATE
151
152 DC_ADC0 : entity work.FAKE_DUAL_ADS1278_DRIVER
153 port map(
154 Clk => clk,
155 reset => reset,
156 SpiClk => DC_ADC_Sclk,
157 DIN => DC_ADC_IN,
158 SmplClk => DC_ADC_SmplClk,
159 OUT00 => AMR1X_Sync,
160 OUT01 => AMR1Y_Sync,
161 OUT02 => AMR1Z_Sync,
162 OUT03 => AMR2X_Sync,
163 OUT04 => AMR2Y_Sync,
164 OUT05 => AMR2Z_Sync,
165 OUT06 => Temp1_Sync,
166 OUT07 => Temp2_Sync,
167 OUT10 => AMR3X_Sync,
168 OUT11 => AMR3Y_Sync,
169 OUT12 => AMR3Z_Sync,
170 OUT13 => AMR4X_Sync,
171 OUT14 => AMR4Y_Sync,
172 OUT15 => AMR4Z_Sync,
173 OUT16 => Temp3_Sync,
174 OUT17 => Temp4_Sync,
175 FSynch => DC_ADC_FSynch
176 );
177 END GENERATE;
178
179 END GENERATE;
180 ------------------------------------------------------------------
181
182 NOADC: IF CstDATA = 1 GENERATE
183
184 AMR1X_Sync <= AMR1Xcst;
185 AMR1Y_Sync <= AMR1Ycst;
186 AMR1Z_Sync <= AMR1Zcst;
187 AMR2X_Sync <= AMR2Xcst;
188 AMR2Y_Sync <= AMR2Ycst;
189 AMR2Z_Sync <= AMR2Zcst;
190 Temp1_Sync <= Temp1cst;
191 Temp2_Sync <= Temp2cst;
192 AMR3X_Sync <= AMR3Xcst;
193 AMR3Y_Sync <= AMR3Ycst;
194 AMR3Z_Sync <= AMR3Zcst;
195 AMR4X_Sync <= AMR4Xcst;
196 AMR4Y_Sync <= AMR4Ycst;
197 AMR4Z_Sync <= AMR4Zcst;
198 Temp3_Sync <= Temp3cst;
199 Temp4_Sync <= Temp4cst;
200
201
202
203
204
205 END GENERATE;
206
207
208
209
210 ------------------------------------------------------------------
211 --
212 -- SET/RESET GEN
213 --
214 ------------------------------------------------------------------
215
216 SR: IF EnableSR /=0 GENERATE
217 process(reset,DC_ADC_SmplClk)
218 begin
219 if reset = '0' then
220 SET_RESET0_sig <= '0';
221 elsif DC_ADC_SmplClk'event and DC_ADC_SmplClk = '0' then
222 if(SET_RESET_counter = 31) then
223 SET_RESET0_sig <= not SET_RESET0_sig;
224 SET_RESET_counter <= 0;
225 else
226 SET_RESET_counter <= SET_RESET_counter +1;
227 end if;
228 end if;
229 end process;
230
231 END GENERATE;
232 NOSR: IF EnableSR=0 GENERATE
233 SET_RESET0_sig <= '0';
234 END GENERATE;
235
236 SET_RESET1_sig <= SET_RESET0_sig;
237 SET_RESET0 <= SET_RESET0_sig;
238 SET_RESET1 <= SET_RESET1_sig;
239 ------------------------------------------------------------------
240 ------------------------------------------------------------------
241
242
243 ------------------------------------------------------------------
244 --
245 -- Cross domain clock synchronisation
246 --
247 ------------------------------------------------------------------
248
249 IF CDS =1 GENERATE
250
251 AMR1Xsync: entity work.Fast2SlowSync
252 generic map(N => 24)
253 port map( AMR1X_Sync,clk,sclk,SyncSig,AMR1X);
254 AMR1Ysync: entity work.Fast2SlowSync
255 generic map(N => 24)
256 port map( AMR1Y_Sync,clk,sclk,SyncSig,AMR1Y);
257 AMR1Zsync: entity work.Fast2SlowSync
258 generic map(N => 24)
259 port map( AMR1Z_Sync,clk,sclk,SyncSig,AMR1Z);
260
261 AMR2Xsync: entity work.Fast2SlowSync
262 generic map(N => 24)
263 port map( AMR2X_Sync,clk,sclk,SyncSig,AMR2X);
264 AMR2Ysync: entity work.Fast2SlowSync
265 generic map(N => 24)
266 port map( AMR2Y_Sync,clk,sclk,SyncSig,AMR2Y);
267 AMR2Zsync: entity work.Fast2SlowSync
268 generic map(N => 24)
269 port map( AMR2Z_Sync,clk,sclk,SyncSig,AMR2Z);
270
271 AMR3Xsync: entity work.Fast2SlowSync
272 generic map(N => 24)
273 port map( AMR3X_Sync,clk,sclk,SyncSig,AMR3X);
274 AMR3Ysync: entity work.Fast2SlowSync
275 generic map(N => 24)
276 port map( AMR3Y_Sync,clk,sclk,SyncSig,AMR3Y);
277 AMR3Zsync: entity work.Fast2SlowSync
278 generic map(N => 24)
279 port map( AMR3Z_Sync,clk,sclk,SyncSig,AMR3Z);
280
281
282 AMR4Xsync: entity work.Fast2SlowSync
283 generic map(N => 24)
284 port map( AMR4X_Sync,clk,sclk,SyncSig,AMR4X);
285 AMR4Ysync: entity work.Fast2SlowSync
286 generic map(N => 24)
287 port map( AMR4Y_Sync,clk,sclk,SyncSig,AMR4Y);
288 AMR4Zsync: entity work.Fast2SlowSync
289 generic map(N => 24)
290 port map( AMR4Z_Sync,clk,sclk,SyncSig,AMR4Z);
291
292
293 TEMP1sync: entity work.Fast2SlowSync
294 generic map(N => 24)
295 port map( TEMP1_Sync,clk,sclk,SyncSig,TEMP1);
296 TEMP2sync: entity work.Fast2SlowSync
297 generic map(N => 24)
298 port map( TEMP2_Sync,clk,sclk,SyncSig,TEMP2);
299 TEMP3sync: entity work.Fast2SlowSync
300 generic map(N => 24)
301 port map( TEMP3_Sync,clk,sclk,SyncSig,TEMP3);
302 TEMP4sync: entity work.Fast2SlowSync
303 generic map(N => 24)
304 port map( TEMP4_Sync,clk,sclk,SyncSig,TEMP4);
305
306 END GENERATE;
307
308 IF CDS /= 1 GENERATE
309
310
311 AMR1X_Sync <= AMR1X;
312 AMR1Y_Sync <= AMR1Y;
313 AMR1Z_Sync <= AMR1Z;
314 AMR2X_Sync <= AMR2X;
315 AMR2Y_Sync <= AMR2Y;
316 AMR2Z_Sync <= AMR2Z;
317 Temp1_Sync <= Temp1;
318 Temp2_Sync <= Temp2;
319 AMR3X_Sync <= AMR3X;
320 AMR3Y_Sync <= AMR3Y;
321 AMR3Z_Sync <= AMR3Z;
322 AMR4X_Sync <= AMR4X;
323 AMR4Y_Sync <= AMR4Y;
324 AMR4Z_Sync <= AMR4Z;
325 Temp3_Sync <= Temp3;
326 Temp4_Sync <= Temp4;
327
328 END GENERATE;
329 ------------------------------------------------------------------
330
331
332 end Behavioral;
333
334
335
336
337
338
339
340
341
342
343
Show file before | Show file after | Hide comments
@@ -0,0 +1,243
1 -- ADS1274_DRIVER.vhd
2 library IEEE;
3 use IEEE.std_logic_1164.all;
4 use IEEE.numeric_std.all;
5 library lpp;
6 use lpp.lpp_ad_conv.all;
7 use lpp.general_purpose.all;
8
9
10
11
12
13 entity FAKE_DUAL_ADS1278_DRIVER is
14 generic
15 (
16 SCLKDIV : integer range 2 to 256 :=16
17 );
18 port(
19 Clk : in std_logic;
20 reset : in std_logic;
21 SpiClk : out std_logic;
22 DIN : in std_logic_vector(1 downto 0);
23 SmplClk : in std_logic;
24 OUT00 : out std_logic_vector(23 downto 0);
25 OUT01 : out std_logic_vector(23 downto 0);
26 OUT02 : out std_logic_vector(23 downto 0);
27 OUT03 : out std_logic_vector(23 downto 0);
28 OUT04 : out std_logic_vector(23 downto 0);
29 OUT05 : out std_logic_vector(23 downto 0);
30 OUT06 : out std_logic_vector(23 downto 0);
31 OUT07 : out std_logic_vector(23 downto 0);
32 OUT10 : out std_logic_vector(23 downto 0);
33 OUT11 : out std_logic_vector(23 downto 0);
34 OUT12 : out std_logic_vector(23 downto 0);
35 OUT13 : out std_logic_vector(23 downto 0);
36 OUT14 : out std_logic_vector(23 downto 0);
37 OUT15 : out std_logic_vector(23 downto 0);
38 OUT16 : out std_logic_vector(23 downto 0);
39 OUT17 : out std_logic_vector(23 downto 0);
40 FSynch : out std_logic
41 );
42 end FAKE_DUAL_ADS1278_DRIVER;
43
44
45
46
47
48
49 architecture ar_FAKE_DUAL_ADS1278_DRIVER of FAKE_DUAL_ADS1278_DRIVER is
50 signal ShiftGeg0,ShiftGeg1 : std_logic_vector((8*24)-1 downto 0);
51 signal ShiftGeg20,ShiftGeg21 : std_logic_vector((8*24)-1 downto 0);
52 signal SmplClk_Reg : std_logic:= '0';
53 signal N : integer range 0 to (24*8) := 0;
54 signal SPI_CLk : std_logic;
55 signal SmplClk_clkd : std_logic:= '0';
56 signal OUT00_r : std_logic_vector(23 downto 0) := (others => '0');
57 signal OUT01_r : std_logic_vector(23 downto 0) := (others => '0');
58 signal OUT02_r : std_logic_vector(23 downto 0) := (others => '0');
59 signal OUT03_r : std_logic_vector(23 downto 0) := (others => '0');
60 signal OUT04_r : std_logic_vector(23 downto 0) := (others => '0');
61 signal OUT05_r : std_logic_vector(23 downto 0) := (others => '0');
62 signal OUT06_r : std_logic_vector(23 downto 0) := (others => '0');
63 signal OUT07_r : std_logic_vector(23 downto 0) := (others => '0');
64 signal OUT10_r : std_logic_vector(23 downto 0) := (others => '0');
65 signal OUT11_r : std_logic_vector(23 downto 0) := (others => '0');
66 signal OUT12_r : std_logic_vector(23 downto 0) := (others => '0');
67 signal OUT13_r : std_logic_vector(23 downto 0) := (others => '0');
68 signal OUT14_r : std_logic_vector(23 downto 0) := (others => '0');
69 signal OUT15_r : std_logic_vector(23 downto 0) := (others => '0');
70 signal OUT16_r : std_logic_vector(23 downto 0) := (others => '0');
71 signal OUT17_r : std_logic_vector(23 downto 0) := (others => '0');
72
73 begin
74
75
76 CLKDIV0 : Clk_Divider2
77 generic map(SCLKDIV)
78 port map(Clk,SPI_CLk);
79
80
81 FSynch <= SmplClk;
82 SpiClk <= SPI_CLk;
83
84 process(reset,SPI_CLk)
85 begin
86
87 if reset = '0' then
88 ShiftGeg0 <= (others => '0');
89 ShiftGeg1 <= (others => '0');
90 N <= 0;
91 OUT00_r <= (others => '0');
92 OUT01_r <= (others => '0');
93 OUT02_r <= (others => '0');
94 OUT03_r <= (others => '0');
95 OUT04_r <= (others => '0');
96 OUT05_r <= (others => '0');
97 OUT06_r <= (others => '0');
98 OUT07_r <= (others => '0');
99 OUT10_r <= (others => '0');
100 OUT11_r <= (others => '0');
101 OUT12_r <= (others => '0');
102 OUT13_r <= (others => '0');
103 OUT14_r <= (others => '0');
104 OUT15_r <= (others => '0');
105 OUT16_r <= (others => '0');
106 OUT17_r <= (others => '0');
107 ShiftGeg20 <= (others => '0');
108 ShiftGeg21 <= (others => '0');
109
110 elsif SPI_CLk'event and SPI_CLk = '1' then
111 if ((SmplClk_clkd = '1' and SmplClk_Reg = '0') or (N /= 0)) then
112 ShiftGeg20((8*24)-1 downto 0) <= ShiftGeg20((8*24)-2 downto 0) & '0';
113 ShiftGeg21((8*24)-1 downto 0) <= ShiftGeg21((8*24)-2 downto 0) & '0';
114 ShiftGeg0((8*24)-1 downto 0) <= ShiftGeg0((8*24)-2 downto 0) & ShiftGeg20((8*24)-1);
115 ShiftGeg1((8*24)-1 downto 0) <= ShiftGeg1((8*24)-2 downto 0) & ShiftGeg21((8*24)-1);
116 if N = ((24*8)-1) then
117 N <= 0;
118 OUT00_r <= std_logic_vector(UNSIGNED(OUT00_r) + 1);
119 OUT01_r <= std_logic_vector(UNSIGNED(OUT01_r) + 2);
120 OUT02_r <= std_logic_vector(UNSIGNED(OUT02_r) + 3);
121 OUT03_r <= std_logic_vector(UNSIGNED(OUT03_r) + 4);
122 OUT04_r <= std_logic_vector(UNSIGNED(OUT04_r) + 5);
123 OUT05_r <= std_logic_vector(UNSIGNED(OUT05_r) + 6);
124 OUT06_r <= std_logic_vector(UNSIGNED(OUT06_r) + 7);
125 OUT07_r <= std_logic_vector(UNSIGNED(OUT07_r) + 8);
126 OUT10_r <= std_logic_vector(UNSIGNED(OUT10_r) + 9);
127 OUT11_r <= std_logic_vector(UNSIGNED(OUT11_r) + 10);
128 OUT12_r <= std_logic_vector(UNSIGNED(OUT12_r) + 11);
129 OUT13_r <= std_logic_vector(UNSIGNED(OUT13_r) + 12);
130 OUT14_r <= std_logic_vector(UNSIGNED(OUT14_r) + 13);
131 OUT15_r <= std_logic_vector(UNSIGNED(OUT15_r) + 14);
132 OUT16_r <= std_logic_vector(UNSIGNED(OUT16_r) + 15);
133 OUT17_r <= std_logic_vector(UNSIGNED(OUT17_r) + 16);
134
135 ShiftGeg20((24*1)-1 downto (24*(1-1))) <= OUT00_r;
136 ShiftGeg20((24*2)-1 downto (24*(2-1))) <= OUT01_r;
137 ShiftGeg20((24*3)-1 downto (24*(3-1))) <= OUT02_r;
138 ShiftGeg20((24*4)-1 downto (24*(4-1))) <= OUT03_r;
139 ShiftGeg20((24*5)-1 downto (24*(5-1))) <= OUT04_r;
140 ShiftGeg20((24*6)-1 downto (24*(6-1))) <= OUT05_r;
141 ShiftGeg20((24*7)-1 downto (24*(7-1))) <= OUT06_r;
142 ShiftGeg20((24*8)-1 downto (24*(8-1))) <= OUT07_r;
143
144 ShiftGeg21((24*1)-1 downto (24*(1-1))) <= OUT10_r;
145 ShiftGeg21((24*2)-1 downto (24*(2-1))) <= OUT11_r;
146 ShiftGeg21((24*3)-1 downto (24*(3-1))) <= OUT12_r;
147 ShiftGeg21((24*4)-1 downto (24*(4-1))) <= OUT13_r;
148 ShiftGeg21((24*5)-1 downto (24*(5-1))) <= OUT14_r;
149 ShiftGeg21((24*6)-1 downto (24*(6-1))) <= OUT15_r;
150 ShiftGeg21((24*7)-1 downto (24*(7-1))) <= OUT16_r;
151 ShiftGeg21((24*8)-1 downto (24*(8-1))) <= OUT17_r;
152 else
153 N <= N+1;
154 end if;
155 end if;
156 end if;
157 end process;
158
159
160 process(SPI_CLk)
161 begin
162 if SPI_CLk'event and SPI_CLk ='0' then
163 SmplClk_clkd <= SmplClk;
164 SmplClk_Reg <= SmplClk_clkd;
165 end if;
166 end process;
167
168
169 process(clk,reset)
170 begin
171 if reset = '0' then
172 OUT00 <= (others => '0');
173 OUT01 <= (others => '0');
174 OUT02 <= (others => '0');
175 OUT03 <= (others => '0');
176 OUT04 <= (others => '0');
177 OUT05 <= (others => '0');
178 OUT06 <= (others => '0');
179 OUT07 <= (others => '0');
180
181 OUT10 <= (others => '0');
182 OUT11 <= (others => '0');
183 OUT12 <= (others => '0');
184 OUT13 <= (others => '0');
185 OUT14 <= (others => '0');
186 OUT15 <= (others => '0');
187 OUT16 <= (others => '0');
188 OUT17 <= (others => '0');
189 elsif clk'event and clk ='1' then
190 if N = 0 then
191 OUT00 <= ShiftGeg0((24*1)-1 downto (24*(1-1)));
192 OUT01 <= ShiftGeg0((24*2)-1 downto (24*(2-1)));
193 OUT02 <= ShiftGeg0((24*3)-1 downto (24*(3-1)));
194 OUT03 <= ShiftGeg0((24*4)-1 downto (24*(4-1)));
195 OUT04 <= ShiftGeg0((24*5)-1 downto (24*(5-1)));
196 OUT05 <= ShiftGeg0((24*6)-1 downto (24*(6-1)));
197 OUT06 <= ShiftGeg0((24*7)-1 downto (24*(7-1)));
198 OUT07 <= ShiftGeg0((24*8)-1 downto (24*(8-1)));
199
200 OUT10 <= ShiftGeg1((24*1)-1 downto (24*(1-1)));
201 OUT11 <= ShiftGeg1((24*2)-1 downto (24*(2-1)));
202 OUT12 <= ShiftGeg1((24*3)-1 downto (24*(3-1)));
203 OUT13 <= ShiftGeg1((24*4)-1 downto (24*(4-1)));
204 OUT14 <= ShiftGeg1((24*5)-1 downto (24*(5-1)));
205 OUT15 <= ShiftGeg1((24*6)-1 downto (24*(6-1)));
206 OUT16 <= ShiftGeg1((24*7)-1 downto (24*(7-1)));
207 OUT17 <= ShiftGeg1((24*8)-1 downto (24*(8-1)));
208
209 end if;
210 end if;
211 end process;
212
213 end ar_FAKE_DUAL_ADS1278_DRIVER;
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
Show file before | Show file after | Hide comments
@@ -0,0 +1,95
1 ------------------------------------------------------------------------------
2 -- This file is a part of the LPP VHDL IP LIBRARY
3 -- Copyright (C) 2009 - 2013, Laboratory of Plasmas Physic - CNRS
4 --
5 -- This program is free software; you can redistribute it and/or modify
6 -- it under the terms of the GNU General Public License as published by
7 -- the Free Software Foundation; either version 3 of the License, or
8 -- (at your option) any later version.
9 --
10 -- This program is distributed in the hope that it will be useful,
11 -- but WITHOUT ANY WARRANTY; without even the implied warranty of
12 -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 -- GNU General Public License for more details.
14 --
15 -- You should have received a copy of the GNU General Public License
16 -- along with this program; if not, write to the Free Software
17 -- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 ------------------------------------------------------------------------------
19 -- Author : Alexis Jeandet
20 -- Mail : alexis.jeandet@member.fsf.org
21 ------------------------------------------------------------------------------
22 --
23 -- This module implements the Fast to Slow clock transfer:
24 -- Data Transfer between Asynchronous Clock Domains without Pain
25 -- from Markus Schutti, Markus Pfaff, Richard Hagelauer
26 -- http://www-micrel.deis.unibo.it/~benini/files/SNUG/paper9_final.pdf
27 -- see page 6
28 --
29 --
30
31 library IEEE;
32 use IEEE.STD_LOGIC_1164.ALL;
33
34 entity Fast2SlowSync is
35 generic
36 (
37 N : integer range 0 to 256:=8
38 );
39 Port
40 (
41 Data : in STD_LOGIC_VECTOR (N-1 downto 0);
42 ClockF : in STD_LOGIC;
43 ClockS : in STD_LOGIC;
44 SyncSignal : in STD_LOGIC;
45 DataSinkF : out STD_LOGIC_VECTOR (N-1 downto 0)
46 );
47 end Fast2SlowSync;
48
49 architecture AR_Fast2SlowSync of Fast2SlowSync is
50
51 signal DataF : STD_LOGIC_VECTOR (N-1 downto 0);
52 signal DataFlocked : STD_LOGIC_VECTOR (N-1 downto 0);
53
54 signal MuxOut : STD_LOGIC_VECTOR (N-1 downto 0);
55
56 begin
57
58 MuxOut <= DataF when SyncSignal = '1' else
59 DataFlocked;
60
61 process(ClockF)
62 begin
63 if ClockF'event and ClockF = '1' then
64 DataF <= Data;
65 DataFlocked <= MuxOut;
66 end if;
67 end process;
68
69 process(ClockS)
70 begin
71 if ClockS'event and ClockS = '1' then
72 DataSinkF <= DataFlocked;
73 end if;
74 end process;
75
76 end AR_Fast2SlowSync;
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
Show file before | Show file after | Hide comments
@@ -0,0 +1,443
1 library ieee;
2 use ieee.std_logic_1164.all;
3 use IEEE.numeric_std.all;
4 library grlib, techmap;
5 use grlib.amba.all;
6 use grlib.amba.all;
7 use grlib.stdlib.all;
8 use techmap.gencomp.all;
9 use techmap.allclkgen.all;
10 library gaisler;
11 use gaisler.memctrl.all;
12 use gaisler.leon3.all;
13 use gaisler.uart.all;
14 use gaisler.misc.all;
15 --use gaisler.sim.all;
16 library lpp;
17 use lpp.lpp_ad_conv.all;
18 use lpp.lpp_amba.all;
19 use lpp.apb_devices_list.all;
20 use lpp.general_purpose.all;
21 use lpp.Rocket_PCM_Encoder.all;
22
23
24 use work.Convertisseur_config.all;
25
26
27 use work.config.all;
28 --==================================================================
29 --
30 --
31 -- FPGA FREQ = 48MHz
32 -- ADC Oscillator frequency = 4MHz
33 --
34 --
35 --==================================================================
36
37 entity ici4_OLD is
38 generic (
39 fabtech : integer := CFG_FABTECH;
40 memtech : integer := CFG_MEMTECH;
41 padtech : integer := CFG_PADTECH;
42 clktech : integer := CFG_CLKTECH;
43 WordSize : integer := 8; WordCnt : integer := 144;MinFCount : integer := 64
44 );
45 port (
46 reset : in std_ulogic;
47 clk : in std_ulogic;
48 sclk : in std_logic;
49 Gate : in std_logic;
50 MinF : in std_logic;
51 MajF : in std_logic;
52 Data : out std_logic;
53 DC_ADC_Sclk : out std_logic;
54 DC_ADC_IN : in std_logic_vector(1 downto 0);
55 DC_ADC_ClkDiv : out std_logic;
56 DC_ADC_FSynch : out std_logic;
57 SET_RESET0 : out std_logic;
58 SET_RESET1 : out std_logic;
59 LED : out std_logic
60 );
61 end;
62
63 architecture rtl of ici4_OLD is
64
65 signal clk_buf,reset_buf : std_logic;
66
67 Constant FramePlacerCount : integer := 2;
68
69 signal MinF_Inv : std_logic;
70 signal Gate_Inv : std_logic;
71 signal sclk_Inv : std_logic;
72 signal WordCount : integer range 0 to WordCnt-1;
73 signal WordClk : std_logic;
74
75 signal data_int : std_logic;
76
77 signal MuxOUT : std_logic_vector(WordSize-1 downto 0);
78 signal MuxIN : std_logic_vector((2*WordSize)-1 downto 0);
79 signal Sel : integer range 0 to 1;
80
81 signal AMR1X : std_logic_vector(23 downto 0);
82 signal AMR1Y : std_logic_vector(23 downto 0);
83 signal AMR1Z : std_logic_vector(23 downto 0);
84
85 signal AMR2X : std_logic_vector(23 downto 0);
86 signal AMR2Y : std_logic_vector(23 downto 0);
87 signal AMR2Z : std_logic_vector(23 downto 0);
88
89 signal AMR3X : std_logic_vector(23 downto 0);
90 signal AMR3Y : std_logic_vector(23 downto 0);
91 signal AMR3Z : std_logic_vector(23 downto 0);
92
93 signal AMR4X : std_logic_vector(23 downto 0);
94 signal AMR4Y : std_logic_vector(23 downto 0);
95 signal AMR4Z : std_logic_vector(23 downto 0);
96
97 signal AMR1X_ADC : std_logic_vector(23 downto 0);
98 signal AMR1Y_ADC : std_logic_vector(23 downto 0);
99 signal AMR1Z_ADC : std_logic_vector(23 downto 0);
100
101 signal AMR2X_ADC : std_logic_vector(23 downto 0);
102 signal AMR2Y_ADC : std_logic_vector(23 downto 0);
103 signal AMR2Z_ADC : std_logic_vector(23 downto 0);
104
105 signal AMR3X_ADC : std_logic_vector(23 downto 0);
106 signal AMR3Y_ADC : std_logic_vector(23 downto 0);
107 signal AMR3Z_ADC : std_logic_vector(23 downto 0);
108
109 signal AMR4X_ADC : std_logic_vector(23 downto 0);
110 signal AMR4Y_ADC : std_logic_vector(23 downto 0);
111 signal AMR4Z_ADC : std_logic_vector(23 downto 0);
112
113 signal AMR1X_R : std_logic_vector(23 downto 0);
114 signal AMR1Y_R : std_logic_vector(23 downto 0);
115 signal AMR1Z_R : std_logic_vector(23 downto 0);
116
117 signal AMR2X_R : std_logic_vector(23 downto 0);
118 signal AMR2Y_R : std_logic_vector(23 downto 0);
119 signal AMR2Z_R : std_logic_vector(23 downto 0);
120
121 signal AMR3X_R : std_logic_vector(23 downto 0);
122 signal AMR3Y_R : std_logic_vector(23 downto 0);
123 signal AMR3Z_R : std_logic_vector(23 downto 0);
124
125 signal AMR4X_R : std_logic_vector(23 downto 0);
126 signal AMR4Y_R : std_logic_vector(23 downto 0);
127 signal AMR4Z_R : std_logic_vector(23 downto 0);
128
129 signal AMR1X_S : std_logic_vector(23 downto 0);
130 signal AMR1Y_S : std_logic_vector(23 downto 0);
131 signal AMR1Z_S : std_logic_vector(23 downto 0);
132
133 signal AMR2X_S : std_logic_vector(23 downto 0);
134 signal AMR2Y_S : std_logic_vector(23 downto 0);
135 signal AMR2Z_S : std_logic_vector(23 downto 0);
136
137 signal AMR3X_S : std_logic_vector(23 downto 0);
138 signal AMR3Y_S : std_logic_vector(23 downto 0);
139 signal AMR3Z_S : std_logic_vector(23 downto 0);
140
141 signal AMR4X_S : std_logic_vector(23 downto 0);
142 signal AMR4Y_S : std_logic_vector(23 downto 0);
143 signal AMR4Z_s : std_logic_vector(23 downto 0);
144
145
146
147 signal Temp1 : std_logic_vector(23 downto 0);
148 signal Temp2 : std_logic_vector(23 downto 0);
149 signal Temp3 : std_logic_vector(23 downto 0);
150 signal Temp4 : std_logic_vector(23 downto 0);
151
152
153 signal LF1 : std_logic_vector(15 downto 0);
154 signal LF2 : std_logic_vector(15 downto 0);
155 signal LF3 : std_logic_vector(15 downto 0);
156
157
158 signal LF1_int : std_logic_vector(23 downto 0);
159 signal LF2_int : std_logic_vector(23 downto 0);
160 signal LF3_int : std_logic_vector(23 downto 0);
161
162 signal DC_ADC_SmplClk : std_logic;
163 signal LF_ADC_SmplClk : std_logic;
164 signal SET_RESET0_sig : std_logic;
165 signal SET_RESET1_sig : std_logic;
166 signal SET_RESET_counter : integer range 0 to 31:=0;
167
168 signal MinFCnt : integer range 0 to MinFCount-1;
169
170 signal FramePlacerFlags : std_logic_vector(FramePlacerCount-1 downto 0);
171
172 begin
173
174
175 clk_buf <= clk;
176 reset_buf <= reset;
177 --
178
179 Gate_Inv <= not Gate;
180 sclk_Inv <= not Sclk;
181 MinF_Inv <= not MinF;
182
183 LED <= not data_int;
184 data <= data_int;
185
186
187
188 SD0 : Serial_Driver
189 generic map(WordSize)
190 port map(sclk_Inv,MuxOUT,Gate_inv,data_int);
191
192 WC0 : Word_Cntr
193 generic map(WordSize,WordCnt)
194 port map(sclk_Inv,MinF,WordClk,WordCount);
195
196 MFC0 : MinF_Cntr
197 generic map(MinFCount)
198 port map(
199 clk => MinF_Inv,
200 reset => MajF,
201 Cnt_out => MinFCnt
202 );
203
204
205 MUX0 : Serial_Driver_Multiplexor
206 generic map(FramePlacerCount,WordSize)
207 port map(sclk_Inv,Sel,MuxIN,MuxOUT);
208
209
210 DCFP0 : entity work.DC_FRAME_PLACER
211 generic map(WordSize,WordCnt,MinFCount)
212 port map(
213 clk => Sclk,
214 Wcount => WordCount,
215 MinFCnt => MinFCnt,
216 Flag => FramePlacerFlags(0),
217 AMR1X => AMR1X,
218 AMR1Y => AMR1Y,
219 AMR1Z => AMR1Z,
220 AMR2X => AMR2X,
221 AMR2Y => AMR2Y,
222 AMR2Z => AMR2Z,
223 AMR3X => AMR3X,
224 AMR3Y => AMR3Y,
225 AMR3Z => AMR3Z,
226 AMR4X => AMR4X,
227 AMR4Y => AMR4Y,
228 AMR4Z => AMR4Z,
229 Temp1 => Temp1,
230 Temp2 => Temp2,
231 Temp3 => Temp3,
232 Temp4 => Temp4,
233 WordOut => MuxIN(7 downto 0));
234
235
236
237 LFP0 : entity work.LF_FRAME_PLACER
238 generic map(WordSize,WordCnt,MinFCount)
239 port map(
240 clk => Sclk,
241 Wcount => WordCount,
242 Flag => FramePlacerFlags(1),
243 LF1 => LF1,
244 LF2 => LF2,
245 LF3 => LF3,
246 WordOut => MuxIN(15 downto 8));
247
248
249
250 DC_SMPL_CLK0 : entity work.LF_SMPL_CLK
251 generic map(36)
252 port map(
253 reset => reset,
254 wclk => WordClk,
255 SMPL_CLK => DC_ADC_SmplClk);
256
257 process(reset,DC_ADC_SmplClk)
258 begin
259 if reset = '0' then
260 SET_RESET0_sig <= '0';
261 elsif DC_ADC_SmplClk'event and DC_ADC_SmplClk = '0' then
262 if(SET_RESET_counter = 31) then
263 SET_RESET0_sig <= not SET_RESET0_sig;
264 SET_RESET_counter <= 0;
265 else
266 SET_RESET_counter <= SET_RESET_counter +1;
267 end if;
268 end if;
269 end process;
270
271 SET_RESET1_sig <= SET_RESET0_sig;
272 SET_RESET0 <= SET_RESET0_sig;
273 SET_RESET1 <= SET_RESET1_sig;
274 --
275
276
277
278 send_ADC_DATA : IF SEND_CONSTANT_DATA = 0 GENERATE
279 DC_ADC0 : DUAL_ADS1278_DRIVER --With AMR down ! => 24bits DC TM -> SC high res on Spin
280 port map(
281 Clk => clk_buf,
282 reset => reset_buf,
283 SpiClk => DC_ADC_Sclk,
284 DIN => DC_ADC_IN,
285 SmplClk => DC_ADC_SmplClk,
286 OUT00 => AMR1X,
287 OUT01 => AMR1Y,
288 OUT02 => AMR1Z,
289 OUT03 => AMR2X,
290 OUT04 => AMR2Y,
291 OUT05 => AMR2Z,
292 OUT06 => Temp1,
293 OUT07 => Temp2,
294 OUT10 => AMR3X,
295 OUT11 => AMR3Y,
296 OUT12 => AMR3Z,
297 OUT13 => AMR4X,
298 OUT14 => AMR4Y,
299 OUT15 => AMR4Z,
300 OUT16 => Temp3,
301 OUT17 => Temp4,
302 FSynch => DC_ADC_FSynch
303 );
304 LF1 <= LF1cst;
305 LF2 <= LF2cst;
306 LF3 <= LF3cst;
307 END GENERATE;
308
309 send_CST_DATA : IF (SEND_CONSTANT_DATA = 1) and (SEND_MINF_VALUE = 0) GENERATE
310 AMR1X <= AMR1Xcst;
311 AMR1Y <= AMR1Ycst;
312 AMR1Z <= AMR1Zcst;
313 AMR2X <= AMR2Xcst;
314 AMR2Y <= AMR2Ycst;
315 AMR2Z <= AMR2Zcst;
316 Temp1 <= Temp1cst;
317 Temp2 <= Temp2cst;
318 AMR3X <= AMR3Xcst;
319 AMR3Y <= AMR3Ycst;
320 AMR3Z <= AMR3Zcst;
321 AMR4X <= AMR4Xcst;
322 AMR4Y <= AMR4Ycst;
323 AMR4Z <= AMR4Zcst;
324 Temp3 <= Temp3cst;
325 Temp4 <= Temp4cst;
326
327 LF1 <= LF1cst;
328 LF2 <= LF2cst;
329 LF3 <= LF3cst;
330 END GENERATE;
331
332
333
334
335 send_minF_valuelbl : IF (SEND_CONSTANT_DATA = 1) and (SEND_MINF_VALUE = 1) GENERATE
336 AMR1X <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
337 AMR1Y <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
338 AMR1Z <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
339 AMR2X <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
340 AMR2Y <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
341 AMR2Z <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
342 Temp1 <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
343 Temp2 <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
344 AMR3X <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
345 AMR3Y <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
346 AMR3Z <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
347 AMR4X <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
348 AMR4Y <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
349 AMR4Z <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
350 Temp3 <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
351 Temp4 <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
352
353 LF1 <= LF1cst;
354 LF2 <= LF2cst;
355 LF3 <= LF3cst;
356 END GENERATE;
357
358 LF_SMPL_CLK0 : entity work.LF_SMPL_CLK
359 port map(
360 reset => reset,
361 wclk => WordClk,
362 SMPL_CLK => LF_ADC_SmplClk
363 );
364
365
366 sr_hndl: IF SEND_CONSTANT_DATA = 0 GENERATE
367 process(clk)
368 begin
369 if clk'event and clk ='1' then
370 if SET_RESET0_sig = '1' then
371 AMR1X_S <= AMR1X_ADC;
372 AMR1Y_S <= AMR1Y_ADC;
373 AMR1Z_S <= AMR1Z_ADC;
374 AMR2X_S <= AMR2X_ADC;
375 AMR2Y_S <= AMR2Y_ADC;
376 AMR2Z_S <= AMR2Z_ADC;
377 AMR3X_S <= AMR3X_ADC;
378 AMR3Y_S <= AMR3Y_ADC;
379 AMR3Z_S <= AMR3Z_ADC;
380 AMR4X_S <= AMR4X_ADC;
381 AMR4Y_S <= AMR4Y_ADC;
382 AMR4Z_S <= AMR4Z_ADC;
383 else
384 AMR1X_R <= AMR1X_ADC;
385 AMR1Y_R <= AMR1Y_ADC;
386 AMR1Z_R <= AMR1Z_ADC;
387 AMR2X_R <= AMR2X_ADC;
388 AMR2Y_R <= AMR2Y_ADC;
389 AMR2Z_R <= AMR2Z_ADC;
390 AMR3X_R <= AMR3X_ADC;
391 AMR3Y_R <= AMR3Y_ADC;
392 AMR3Z_R <= AMR3Z_ADC;
393 AMR4X_R <= AMR4X_ADC;
394 AMR4Y_R <= AMR4Y_ADC;
395 AMR4Z_R <= AMR4Z_ADC;
396 end if;
397 -- AMR1X <= std_logic_vector((signed(AMR1X_S) - signed(AMR1X_R))/2);
398 -- AMR1Y <= std_logic_vector((signed(AMR1Y_S) - signed(AMR1Y_R))/2);
399 -- AMR1Z <= std_logic_vector((signed(AMR1Z_S) - signed(AMR1Z_R))/2);
400 -- AMR2X <= std_logic_vector((signed(AMR2X_S) - signed(AMR2X_R))/2);
401 -- AMR2Y <= std_logic_vector((signed(AMR2Y_S) - signed(AMR2Y_R))/2);
402 -- AMR2Z <= std_logic_vector((signed(AMR2Z_S) - signed(AMR2Z_R))/2);
403 -- AMR3X <= std_logic_vector((signed(AMR3X_S) - signed(AMR3X_R))/2);
404 -- AMR3Y <= std_logic_vector((signed(AMR3Y_S) - signed(AMR3Y_R))/2);
405 -- AMR3Z <= std_logic_vector((signed(AMR3Z_S) - signed(AMR3Z_R))/2);
406 -- AMR4X <= std_logic_vector((signed(AMR4X_S) - signed(AMR4X_R))/2);
407 -- AMR4Y <= std_logic_vector((signed(AMR4Y_S) - signed(AMR4Y_R))/2);
408 -- AMR4Z <= std_logic_vector((signed(AMR4Z_S) - signed(AMR4Z_R))/2);
409 -- AMR1X <= AMR1X_S;
410 -- AMR1Y <= AMR1Y_S;
411 -- AMR1Z <= AMR1Z_S;
412 -- AMR2X <= AMR2X_S;
413 -- AMR2Y <= AMR2Y_S;
414 -- AMR2Z <= AMR2Z_S;
415 -- AMR3X <= AMR3X_S;
416 -- AMR3Y <= AMR3Y_S;
417 -- AMR3Z <= AMR3Z_S;
418 -- AMR4X <= AMR4X_S;
419 -- AMR4Y <= AMR4Y_S;
420 -- AMR4Z <= AMR4Z_S;
421 end if;
422 end process;
423 end generate;
424
425
426 process(clk)
427 variable SelVar : integer range 0 to 1;
428 begin
429 if clk'event and clk ='1' then
430 Decoder: FOR i IN 0 to FramePlacerCount-1 loop
431 if FramePlacerFlags(i) = '1' then
432 SelVar := i;
433 end if;
434 END loop Decoder;
435 Sel <= SelVar;
436 end if;
437 end process;
438
439
440 end rtl;
441
442
443
Show file before | Show file after | Hide comments
@@ -0,0 +1,143
1 library IEEE;
2 use IEEE.STD_LOGIC_1164.ALL;
3 library lpp;
4 use lpp.lpp_ad_conv.all;
5 use lpp.lpp_amba.all;
6 use lpp.apb_devices_list.all;
7 use lpp.general_purpose.all;
8 use lpp.Rocket_PCM_Encoder.all;
9 use lpp.iir_filter.all;
10 use work.config.all;
11
12
13 entity IIR_FILTER_TOP is
14 generic
15 (
16 V2 : integer :=0 -- IF 1 uses V2 else use V1
17 );
18 port
19 (
20 rstn : IN STD_LOGIC;
21 clk : IN STD_LOGIC;
22
23 SMPclk : IN STD_LOGIC;
24 LF1_IN : IN std_logic_vector(15 downto 0);
25 LF2_IN : IN std_logic_vector(15 downto 0);
26 LF3_IN : IN std_logic_vector(15 downto 0);
27
28 SMPCLKOut : OUT STD_LOGIC;
29 LF1_OUT : OUT std_logic_vector(15 downto 0);
30 LF2_OUT : OUT std_logic_vector(15 downto 0);
31 LF3_OUT : OUT std_logic_vector(15 downto 0)
32 );
33 end IIR_FILTER_TOP;
34
35 architecture AR_IIR_FILTER_TOP of IIR_FILTER_TOP is
36 signal sps : Samples(2 DOWNTO 0);
37
38 signal LFX : Samples(2 DOWNTO 0);
39 signal Filter_sp_in : samplT(2 DOWNTO 0, 15 DOWNTO 0);
40 signal Filter_sp_out : samplT(2 DOWNTO 0, 15 DOWNTO 0);
41 signal sample_out_val : std_logic;
42 signal LF_ADC_SpPulse : std_logic;
43
44 begin
45
46 sps(0) <= LF1_IN;
47 sps(1) <= LF2_IN;
48 sps(2) <= LF3_IN;
49
50 LF1_OUT <= LFX(0);
51 LF2_OUT <= LFX(1);
52 LF3_OUT <= LFX(2);
53
54 SMPCLKOut <= sample_out_val;
55
56 loop_all_sample : FOR J IN 15 DOWNTO 0 GENERATE
57
58 loop_all_chanel : FOR I IN 2 DOWNTO 0 GENERATE
59 process(rstn,clk)
60 begin
61 if rstn ='0' then
62 Filter_sp_in(I,J) <= '0';
63 -- LFX(I) <= (others => '0');
64 elsif clk'event and clk ='1' then
65 if sample_out_val = '1' then
66 LFX(I)(J) <= Filter_sp_out(I,J);
67 Filter_sp_in(I,J) <= sps(I)(J);
68 end if;
69 end if;
70 end process;
71 END GENERATE;
72 END GENERATE;
73
74 V2FILTER: IF V2 = 1 GENERATE
75
76 smpPulse: entity work.OneShot
77 Port map(
78 reset => rstn,
79 clk => clk,
80 input => SMPclk,
81 output => LF_ADC_SpPulse
82 );
83
84 FilterV2: IIR_CEL_CTRLR_v2
85 GENERIC map(
86 tech => CFG_MEMTECH,
87 Mem_use => use_RAM,
88 Sample_SZ => Sample_SZ,
89 Coef_SZ => Coef_SZ,
90 Coef_Nb => 25,
91 Coef_sel_SZ => 5,
92 Cels_count => 5,
93 ChanelsCount => ChanelsCount
94 )
95 PORT map(
96 rstn => rstn,
97 clk => clk,
98
99 virg_pos => virgPos,
100 coefs => CoefsInitValCst_v2,
101
102 sample_in_val => LF_ADC_SpPulse,
103 sample_in => Filter_sp_in,
104
105 sample_out_val => sample_out_val,
106 sample_out => Filter_sp_out
107 );
108
109
110
111 END GENERATE;
112
113 V1FILTER: IF V2 /= 1 GENERATE
114
115 sample_out_val <= SMPclk;
116
117
118 FilterV1: IIR_CEL_CTRLR
119 generic map(
120 tech => CFG_MEMTECH,
121 Sample_SZ => Sample_SZ,
122 ChanelsCount => 3,
123 Coef_SZ => Coef_SZ,
124 CoefCntPerCel=> CoefCntPerCel,
125 Cels_count => Cels_count,
126 Mem_use => use_RAM
127 )
128 port map(
129 reset => rstn,
130 clk => clk,
131 sample_clk => SMPclk,
132 sample_in => Filter_sp_in,
133 sample_out => Filter_sp_out,
134 virg_pos => virgPos,
135 GOtest => open,
136 coefs => CoefsInitValCst
137 );
138
139 END GENERATE;
140
141
142 end AR_IIR_FILTER_TOP;
143
Show file before | Show file after | Hide comments
@@ -0,0 +1,215
1 library IEEE;
2 use IEEE.STD_LOGIC_1164.ALL;
3 library lpp;
4 use lpp.lpp_ad_conv.all;
5 use lpp.lpp_amba.all;
6 use lpp.apb_devices_list.all;
7 use lpp.general_purpose.all;
8 use lpp.Rocket_PCM_Encoder.all;
9 use lpp.iir_filter.all;
10 use work.config.all;
11
12 entity LF_ACQ_TOP is
13 generic(
14 WordSize : integer := 8;
15 WordCnt : integer := 144;
16 MinFCount : integer := 64;
17 CstDATA : integer := 0;
18 IIRFilter : integer := 0
19 );
20 port(
21
22 reset : in std_logic;
23 clk : in std_logic;
24 SyncSig : in STD_LOGIC;
25 minorF : in std_logic;
26 majorF : in std_logic;
27 sclk : in std_logic;
28 WordClk : in std_logic;
29 LF_SCK : out std_logic;
30 LF_CNV : out std_logic;
31 LF_SDO1 : in std_logic;
32 LF_SDO2 : in std_logic;
33 LF_SDO3 : in std_logic;
34 LF1 : out std_logic_vector(15 downto 0);
35 LF2 : out std_logic_vector(15 downto 0);
36 LF3 : out std_logic_vector(15 downto 0)
37 );
38 end LF_ACQ_TOP;
39
40 architecture AR_LF_ACQ_TOP of LF_ACQ_TOP is
41
42 signal LF_ADC_SmplClk : std_logic;
43
44 signal LF_ADC_SpPulse : std_logic;
45 signal SDO : STD_LOGIC_VECTOR(2 DOWNTO 0);
46 signal sps : Samples(2 DOWNTO 0);
47
48 signal LFX : Samples(2 DOWNTO 0);
49 signal sample_val : std_logic;
50 signal AD_in : AD7688_in(2 DOWNTO 0);
51 signal AD_out : AD7688_out;
52 signal Filter_sp_in : samplT(2 DOWNTO 0, 15 DOWNTO 0);
53 signal Filter_sp_out : samplT(2 DOWNTO 0, 15 DOWNTO 0);
54 signal sample_out_val : std_logic;
55
56 signal LF1_sync : std_logic_vector(15 downto 0);
57 signal LF2_sync : std_logic_vector(15 downto 0);
58 signal LF3_sync : std_logic_vector(15 downto 0);
59
60 begin
61
62
63 AD_in(0).sdi <= LF_SDO1;
64 AD_in(1).sdi <= LF_SDO2;
65 AD_in(2).sdi <= LF_SDO3;
66 LF_SCK <= AD_out.SCK;
67 LF_CNV <= AD_out.CNV;
68
69
70 LF_SMPL_CLK0 : entity work.LF_SMPL_CLK
71 generic map(6)
72 port map(
73 reset => reset,
74 wclk => WordClk,
75 SMPL_CLK => LF_ADC_SmplClk
76 );
77
78
79 ADC: IF CstDATA =0 GENERATE
80 ADCs: AD7688_drvr
81 GENERIC map
82 (
83 ChanelCount => 3,
84 clkkHz => 48000
85 )
86 PORT map
87 (
88 clk => clk,
89 rstn => reset,
90 enable => '1',
91 smplClk => LF_ADC_SmplClk,
92 DataReady => sample_val,
93 smpout => sps,
94 AD_in => AD_in,
95 AD_out => AD_out
96 );
97
98 smpPulse: entity work.OneShot
99 Port map(
100 reset => reset,
101 clk => clk,
102 input => LF_ADC_SmplClk,
103 output => LF_ADC_SpPulse
104 );
105
106
107
108
109 NOfilt: IF IIRFilter = 0 GENERATE
110 process(reset,clk)
111 begin
112 if reset ='0' then
113 LF1_sync <= (others => '0');
114 LF2_sync <= (others => '0');
115 LF3_sync <= (others => '0');
116 elsif clk'event and clk ='1' then
117 if sample_val = '1' then
118 LF1_sync <= sps(0);
119 LF2_sync <= sps(1);
120 LF3_sync <= sps(2);
121 end if;
122 end if;
123 end process;
124 END GENERATE;
125
126
127 filt: IF IIRFilter /= 0 GENERATE
128
129
130 filtertop: entity work.IIR_FILTER_TOP
131 generic map
132 (
133 V2 => 0
134 )
135 port map
136 (
137 rstn => reset,
138 clk => clk,
139
140 SMPclk => LF_ADC_SmplClk,
141 LF1_IN => sps(0),
142 LF2_IN => sps(1),
143 LF3_IN => sps(2),
144
145 SMPCLKOut => open,
146 LF1_OUT => LF1_sync,
147 LF2_OUT => LF2_sync,
148 LF3_OUT => LF3_sync
149 );
150
151 END GENERATE;
152
153
154
155
156 END GENERATE;
157
158 CST: IF CstDATA /=0 GENERATE
159
160 LF1_sync <= LF1cst;
161 LF2_sync <= LF2cst;
162 LF3_sync <= LF3cst;
163
164 END GENERATE;
165
166
167
168 LF1sync: entity work.Fast2SlowSync
169 generic map(N => 16)
170 port map( LF1_sync,clk,sclk,SyncSig,LF1);
171
172 LF2sync: entity work.Fast2SlowSync
173 generic map(N => 16)
174 port map( LF2_sync,clk,sclk,SyncSig,LF2);
175
176 LF3sync: entity work.Fast2SlowSync
177 generic map(N => 16)
178 port map( LF3_sync,clk,sclk,SyncSig,LF3);
179
180 --Filter: IIR_CEL_FILTER
181 -- GENERIC map(
182 -- tech => CFG_MEMTECH,
183 -- Sample_SZ => Sample_SZ,
184 -- ChanelsCount => ChanelsCount,
185 -- Coef_SZ => Coef_SZ,
186 -- CoefCntPerCel => CoefCntPerCel,
187 -- Cels_count => Cels_count,
188 -- Mem_use => use_RAM
189 -- )
190 -- PORT map(
191 -- reset => reset,
192 -- clk => clk,
193 -- sample_clk => LF_ADC_SmplClk,
194 -- regs_in : IN in_IIR_CEL_reg;
195 -- regs_out : IN out_IIR_CEL_reg;
196 -- sample_in : IN samplT(ChanelsCount-1 DOWNTO 0, Sample_SZ-1 DOWNTO 0);
197 -- sample_out : OUT samplT(ChanelsCount-1 DOWNTO 0, Sample_SZ-1 DOWNTO 0);
198 -- GOtest : OUT STD_LOGIC;
199 -- coefs : IN STD_LOGIC_VECTOR(Coef_SZ*CoefCntPerCel*Cels_count-1 DOWNTO 0)
200 --
201 -- );
202
203
204
205
206 end AR_LF_ACQ_TOP;
207
208
209
210
211
212
213
214
215
Show file before | Show file after | Hide comments
@@ -0,0 +1,67
1 ----------------------------------------------------------------------------------
2 -- Company:
3 -- Engineer:
4 --
5 -- Create Date: 21:06:46 08/22/2013
6 -- Design Name:
7 -- Module Name: OneShot - AR_OneShot
8 -- Project Name:
9 -- Target Devices:
10 -- Tool versions:
11 -- Description:
12 --
13 -- Dependencies:
14 --
15 -- Revision:
16 -- Revision 0.01 - File Created
17 -- Additional Comments:
18 --
19 ----------------------------------------------------------------------------------
20 library IEEE;
21 use IEEE.STD_LOGIC_1164.ALL;
22
23 -- Uncomment the following library declaration if using
24 -- arithmetic functions with Signed or Unsigned values
25 --use IEEE.NUMERIC_STD.ALL;
26
27 -- Uncomment the following library declaration if instantiating
28 -- any Xilinx primitives in this code.
29 --library UNISIM;
30 --use UNISIM.VComponents.all;
31
32 entity OneShot is
33 Port ( reset : in STD_LOGIC;
34 clk : in STD_LOGIC;
35 input : in STD_LOGIC;
36 output : out STD_LOGIC);
37 end OneShot;
38
39 architecture AR_OneShot of OneShot is
40 signal inreg : std_logic;
41 begin
42
43 process(clk,reset)
44 begin
45 if reset = '0' then
46 output <= '0';
47 elsif clk'event and clk = '1' then
48 inreg <= input;
49 if inreg = '0' and input = '1' then
50 output <= '1';
51 else
52 output <= '0';
53 end if;
54 end if;
55 end process;
56
57 end AR_OneShot;
58
59
60
61
62
63
64
65
66
67
Show file before | Show file after | Hide comments
@@ -0,0 +1,91
1 ------------------------------------------------------------------------------
2 -- This file is a part of the LPP VHDL IP LIBRARY
3 -- Copyright (C) 2009 - 2013, Laboratory of Plasmas Physic - CNRS
4 --
5 -- This program is free software; you can redistribute it and/or modify
6 -- it under the terms of the GNU General Public License as published by
7 -- the Free Software Foundation; either version 3 of the License, or
8 -- (at your option) any later version.
9 --
10 -- This program is distributed in the hope that it will be useful,
11 -- but WITHOUT ANY WARRANTY; without even the implied warranty of
12 -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 -- GNU General Public License for more details.
14 --
15 -- You should have received a copy of the GNU General Public License
16 -- along with this program; if not, write to the Free Software
17 -- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 ------------------------------------------------------------------------------
19 -- Author : Alexis Jeandet
20 -- Mail : alexis.jeandet@member.fsf.org
21 ------------------------------------------------------------------------------
22 --
23 -- This module implements the Slow to Slow Fast transfer:
24 -- Data Transfer between Asynchronous Clock Domains without Pain
25 -- from Markus Schutti, Markus Pfaff, Richard Hagelauer
26 -- http://www-micrel.deis.unibo.it/~benini/files/SNUG/paper9_final.pdf
27 -- see page 5
28 --
29 --
30
31 library IEEE;
32 use IEEE.STD_LOGIC_1164.ALL;
33
34 entity Slow2FastSync is
35 generic
36 (
37 N : integer range 0 to 256:=8
38 );
39 Port
40 (
41 Data : in STD_LOGIC_VECTOR (N-1 downto 0);
42 ClockF : in STD_LOGIC;
43 ClockS : in STD_LOGIC;
44 SyncSignal : in STD_LOGIC;
45 DataSinkS : out STD_LOGIC_VECTOR (N-1 downto 0)
46 );
47 end Slow2FastSync;
48
49 architecture AR_Slow2FastSync of Slow2FastSync is
50
51 signal DataS : STD_LOGIC_VECTOR (N-1 downto 0);
52
53
54 begin
55
56
57
58 process(ClockF)
59 begin
60 if ClockF'event and ClockF = '1' and SyncSignal = '1' then
61 DataSinkS <= DataS;
62 end if;
63 end process;
64
65 process(ClockS)
66 begin
67 if ClockS'event and ClockS = '1' then
68 DataS <= Data;
69 end if;
70 end process;
71
72 end AR_Slow2FastSync;
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
Show file before | Show file after | Hide comments
@@ -0,0 +1,177
1 ----------------------------------------------------------------------------------
2 -- Company:
3 -- Engineer:
4 --
5 -- Create Date: 10:03:54 08/21/2013
6 -- Design Name:
7 -- Module Name: TM_MODULE - AR_TM_MODULE
8 -- Project Name:
9 -- Target Devices:
10 -- Tool versions:
11 -- Description:
12 --
13 -- Dependencies:
14 --
15 -- Revision:
16 -- Revision 0.01 - File Created
17 -- Additional Comments:
18 --
19 ----------------------------------------------------------------------------------
20 library IEEE;
21 use IEEE.STD_LOGIC_1164.ALL;
22 library lpp;
23 use lpp.lpp_ad_conv.all;
24 use lpp.lpp_amba.all;
25 use lpp.apb_devices_list.all;
26 use lpp.general_purpose.all;
27 use lpp.Rocket_PCM_Encoder.all;
28
29 entity TM_MODULE is
30 generic(
31 WordSize : integer := 8; WordCnt : integer := 144;MinFCount : integer := 64
32 );
33 port(
34
35 reset : in std_logic;
36 clk : in std_logic;
37 MinF : in std_logic;
38 MajF : in std_logic;
39 sclk : in std_logic;
40 gate : in std_logic;
41 data : out std_logic;
42 WordClk : out std_logic;
43
44
45 LF1 : in std_logic_vector(15 downto 0);
46 LF2 : in std_logic_vector(15 downto 0);
47 LF3 : in std_logic_vector(15 downto 0);
48
49 AMR1X : in std_logic_vector(23 downto 0);
50 AMR1Y : in std_logic_vector(23 downto 0);
51 AMR1Z : in std_logic_vector(23 downto 0);
52
53 AMR2X : in std_logic_vector(23 downto 0);
54 AMR2Y : in std_logic_vector(23 downto 0);
55 AMR2Z : in std_logic_vector(23 downto 0);
56
57 AMR3X : in std_logic_vector(23 downto 0);
58 AMR3Y : in std_logic_vector(23 downto 0);
59 AMR3Z : in std_logic_vector(23 downto 0);
60
61 AMR4X : in std_logic_vector(23 downto 0);
62 AMR4Y : in std_logic_vector(23 downto 0);
63 AMR4Z : in std_logic_vector(23 downto 0);
64
65 Temp1 : in std_logic_vector(23 downto 0);
66 Temp2 : in std_logic_vector(23 downto 0);
67 Temp3 : in std_logic_vector(23 downto 0);
68 Temp4 : in std_logic_vector(23 downto 0)
69 );
70 end TM_MODULE;
71
72 architecture AR_TM_MODULE of TM_MODULE is
73
74 Constant FramePlacerCount : integer := 2;
75 signal MinFCnt : integer range 0 to MinFCount-1;
76 signal FramePlacerFlags : std_logic_vector(FramePlacerCount-1 downto 0);
77
78 signal WordCount : integer range 0 to WordCnt-1;
79
80 signal data_int : std_logic;
81
82 signal MuxOUT : std_logic_vector(WordSize-1 downto 0);
83 signal MuxIN : std_logic_vector((2*WordSize)-1 downto 0);
84 signal Sel : integer range 0 to 1;
85
86
87 signal MinF_Inv : std_logic;
88 signal Gate_Inv : std_logic;
89 signal sclk_Inv : std_logic;
90
91 begin
92
93
94 Gate_Inv <= not Gate;
95 sclk_Inv <= not Sclk;
96 MinF_Inv <= not MinF;
97 data <= data_int;
98
99 SD0 : Serial_Driver
100 generic map(WordSize)
101 port map(sclk_Inv,MuxOUT,Gate_inv,data_int);
102
103 WC0 : Word_Cntr
104 generic map(WordSize,WordCnt)
105 port map(sclk_Inv,MinF,WordClk,WordCount);
106
107 MFC0 : MinF_Cntr
108 generic map(MinFCount)
109 port map(
110 clk => MinF_Inv,
111 reset => MajF,
112 Cnt_out => MinFCnt
113 );
114
115
116 MUX0 : Serial_Driver_Multiplexor
117 generic map(FramePlacerCount,WordSize)
118 port map(sclk_Inv,Sel,MuxIN,MuxOUT);
119
120
121 DCFP0 : entity work.DC_FRAME_PLACER
122 generic map(WordSize,WordCnt,MinFCount)
123 port map(
124 clk => Sclk,
125 Wcount => WordCount,
126 MinFCnt => MinFCnt,
127 Flag => FramePlacerFlags(0),
128 AMR1X => AMR1X,
129 AMR1Y => AMR1Y,
130 AMR1Z => AMR1Z,
131 AMR2X => AMR2X,
132 AMR2Y => AMR2Y,
133 AMR2Z => AMR2Z,
134 AMR3X => AMR3X,
135 AMR3Y => AMR3Y,
136 AMR3Z => AMR3Z,
137 AMR4X => AMR4X,
138 AMR4Y => AMR4Y,
139 AMR4Z => AMR4Z,
140 Temp1 => Temp1,
141 Temp2 => Temp2,
142 Temp3 => Temp3,
143 Temp4 => Temp4,
144 WordOut => MuxIN(7 downto 0));
145
146
147
148 LFP0 : entity work.LF_FRAME_PLACER
149 generic map(WordSize,WordCnt,MinFCount)
150 port map(
151 clk => Sclk,
152 Wcount => WordCount,
153 Flag => FramePlacerFlags(1),
154 LF1 => LF1,
155 LF2 => LF2,
156 LF3 => LF3,
157 WordOut => MuxIN(15 downto 8));
158
159
160
161 process(clk)
162 variable SelVar : integer range 0 to 1;
163 begin
164 if clk'event and clk ='1' then
165 Decoder: FOR i IN 0 to FramePlacerCount-1 loop
166 if FramePlacerFlags(i) = '1' then
167 SelVar := i;
168 end if;
169 END loop Decoder;
170 Sel <= SelVar;
171 end if;
172 end process;
173
174
175
176 end AR_TM_MODULE;
177
Show file before | Show file after | Hide comments
@@ -0,0 +1,65
1 ------------------------------------------------------------------------------
2 -- This file is a part of the LPP VHDL IP LIBRARY
3 -- Copyright (C) 2009 - 2010, Laboratory of Plasmas Physic - CNRS
4 --
5 -- This program is free software; you can redistribute it and/or modify
6 -- it under the terms of the GNU General Public License as published by
7 -- the Free Software Foundation; either version 3 of the License, or
8 -- (at your option) any later version.
9 --
10 -- This program is distributed in the hope that it will be useful,
11 -- but WITHOUT ANY WARRANTY; without even the implied warranty of
12 -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 -- GNU General Public License for more details.
14 --
15 -- You should have received a copy of the GNU General Public License
16 -- along with this program; if not, write to the Free Software
17 -- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 -------------------------------------------------------------------------------
19 -- Author : Alexis Jeandet
20 -- Mail : alexis.jeandet@lpp.polytechnique.fr
21 ----------------------------------------------------------------------------
22 LIBRARY IEEE;
23 USE IEEE.numeric_std.ALL;
24 USE IEEE.std_logic_1164.ALL;
25 LIBRARY lpp;
26 USE lpp.general_purpose.ALL;
27 --IDLE = 0000
28 --MAC = 0001
29 --MULT = 0010 and set MULT in ADD reg
30 --ADD = 0011
31 --CLRMAC = 0100
32
33
34 ENTITY ALU_V0 IS
35 GENERIC(
36 Arith_en : INTEGER := 1;
37 Logic_en : INTEGER := 1;
38 Input_SZ_1 : INTEGER := 16;
39 Input_SZ_2 : INTEGER := 9
40
41 );
42 PORT(
43 clk : IN STD_LOGIC;
44 reset : IN STD_LOGIC;
45 ctrl : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
46 OP1 : IN STD_LOGIC_VECTOR(Input_SZ_1-1 DOWNTO 0);
47 OP2 : IN STD_LOGIC_VECTOR(Input_SZ_2-1 DOWNTO 0);
48 RES : OUT STD_LOGIC_VECTOR(Input_SZ_1+Input_SZ_2-1 DOWNTO 0)
49 );
50 END ENTITY;
51
52 ARCHITECTURE ar_ALU OF ALU_V0 IS
53
54 SIGNAL clr_MAC : STD_LOGIC := '1';
55
56 BEGIN
57 clr_MAC <= '1' WHEN ctrl = "0100" OR ctrl = "0101" OR ctrl = "0110" ELSE '0';
58
59 arith : IF Arith_en = 1 GENERATE
60 MACinst : MAC_V0
61 GENERIC MAP(Input_SZ_1, Input_SZ_2)
62 PORT MAP(clk, reset, clr_MAC, ctrl(1 DOWNTO 0), OP1, OP2, RES);
63 END GENERATE;
64
65 END ARCHITECTURE;
Show file before | Show file after | Hide comments
@@ -0,0 +1,72
1 ------------------------------------------------------------------------------
2 -- This file is a part of the LPP VHDL IP LIBRARY
3 -- Copyright (C) 2009 - 2010, Laboratory of Plasmas Physic - CNRS
4 --
5 -- This program is free software; you can redistribute it and/or modify
6 -- it under the terms of the GNU General Public License as published by
7 -- the Free Software Foundation; either version 3 of the License, or
8 -- (at your option) any later version.
9 --
10 -- This program is distributed in the hope that it will be useful,
11 -- but WITHOUT ANY WARRANTY; without even the implied warranty of
12 -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 -- GNU General Public License for more details.
14 --
15 -- You should have received a copy of the GNU General Public License
16 -- along with this program; if not, write to the Free Software
17 -- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 -------------------------------------------------------------------------------
19 -- Author : Alexis Jeandet
20 -- Mail : alexis.jeandet@lpp.polytechnique.fr
21 ----------------------------------------------------------------------------
22 library IEEE;
23 use IEEE.numeric_std.all;
24 use IEEE.std_logic_1164.all;
25 library lpp;
26 use lpp.general_purpose.all;
27
28
29
30 entity Adder_V0 is
31 generic(
32 Input_SZ_A : integer := 16;
33 Input_SZ_B : integer := 16
34
35 );
36 port(
37 clk : in std_logic;
38 reset : in std_logic;
39 clr : in std_logic;
40 add : in std_logic;
41 OP1 : in std_logic_vector(Input_SZ_A-1 downto 0);
42 OP2 : in std_logic_vector(Input_SZ_B-1 downto 0);
43 RES : out std_logic_vector(Input_SZ_A-1 downto 0)
44 );
45 end entity;
46
47
48
49
50 architecture ar_Adder of Adder_V0 is
51
52 signal REG : std_logic_vector(Input_SZ_A-1 downto 0);
53 signal RESADD : std_logic_vector(Input_SZ_A-1 downto 0);
54
55 begin
56
57 RES <= REG;
58 RESADD <= std_logic_vector(resize(signed(OP1)+signed(OP2),Input_SZ_A));
59
60 process(clk,reset)
61 begin
62 if reset = '0' then
63 REG <= (others => '0');
64 elsif clk'event and clk ='1' then
65 if clr = '1' then
66 REG <= (others => '0');
67 elsif add = '1' then
68 REG <= RESADD;
69 end if;
70 end if;
71 end process;
72 end ar_Adder;
Show file before | Show file after | Hide comments
@@ -0,0 +1,262
1 ------------------------------------------------------------------------------
2 -- This file is a part of the LPP VHDL IP LIBRARY
3 -- Copyright (C) 2009 - 2010, Laboratory of Plasmas Physic - CNRS
4 --
5 -- This program is free software; you can redistribute it and/or modify
6 library IEEE;
7 use IEEE.numeric_std.all;
8 use IEEE.std_logic_1164.all;
9 library lpp;
10 use lpp.general_purpose.all;
11 --TODO
12 --terminer le testbensh puis changer le resize dans les instanciations
13 --par un resize sur un vecteur en combi
14
15
16
17
18
19 entity MAC_V0 is
20 generic(
21 Input_SZ_A : integer := 8;
22 Input_SZ_B : integer := 8
23
24 );
25 port(
26 clk : in std_logic;
27 reset : in std_logic;
28 clr_MAC : in std_logic;
29 MAC_MUL_ADD : in std_logic_vector(1 downto 0);
30 OP1 : in std_logic_vector(Input_SZ_A-1 downto 0);
31 OP2 : in std_logic_vector(Input_SZ_B-1 downto 0);
32 RES : out std_logic_vector(Input_SZ_A+Input_SZ_B-1 downto 0)
33 );
34 end MAC_V0;
35
36
37
38
39 architecture ar_MAC of MAC_V0 is
40
41
42
43
44
45 signal add,mult : std_logic;
46 signal MULTout : std_logic_vector(Input_SZ_A+Input_SZ_B-1 downto 0);
47
48 signal ADDERinA : std_logic_vector(Input_SZ_A+Input_SZ_B-1 downto 0);
49 signal ADDERinB : std_logic_vector(Input_SZ_A+Input_SZ_B-1 downto 0);
50 signal ADDERout : std_logic_vector(Input_SZ_A+Input_SZ_B-1 downto 0);
51
52
53 signal MACMUXsel : std_logic;
54 signal OP1_D_Resz : std_logic_vector(Input_SZ_A+Input_SZ_B-1 downto 0);
55 signal OP2_D_Resz : std_logic_vector(Input_SZ_A+Input_SZ_B-1 downto 0);
56
57
58
59 signal MACMUX2sel : std_logic;
60
61 signal add_D : std_logic;
62 signal OP1_D : std_logic_vector(Input_SZ_A-1 downto 0);
63 signal OP2_D : std_logic_vector(Input_SZ_B-1 downto 0);
64 signal MULTout_D : std_logic_vector(Input_SZ_A+Input_SZ_B-1 downto 0);
65 signal MACMUXsel_D : std_logic;
66 signal MACMUX2sel_D : std_logic;
67 signal MACMUX2sel_D_D : std_logic;
68 signal clr_MAC_D : std_logic;
69 signal clr_MAC_D_D : std_logic;
70
71
72
73
74
75 begin
76
77
78
79
80 --==============================================================
81 --=============M A C C O N T R O L E R=========================
82 --==============================================================
83 MAC_CONTROLER1 : MAC_CONTROLER
84 port map(
85 ctrl => MAC_MUL_ADD,
86 MULT => mult,
87 ADD => add,
88 MACMUX_sel => MACMUXsel,
89 MACMUX2_sel => MACMUX2sel
90
91 );
92 --==============================================================
93
94
95
96
97 --==============================================================
98 --=============M U L T I P L I E R==============================
99 --==============================================================
100 Multiplieri_nst : Multiplier
101 generic map(
102 Input_SZ_A => Input_SZ_A,
103 Input_SZ_B => Input_SZ_B
104 )
105 port map(
106 clk => clk,
107 reset => reset,
108 mult => mult,
109 OP1 => OP1,
110 OP2 => OP2,
111 RES => MULTout
112 );
113
114 --==============================================================
115
116
117
118
119 --==============================================================
120 --======================A D D E R ==============================
121 --==============================================================
122 adder_inst : Adder_V0
123 generic map(
124 Input_SZ_A => Input_SZ_A+Input_SZ_B,
125 Input_SZ_B => Input_SZ_A+Input_SZ_B
126 )
127 port map(
128 clk => clk,
129 reset => reset,
130 clr => clr_MAC_D,
131 add => add_D,
132 OP1 => ADDERinA,
133 OP2 => ADDERinB,
134 RES => ADDERout
135 );
136
137 --==============================================================
138
139
140 clr_MACREG1 : MAC_REG
141 generic map(size => 1)
142 port map(
143 reset => reset,
144 clk => clk,
145 D(0) => clr_MAC,
146 Q(0) => clr_MAC_D
147 );
148
149 clr_MACREG2 : MAC_REG
150 generic map(size => 1)
151 port map(
152 reset => reset,
153 clk => clk,
154 D(0) => clr_MAC_D,
155 Q(0) => clr_MAC_D_D
156 );
157
158 addREG : MAC_REG
159 generic map(size => 1)
160 port map(
161 reset => reset,
162 clk => clk,
163 D(0) => add,
164 Q(0) => add_D
165 );
166
167 OP1REG : MAC_REG
168 generic map(size => Input_SZ_A)
169 port map(
170 reset => reset,
171 clk => clk,
172 D => OP1,
173 Q => OP1_D
174 );
175
176
177 OP2REG : MAC_REG
178 generic map(size => Input_SZ_B)
179 port map(
180 reset => reset,
181 clk => clk,
182 D => OP2,
183 Q => OP2_D
184 );
185
186
187 MULToutREG : MAC_REG
188 generic map(size => Input_SZ_A+Input_SZ_B)
189 port map(
190 reset => reset,
191 clk => clk,
192 D => MULTout,
193 Q => MULTout_D
194 );
195
196
197 MACMUXselREG : MAC_REG
198 generic map(size => 1)
199 port map(
200 reset => reset,
201 clk => clk,
202 D(0) => MACMUXsel,
203 Q(0) => MACMUXsel_D
204 );
205
206 MACMUX2selREG : MAC_REG
207 generic map(size => 1)
208 port map(
209 reset => reset,
210 clk => clk,
211 D(0) => MACMUX2sel,
212 Q(0) => MACMUX2sel_D
213 );
214
215 MACMUX2selREG2 : MAC_REG
216 generic map(size => 1)
217 port map(
218 reset => reset,
219 clk => clk,
220 D(0) => MACMUX2sel_D,
221 Q(0) => MACMUX2sel_D_D
222 );
223
224 --==============================================================
225 --======================M A C M U X ===========================
226 --==============================================================
227 MACMUX_inst : MAC_MUX
228 generic map(
229 Input_SZ_A => Input_SZ_A+Input_SZ_B,
230 Input_SZ_B => Input_SZ_A+Input_SZ_B
231
232 )
233 port map(
234 sel => MACMUXsel_D,
235 INA1 => ADDERout,
236 INA2 => OP2_D_Resz,
237 INB1 => MULTout,
238 INB2 => OP1_D_Resz,
239 OUTA => ADDERinA,
240 OUTB => ADDERinB
241 );
242 OP1_D_Resz <= std_logic_vector(resize(signed(OP1_D),Input_SZ_A+Input_SZ_B));
243 OP2_D_Resz <= std_logic_vector(resize(signed(OP2_D),Input_SZ_A+Input_SZ_B));
244 --==============================================================
245
246
247 --==============================================================
248 --======================M A C M U X2 ==========================
249 --==============================================================
250 MAC_MUX2_inst : MAC_MUX2
251 generic map(Input_SZ => Input_SZ_A+Input_SZ_B)
252 port map(
253 sel => MACMUX2sel_D_D,
254 RES2 => MULTout_D,
255 RES1 => ADDERout,
256 RES => RES
257 );
258
259
260 --==============================================================
261
262 end ar_MAC;
Show file before | Show file after | Hide comments
@@ -52,6 +52,7 Patch-GRLIB: init doc
52 sh $(SCRIPTSDIR)/patch.sh $(GRLIB)
52 sh $(SCRIPTSDIR)/patch.sh $(GRLIB)
53
53
54 link:
54 link:
55 sh $(SCRIPTSDIR)/vhdlsynPatcher.sh
55 sh $(SCRIPTSDIR)/linklibs.sh $(GRLIB)
56 sh $(SCRIPTSDIR)/linklibs.sh $(GRLIB)
56 sh $(SCRIPTSDIR)/patchboards.sh $(GRLIB)
57 sh $(SCRIPTSDIR)/patchboards.sh $(GRLIB)
57
58
Show file before | Show file after | Hide comments
@@ -1,11 +1,31
1 NET "CLK" LOC = "B10";
1 NET "CLK" LOC = "B10" | IOSTANDARD = LVCMOS33;
2
3 NET "RESET" CLOCK_DEDICATED_ROUTE = FALSE;
2 NET "RESET" LOC = "A5" | IOSTANDARD = LVTTL;
4 NET "RESET" LOC = "A5" | IOSTANDARD = LVTTL;
5
6 NET "SCLK" CLOCK_DEDICATED_ROUTE = FALSE;
3 NET "SCLK" LOC = "V22" | IOSTANDARD = LVTTL;
7 NET "SCLK" LOC = "V22" | IOSTANDARD = LVTTL;
8
4 NET "GATE" LOC = "T22" | IOSTANDARD = LVTTL;
9 NET "GATE" LOC = "T22" | IOSTANDARD = LVTTL;
10
11 NET "MINF" CLOCK_DEDICATED_ROUTE = FALSE;
5 NET "MINF" LOC = "T21" | IOSTANDARD = LVTTL;
12 NET "MINF" LOC = "T21" | IOSTANDARD = LVTTL;
13
6 NET "MAJF" LOC = "U22" | IOSTANDARD = LVTTL;
14 NET "MAJF" LOC = "U22" | IOSTANDARD = LVTTL;
7 NET "DATA" LOC = "V21";
15 NET "DATA" LOC = "V21" | IOSTANDARD = LVCMOS33;
8 NET "DC_ADC_SCLK" LOC = "AB17";
16 NET "DC_ADC_SCLK" LOC = "AB17" | IOSTANDARD = LVCMOS33;
9 NET "DC_ADC_IN(0)" LOC = "AB19" | IOSTANDARD = LVTTL;
17 NET "DC_ADC_IN(0)" LOC = "AB19" | IOSTANDARD = LVTTL;
10 NET "DC_ADC_IN(1)" LOC = "AA18" | IOSTANDARD = LVTTL;
18 NET "DC_ADC_IN(1)" LOC = "AA18" | IOSTANDARD = LVTTL;
11 NET "DC_ADC_FSynch" LOC = "AB18";
19 NET "DC_ADC_FSynch" LOC = "AB18" | IOSTANDARD = LVCMOS33;
20 NET "LED" LOC = "A3" | IOSTANDARD = LVCMOS33;
21 NET "SET_RESET0" LOC = "AB21" | IOSTANDARD = LVCMOS33;
22 NET "SET_RESET1" LOC = "AB20" | IOSTANDARD = LVCMOS33;
23
24
25 NET "LF_SCK" LOC = "W20"| IOSTANDARD = LVCMOS33;
26 NET "LF_CNV" LOC = "Y18"| IOSTANDARD = LVCMOS33;
27 NET "LF_SDO1" LOC = "W17" | IOSTANDARD = LVTTL;
28 NET "LF_SDO2" LOC = "AA21" | IOSTANDARD = LVTTL;
29 NET "LF_SDO3" LOC = "AA16" | IOSTANDARD = LVTTL;
30
31
Show file before | Show file after | Hide comments
@@ -4,10 +4,11 use IEEE.numeric_std.all;
4 use IEEE.std_logic_1164.all;
4 use IEEE.std_logic_1164.all;
5
5
6
6
7 entity LF_SMPL_CLK is
7 entity LF_SMPL_CLK is
8 generic(N : integer range 0 to 4096 :=24);
8 port(
9 port(
9 Wclck : in std_logic;
10 reset : in std_logic;
10 MinF : in std_logic;
11 wclk : in std_logic;
11 SMPL_CLK : out std_logic
12 SMPL_CLK : out std_logic
12 );
13 );
13 end entity;
14 end entity;
@@ -19,24 +20,25 end entity;
19
20
20 architecture ar_LF_SMPL_CLK of LF_SMPL_CLK is
21 architecture ar_LF_SMPL_CLK of LF_SMPL_CLK is
21
22
22 signal cpt : integer range 0 to 23 := 0;
23 signal cpt : integer range 0 to N-1 := 0;
23 begin
24 begin
24
25
25
26
26
27
27 process(Wclck,MinF)
28 process(reset,wclk)
28 begin
29 begin
29 if MinF = '0' then
30 if reset = '0' then
30 SMPL_CLK <= '1';
31 SMPL_CLK <= '1';
31 elsif Wclck'event and Wclck = '1' then
32 cpt <= 0;
32 if cpt = 23 then
33 elsif wclk'event and wclk = '1' then
34 if cpt = (N-1) then
33 cpt <= 0;
35 cpt <= 0;
34 else
36 else
35 cpt <= cpt+1;
37 cpt <= cpt+1;
36 end if;
38 end if;
37 if cpt = 0 then
39 if cpt = 0 then
38 SMPL_CLK <= '1';
40 SMPL_CLK <= '1';
39 elsif cpt = 10 then
41 elsif cpt = (N/2) then
40 SMPL_CLK <= '0';
42 SMPL_CLK <= '0';
41 end if;
43 end if;
42 end if;
44 end if;
Show file before | Show file after | Hide comments
@@ -4,11 +4,11 include .config
4 TOP=ici4
4 TOP=ici4
5 BOARD=ICI4-main-BD
5 BOARD=ICI4-main-BD
6 #BOARD=SP601
6 #BOARD=SP601
7 include $(GRLIB)/boards/$(BOARD)/Makefile.inc
7 include ../../boards/$(BOARD)/Makefile.inc
8 DEVICE=$(PART)-$(PACKAGE)$(SPEED)
8 DEVICE=$(PART)-$(PACKAGE)$(SPEED)
9 #UCF=$(GRLIB)/boards/$(BOARD)/ICI3.ucf
9 #UCF=$(GRLIB)/boards/$(BOARD)/ICI3.ucf
10 UCF=$(GRLIB)/boards/$(BOARD)/ICI4-Main-BD.ucf
10 UCF=../../boards/$(BOARD)/ICI4-Main-BD.ucf
11 QSF=$(GRLIB)/boards/$(BOARD)/$(TOP).qsf
11 QSF=../../boards/$(BOARD)/$(TOP).qsf
12 EFFORT=high
12 EFFORT=high
13 ISEMAPOPT="-timing"
13 ISEMAPOPT="-timing"
14 XSTOPT=""
14 XSTOPT=""
@@ -19,7 +19,17 VHDLOPTSYNFILES= \
19 ICI4HDL/DC_FRAME_PLACER.vhd \
19 ICI4HDL/DC_FRAME_PLACER.vhd \
20 ICI4HDL/DC_SMPL_CLK.vhd \
20 ICI4HDL/DC_SMPL_CLK.vhd \
21 ICI4HDL/LF_FRAME_PLACER.vhd \
21 ICI4HDL/LF_FRAME_PLACER.vhd \
22 ICI4HDL/LF_SMPL_CLK.vhd
22 ICI4HDL/LF_SMPL_CLK.vhd \
23 ICI4HDL/Fast2SlowSync.vhd \
24 ICI4HDL/Slow2FastSync.vhd \
25 ICI4HDL/CrossDomainSyncGen.vhd \
26 ICI4HDL/TM_MODULE.vhd \
27 ICI4HDL/DC_ACQ_TOP.vhd \
28 ICI4HDL/LF_ACQ_TOP.vhd \
29 ICI4HDL/FAKE_ADC.vhd \
30 ICI4HDL/OneShot.vhd \
31 ICI4HDL/IIR_FILTER_TOP.vhd
32
23
33
24 VHDLSYNFILES= \
34 VHDLSYNFILES= \
25 config.vhd ici4.vhd
35 config.vhd ici4.vhd
@@ -27,7 +37,7 VHDLSIMFILES=testbench.vhd
27 SIMTOP=testbench
37 SIMTOP=testbench
28 #SDCFILE=$(GRLIB)/boards/$(BOARD)/default.sdc
38 #SDCFILE=$(GRLIB)/boards/$(BOARD)/default.sdc
29 SDCFILE=default.sdc
39 SDCFILE=default.sdc
30 BITGEN=$(GRLIB)/boards/$(BOARD)/default.ut
40 BITGEN=../../boards/$(BOARD)/default.ut
31 CLEAN=soft-clean
41 CLEAN=soft-clean
32 VCOMOPT=-explicit
42 VCOMOPT=-explicit
33 TECHLIBS = secureip unisim
43 TECHLIBS = secureip unisim
@@ -47,4 +57,5 include $(GRLIB)/software/leon3/Makefile
47
57
48 ################## project specific targets ##########################
58 ################## project specific targets ##########################
49
59
50
60 flash:
61 xc3sprog -c ftdi -p 1 ici4.bit
Show file before | Show file after | Hide comments
@@ -9,8 +9,10
9
9
10 library techmap;
10 library techmap;
11 use techmap.gencomp.all;
11 use techmap.gencomp.all;
12 library ieee;
12 LIBRARY IEEE;
13 use ieee.std_logic_1164.all;
13 USE IEEE.numeric_std.ALL;
14 USE IEEE.std_logic_1164.ALL;
15
14
16
15 package config is
17 package config is
16 -- Technology and synthesis options
18 -- Technology and synthesis options
@@ -19,8 +21,8 package config is
19 constant CFG_PADTECH : integer := spartan6;
21 constant CFG_PADTECH : integer := spartan6;
20 -- Clock generator
22 -- Clock generator
21 constant CFG_CLKTECH : integer := spartan6;
23 constant CFG_CLKTECH : integer := spartan6;
22 constant SEND_CONSTANT_DATA : integer := 1;
24 constant SEND_CONSTANT_DATA : integer := 0;
23 constant SEND_MINF_VALUE : integer := 1;
25 constant SEND_MINF_VALUE : integer := 0;
24
26
25
27
26
28
@@ -29,13 +31,13 constant LF2cst : std_logic_vector(15
29 constant LF3cst : std_logic_vector(15 downto 0) := X"3333";
31 constant LF3cst : std_logic_vector(15 downto 0) := X"3333";
30
32
31
33
32 constant AMR1Xcst : std_logic_vector(23 downto 0):= X"444444";
34 constant AMR1Xcst : std_logic_vector(23 downto 0):= X"000001";
33 constant AMR1Ycst : std_logic_vector(23 downto 0):= X"555555";
35 constant AMR1Ycst : std_logic_vector(23 downto 0):= X"111111";
34 constant AMR1Zcst : std_logic_vector(23 downto 0):= X"666666";
36 constant AMR1Zcst : std_logic_vector(23 downto 0):= X"7FFFFF";
35
37
36 constant AMR2Xcst : std_logic_vector(23 downto 0):= X"777777";
38 constant AMR2Xcst : std_logic_vector(23 downto 0):= X"800000";
37 constant AMR2Ycst : std_logic_vector(23 downto 0):= X"888888";
39 constant AMR2Ycst : std_logic_vector(23 downto 0):= X"000002";
38 constant AMR2Zcst : std_logic_vector(23 downto 0):= X"999999";
40 constant AMR2Zcst : std_logic_vector(23 downto 0):= X"800001";
39
41
40 constant AMR3Xcst : std_logic_vector(23 downto 0):= X"AAAAAA";
42 constant AMR3Xcst : std_logic_vector(23 downto 0):= X"AAAAAA";
41 constant AMR3Ycst : std_logic_vector(23 downto 0):= X"BBBBBB";
43 constant AMR3Ycst : std_logic_vector(23 downto 0):= X"BBBBBB";
@@ -49,4 +51,95 constant Temp1cst : std_logic_vec
49 constant Temp2cst : std_logic_vector(23 downto 0):= X"343434";
51 constant Temp2cst : std_logic_vector(23 downto 0):= X"343434";
50 constant Temp3cst : std_logic_vector(23 downto 0):= X"565656";
52 constant Temp3cst : std_logic_vector(23 downto 0):= X"565656";
51 constant Temp4cst : std_logic_vector(23 downto 0):= X"787878";
53 constant Temp4cst : std_logic_vector(23 downto 0):= X"787878";
54
55
56
57 --===========================================================|
58 --========F I L T E R C O N F I G V A L U E S=============|
59 --===========================================================|
60 --____________________________
61 --Bus Width and chanels number|
62 --____________________________|
63 constant ChanelsCount : integer := 3;
64 constant Sample_SZ : integer := 16;
65 constant Coef_SZ : integer := 9;
66 constant CoefCntPerCel: integer := 6;
67 constant CoefPerCel: integer := 5;
68 constant Cels_count : integer := 5;
69 constant virgPos : integer := 7;
70 constant Mem_use : integer := 1;
71
72
73
74 --============================================================
75 -- create each initial values for each coefs ============
76 --!!!!!!!!!!It should be interfaced with a software !!!!!!!!!!
77 --============================================================
78 constant b0_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(58,Coef_SZ));
79 constant b0_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-66,Coef_SZ));
80 constant b0_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(58,Coef_SZ));
81
82 constant b1_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(58,Coef_SZ));
83 constant b1_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-57,Coef_SZ));
84 constant b1_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(58,Coef_SZ));
85
86 constant b2_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(29,Coef_SZ));
87 constant b2_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-17,Coef_SZ));
88 constant b2_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(29,Coef_SZ));
89
90 constant b3_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(15,Coef_SZ));
91 constant b3_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(4,Coef_SZ));
92 constant b3_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(15,Coef_SZ));
93
94 constant b4_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(15,Coef_SZ));
95 constant b4_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(24,Coef_SZ));
96 constant b4_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(15,Coef_SZ));
97
98 --constant b5_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-81,Coef_SZ));
99 --constant b5_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-153,Coef_SZ));
100 --constant b5_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-171,Coef_SZ));
101
102 --constant b6_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-144,Coef_SZ));
103 --constant b6_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-72,Coef_SZ));
104 --constant b6_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-25,Coef_SZ));
105
106
107 constant a0_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-128,Coef_SZ));
108 constant a0_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(189,Coef_SZ));
109 constant a0_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-111,Coef_SZ));
110
111 constant a1_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-128,Coef_SZ));
112 constant a1_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(162,Coef_SZ));
113 constant a1_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-81,Coef_SZ));
114
115 constant a2_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-128,Coef_SZ));
116 constant a2_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(136,Coef_SZ));
117 constant a2_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-55,Coef_SZ));
118
119 constant a3_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-128,Coef_SZ));
120 constant a3_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(114,Coef_SZ));
121 constant a3_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-33,Coef_SZ));
122
123 constant a4_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-128,Coef_SZ));
124 constant a4_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(100,Coef_SZ));
125 constant a4_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-20,Coef_SZ));
126
127 --constant a5_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(60,Coef_SZ));
128 --constant a5_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-128,Coef_SZ));
129 --constant a5_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(87,Coef_SZ));
130 --constant a6_0 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(60,Coef_SZ));
131 --constant a6_1 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(-128,Coef_SZ));
132 --constant a6_2 : std_logic_vector(Coef_SZ-1 downto 0) := std_logic_vector(TO_SIGNED(87,Coef_SZ));
133
134 constant CoefsInitValCst : std_logic_vector((Cels_count*CoefCntPerCel*Coef_SZ)-1 downto 0) := (a4_2 & a4_1 & a4_0 & b4_2 & b4_1 & b4_0 & a3_2 & a3_1 & a3_0 & b3_2 & b3_1 & b3_0 & a2_2 & a2_1 & a2_0 & b2_2 & b2_1 & b2_0 & a1_2 & a1_1 & a1_0 & b1_2 & b1_1 & b1_0 & a0_2 & a0_1 & a0_0 & b0_2 & b0_1 & b0_0);
135
136 constant CoefsInitValCst_v2 : std_logic_vector((Cels_count*CoefPerCel*Coef_SZ)-1 downto 0) :=
137 (a4_1 & a4_2 & b4_0 & b4_1 & b4_2 &
138 a3_1 & a3_2 & b3_0 & b3_1 & b3_2 &
139 a2_1 & a2_2 & b2_0 & b2_1 & b2_2 &
140 a1_1 & a1_2 & b1_0 & b1_1 & b1_2 &
141 a0_1 & a0_2 & b0_0 & b0_1 & b0_2 );
142
143
144
52 end;
145 end;
Show file before | Show file after | Hide comments
@@ -1,5 +1,5
1 library ieee;
1 library ieee;
2 use ieee.std_logic_1164.all;
2 use ieee.std_logic_1164.all;
3 use IEEE.numeric_std.all;
3 use IEEE.numeric_std.all;
4 library grlib, techmap;
4 library grlib, techmap;
5 use grlib.amba.all;
5 use grlib.amba.all;
@@ -25,6 +25,14 use work.Convertisseur_config.all;
25
25
26
26
27 use work.config.all;
27 use work.config.all;
28 --==================================================================
29 --
30 --
31 -- FPGA FREQ = 48MHz
32 -- ADC Oscillator frequency = 12MHz
33 --
34 --
35 --==================================================================
28
36
29 entity ici4 is
37 entity ici4 is
30 generic (
38 generic (
@@ -35,20 +43,25 entity ici4 is
35 WordSize : integer := 8; WordCnt : integer := 144;MinFCount : integer := 64
43 WordSize : integer := 8; WordCnt : integer := 144;MinFCount : integer := 64
36 );
44 );
37 port (
45 port (
38 reset : in std_ulogic;
46 reset : in std_ulogic;
39 clk : in std_ulogic;
47 clk : in std_ulogic;
40 sclk : in std_logic;
48 sclk : in std_logic;
41 Gate : in std_logic;
49 Gate : in std_logic;
42 MinF : in std_logic;
50 MinF : in std_logic;
43 MajF : in std_logic;
51 MajF : in std_logic;
44 Data : out std_logic;
52 Data : out std_logic;
45 DC_ADC_Sclk : out std_logic;
53 LF_SCK : out std_logic;
46 DC_ADC_IN : in std_logic_vector(1 downto 0);
54 LF_CNV : out std_logic;
47 DC_ADC_ClkDiv : out std_logic;
55 LF_SDO1 : in std_logic;
48 DC_ADC_FSynch : out std_logic;
56 LF_SDO2 : in std_logic;
49 SET_RESET0 : out std_logic;
57 LF_SDO3 : in std_logic;
50 SET_RESET1 : out std_logic;
58 DC_ADC_Sclk : out std_logic;
51 LED : out std_logic
59 DC_ADC_IN : in std_logic_vector(1 downto 0);
60 DC_ADC_ClkDiv : out std_logic;
61 DC_ADC_FSynch : out std_logic;
62 SET_RESET0 : out std_logic;
63 SET_RESET1 : out std_logic;
64 LED : out std_logic
52 );
65 );
53 end;
66 end;
54
67
@@ -58,17 +71,10 signal clk_buf,reset_buf : std_logi
58
71
59 Constant FramePlacerCount : integer := 2;
72 Constant FramePlacerCount : integer := 2;
60
73
61 signal MinF_Inv : std_logic;
74
62 signal Gate_Inv : std_logic;
63 signal sclk_Inv : std_logic;
64 signal WordCount : integer range 0 to WordCnt-1;
75 signal WordCount : integer range 0 to WordCnt-1;
65 signal WordClk : std_logic;
76 signal WordClk : std_logic;
66
77
67 signal data_int : std_logic;
68
69 signal MuxOUT : std_logic_vector(WordSize-1 downto 0);
70 signal MuxIN : std_logic_vector((2*WordSize)-1 downto 0);
71 signal Sel : integer range 0 to 1;
72
78
73 signal AMR1X : std_logic_vector(23 downto 0);
79 signal AMR1X : std_logic_vector(23 downto 0);
74 signal AMR1Y : std_logic_vector(23 downto 0);
80 signal AMR1Y : std_logic_vector(23 downto 0);
@@ -86,229 +92,155 signal AMR4X : std_logic_vector(2
86 signal AMR4Y : std_logic_vector(23 downto 0);
92 signal AMR4Y : std_logic_vector(23 downto 0);
87 signal AMR4Z : std_logic_vector(23 downto 0);
93 signal AMR4Z : std_logic_vector(23 downto 0);
88
94
89 signal Temp1 : std_logic_vector(23 downto 0);
90 signal Temp2 : std_logic_vector(23 downto 0);
91 signal Temp3 : std_logic_vector(23 downto 0);
92 signal Temp4 : std_logic_vector(23 downto 0);
93
95
96 signal TEMP1 : std_logic_vector(23 downto 0);
97 signal TEMP2 : std_logic_vector(23 downto 0);
98 signal TEMP3 : std_logic_vector(23 downto 0);
99 signal TEMP4 : std_logic_vector(23 downto 0);
94
100
95 signal LF1 : std_logic_vector(15 downto 0);
101 signal LF1 : std_logic_vector(15 downto 0);
96 signal LF2 : std_logic_vector(15 downto 0);
102 signal LF2 : std_logic_vector(15 downto 0);
97 signal LF3 : std_logic_vector(15 downto 0);
103 signal LF3 : std_logic_vector(15 downto 0);
98
104
99
105 signal data_int : std_logic;
100 signal LF1_int : std_logic_vector(23 downto 0);
101 signal LF2_int : std_logic_vector(23 downto 0);
102 signal LF3_int : std_logic_vector(23 downto 0);
103
106
104 signal DC_ADC_SmplClk : std_logic;
107 signal CrossDomainSync : std_logic;
105 signal LF_ADC_SmplClk : std_logic;
106 signal SET_RESET0_sig : std_logic;
107 signal SET_RESET1_sig : std_logic;
108
109 signal MinFCnt : integer range 0 to MinFCount-1;
110
111 signal FramePlacerFlags : std_logic_vector(FramePlacerCount-1 downto 0);
112
108
113 begin
109 begin
114
110
115
111
116 clk_buf <= clk;
117 reset_buf <= reset;
118 --
119
120 Gate_Inv <= not Gate;
121 sclk_Inv <= not Sclk;
122 MinF_Inv <= not MinF;
123
124 LED <= not data_int;
112 LED <= not data_int;
125 data <= data_int;
113 data <= data_int;
126
127
128
129 SD0 : Serial_Driver
130 generic map(WordSize)
131 port map(sclk_Inv,MuxOUT,Gate_inv,data_int);
132
133 WC0 : Word_Cntr
134 generic map(WordSize,WordCnt)
135 port map(sclk_Inv,MinF,WordClk,WordCount);
136
137 MFC0 : MinF_Cntr
138 generic map(MinFCount)
139 port map(
140 clk => MinF_Inv,
141 reset => MajF,
142 Cnt_out => MinFCnt
143 );
144
145
146 MUX0 : Serial_Driver_Multiplexor
147 generic map(FramePlacerCount,WordSize)
148 port map(sclk_Inv,Sel,MuxIN,MuxOUT);
149
150
151 DCFP0 : entity work.DC_FRAME_PLACER
152 generic map(WordSize,WordCnt,MinFCount)
153 port map(
154 clk => Sclk,
155 Wcount => WordCount,
156 MinFCnt => MinFCnt,
157 Flag => FramePlacerFlags(0),
158 AMR1X => AMR1X,
159 AMR1Y => AMR1Y,
160 AMR1Z => AMR1Z,
161 AMR2X => AMR2X,
162 AMR2Y => AMR2Y,
163 AMR2Z => AMR2Z,
164 AMR3X => AMR3X,
165 AMR3Y => AMR3Y,
166 AMR3Z => AMR3Z,
167 AMR4X => AMR4X,
168 AMR4Y => AMR4Y,
169 AMR4Z => AMR4Z,
170 Temp1 => Temp1,
171 Temp2 => Temp2,
172 Temp3 => Temp3,
173 Temp4 => Temp4,
174 WordOut => MuxIN(7 downto 0));
175
176
177
178 LFP0 : entity work.LF_FRAME_PLACER
179 generic map(WordSize,WordCnt,MinFCount)
180 port map(
181 clk => Sclk,
182 Wcount => WordCount,
183 Flag => FramePlacerFlags(1),
184 LF1 => LF1,
185 LF2 => LF2,
186 LF3 => LF3,
187 WordOut => MuxIN(15 downto 8));
188
189
190
191 DC_SMPL_CLK0 : entity work.DC_SMPL_CLK
192 port map(MinF_Inv,DC_ADC_SmplClk);
193
194 process(reset,DC_ADC_SmplClk)
195 begin
196 if reset = '0' then
197 SET_RESET0_sig <= '0';
198 elsif DC_ADC_SmplClk'event and DC_ADC_SmplClk = '1' then
199 SET_RESET0_sig <= not SET_RESET0_sig;
200 end if;
201 end process;
202
203 SET_RESET1_sig <= SET_RESET0_sig;
204 SET_RESET0 <= SET_RESET0_sig;
205 SET_RESET1 <= SET_RESET1_sig;
206 --
207
114
208
115
209
116
210 send_ADC_DATA : IF SEND_CONSTANT_DATA = 0 GENERATE
117 CDS0 : entity work.CrossDomainSyncGen
211 DC_ADC0 : DUAL_ADS1278_DRIVER --With AMR down ! => 24bits DC TM -> SC high res on Spin
118 Port map(
212 port map(
119 reset => reset,
213 Clk => clk_buf,
120 ClockS => sclk,
214 reset => reset_buf,
121 ClockF => clk,
215 SpiClk => DC_ADC_Sclk,
122 SyncSignal => CrossDomainSync
216 DIN => DC_ADC_IN,
123 );
217 SmplClk => DC_ADC_SmplClk,
218 OUT00 => AMR1X,
219 OUT01 => AMR1Y,
220 OUT02 => AMR1Z,
221 OUT03 => AMR2X,
222 OUT04 => AMR2Y,
223 OUT05 => AMR2Z,
224 OUT06 => Temp1,
225 OUT07 => Temp2,
226 OUT10 => AMR3X,
227 OUT11 => AMR3Y,
228 OUT12 => AMR3Z,
229 OUT13 => AMR4X,
230 OUT14 => AMR4Y,
231 OUT15 => AMR4Z,
232 OUT16 => Temp3,
233 OUT17 => Temp4,
234 FSynch => DC_ADC_FSynch
235 );
236 LF1 <= LF1cst;
237 LF2 <= LF2cst;
238 LF3 <= LF3cst;
239 END GENERATE;
240
124
241 send_CST_DATA : IF (SEND_CONSTANT_DATA = 1) and (SEND_MINF_VALUE = 0) GENERATE
125 TM : entity work.TM_MODULE
242 AMR1X <= AMR1Xcst;
126 generic map(
243 AMR1Y <= AMR1Ycst;
127 WordSize => WordSize,
244 AMR1Z <= AMR1Zcst;
128 WordCnt => WordCnt,
245 AMR2X <= AMR2Xcst;
129 MinFCount => MinFCount
246 AMR2Y <= AMR2Ycst;
130 )
247 AMR2Z <= AMR2Zcst;
131 port map(
248 Temp1 <= Temp1cst;
132
249 Temp2 <= Temp2cst;
133 reset =>reset,
250 AMR3X <= AMR3Xcst;
134 clk =>clk,
251 AMR3Y <= AMR3Ycst;
135 MinF =>MinF,
252 AMR3Z <= AMR3Zcst;
136 MajF =>MajF,
253 AMR4X <= AMR4Xcst;
137 sclk =>sclk,
254 AMR4Y <= AMR4Ycst;
138 gate =>gate,
255 AMR4Z <= AMR4Zcst;
139 data =>data_int,
256 Temp3 <= Temp3cst;
140 WordClk =>WordClk,
257 Temp4 <= Temp4cst;
258
259 LF1 <= LF1cst;
260 LF2 <= LF2cst;
261 LF3 <= LF3cst;
262 END GENERATE;
263
264
265
141
266
142
267 send_minF_valuelbl : IF (SEND_CONSTANT_DATA = 1) and (SEND_MINF_VALUE = 1) GENERATE
143 LF1 => LF1,
268 AMR1X <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
144 LF2 => LF2,
269 AMR1Y <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
145 LF3 => LF3,
270 AMR1Z <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
146
271 AMR2X <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
147 AMR1X => AMR1X,
272 AMR2Y <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
148 AMR1Y => AMR1Y,
273 AMR2Z <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
149 AMR1Z => AMR1Z,
274 Temp1 <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
150
275 Temp2 <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
151 AMR2X => AMR2X,
276 AMR3X <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
152 AMR2Y => AMR2Y,
277 AMR3Y <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
153 AMR2Z => AMR2Z,
278 AMR3Z <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
154
279 AMR4X <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
155 AMR3X => AMR3X,
280 AMR4Y <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
156 AMR3Y => AMR3Y,
281 AMR4Z <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
157 AMR3Z => AMR3Z,
282 Temp3 <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
158
283 Temp4 <= X"000" & "000" & std_logic_vector(TO_UNSIGNED(MinFCnt,9));
159 AMR4X => AMR4X,
284
160 AMR4Y => AMR4Y,
285 LF1 <= LF1cst;
161 AMR4Z => AMR4Z,
286 LF2 <= LF2cst;
162
287 LF3 <= LF3cst;
163 Temp1 => Temp1,
288 END GENERATE;
164 Temp2 => Temp2,
165 Temp3 => Temp3,
166 Temp4 => Temp4
167 );
289
168
290 LF_SMPL_CLK0 : entity work.LF_SMPL_CLK
169 DC_ADC0:entity work.DC_ACQ_TOP
170 generic map (
171 WordSize => WordSize,
172 WordCnt => WordCnt,
173 MinFCount => MinFCount,
174 EnableSR => 0,
175 CstDATA => SEND_CONSTANT_DATA,
176 FakeADC => 0
177 )
291 port map(
178 port map(
292 Wclck => WordClk,
179
293 MinF => MinF,
180 reset => reset,
294 SMPL_CLK => LF_ADC_SmplClk
181 clk => clk,
182 SyncSig => CrossDomainSync,
183 minorF => minF,
184 majorF => majF,
185 sclk => sclk,
186 WordClk => WordClk,
187
188 DC_ADC_Sclk => DC_ADC_Sclk,
189 DC_ADC_IN => DC_ADC_IN,
190 DC_ADC_ClkDiv => DC_ADC_ClkDiv,
191 DC_ADC_FSynch => DC_ADC_FSynch,
192 SET_RESET0 => SET_RESET0,
193 SET_RESET1 => SET_RESET1,
194
195 AMR1X => AMR1X,
196 AMR1Y => AMR1Y,
197 AMR1Z => AMR1Z,
198
199 AMR2X => AMR2X,
200 AMR2Y => AMR2Y,
201 AMR2Z => AMR2Z,
202
203 AMR3X => AMR3X,
204 AMR3Y => AMR3Y,
205 AMR3Z => AMR3Z,
206
207 AMR4X => AMR4X,
208 AMR4Y => AMR4Y,
209 AMR4Z => AMR4Z,
210
211 Temp1 => Temp1,
212 Temp2 => Temp2,
213 Temp3 => Temp3,
214 Temp4 => Temp4
295 );
215 );
296
216
297
217
218 LF: entity work.LF_ACQ_TOP
219 generic map(
220 WordSize => WordSize,
221 WordCnt => WordCnt,
222 MinFCount => MinFCount,
223 CstDATA => SEND_CONSTANT_DATA,
224 IIRFilter => 0
225 )
226 port map(
298
227
299 process(clk)
228 reset => reset,
300 variable SelVar : integer range 0 to 1;
229 clk => clk,
301 begin
230 SyncSig => CrossDomainSync,
302 if clk'event and clk ='1' then
231 minorF => minF,
303 Decoder: FOR i IN 0 to FramePlacerCount-1 loop
232 majorF => majF,
304 if FramePlacerFlags(i) = '1' then
233 sclk => sclk,
305 SelVar := i;
234 WordClk => WordClk,
306 end if;
235 LF_SCK => LF_SCK,
307 END loop Decoder;
236 LF_CNV => LF_CNV,
308 Sel <= SelVar;
237 LF_SDO1 => LF_SDO1,
309 end if;
238 LF_SDO2 => LF_SDO2,
310 end process;
239 LF_SDO3 => LF_SDO3,
311
240 LF1 => LF1,
241 LF2 => LF2,
242 LF3 => LF3
243 );
312
244
313 end rtl;
245 end rtl;
314
246
Show file before | Show file after | Hide comments
@@ -137,7 +137,7 port map(
137
137
138
138
139
139
140 ALU_inst :ALU
140 ALU_inst : ALU_V0
141 generic map(Logic_en => 0,Input_SZ_1 => Sample_SZ, Input_SZ_2 => Coef_SZ)
141 generic map(Logic_en => 0,Input_SZ_1 => Sample_SZ, Input_SZ_2 => Coef_SZ)
142 port map(
142 port map(
143 clk => clk,
143 clk => clk,
@@ -178,7 +178,7 if reset = '0' then
178
178
179 smpl_clk_old <= '0';
179 smpl_clk_old <= '0';
180 RAM_sample_in <= (others=> '0');
180 RAM_sample_in <= (others=> '0');
181 ALU_ctrl <= IDLE;
181 ALU_ctrl <= IDLE_V0;
182 ALU_sample_in <= (others=> '0');
182 ALU_sample_in <= (others=> '0');
183 ALU_Coef_in <= (others=> '0');
183 ALU_Coef_in <= (others=> '0');
184 RAM_sample_in_bk<= (others=> '0');
184 RAM_sample_in_bk<= (others=> '0');
@@ -206,7 +206,7 elsif clk'event and clk = '1' then
206 ALU_sample_in <= std_logic_vector(sample_in_BUFF(0));
206 ALU_sample_in <= std_logic_vector(sample_in_BUFF(0));
207
207
208 else
208 else
209 ALU_ctrl <= IDLE;
209 ALU_ctrl <= IDLE_V0;
210 smplConnectL0: for i in 0 to ChanelsCount-1 loop
210 smplConnectL0: for i in 0 to ChanelsCount-1 loop
211 smplConnectL1: for j in 0 to Sample_SZ-1 loop
211 smplConnectL1: for j in 0 to Sample_SZ-1 loop
212 sample_in_BUFF(i)(j) <= sample_in(i,j);
212 sample_in_BUFF(i)(j) <= sample_in(i,j);
@@ -219,12 +219,12 elsif clk'event and clk = '1' then
219
219
220 when pipe1 =>
220 when pipe1 =>
221 IIR_CEL_STATE <= computeb1;
221 IIR_CEL_STATE <= computeb1;
222 ALU_ctrl <= MAC_op;
222 ALU_ctrl <= MAC_op_V0;
223 ALU_Coef_in <= std_logic_vector(CoefsReg.NumCoefs(curentCel)(0));
223 ALU_Coef_in <= std_logic_vector(CoefsReg.NumCoefs(curentCel)(0));
224
224
225 when computeb1 =>
225 when computeb1 =>
226
226
227 ALU_ctrl <= MAC_op;
227 ALU_ctrl <= MAC_op_V0;
228 ALU_sample_in <= RAM_sample_out;
228 ALU_sample_in <= RAM_sample_out;
229 ALU_Coef_in <= std_logic_vector(CoefsReg.NumCoefs(curentCel)(1));
229 ALU_Coef_in <= std_logic_vector(CoefsReg.NumCoefs(curentCel)(1));
230 IIR_CEL_STATE <= computeb2;
230 IIR_CEL_STATE <= computeb2;
@@ -248,7 +248,7 elsif clk'event and clk = '1' then
248
248
249
249
250 when next_cel =>
250 when next_cel =>
251 ALU_ctrl <= clr_mac;
251 ALU_ctrl <= clr_mac_V0;
252 IIR_CEL_STATE <= pipe2;
252 IIR_CEL_STATE <= pipe2;
253
253
254 when pipe2 =>
254 when pipe2 =>
@@ -281,7 +281,7 rotate : for i in 1 to ChanelsCount-1
281
281
282 if curentChan = (ChanelsCount-1) then
282 if curentChan = (ChanelsCount-1) then
283 IIR_CEL_STATE <= waiting;
283 IIR_CEL_STATE <= waiting;
284 ALU_ctrl <= clr_mac;
284 ALU_ctrl <= clr_mac_V0;
285 elsif ChanelsCount>1 then
285 elsif ChanelsCount>1 then
286 curentChan <= curentChan + 1;
286 curentChan <= curentChan + 1;
287 IIR_CEL_STATE <= pipe1;
287 IIR_CEL_STATE <= pipe1;
Show file before | Show file after | Hide comments
@@ -1,19 +1,19
1 APB_IIR_CEL.vhd
1 APB_IIR_CEL.vhd
2 APB_IIR_Filter.vhd
2 APB_IIR_Filter.vhd
3 FILTER.vhd
4 FILTER_RAM_CTRLR.vhd
5 FILTERcfg.vhd
3 FILTERcfg.vhd
6 FilterCTRLR.vhd
4 FilterCTRLR.vhd
7 IIR_CEL_CTRLR.vhd
5 FILTER_RAM_CTRLR.vhd
8 IIR_CEL_CTRLR_v2.vhd
6 FILTER.vhd
9 IIR_CEL_CTRLR_v2_CONTROL.vhd
7 IIR_CEL_CTRLR_v2_CONTROL.vhd
10 IIR_CEL_CTRLR_v2_DATAFLOW.vhd
8 IIR_CEL_CTRLR_v2_DATAFLOW.vhd
9 IIR_CEL_CTRLR_v2.vhd
10 IIR_CEL_CTRLR.vhd
11 IIR_CEL_FILTER.vhd
11 IIR_CEL_FILTER.vhd
12 RAM.vhd
12 iir_filter.vhd
13 RAM_CEL_N.vhd
13 RAM_CEL.vhd
14 RAM_CEL.vhd
14 RAM_CEL_N.vhd
15 RAM_CTRLR2.vhd
15 RAM_CTRLR2.vhd
16 RAM_CTRLR_v2.vhd
16 RAM_CTRLR_v2.vhd
17 RAM.vhd
17 Top_Filtre_IIR.vhd
18 Top_Filtre_IIR.vhd
18 Top_IIR.vhd
19 Top_IIR.vhd
19 iir_filter.vhd
Show file before | Show file after | Hide comments
@@ -1,10 +1,10
1 APB_FFT_half.vhd
1 APB_FFT.vhd
2 APB_FFT.vhd
2 APB_FFT_half.vhd
3 Driver_FFT.vhd
3 Driver_FFT.vhd
4 FFTamont.vhd
5 FFTaval.vhd
4 FFT.vhd
6 FFT.vhd
5 FFT.vhd.bak
7 FFT.vhd.bak
6 FFTamont.vhd
7 FFTaval.vhd
8 Flag_Extremum.vhd
8 Flag_Extremum.vhd
9 Flag_Extremum.vhd.bak
9 Flag_Extremum.vhd.bak
10 Linker_FFT.vhd
10 Linker_FFT.vhd
Show file before | Show file after | Hide comments
@@ -68,6 +68,23 PACKAGE general_purpose IS
68 );
68 );
69 END COMPONENT;
69 END COMPONENT;
70
70
71 COMPONENT Adder_V0 is
72 generic(
73 Input_SZ_A : integer := 16;
74 Input_SZ_B : integer := 16
75
76 );
77 port(
78 clk : in std_logic;
79 reset : in std_logic;
80 clr : in std_logic;
81 add : in std_logic;
82 OP1 : in std_logic_vector(Input_SZ_A-1 downto 0);
83 OP2 : in std_logic_vector(Input_SZ_B-1 downto 0);
84 RES : out std_logic_vector(Input_SZ_A-1 downto 0)
85 );
86 end COMPONENT;
87
71 COMPONENT ADDRcntr IS
88 COMPONENT ADDRcntr IS
72 PORT(
89 PORT(
73 clk : IN STD_LOGIC;
90 clk : IN STD_LOGIC;
@@ -98,14 +115,56 PACKAGE general_purpose IS
98 );
115 );
99 END COMPONENT;
116 END COMPONENT;
100
117
118 COMPONENT ALU_V0 IS
119 GENERIC(
120 Arith_en : INTEGER := 1;
121 Logic_en : INTEGER := 1;
122 Input_SZ_1 : INTEGER := 16;
123 Input_SZ_2 : INTEGER := 9
124
125 );
126 PORT(
127 clk : IN STD_LOGIC;
128 reset : IN STD_LOGIC;
129 ctrl : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
130 OP1 : IN STD_LOGIC_VECTOR(Input_SZ_1-1 DOWNTO 0);
131 OP2 : IN STD_LOGIC_VECTOR(Input_SZ_2-1 DOWNTO 0);
132 RES : OUT STD_LOGIC_VECTOR(Input_SZ_1+Input_SZ_2-1 DOWNTO 0)
133 );
134 END COMPONENT;
135
136 COMPONENT MAC_V0 is
137 generic(
138 Input_SZ_A : integer := 8;
139 Input_SZ_B : integer := 8
140
141 );
142 port(
143 clk : in std_logic;
144 reset : in std_logic;
145 clr_MAC : in std_logic;
146 MAC_MUL_ADD : in std_logic_vector(1 downto 0);
147 OP1 : in std_logic_vector(Input_SZ_A-1 downto 0);
148 OP2 : in std_logic_vector(Input_SZ_B-1 downto 0);
149 RES : out std_logic_vector(Input_SZ_A+Input_SZ_B-1 downto 0)
150 );
151 end COMPONENT;
152
101 ---------------------------------------------------------
153 ---------------------------------------------------------
102 -------- // S�lection grace a l'entr�e "ctrl" \\ --------
154 -------- // Sélection grace a l'entrée "ctrl" \\ --------
103 ---------------------------------------------------------
155 ---------------------------------------------------------
104 Constant ctrl_IDLE : std_logic_vector(2 downto 0) := "000";
156 Constant ctrl_IDLE : std_logic_vector(2 downto 0) := "000";
105 Constant ctrl_MAC : std_logic_vector(2 downto 0) := "001";
157 Constant ctrl_MAC : std_logic_vector(2 downto 0) := "001";
106 Constant ctrl_MULT : std_logic_vector(2 downto 0) := "010";
158 Constant ctrl_MULT : std_logic_vector(2 downto 0) := "010";
107 Constant ctrl_ADD : std_logic_vector(2 downto 0) := "011";
159 Constant ctrl_ADD : std_logic_vector(2 downto 0) := "011";
108 Constant ctrl_CLRMAC : std_logic_vector(2 downto 0) := "100";
160 Constant ctrl_CLRMAC : std_logic_vector(2 downto 0) := "100";
161
162
163 Constant IDLE_V0 : std_logic_vector(3 downto 0) := "0000";
164 Constant MAC_op_V0 : std_logic_vector(3 downto 0) := "0001";
165 Constant MULT_V0 : std_logic_vector(3 downto 0) := "0010";
166 Constant ADD_V0 : std_logic_vector(3 downto 0) := "0011";
167 Constant CLR_MAC_V0 : std_logic_vector(3 downto 0) := "0100";
109 ---------------------------------------------------------
168 ---------------------------------------------------------
110
169
111 COMPONENT MAC IS
170 COMPONENT MAC IS
@@ -132,10 +191,10 Constant ctrl_CLRMAC : std_logic_vector(
132 port(
191 port(
133 clk : in std_logic; --! Horloge du composant
192 clk : in std_logic; --! Horloge du composant
134 reset : in std_logic; --! Reset general du composant
193 reset : in std_logic; --! Reset general du composant
135 clr : in std_logic; --! Un reset sp�cifique au programme
194 clr : in std_logic; --! Un reset spécifique au programme
136 TwoComp : in std_logic; --! Autorise l'utilisation du compl�ment
195 TwoComp : in std_logic; --! Autorise l'utilisation du complément
137 OP : in std_logic_vector(Input_SZ-1 downto 0); --! Op�rande d'entr�e
196 OP : in std_logic_vector(Input_SZ-1 downto 0); --! Opérande d'entrée
138 RES : out std_logic_vector(Input_SZ-1 downto 0) --! R�sultat, op�rande compl�ment� ou non
197 RES : out std_logic_vector(Input_SZ-1 downto 0) --! Résultat, opérande complémenté ou non
139 );
198 );
140 end COMPONENT;
199 end COMPONENT;
141
200
Show file before | Show file after | Hide comments
@@ -1,18 +1,24
1 Adder_V0.vhd
2 Adder.vhd
1 ADDRcntr.vhd
3 ADDRcntr.vhd
4 ALU_V0.vhd
5 ALU_V0.vhd~
2 ALU.vhd
6 ALU.vhd
3 Adder.vhd
4 Clk_Divider2.vhd
7 Clk_Divider2.vhd
8 Clk_Divider2.vhd~
5 Clk_divider.vhd
9 Clk_divider.vhd
6 MAC.vhd
10 general_purpose.vhd
11 general_purpose.vhd~
7 MAC_CONTROLER.vhd
12 MAC_CONTROLER.vhd
13 MAC_MUX2.vhd
8 MAC_MUX.vhd
14 MAC_MUX.vhd
9 MAC_MUX2.vhd
10 MAC_REG.vhd
15 MAC_REG.vhd
16 MAC_V0.vhd
17 MAC.vhd
18 Multiplier.vhd
11 MUX2.vhd
19 MUX2.vhd
12 MUXN.vhd
20 MUXN.vhd
13 Multiplier.vhd
14 REG.vhd
21 REG.vhd
22 Shifter.vhd
15 SYNC_FF.vhd
23 SYNC_FF.vhd
16 Shifter.vhd
17 TwoComplementer.vhd
24 TwoComplementer.vhd
18 general_purpose.vhd
Show file before | Show file after | Hide comments
@@ -1,198 +1,114
1 ------------------------------------------------------------------------------
1 ------------------------------------------------------------------------------
2 -- This file is a part of the LPP VHDL IP LIBRARY
2 -- This file is a part of the LPP VHDL IP LIBRARY
3 -- Copyright (C) 2009 - 2010, Laboratory of Plasmas Physic - CNRS
3 -- Copyright (C) 2009 - 2010, Laboratory of Plasmas Physic - CNRS
4 --
4 --
5 -- This program is free software; you can redistribute it and/or modify
5 -- This program is free software; you can redistribute it and/or modify
6 -- it under the terms of the GNU General Public License as published by
6 -- it under the terms of the GNU General Public License as published by
7 -- the Free Software Foundation; either version 3 of the License, or
7 -- the Free Software Foundation; either version 3 of the License, or
8 -- (at your option) any later version.
8 -- (at your option) any later version.
9 --
9 --
10 -- This program is distributed in the hope that it will be useful,
10 -- This program is distributed in the hope that it will be useful,
11 -- but WITHOUT ANY WARRANTY; without even the implied warranty of
11 -- but WITHOUT ANY WARRANTY; without even the implied warranty of
12 -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 -- GNU General Public License for more details.
13 -- GNU General Public License for more details.
14 --
14 --
15 -- You should have received a copy of the GNU General Public License
15 -- You should have received a copy of the GNU General Public License
16 -- along with this program; if not, write to the Free Software
16 -- along with this program; if not, write to the Free Software
17 -- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 -- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 -------------------------------------------------------------------------------
18 -------------------------------------------------------------------------------
19 -- Author : Alexis Jeandet
19 -- Author : Alexis Jeandet
20 -- Mail : alexis.jeandet@lpp.polytechnique.fr
20 -- Mail : alexis.jeandet@lpp.polytechnique.fr
21 -------------------------------------------------------------------------------
21 ----------------------------------------------------------------------------
22 -- MODIFIED by Jean-christophe PELLION
22 library IEEE;
23 -- jean-christophe.pellion@lpp.polytechnique.fr
23 use IEEE.STD_LOGIC_1164.ALL;
24 -------------------------------------------------------------------------------
24 library lpp;
25 LIBRARY IEEE;
25 use lpp.lpp_ad_conv.all;
26 USE IEEE.STD_LOGIC_1164.ALL;
26 use lpp.general_purpose.Clk_divider;
27 LIBRARY lpp;
27
28 USE lpp.lpp_ad_conv.ALL;
28 --! \brief AD7688 driver, generates all needed signal to drive this ADC.
29 USE lpp.general_purpose.SYNC_FF;
29 --!
30
30 --! \author Alexis Jeandet alexis.jeandet@lpp.polytechnique.fr
31 ENTITY AD7688_drvr IS
31
32 GENERIC(
32 entity AD7688_drvr is
33 ChanelCount : INTEGER;
33 generic(
34 ncycle_cnv_high : INTEGER := 79;
34 ChanelCount :integer; --! Number of ADC you whant to drive
35 ncycle_cnv : INTEGER := 500);
35 clkkHz :integer --! System clock frequency in kHz usefull to generate some pulses with good width.
36 PORT (
36 );
37 -- CONV --
37 Port(
38 cnv_clk : IN STD_LOGIC;
38 clk : in STD_LOGIC; --! System clock
39 cnv_rstn : IN STD_LOGIC;
39 rstn : in STD_LOGIC; --! System reset
40 cnv_run : IN STD_LOGIC;
40 enable : in std_logic; --! Negative enable
41 cnv : OUT STD_LOGIC;
41 smplClk : in STD_LOGIC; --! Sampling clock
42
42 DataReady : out std_logic; --! New sample available
43 -- DATA --
43 smpout : out Samples(ChanelCount-1 downto 0); --! Samples
44 clk : IN STD_LOGIC;
44 AD_in : in AD7688_in(ChanelCount-1 downto 0); --! Input signals for ADC see lpp.lpp_ad_conv
45 rstn : IN STD_LOGIC;
45 AD_out : out AD7688_out --! Output signals for ADC see lpp.lpp_ad_conv
46 sck : OUT STD_LOGIC;
46 );
47 sdo : IN STD_LOGIC_VECTOR(ChanelCount-1 DOWNTO 0);
47 end AD7688_drvr;
48
48
49 sample : OUT Samples(ChanelCount-1 DOWNTO 0);
49 architecture ar_AD7688_drvr of AD7688_drvr is
50 sample_val : OUT STD_LOGIC
50
51 );
51 constant convTrigger : integer:= clkkHz*16/10000; --tconv = 1.6µs
52 END AD7688_drvr;
52
53
53 signal i : integer range 0 to convTrigger :=0;
54 ARCHITECTURE ar_AD7688_drvr OF AD7688_drvr IS
54 signal clk_int : std_logic;
55
55 signal clk_int_inv : std_logic;
56 COMPONENT SYNC_FF
56 signal smplClk_reg : std_logic;
57 GENERIC (
57 signal cnv_int : std_logic;
58 NB_FF_OF_SYNC : INTEGER);
58 signal reset : std_logic;
59 PORT (
59
60 clk : IN STD_LOGIC;
60 begin
61 rstn : IN STD_LOGIC;
61
62 A : IN STD_LOGIC;
62 clkdiv: if clkkHz>=66000 generate
63 A_sync : OUT STD_LOGIC);
63 clkdivider: entity work.Clk_divider
64 END COMPONENT;
64 generic map(clkkHz*1000,60000000)
65
65 Port map( clk ,reset,clk_int);
66
66 end generate;
67 SIGNAL cnv_cycle_counter : INTEGER;
67
68 SIGNAL cnv_s : STD_LOGIC;
68 clknodiv: if clkkHz<66000 generate
69 SIGNAL cnv_sync : STD_LOGIC;
69 nodiv: clk_int <= clk;
70 SIGNAL cnv_sync_r : STD_LOGIC;
70 end generate;
71 SIGNAL cnv_done : STD_LOGIC;
71
72 SIGNAL sample_bit_counter : INTEGER;
72 clk_int_inv <= not clk_int;
73 SIGNAL shift_reg : Samples(ChanelCount-1 DOWNTO 0);
73
74
74 AD_out.CNV <= cnv_int;
75 SIGNAL cnv_run_sync : STD_LOGIC;
75 AD_out.SCK <= clk_int;
76
76 reset <= rstn and enable;
77 BEGIN
77
78 -----------------------------------------------------------------------------
78 sckgen: process(clk,reset)
79 -- CONV
79 begin
80 -----------------------------------------------------------------------------
80 if reset = '0' then
81 PROCESS (cnv_clk, cnv_rstn)
81 i <= 0;
82 BEGIN -- PROCESS
82 cnv_int <= '0';
83 IF cnv_rstn = '0' THEN -- asynchronous reset (active low)
83 smplClk_reg <= '0';
84 cnv_cycle_counter <= 0;
84 elsif clk'event and clk = '1' then
85 cnv_s <= '0';
85 if smplClk = '1' and smplClk_reg = '0' then
86 ELSIF cnv_clk'EVENT AND cnv_clk = '1' THEN -- rising clock edge
86 if i = convTrigger then
87 IF cnv_run = '1' THEN
87 smplClk_reg <= '1';
88 IF cnv_cycle_counter < ncycle_cnv THEN
88 i <= 0;
89 cnv_cycle_counter <= cnv_cycle_counter +1;
89 cnv_int <= '0';
90 IF cnv_cycle_counter < ncycle_cnv_high THEN
90 else
91 cnv_s <= '1';
91 i <= i+1;
92 ELSE
92 cnv_int <= '1';
93 cnv_s <= '0';
93 end if;
94 END IF;
94 elsif smplClk = '0' and smplClk_reg = '1' then
95 ELSE
95 smplClk_reg <= '0';
96 cnv_s <= '1';
96 end if;
97 cnv_cycle_counter <= 0;
97 end if;
98 END IF;
98 end process;
99 ELSE
99
100 cnv_s <= '0';
100
101 cnv_cycle_counter <= 0;
101
102 END IF;
102 spidrvr: entity work.AD7688_spi_if
103 END IF;
103 generic map(ChanelCount)
104 END PROCESS;
104 Port map(clk_int_inv,reset,cnv_int,DataReady,AD_in,smpout);
105
105
106 cnv <= cnv_s;
106
107
107
108 -----------------------------------------------------------------------------
108 end ar_AD7688_drvr;
109
109
110
110
111 -----------------------------------------------------------------------------
111
112 -- SYNC CNV
112
113 -----------------------------------------------------------------------------
113
114
114
115 SYNC_FF_cnv : SYNC_FF
116 GENERIC MAP (
117 NB_FF_OF_SYNC => 2)
118 PORT MAP (
119 clk => clk,
120 rstn => rstn,
121 A => cnv_s,
122 A_sync => cnv_sync);
123
124 PROCESS (clk, rstn)
125 BEGIN
126 IF rstn = '0' THEN
127 cnv_sync_r <= '0';
128 cnv_done <= '0';
129 ELSIF clk'EVENT AND clk = '1' THEN
130 cnv_sync_r <= cnv_sync;
131 cnv_done <= (NOT cnv_sync) AND cnv_sync_r;
132 END IF;
133 END PROCESS;
134
135 -----------------------------------------------------------------------------
136
137 SYNC_FF_run : SYNC_FF
138 GENERIC MAP (
139 NB_FF_OF_SYNC => 2)
140 PORT MAP (
141 clk => clk,
142 rstn => rstn,
143 A => cnv_run,
144 A_sync => cnv_run_sync);
145
146
147
148 -----------------------------------------------------------------------------
149 -- DATA
150 -----------------------------------------------------------------------------
151 PROCESS (clk, rstn)
152 BEGIN -- PROCESS
153 IF rstn = '0' THEN
154 FOR l IN 0 TO ChanelCount-1 LOOP
155 shift_reg(l) <= (OTHERS => '0');
156 sample(l)(15 DOWNTO 0) <= (OTHERS => '0');
157 END LOOP;
158 sample_bit_counter <= 0;
159 sample_val <= '0';
160 SCK <= '1';
161
162 ELSIF clk'EVENT AND clk = '1' THEN
163
164 IF cnv_run_sync = '0' THEN
165 sample_bit_counter <= 0;
166 ELSIF cnv_done = '1' THEN
167 sample_bit_counter <= 1;
168 ELSIF sample_bit_counter > 0 AND sample_bit_counter < 32 THEN
169 sample_bit_counter <= sample_bit_counter + 1;
170 END IF;
171
172 IF (sample_bit_counter MOD 2) = 1 THEN
173 FOR l IN 0 TO ChanelCount-1 LOOP
174 --shift_reg(l)(15) <= sdo(l);
175 --shift_reg(l)(14 DOWNTO 0) <= shift_reg(l)(15 DOWNTO 1);
176 shift_reg(l)(0) <= sdo(l);
177 shift_reg(l)(14 DOWNTO 1) <= shift_reg(l)(13 DOWNTO 0);
178 END LOOP;
179 SCK <= '0';
180 ELSE
181 SCK <= '1';
182 END IF;
183
184 IF sample_bit_counter = 31 THEN
185 sample_val <= '1';
186 FOR l IN 0 TO ChanelCount-1 LOOP
187 --sample(l)(15) <= sdo(l);
188 --sample(l)(14 DOWNTO 0) <= shift_reg(l)(15 DOWNTO 1);
189 sample(l)(0) <= sdo(l);
190 sample(l)(15 DOWNTO 1) <= shift_reg(l)(14 DOWNTO 0);
191 END LOOP;
192 ELSE
193 sample_val <= '0';
194 END IF;
195 END IF;
196 END PROCESS;
197
198 END ar_AD7688_drvr;
Show file before | Show file after | Hide comments
@@ -32,13 +32,13 entity AD7688_spi_if is
32 cnv : in STD_LOGIC;
32 cnv : in STD_LOGIC;
33 DataReady : out std_logic;
33 DataReady : out std_logic;
34 sdi : in AD7688_in(ChanelCount-1 downto 0);
34 sdi : in AD7688_in(ChanelCount-1 downto 0);
35 smpout : out Samples_out(ChanelCount-1 downto 0)
35 smpout : out Samples(ChanelCount-1 downto 0)
36 );
36 );
37 end AD7688_spi_if;
37 end AD7688_spi_if;
38
38
39 architecture ar_AD7688_spi_if of AD7688_spi_if is
39 architecture ar_AD7688_spi_if of AD7688_spi_if is
40
40
41 signal shift_reg : Samples_out(ChanelCount-1 downto 0);
41 signal shift_reg : Samples(ChanelCount-1 downto 0);
42 signal i : integer range 0 to 16 :=0;
42 signal i : integer range 0 to 16 :=0;
43 signal cnv_reg : std_logic := '0';
43 signal cnv_reg : std_logic := '0';
44
44
Show file before | Show file after | Hide comments
@@ -10,13 +10,17 use lpp.general_purpose.all;
10
10
11
11
12
12
13 entity DUAL_ADS1278_DRIVER is
13 entity DUAL_ADS1278_DRIVER is
14 generic
15 (
16 SCLKDIV : integer range 2 to 256 :=16
17 );
14 port(
18 port(
15 Clk : in std_logic;
19 Clk : in std_logic;
16 reset : in std_logic;
20 reset : in std_logic;
17 SpiClk : out std_logic;
21 SpiClk : out std_logic;
18 DIN : in std_logic_vector(1 downto 0);
22 DIN : in std_logic_vector(1 downto 0);
19 SmplClk : in std_logic;
23 SmplClk : in std_logic;
20 OUT00 : out std_logic_vector(23 downto 0);
24 OUT00 : out std_logic_vector(23 downto 0);
21 OUT01 : out std_logic_vector(23 downto 0);
25 OUT01 : out std_logic_vector(23 downto 0);
22 OUT02 : out std_logic_vector(23 downto 0);
26 OUT02 : out std_logic_vector(23 downto 0);
@@ -33,7 +37,7 port(
33 OUT15 : out std_logic_vector(23 downto 0);
37 OUT15 : out std_logic_vector(23 downto 0);
34 OUT16 : out std_logic_vector(23 downto 0);
38 OUT16 : out std_logic_vector(23 downto 0);
35 OUT17 : out std_logic_vector(23 downto 0);
39 OUT17 : out std_logic_vector(23 downto 0);
36 FSynch : out std_logic
40 FSynch : out std_logic
37 );
41 );
38 end DUAL_ADS1278_DRIVER;
42 end DUAL_ADS1278_DRIVER;
39
43
@@ -43,10 +47,9 end DUAL_ADS1278_DRIVER;
43
47
44
48
45 architecture ar_DUAL_ADS1278_DRIVER of DUAL_ADS1278_DRIVER is
49 architecture ar_DUAL_ADS1278_DRIVER of DUAL_ADS1278_DRIVER is
46
50 signal ShiftGeg0,ShiftGeg1 : std_logic_vector((8*24)-1 downto 0);
47 signal Vec00,Vec01,Vec02,Vec03,Vec04,Vec05,Vec06,Vec07,Vec10,Vec11,Vec12,Vec13,Vec14,Vec15,Vec16,Vec17 : std_logic_vector(23 downto 0);
48 signal SmplClk_Reg : std_logic:= '0';
51 signal SmplClk_Reg : std_logic:= '0';
49 signal N : integer range 0 to 23*8 := 0;
52 signal N : integer range 0 to (24*8) := 0;
50 signal SPI_CLk : std_logic;
53 signal SPI_CLk : std_logic;
51 signal SmplClk_clkd : std_logic:= '0';
54 signal SmplClk_clkd : std_logic:= '0';
52
55
@@ -54,97 +57,24 begin
54
57
55
58
56 CLKDIV0 : Clk_Divider2
59 CLKDIV0 : Clk_Divider2
57 generic map(16)
60 generic map(SCLKDIV)
58 port map(Clk,SPI_CLk);
61 port map(Clk,SPI_CLk);
59
62
60
63 SpiClk <= not SPI_CLk;
61 FSynch <= SmplClk_clkd;
62 SpiClk <= SPI_CLk;
63
64
64 process(reset,SPI_CLk)
65 process(reset,SPI_CLk)
65 begin
66 begin
66
67
67 if reset = '0' then
68 if reset = '0' then
68 Vec00 <= (others => '0');
69 ShiftGeg0 <= (others => '0');
69 Vec01 <= (others => '0');
70 ShiftGeg1 <= (others => '0');
70 Vec02 <= (others => '0');
71 N <= 0;
71 Vec03 <= (others => '0');
72 Vec04 <= (others => '0');
73 Vec05 <= (others => '0');
74 Vec06 <= (others => '0');
75 Vec07 <= (others => '0');
76
77 Vec10 <= (others => '0');
78 Vec11 <= (others => '0');
79 Vec12 <= (others => '0');
80 Vec13 <= (others => '0');
81 Vec14 <= (others => '0');
82 Vec15 <= (others => '0');
83 Vec16 <= (others => '0');
84 Vec17 <= (others => '0');
85 N <= 0;
86 elsif SPI_CLk'event and SPI_CLk = '1' then
72 elsif SPI_CLk'event and SPI_CLk = '1' then
87 -- SmplClk_clkd <= SmplClk;
73 FSynch <= SmplClk;
88 -- SmplClk_Reg <= SmplClk_clkd;
74 if ((SmplClk_clkd = '1' and SmplClk_Reg = '0') or (N /= 0)) then
89 --if ((SmplClk_clkd = '1' and SmplClk_Reg = '0') or (N /= 0)) then
75 ShiftGeg0((8*24)-1 downto 0) <= ShiftGeg0((8*24)-2 downto 0) & DIN(0);
90 if ((SmplClk_clkd = '1' and SmplClk_Reg = '0') or (N /= 0)) then
76 ShiftGeg1((8*24)-1 downto 0) <= ShiftGeg1((8*24)-2 downto 0) & DIN(1);
91 --Vec0(0) <= DIN(0);
77 if N = ((24*8)-1) then
92 --Vec1(0) <= DIN(1);
93 --Vec2(0) <= DIN(2);
94 --Vec3(0) <= DIN(3);
95 --Vec0(23 downto 1) <= Vec0(22 downto 0);
96 --Vec1(23 downto 1) <= Vec1(22 downto 0);
97 --Vec2(23 downto 1) <= Vec2(22 downto 0);
98 --Vec3(23 downto 1) <= Vec3(22 downto 0);
99 Vec00(0) <= DIN(0);
100 Vec00(23 downto 1) <= Vec00(22 downto 0);
101 Vec01(0) <= Vec00(23);
102
103 Vec01(23 downto 1) <= Vec01(22 downto 0);
104 Vec02(0) <= Vec01(23);
105
106 Vec02(23 downto 1) <= Vec02(22 downto 0);
107 Vec03(0) <= Vec02(23);
108
109 Vec03(23 downto 1) <= Vec03(22 downto 0);
110 Vec04(0) <= Vec03(23);
111
112 Vec04(23 downto 1) <= Vec04(22 downto 0);
113 Vec05(0) <= Vec04(23);
114
115 Vec05(23 downto 1) <= Vec05(22 downto 0);
116 Vec06(0) <= Vec05(23);
117
118 Vec06(23 downto 1) <= Vec06(22 downto 0);
119 Vec07(0) <= Vec06(23);
120
121 Vec07(23 downto 1) <= Vec07(22 downto 0);
122
123
124 Vec10(0) <= DIN(1);
125 Vec10(23 downto 1) <= Vec10(22 downto 0);
126 Vec11(0) <= Vec10(23);
127
128 Vec11(23 downto 1) <= Vec11(22 downto 0);
129 Vec12(0) <= Vec11(23);
130
131 Vec12(23 downto 1) <= Vec12(22 downto 0);
132 Vec13(0) <= Vec12(23);
133
134 Vec13(23 downto 1) <= Vec13(22 downto 0);
135 Vec14(0) <= Vec13(23);
136
137 Vec14(23 downto 1) <= Vec14(22 downto 0);
138 Vec15(0) <= Vec14(23);
139
140 Vec15(23 downto 1) <= Vec15(22 downto 0);
141 Vec16(0) <= Vec15(23);
142
143 Vec16(23 downto 1) <= Vec16(22 downto 0);
144 Vec17(0) <= Vec16(23);
145
146 Vec17(23 downto 1) <= Vec17(22 downto 0);
147 if N = (23*8) then
148 N <= 0;
78 N <= 0;
149 else
79 else
150 N <= N+1;
80 N <= N+1;
@@ -163,27 +93,45 begin
163 end process;
93 end process;
164
94
165
95
166 process(SPI_CLk)
96 process(clk,reset)
167 begin
97 begin
168 if SPI_CLk'event and SPI_CLk ='1' then
98 if reset = '0' then
99 OUT00 <= (others => '0');
100 OUT01 <= (others => '0');
101 OUT02 <= (others => '0');
102 OUT03 <= (others => '0');
103 OUT04 <= (others => '0');
104 OUT05 <= (others => '0');
105 OUT06 <= (others => '0');
106 OUT07 <= (others => '0');
107
108 OUT10 <= (others => '0');
109 OUT11 <= (others => '0');
110 OUT12 <= (others => '0');
111 OUT13 <= (others => '0');
112 OUT14 <= (others => '0');
113 OUT15 <= (others => '0');
114 OUT16 <= (others => '0');
115 OUT17 <= (others => '0');
116 elsif clk'event and clk ='1' then
169 if N = 0 then
117 if N = 0 then
170 OUT00 <= Vec00;
118 OUT00 <= ShiftGeg0((24*1)-1 downto (24*(1-1)));
171 OUT01 <= Vec01;
119 OUT01 <= ShiftGeg0((24*2)-1 downto (24*(2-1)));
172 OUT02 <= Vec02;
120 OUT02 <= ShiftGeg0((24*3)-1 downto (24*(3-1)));
173 OUT03 <= Vec03;
121 OUT03 <= ShiftGeg0((24*4)-1 downto (24*(4-1)));
174 OUT04 <= Vec04;
122 OUT04 <= ShiftGeg0((24*5)-1 downto (24*(5-1)));
175 OUT05 <= Vec05;
123 OUT05 <= ShiftGeg0((24*6)-1 downto (24*(6-1)));
176 OUT06 <= Vec06;
124 OUT06 <= ShiftGeg0((24*7)-1 downto (24*(7-1)));
177 OUT07 <= Vec07;
125 OUT07 <= ShiftGeg0((24*8)-1 downto (24*(8-1)));
178
126
179 OUT10 <= Vec10;
127 OUT10 <= ShiftGeg1((24*1)-1 downto (24*(1-1)));
180 OUT11 <= Vec11;
128 OUT11 <= ShiftGeg1((24*2)-1 downto (24*(2-1)));
181 OUT12 <= Vec12;
129 OUT12 <= ShiftGeg1((24*3)-1 downto (24*(3-1)));
182 OUT13 <= Vec13;
130 OUT13 <= ShiftGeg1((24*4)-1 downto (24*(4-1)));
183 OUT14 <= Vec14;
131 OUT14 <= ShiftGeg1((24*5)-1 downto (24*(5-1)));
184 OUT15 <= Vec15;
132 OUT15 <= ShiftGeg1((24*6)-1 downto (24*(6-1)));
185 OUT16 <= Vec16;
133 OUT16 <= ShiftGeg1((24*7)-1 downto (24*(7-1)));
186 OUT17 <= Vec17;
134 OUT17 <= ShiftGeg1((24*8)-1 downto (24*(8-1)));
187 end if;
135 end if;
188 end if;
136 end if;
189 end process;
137 end process;
Show file before | Show file after | Hide comments
@@ -35,46 +35,22 PACKAGE lpp_ad_conv IS
35 --CONSTANT ADS7886 : INTEGER := 1;
35 --CONSTANT ADS7886 : INTEGER := 1;
36
36
37
37
38 --TYPE AD7688_out IS
38 TYPE AD7688_out IS
39 --RECORD
39 RECORD
40 -- CNV : STD_LOGIC;
40 CNV : STD_LOGIC;
41 -- SCK : STD_LOGIC;
41 SCK : STD_LOGIC;
42 --END RECORD;
42 END RECORD;
43
43
44 --TYPE AD7688_in_element IS
44 TYPE AD7688_in_element IS
45 --RECORD
45 RECORD
46 -- SDI : STD_LOGIC;
46 SDI : STD_LOGIC;
47 --END RECORD;
47 END RECORD;
48
48
49 --TYPE AD7688_in IS ARRAY(NATURAL RANGE <>) OF AD7688_in_element;
49 TYPE AD7688_in IS ARRAY(NATURAL RANGE <>) OF AD7688_in_element;
50
50
51 TYPE Samples IS ARRAY(NATURAL RANGE <>) OF STD_LOGIC_VECTOR(15 DOWNTO 0);
51 TYPE Samples IS ARRAY(NATURAL RANGE <>) OF STD_LOGIC_VECTOR(15 DOWNTO 0);
52
52
53 SUBTYPE Samples24 IS STD_LOGIC_VECTOR(23 DOWNTO 0);
53 COMPONENT ADS7886_drvr
54
55 SUBTYPE Samples16 IS STD_LOGIC_VECTOR(15 DOWNTO 0);
56
57 SUBTYPE Samples14 IS STD_LOGIC_VECTOR(13 DOWNTO 0);
58
59 SUBTYPE Samples12 IS STD_LOGIC_VECTOR(11 DOWNTO 0);
60
61 SUBTYPE Samples10 IS STD_LOGIC_VECTOR(9 DOWNTO 0);
62
63 SUBTYPE Samples8 IS STD_LOGIC_VECTOR(7 DOWNTO 0);
64
65 TYPE Samples24v IS ARRAY(NATURAL RANGE <>) OF Samples24;
66
67 TYPE Samples16v IS ARRAY(NATURAL RANGE <>) OF Samples16;
68
69 TYPE Samples14v IS ARRAY(NATURAL RANGE <>) OF Samples14;
70
71 TYPE Samples12v IS ARRAY(NATURAL RANGE <>) OF Samples12;
72
73 TYPE Samples10v IS ARRAY(NATURAL RANGE <>) OF Samples10;
74
75 TYPE Samples8v IS ARRAY(NATURAL RANGE <>) OF Samples8;
76
77 COMPONENT AD7688_drvr
78 GENERIC (
54 GENERIC (
79 ChanelCount : INTEGER;
55 ChanelCount : INTEGER;
80 ncycle_cnv_high : INTEGER := 79;
56 ncycle_cnv_high : INTEGER := 79;
@@ -82,7 +58,7 PACKAGE lpp_ad_conv IS
82 PORT (
58 PORT (
83 cnv_clk : IN STD_LOGIC;
59 cnv_clk : IN STD_LOGIC;
84 cnv_rstn : IN STD_LOGIC;
60 cnv_rstn : IN STD_LOGIC;
85 cnv_run : IN STD_LOGIC;
61 cnv_run : IN STD_LOGIC;
86 cnv : OUT STD_LOGIC;
62 cnv : OUT STD_LOGIC;
87 clk : IN STD_LOGIC;
63 clk : IN STD_LOGIC;
88 rstn : IN STD_LOGIC;
64 rstn : IN STD_LOGIC;
@@ -91,92 +67,32 PACKAGE lpp_ad_conv IS
91 sample : OUT Samples(ChanelCount-1 DOWNTO 0);
67 sample : OUT Samples(ChanelCount-1 DOWNTO 0);
92 sample_val : OUT STD_LOGIC);
68 sample_val : OUT STD_LOGIC);
93 END COMPONENT;
69 END COMPONENT;
94
70
95 COMPONENT RHF1401_drvr IS
71 COMPONENT AD7688_drvr IS
96 GENERIC(
72 GENERIC(ChanelCount : INTEGER;
97 ChanelCount : INTEGER := 8);
73 clkkHz : INTEGER);
98 PORT (
74 PORT (clk : IN STD_LOGIC;
99 cnv_clk : IN STD_LOGIC;
75 rstn : IN STD_LOGIC;
100 clk : IN STD_LOGIC;
76 enable : IN STD_LOGIC;
101 rstn : IN STD_LOGIC;
77 smplClk : IN STD_LOGIC;
102 ADC_data : IN Samples14;
78 DataReady : OUT STD_LOGIC;
103 --ADC_smpclk : OUT STD_LOGIC;
79 smpout : OUT Samples(ChanelCount-1 DOWNTO 0);
104 ADC_nOE : OUT STD_LOGIC_VECTOR(ChanelCount-1 DOWNTO 0);
80 AD_in : IN AD7688_in(ChanelCount-1 DOWNTO 0);
105 sample : OUT Samples14v(ChanelCount-1 DOWNTO 0);
81 AD_out : OUT AD7688_out);
106 sample_val : OUT STD_LOGIC
107 );
108 END COMPONENT;
109
110 COMPONENT top_ad_conv_RHF1401
111 GENERIC (
112 ChanelCount : INTEGER;
113 ncycle_cnv_high : INTEGER := 79;
114 ncycle_cnv : INTEGER := 500);
115 PORT (
116 cnv_clk : IN STD_LOGIC;
117 cnv_rstn : IN STD_LOGIC;
118 cnv : OUT STD_LOGIC;
119 clk : IN STD_LOGIC;
120 rstn : IN STD_LOGIC;
121 ADC_data : IN Samples14;
122 ADC_nOE : OUT STD_LOGIC_VECTOR(ChanelCount-1 DOWNTO 0);
123 sample : OUT Samples14v(ChanelCount-1 DOWNTO 0);
124 sample_val : OUT STD_LOGIC);
125 END COMPONENT;
82 END COMPONENT;
126
83
127
84
128 COMPONENT AD7688_drvr_sync
85 COMPONENT AD7688_spi_if IS
129 GENERIC (
86 GENERIC(ChanelCount : INTEGER);
130 ChanelCount : INTEGER;
87 PORT(clk : IN STD_LOGIC;
131 ncycle_cnv_high : INTEGER;
88 reset : IN STD_LOGIC;
132 ncycle_cnv : INTEGER);
89 cnv : IN STD_LOGIC;
133 PORT (
90 DataReady : OUT STD_LOGIC;
134 cnv_clk : IN STD_LOGIC;
91 sdi : IN AD7688_in(ChanelCount-1 DOWNTO 0);
135 cnv_rstn : IN STD_LOGIC;
92 smpout : OUT Samples(ChanelCount-1 DOWNTO 0)
136 cnv_run : IN STD_LOGIC;
93 );
137 cnv : OUT STD_LOGIC;
138 sck : OUT STD_LOGIC;
139 sdo : IN STD_LOGIC_VECTOR(ChanelCount-1 DOWNTO 0);
140 sample : OUT Samples(ChanelCount-1 DOWNTO 0);
141 sample_val : OUT STD_LOGIC);
142 END COMPONENT;
143
144 COMPONENT TestModule_RHF1401
145 GENERIC (
146 freq : INTEGER;
147 amplitude : INTEGER;
148 impulsion : INTEGER);
149 PORT (
150 ADC_smpclk : IN STD_LOGIC;
151 ADC_OEB_bar : IN STD_LOGIC;
152 ADC_data : OUT STD_LOGIC_VECTOR(13 DOWNTO 0));
153 END COMPONENT;
94 END COMPONENT;
154
95
155 --COMPONENT AD7688_drvr IS
156 -- GENERIC(ChanelCount : INTEGER;
157 -- clkkHz : INTEGER);
158 -- PORT (clk : IN STD_LOGIC;
159 -- rstn : IN STD_LOGIC;
160 -- enable : IN STD_LOGIC;
161 -- smplClk : IN STD_LOGIC;
162 -- DataReady : OUT STD_LOGIC;
163 -- smpout : OUT Samples_out(ChanelCount-1 DOWNTO 0);
164 -- AD_in : IN AD7688_in(ChanelCount-1 DOWNTO 0);
165 -- AD_out : OUT AD7688_out);
166 --END COMPONENT;
167
168
169 --COMPONENT AD7688_spi_if IS
170 -- GENERIC(ChanelCount : INTEGER);
171 -- PORT(clk : IN STD_LOGIC;
172 -- reset : IN STD_LOGIC;
173 -- cnv : IN STD_LOGIC;
174 -- DataReady : OUT STD_LOGIC;
175 -- sdi : IN AD7688_in(ChanelCount-1 DOWNTO 0);
176 -- smpout : OUT Samples_out(ChanelCount-1 DOWNTO 0)
177 -- );
178 --END COMPONENT;
179
180
96
181 --COMPONENT lpp_apb_ad_conv
97 --COMPONENT lpp_apb_ad_conv
182 -- GENERIC(
98 -- GENERIC(
@@ -229,72 +145,72 PACKAGE lpp_ad_conv IS
229 --======================= ADS 127X =========================|
145 --======================= ADS 127X =========================|
230 --===========================================================|
146 --===========================================================|
231
147
232 TYPE ADS127X_FORMAT_Type IS ARRAY(2 DOWNTO 0) OF STD_LOGIC;
148 Type ADS127X_FORMAT_Type is array(2 downto 0) of std_logic;
233 CONSTANT ADS127X_SPI_FORMAT : ADS127X_FORMAT_Type := "010";
149 constant ADS127X_SPI_FORMAT : ADS127X_FORMAT_Type := "010";
234 CONSTANT ADS127X_FSYNC_FORMAT : ADS127X_FORMAT_Type := "101";
150 constant ADS127X_FSYNC_FORMAT : ADS127X_FORMAT_Type := "101";
235
151
236 TYPE ADS127X_MODE_Type IS ARRAY(1 DOWNTO 0) OF STD_LOGIC;
152 Type ADS127X_MODE_Type is array(1 downto 0) of std_logic;
237 CONSTANT ADS127X_MODE_low_power : ADS127X_MODE_Type := "10";
153 constant ADS127X_MODE_low_power : ADS127X_MODE_Type := "10";
238 CONSTANT ADS127X_MODE_low_speed : ADS127X_MODE_Type := "11";
154 constant ADS127X_MODE_low_speed : ADS127X_MODE_Type := "11";
239 CONSTANT ADS127X_MODE_high_resolution : ADS127X_MODE_Type := "01";
155 constant ADS127X_MODE_high_resolution : ADS127X_MODE_Type := "01";
240
156
241 TYPE ADS127X_config IS
157 Type ADS127X_config is
242 RECORD
158 record
243 SYNC : STD_LOGIC;
159 SYNC : std_logic;
244 CLKDIV : STD_LOGIC;
160 CLKDIV : std_logic;
245 FORMAT : ADS127X_FORMAT_Type;
161 FORMAT : ADS127X_FORMAT_Type;
246 MODE : ADS127X_MODE_Type;
162 MODE : ADS127X_MODE_Type;
247 END RECORD;
163 end record;
248
164
249 COMPONENT ADS1274_DRIVER IS
165 COMPONENT ADS1274_DRIVER is
250 GENERIC(modeCfg : ADS127X_MODE_Type := ADS127X_MODE_low_power; formatCfg : ADS127X_FORMAT_Type := ADS127X_FSYNC_FORMAT);
166 generic(modeCfg : ADS127X_MODE_Type := ADS127X_MODE_low_power; formatCfg : ADS127X_FORMAT_Type := ADS127X_FSYNC_FORMAT);
251 PORT(
167 port(
252 Clk : IN STD_LOGIC;
168 Clk : in std_logic;
253 reset : IN STD_LOGIC;
169 reset : in std_logic;
254 SpiClk : OUT STD_LOGIC;
170 SpiClk : out std_logic;
255 DIN : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
171 DIN : in std_logic_vector(3 downto 0);
256 Ready : IN STD_LOGIC;
172 Ready : in std_logic;
257 Format : OUT STD_LOGIC_VECTOR(2 DOWNTO 0);
173 Format : out std_logic_vector(2 downto 0);
258 Mode : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
174 Mode : out std_logic_vector(1 downto 0);
259 ClkDiv : OUT STD_LOGIC;
175 ClkDiv : out std_logic;
260 PWDOWN : OUT STD_LOGIC_VECTOR(3 DOWNTO 0);
176 PWDOWN : out std_logic_vector(3 downto 0);
261 SmplClk : IN STD_LOGIC;
177 SmplClk : in std_logic;
262 OUT0 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
178 OUT0 : out std_logic_vector(23 downto 0);
263 OUT1 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
179 OUT1 : out std_logic_vector(23 downto 0);
264 OUT2 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
180 OUT2 : out std_logic_vector(23 downto 0);
265 OUT3 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
181 OUT3 : out std_logic_vector(23 downto 0);
266 FSynch : OUT STD_LOGIC;
182 FSynch : out std_logic;
267 test : OUT STD_LOGIC
183 test : out std_logic
268 );
184 );
269 END COMPONENT;
185 end COMPONENT;
270
186
271 -- todo clean file
187 -- todo clean file
272 COMPONENT DUAL_ADS1278_DRIVER IS
188 COMPONENT DUAL_ADS1278_DRIVER is
273 PORT(
189 port(
274 Clk : IN STD_LOGIC;
190 Clk : in std_logic;
275 reset : IN STD_LOGIC;
191 reset : in std_logic;
276 SpiClk : OUT STD_LOGIC;
192 SpiClk : out std_logic;
277 DIN : IN STD_LOGIC_VECTOR(1 DOWNTO 0);
193 DIN : in std_logic_vector(1 downto 0);
278 SmplClk : IN STD_LOGIC;
194 SmplClk : in std_logic;
279 OUT00 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
195 OUT00 : out std_logic_vector(23 downto 0);
280 OUT01 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
196 OUT01 : out std_logic_vector(23 downto 0);
281 OUT02 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
197 OUT02 : out std_logic_vector(23 downto 0);
282 OUT03 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
198 OUT03 : out std_logic_vector(23 downto 0);
283 OUT04 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
199 OUT04 : out std_logic_vector(23 downto 0);
284 OUT05 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
200 OUT05 : out std_logic_vector(23 downto 0);
285 OUT06 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
201 OUT06 : out std_logic_vector(23 downto 0);
286 OUT07 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
202 OUT07 : out std_logic_vector(23 downto 0);
287 OUT10 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
203 OUT10 : out std_logic_vector(23 downto 0);
288 OUT11 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
204 OUT11 : out std_logic_vector(23 downto 0);
289 OUT12 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
205 OUT12 : out std_logic_vector(23 downto 0);
290 OUT13 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
206 OUT13 : out std_logic_vector(23 downto 0);
291 OUT14 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
207 OUT14 : out std_logic_vector(23 downto 0);
292 OUT15 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
208 OUT15 : out std_logic_vector(23 downto 0);
293 OUT16 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
209 OUT16 : out std_logic_vector(23 downto 0);
294 OUT17 : OUT STD_LOGIC_VECTOR(23 DOWNTO 0);
210 OUT17 : out std_logic_vector(23 downto 0);
295 FSynch : OUT STD_LOGIC
211 FSynch : out std_logic
296 );
212 );
297 END COMPONENT;
213 end COMPONENT;
298
214
299
215
300 END lpp_ad_conv;
216 END lpp_ad_conv;
Show file before | Show file after | Hide comments
@@ -1,13 +1,19
1 AD7688_drvr_sync.vhd
1 AD7688_drvr.vhd
2 AD7688_drvr.vhd
2 AD7688_drvr_sync.vhd
3 AD7688_drvr.vhd.orig
3 AD7688_spi_if.vhd
4 AD7688_spi_if.vhd
4 ADS1274_drvr.vhd
5 ADS1274_drvr.vhd
6 ADS1274_drvr.vhd~
5 ADS1278_drvr.vhd
7 ADS1278_drvr.vhd
8 ADS1278_drvr.vhd~
6 ADS7886_drvr.vhd
9 ADS7886_drvr.vhd
7 RHF1401.vhd
8 WriteGen_ADC.vhd
9 dual_ADS1278_drvr.vhd
10 dual_ADS1278_drvr.vhd
11 dual_ADS1278_drvr.vhd~
10 lpp_ad_Conv.vhd
12 lpp_ad_Conv.vhd
13 lpp_ad_Conv.vhd~
14 lpp_ad_Conv.vhd.orig
11 lpp_apb_ad_conv.vhd
15 lpp_apb_ad_conv.vhd
16 RHF1401.vhd
17 top_ad_conv_RHF1401.vhd
12 top_ad_conv.vhd
18 top_ad_conv.vhd
13 top_ad_conv_RHF1401.vhd
19 WriteGen_ADC.vhd
Show file before | Show file after | Hide comments
@@ -1,4 +1,4
1 apb_devices_list.vhd
1 APB_MULTI_DIODE.vhd
2 APB_MULTI_DIODE.vhd
2 APB_SIMPLE_DIODE.vhd
3 APB_SIMPLE_DIODE.vhd
3 apb_devices_list.vhd
4 lpp_amba.vhd
4 lpp_amba.vhd
Show file before | Show file after | Hide comments
@@ -1,3 +1,3
1 bootrom.vhd
1 bootrom.vhd
2 lpp_bootloader_pkg.vhd
2 lpp_bootloader.vhd
3 lpp_bootloader.vhd
3 lpp_bootloader_pkg.vhd
Show file before | Show file after | Hide comments
@@ -1,8 +1,8
1 fifo_latency_correction.vhd
1 fifo_latency_correction.vhd
2 lpp_dma.vhd
3 lpp_dma_apbreg.vhd
2 lpp_dma_apbreg.vhd
4 lpp_dma_fsm.vhd
3 lpp_dma_fsm.vhd
5 lpp_dma_ip.vhd
4 lpp_dma_ip.vhd
6 lpp_dma_pkg.vhd
5 lpp_dma_pkg.vhd
7 lpp_dma_send_16word.vhd
6 lpp_dma_send_16word.vhd
8 lpp_dma_send_1word.vhd
7 lpp_dma_send_1word.vhd
8 lpp_dma.vhd
Show file before | Show file after | Hide comments
@@ -4,6 +4,7 APB_Matrix.vhd
4 Dispatch.vhd
4 Dispatch.vhd
5 DriveInputs.vhd
5 DriveInputs.vhd
6 GetResult.vhd
6 GetResult.vhd
7 lpp_matrix.vhd
7 MatriceSpectrale.vhd
8 MatriceSpectrale.vhd
8 MatriceSpectrale.vhd.bak
9 MatriceSpectrale.vhd.bak
9 Matrix.vhd
10 Matrix.vhd
@@ -12,6 +13,5 SpectralMatrix.vhd
12 SpectralMatrix.vhd.bak
13 SpectralMatrix.vhd.bak
13 Starter.vhd
14 Starter.vhd
14 TopMatrix_PDR.vhd
15 TopMatrix_PDR.vhd
16 Top_MatrixSpec.vhd
15 TopSpecMatrix.vhd
17 TopSpecMatrix.vhd
16 Top_MatrixSpec.vhd
17 lpp_matrix.vhd
Show file before | Show file after | Hide comments
@@ -2,10 +2,10 APB_FIFO.vhd
2 APB_FIFO.vhd.bak
2 APB_FIFO.vhd.bak
3 FIFO_pipeline.vhd
3 FIFO_pipeline.vhd
4 FillFifo.vhd
4 FillFifo.vhd
5 SSRAM_plugin.vhd
5 lpp_FIFO.vhd
6 SSRAM_plugin_vsim.vhd
7 lppFIFOxN.vhd
6 lppFIFOxN.vhd
8 lppFIFOxN.vhd.bak
7 lppFIFOxN.vhd.bak
9 lpp_FIFO.vhd
10 lpp_memory.vhd
8 lpp_memory.vhd
11 lpp_memory.vhd.bak
9 lpp_memory.vhd.bak
10 SSRAM_plugin.vhd
11 SSRAM_plugin_vsim.vhd
Show file before | Show file after | Hide comments
@@ -1,15 +1,15
1 lpp_lfr.vhd
2 lpp_lfr_apbreg.vhd
1 lpp_lfr_apbreg.vhd
3 lpp_lfr_filter.vhd
2 lpp_lfr_filter.vhd
4 lpp_lfr_ms.vhd
3 lpp_lfr_ms.vhd
5 lpp_lfr_pkg.vhd
4 lpp_lfr_pkg.vhd
5 lpp_lfr.vhd
6 lpp_top_acq.vhd
6 lpp_top_acq.vhd
7 lpp_top_acq.vhd.bak
7 lpp_top_acq.vhd.bak
8 lpp_top_apbreg.vhd
8 lpp_top_apbreg.vhd
9 lpp_top_lfr.vhd
10 lpp_top_lfr_pkg.vhd
9 lpp_top_lfr_pkg.vhd
11 lpp_top_lfr_pkg.vhd.bak
10 lpp_top_lfr_pkg.vhd.bak
12 lpp_top_lfr_wf_picker.vhd
11 lpp_top_lfr.vhd
13 lpp_top_lfr_wf_picker_ip.vhd
12 lpp_top_lfr_wf_picker_ip.vhd
14 lpp_top_lfr_wf_picker_ip_whitout_filter.vhd
13 lpp_top_lfr_wf_picker_ip_whitout_filter.vhd
14 lpp_top_lfr_wf_picker.vhd
15 top_wf_picker.vhd
15 top_wf_picker.vhd
Show file before | Show file after | Hide comments
@@ -1,13 +1,13
1 lpp_waveform.vhd
2 lpp_waveform_burst.vhd
1 lpp_waveform_burst.vhd
3 lpp_waveform_dma.vhd
4 lpp_waveform_dma_genvalid.vhd
2 lpp_waveform_dma_genvalid.vhd
5 lpp_waveform_dma_selectaddress.vhd
3 lpp_waveform_dma_selectaddress.vhd
6 lpp_waveform_dma_send_Nword.vhd
4 lpp_waveform_dma_send_Nword.vhd
7 lpp_waveform_fifo.vhd
5 lpp_waveform_dma.vhd
8 lpp_waveform_fifo_arbiter.vhd
6 lpp_waveform_fifo_arbiter.vhd
9 lpp_waveform_fifo_ctrl.vhd
7 lpp_waveform_fifo_ctrl.vhd
8 lpp_waveform_fifo.vhd
10 lpp_waveform_pkg.vhd
9 lpp_waveform_pkg.vhd
10 lpp_waveform_snapshot_controler.vhd
11 lpp_waveform_snapshot.vhd
11 lpp_waveform_snapshot.vhd
12 lpp_waveform_snapshot_controler.vhd
13 lpp_waveform_valid_ack.vhd
12 lpp_waveform_valid_ack.vhd
13 lpp_waveform.vhd
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
Show file before | Show file after | Hide comments
1 NO CONTENT: file was removed
NO CONTENT: file was removed
This diff has been collapsed as it changes many lines, (703 lines changed) Show them Hide them
General Comments 0
You need to be logged in to leave comments. Login now