diff --git a/APB_DEVICES/apb_devices_list.txt b/APB_DEVICES/apb_devices_list.txt
--- a/APB_DEVICES/apb_devices_list.txt
+++ b/APB_DEVICES/apb_devices_list.txt
@@ -1,27 +1,29 @@
-vendor VENDOR_LPP 19
-
-device ROCKET_TM 1
-device otherCore 2
-device LPP_SIMPLE_DIODE 3
-device LPP_MULTI_DIODE 4
-device LPP_LCD_CTRLR 5
-device LPP_UART 6
-device LPP_CNA 7
-device LPP_APB_ADC 8
-device LPP_CHENILLARD 9
-device LPP_IIR_CEL_FILTER 10
-device LPP_FIFO_PID 11
-device LPP_FFT 12
-device LPP_MATRIX 13
-device LPP_DELAY 14
-device LPP_USB 15
-device LPP_BALISE 16
-device LPP_DMA_TYPE 17
-device LPP_BOOTLOADER_TYPE 18
-device LPP_LFR 19
-device LPP_CLKSETTING 20
-device LPP_LFR_HK_DEVICE 21  
-device LPP_LFR_MANAGEMENT 22 
-device LPP_DEBUG_DMA A0
-device LPP_DEBUG_LFR A1   
-device LPP_DEBUG_LFR_ID A2
+vendor VENDOR_LPP 19
+
+device ROCKET_TM 1
+device otherCore 2
+device LPP_SIMPLE_DIODE 3
+device LPP_MULTI_DIODE 4
+device LPP_LCD_CTRLR 5
+device LPP_UART 6
+device LPP_CNA 7
+device LPP_APB_ADC 8
+device LPP_CHENILLARD 9
+device LPP_IIR_CEL_FILTER 10
+device LPP_FIFO_PID 11
+device LPP_FFT 12
+device LPP_MATRIX 13
+device LPP_DELAY 14
+device LPP_USB 15
+device LPP_BALISE 16
+device LPP_DMA_TYPE 17
+device LPP_BOOTLOADER_TYPE 18
+device LPP_LFR 19
+device LPP_CLKSETTING 20
+device LPP_LFR_HK_DEVICE 21  
+device LPP_LFR_MANAGEMENT 22 
+device LPP_DEBUG_DMA A0
+device LPP_DEBUG_LFR A1   
+device LPP_DEBUG_LFR_ID A2
+device APB_ADC_READER F1
+
diff --git a/designs/LFR-EQM-WFP_MS/LFR-EQM.vhd b/designs/LFR-EQM-WFP_MS/LFR-EQM.vhd
--- a/designs/LFR-EQM-WFP_MS/LFR-EQM.vhd
+++ b/designs/LFR-EQM-WFP_MS/LFR-EQM.vhd
@@ -201,8 +201,8 @@ BEGIN  -- beh
   --
   leon3_soc_1 : leon3_soc
     GENERIC MAP (
-      fabtech         => apa3l,
-      memtech         => apa3l,
+      fabtech         => apa3e,
+      memtech         => apa3e,
       padtech         => inferred,
       clktech         => inferred,
       disas           => 0,
diff --git a/designs/LFR-EQM-WFP_MS/Makefile b/designs/LFR-EQM-WFP_MS/Makefile
--- a/designs/LFR-EQM-WFP_MS/Makefile
+++ b/designs/LFR-EQM-WFP_MS/Makefile
@@ -23,7 +23,7 @@ SDC=$(VHDLIB)/boards/$(BOARD)/LFR_EQM_pl
 BITGEN=$(VHDLIB)/boards/$(BOARD)/default.ut
 CLEAN=soft-clean
 
-TECHLIBS = proasic3l
+TECHLIBS = proasic3e
 
 LIBSKIP = core1553bbc core1553brm core1553brt gr1553 corePCIF \
 	tmtc openchip hynix ihp gleichmann micron usbhc
diff --git a/lib/lpp/lpp_amba/apb_devices_list.vhd b/lib/lpp/lpp_amba/apb_devices_list.vhd
--- a/lib/lpp/lpp_amba/apb_devices_list.vhd
+++ b/lib/lpp/lpp_amba/apb_devices_list.vhd
@@ -1,48 +1,49 @@
-
---=================================================================================
---THIS FILE IS GENERATED BY A SCRIPT, DON'T TRY TO EDIT
---
---TAKE A LOOK AT VHD_LIB/APB_DEVICES FOLDER TO ADD A DEVICE ID OR VENDOR ID
---=================================================================================
-
-
-LIBRARY ieee;
-USE ieee.std_logic_1164.ALL;
-LIBRARY grlib;
-USE grlib.amba.ALL;
-USE std.textio.ALL;
-
-
-PACKAGE apb_devices_list IS
-
-
-  CONSTANT VENDOR_LPP : amba_vendor_type := 16#19#;
-
-  CONSTANT ROCKET_TM           : amba_device_type := 16#1#;
-  CONSTANT otherCore           : amba_device_type := 16#2#;
-  CONSTANT LPP_SIMPLE_DIODE    : amba_device_type := 16#3#;
-  CONSTANT LPP_MULTI_DIODE     : amba_device_type := 16#4#;
-  CONSTANT LPP_LCD_CTRLR       : amba_device_type := 16#5#;
-  CONSTANT LPP_UART            : amba_device_type := 16#6#;
-  CONSTANT LPP_CNA             : amba_device_type := 16#7#;
-  CONSTANT LPP_APB_ADC         : amba_device_type := 16#8#;
-  CONSTANT LPP_CHENILLARD      : amba_device_type := 16#9#;
-  CONSTANT LPP_IIR_CEL_FILTER  : amba_device_type := 16#10#;
-  CONSTANT LPP_FIFO_PID        : amba_device_type := 16#11#;
-  CONSTANT LPP_FFT             : amba_device_type := 16#12#;
-  CONSTANT LPP_MATRIX          : amba_device_type := 16#13#;
-  CONSTANT LPP_DELAY           : amba_device_type := 16#14#;
-  CONSTANT LPP_USB             : amba_device_type := 16#15#;
-  CONSTANT LPP_BALISE          : amba_device_type := 16#16#;
-  CONSTANT LPP_DMA_TYPE        : amba_device_type := 16#17#;
-  CONSTANT LPP_BOOTLOADER_TYPE : amba_device_type := 16#18#;
-  CONSTANT LPP_LFR             : amba_device_type := 16#19#;
-  CONSTANT LPP_CLKSETTING      : amba_device_type := 16#20#;
-  CONSTANT LPP_LFR_HK_DEVICE   : amba_device_type := 16#21#;
-  CONSTANT LPP_LFR_MANAGEMENT  : amba_device_type := 16#22#;
-  CONSTANT LPP_DEBUG_DMA       : amba_device_type := 16#A0#;
-  CONSTANT LPP_DEBUG_LFR       : amba_device_type := 16#A1#;
-
-  CONSTANT LPP_DEBUG_LFR_ID    : amba_device_type := 16#A2#;
-  
-END;
+
+--=================================================================================
+--THIS FILE IS GENERATED BY A SCRIPT, DON'T TRY TO EDIT
+--
+--TAKE A LOOK AT VHD_LIB/APB_DEVICES FOLDER TO ADD A DEVICE ID OR VENDOR ID
+--=================================================================================
+
+
+library ieee;
+use ieee.std_logic_1164.all;
+library grlib;
+use grlib.amba.all;
+use std.textio.all;
+
+
+package apb_devices_list is
+
+
+constant VENDOR_LPP   : amba_vendor_type := 16#19#;
+ 
+constant ROCKET_TM   : amba_device_type := 16#1#;
+constant otherCore   : amba_device_type := 16#2#;
+constant LPP_SIMPLE_DIODE   : amba_device_type := 16#3#;
+constant LPP_MULTI_DIODE   : amba_device_type := 16#4#;
+constant LPP_LCD_CTRLR   : amba_device_type := 16#5#;
+constant LPP_UART   : amba_device_type := 16#6#;
+constant LPP_CNA   : amba_device_type := 16#7#;
+constant LPP_APB_ADC   : amba_device_type := 16#8#;
+constant LPP_CHENILLARD   : amba_device_type := 16#9#;
+constant LPP_IIR_CEL_FILTER   : amba_device_type := 16#10#;
+constant LPP_FIFO_PID   : amba_device_type := 16#11#;
+constant LPP_FFT   : amba_device_type := 16#12#;
+constant LPP_MATRIX   : amba_device_type := 16#13#;
+constant LPP_DELAY   : amba_device_type := 16#14#;
+constant LPP_USB   : amba_device_type := 16#15#;
+constant LPP_BALISE   : amba_device_type := 16#16#;
+constant LPP_DMA_TYPE   : amba_device_type := 16#17#;
+constant LPP_BOOTLOADER_TYPE   : amba_device_type := 16#18#;
+constant LPP_LFR   : amba_device_type := 16#19#;
+constant LPP_CLKSETTING   : amba_device_type := 16#20#;
+constant LPP_LFR_HK_DEVICE     : amba_device_type := 16#21#;
+constant LPP_LFR_MANAGEMENT    : amba_device_type := 16#22#;
+constant LPP_DEBUG_DMA   : amba_device_type := 16#A0#;
+constant LPP_DEBUG_LFR      : amba_device_type := 16#A1#;
+constant LPP_DEBUG_LFR_ID   : amba_device_type := 16#A2#;
+constant APB_ADC_READER   : amba_device_type := 16#F1#;
+
+
+end;
\ No newline at end of file