@@ -0,0 +1,260 | |||
|
1 | #ifndef FSW_PARAMS_H_INCLUDED | |
|
2 | #define FSW_PARAMS_H_INCLUDED | |
|
3 | ||
|
4 | #include "grlib_regs.h" | |
|
5 | #include "fsw_params_processing.h" | |
|
6 | #include "fsw_params_nb_bytes.h" | |
|
7 | #include "tm_byte_positions.h" | |
|
8 | #include "ccsds_types.h" | |
|
9 | ||
|
10 | #define GRSPW_DEVICE_NAME "/dev/grspw0" | |
|
11 | #define UART_DEVICE_NAME "/dev/console" | |
|
12 | ||
|
13 | typedef struct ring_node | |
|
14 | { | |
|
15 | struct ring_node *previous; | |
|
16 | struct ring_node *next; | |
|
17 | unsigned int sid; | |
|
18 | unsigned int coarseTime; | |
|
19 | unsigned int fineTime; | |
|
20 | int buffer_address; | |
|
21 | unsigned int status; | |
|
22 | } ring_node; | |
|
23 | ||
|
24 | //************************ | |
|
25 | // flight software version | |
|
26 | // this parameters is handled by the Qt project options | |
|
27 | ||
|
28 | #define NB_PACKETS_PER_GROUP_OF_CWF 8 // 8 packets containing 336 blk | |
|
29 | #define NB_PACKETS_PER_GROUP_OF_CWF_LIGHT 4 // 4 packets containing 672 blk | |
|
30 | #define NB_SAMPLES_PER_SNAPSHOT 2688 // 336 * 8 = 672 * 4 = 2688 | |
|
31 | #define TIME_OFFSET 2 | |
|
32 | #define TIME_OFFSET_IN_BYTES 8 | |
|
33 | //#define WAVEFORM_EXTENDED_HEADER_OFFSET 22 | |
|
34 | #define NB_BYTES_SWF_BLK (2 * 6) | |
|
35 | #define NB_WORDS_SWF_BLK 3 | |
|
36 | #define NB_BYTES_CWF3_LIGHT_BLK 6 | |
|
37 | //#define WFRM_INDEX_OF_LAST_PACKET 6 // waveforms are transmitted in groups of 2048 blocks, 6 packets of 340 and 1 of 8 | |
|
38 | #define NB_RING_NODES_F0 3 // AT LEAST 3 | |
|
39 | #define NB_RING_NODES_F1 5 // AT LEAST 3 | |
|
40 | #define NB_RING_NODES_F2 5 // AT LEAST 3 | |
|
41 | #define NB_RING_NODES_F3 3 // AT LEAST 3 | |
|
42 | ||
|
43 | //********** | |
|
44 | // LFR MODES | |
|
45 | #define LFR_MODE_STANDBY 0 | |
|
46 | #define LFR_MODE_NORMAL 1 | |
|
47 | #define LFR_MODE_BURST 2 | |
|
48 | #define LFR_MODE_SBM1 3 | |
|
49 | #define LFR_MODE_SBM2 4 | |
|
50 | ||
|
51 | #define TDS_MODE_LFM 5 | |
|
52 | #define TDS_MODE_STANDBY 0 | |
|
53 | #define TDS_MODE_NORMAL 1 | |
|
54 | #define TDS_MODE_BURST 2 | |
|
55 | #define TDS_MODE_SBM1 3 | |
|
56 | #define TDS_MODE_SBM2 4 | |
|
57 | ||
|
58 | #define THR_MODE_STANDBY 0 | |
|
59 | #define THR_MODE_NORMAL 1 | |
|
60 | #define THR_MODE_BURST 2 | |
|
61 | ||
|
62 | #define RTEMS_EVENT_MODE_STANDBY RTEMS_EVENT_0 | |
|
63 | #define RTEMS_EVENT_MODE_NORMAL RTEMS_EVENT_1 | |
|
64 | #define RTEMS_EVENT_MODE_BURST RTEMS_EVENT_2 | |
|
65 | #define RTEMS_EVENT_MODE_SBM1 RTEMS_EVENT_3 | |
|
66 | #define RTEMS_EVENT_MODE_SBM2 RTEMS_EVENT_4 | |
|
67 | #define RTEMS_EVENT_MODE_SBM2_WFRM RTEMS_EVENT_5 | |
|
68 | #define RTEMS_EVENT_NORM_BP1_F0 RTEMS_EVENT_6 | |
|
69 | #define RTEMS_EVENT_NORM_BP2_F0 RTEMS_EVENT_7 | |
|
70 | #define RTEMS_EVENT_NORM_ASM_F0 RTEMS_EVENT_8 // ASM only in NORM mode | |
|
71 | #define RTEMS_EVENT_NORM_BP1_F1 RTEMS_EVENT_9 | |
|
72 | #define RTEMS_EVENT_NORM_BP2_F1 RTEMS_EVENT_10 | |
|
73 | #define RTEMS_EVENT_NORM_ASM_F1 RTEMS_EVENT_11 // ASM only in NORM mode | |
|
74 | #define RTEMS_EVENT_NORM_BP1_F2 RTEMS_EVENT_12 | |
|
75 | #define RTEMS_EVENT_NORM_BP2_F2 RTEMS_EVENT_13 | |
|
76 | #define RTEMS_EVENT_NORM_ASM_F2 RTEMS_EVENT_14 // ASM only in NORM mode | |
|
77 | #define RTEMS_EVENT_SBM_BP1_F0 RTEMS_EVENT_15 | |
|
78 | #define RTEMS_EVENT_SBM_BP2_F0 RTEMS_EVENT_16 | |
|
79 | #define RTEMS_EVENT_SBM_BP1_F1 RTEMS_EVENT_17 | |
|
80 | #define RTEMS_EVENT_SBM_BP2_F1 RTEMS_EVENT_18 | |
|
81 | #define RTEMS_EVENT_BURST_BP1_F0 RTEMS_EVENT_19 | |
|
82 | #define RTEMS_EVENT_BURST_BP2_F0 RTEMS_EVENT_20 | |
|
83 | #define RTEMS_EVENT_BURST_BP1_F1 RTEMS_EVENT_21 | |
|
84 | #define RTEMS_EVENT_BURST_BP2_F1 RTEMS_EVENT_22 | |
|
85 | ||
|
86 | //**************************** | |
|
87 | // LFR DEFAULT MODE PARAMETERS | |
|
88 | // COMMON | |
|
89 | #define DEFAULT_SY_LFR_COMMON0 0x00 | |
|
90 | #define DEFAULT_SY_LFR_COMMON1 0x10 // default value 0 0 0 1 0 0 0 0 | |
|
91 | // NORM | |
|
92 | #define DFLT_SY_LFR_N_SWF_L 2048 // nb sample | |
|
93 | #define DFLT_SY_LFR_N_SWF_P 300 // sec | |
|
94 | #define DFLT_SY_LFR_N_ASM_P 3600 // sec | |
|
95 | #define DFLT_SY_LFR_N_BP_P0 4 // sec | |
|
96 | #define DFLT_SY_LFR_N_BP_P1 20 // sec | |
|
97 | #define DFLT_SY_LFR_N_CWF_LONG_F3 0 // 0 => production of light continuous waveforms at f3 | |
|
98 | #define MIN_DELTA_SNAPSHOT 16 // sec | |
|
99 | // BURST | |
|
100 | #define DEFAULT_SY_LFR_B_BP_P0 1 // sec | |
|
101 | #define DEFAULT_SY_LFR_B_BP_P1 5 // sec | |
|
102 | // SBM1 | |
|
103 | #define DEFAULT_SY_LFR_S1_BP_P0 1 // sec | |
|
104 | #define DEFAULT_SY_LFR_S1_BP_P1 1 // sec | |
|
105 | // SBM2 | |
|
106 | #define DEFAULT_SY_LFR_S2_BP_P0 1 // sec | |
|
107 | #define DEFAULT_SY_LFR_S2_BP_P1 5 // sec | |
|
108 | // ADDITIONAL PARAMETERS | |
|
109 | #define TIME_BETWEEN_TWO_SWF_PACKETS 30 // nb x 10 ms => 300 ms | |
|
110 | #define TIME_BETWEEN_TWO_CWF3_PACKETS 1000 // nb x 10 ms => 10 s | |
|
111 | // STATUS WORD | |
|
112 | #define DEFAULT_STATUS_WORD_BYTE0 0x0d // [0000] [1] [101] mode 4 bits / SPW enabled 1 bit / state is run 3 bits | |
|
113 | #define DEFAULT_STATUS_WORD_BYTE1 0x00 | |
|
114 | // | |
|
115 | #define SY_LFR_DPU_CONNECT_TIMEOUT 100 // 100 * 10 ms = 1 s | |
|
116 | #define SY_LFR_DPU_CONNECT_ATTEMPT 3 | |
|
117 | //**************************** | |
|
118 | ||
|
119 | //***************************** | |
|
120 | // APB REGISTERS BASE ADDRESSES | |
|
121 | #define REGS_ADDR_APBUART 0x80000100 | |
|
122 | #define REGS_ADDR_GPTIMER 0x80000300 | |
|
123 | #define REGS_ADDR_GRSPW 0x80000500 | |
|
124 | #define REGS_ADDR_TIME_MANAGEMENT 0x80000600 | |
|
125 | #define REGS_ADDR_GRGPIO 0x80000b00 | |
|
126 | ||
|
127 | #define REGS_ADDR_SPECTRAL_MATRIX 0x80000f00 | |
|
128 | //#define REGS_ADDR_WAVEFORM_PICKER 0x80000f50 | |
|
129 | #define REGS_ADDR_WAVEFORM_PICKER 0x80000f54 // PDB >= 0.1.28 | |
|
130 | #define REGS_ADDR_VHDL_VERSION 0x80000ff0 | |
|
131 | ||
|
132 | #define APBUART_CTRL_REG_MASK_DB 0xfffff7ff | |
|
133 | #define APBUART_CTRL_REG_MASK_TE 0x00000002 | |
|
134 | // scaler value = system_clock_frequency / ( baud_rate * 8 ) - 1 | |
|
135 | #define APBUART_SCALER_RELOAD_VALUE 0x00000050 // 25 MHz => about 38400 | |
|
136 | ||
|
137 | //********** | |
|
138 | // IRQ LINES | |
|
139 | #define IRQ_SM_SIMULATOR 9 | |
|
140 | #define IRQ_SPARC_SM_SIMULATOR 0x19 // see sparcv8.pdf p.76 for interrupt levels | |
|
141 | #define IRQ_WAVEFORM_PICKER 14 | |
|
142 | #define IRQ_SPARC_WAVEFORM_PICKER 0x1e // see sparcv8.pdf p.76 for interrupt levels | |
|
143 | #define IRQ_SPECTRAL_MATRIX 6 | |
|
144 | #define IRQ_SPARC_SPECTRAL_MATRIX 0x16 // see sparcv8.pdf p.76 for interrupt levels | |
|
145 | ||
|
146 | //***** | |
|
147 | // TIME | |
|
148 | #define CLKDIV_SM_SIMULATOR (10416 - 1) // 10 ms => nominal is 1/96 = 0.010416667, 10417 - 1 = 10416 | |
|
149 | #define TIMER_SM_SIMULATOR 1 | |
|
150 | #define HK_PERIOD 100 // 100 * 10ms => 1s | |
|
151 | #define SY_LFR_TIME_SYN_TIMEOUT_in_ms 2000 | |
|
152 | #define SY_LFR_TIME_SYN_TIMEOUT_in_ticks 200 // 200 * 10 ms = 2 s | |
|
153 | ||
|
154 | //********** | |
|
155 | // LPP CODES | |
|
156 | #define LFR_SUCCESSFUL 0 | |
|
157 | #define LFR_DEFAULT 1 | |
|
158 | #define LFR_EXE_ERROR 2 | |
|
159 | ||
|
160 | //****** | |
|
161 | // RTEMS | |
|
162 | #define TASKID_RECV 1 | |
|
163 | #define TASKID_ACTN 2 | |
|
164 | #define TASKID_SPIQ 3 | |
|
165 | #define TASKID_STAT 4 | |
|
166 | #define TASKID_AVF0 5 | |
|
167 | #define TASKID_SWBD 6 | |
|
168 | #define TASKID_WFRM 7 | |
|
169 | #define TASKID_DUMB 8 | |
|
170 | #define TASKID_HOUS 9 | |
|
171 | #define TASKID_PRC0 10 | |
|
172 | #define TASKID_CWF3 11 | |
|
173 | #define TASKID_CWF2 12 | |
|
174 | #define TASKID_CWF1 13 | |
|
175 | #define TASKID_SEND 14 | |
|
176 | #define TASKID_WTDG 15 | |
|
177 | #define TASKID_AVF1 16 | |
|
178 | #define TASKID_PRC1 17 | |
|
179 | #define TASKID_AVF2 18 | |
|
180 | #define TASKID_PRC2 19 | |
|
181 | ||
|
182 | #define TASK_PRIORITY_SPIQ 5 | |
|
183 | #define TASK_PRIORITY_WTDG 20 | |
|
184 | #define TASK_PRIORITY_HOUS 30 | |
|
185 | #define TASK_PRIORITY_CWF1 35 // CWF1 and CWF2 are never running together | |
|
186 | #define TASK_PRIORITY_CWF2 35 // | |
|
187 | #define TASK_PRIORITY_SWBD 37 // SWBD has a lower priority than WFRM, this is to extract the snapshot before sending it | |
|
188 | #define TASK_PRIORITY_WFRM 40 | |
|
189 | #define TASK_PRIORITY_CWF3 40 // there is a printf in this function, be careful with its priority wrt CWF1 | |
|
190 | #define TASK_PRIORITY_SEND 45 | |
|
191 | #define TASK_PRIORITY_RECV 50 | |
|
192 | #define TASK_PRIORITY_ACTN 50 | |
|
193 | #define TASK_PRIORITY_AVF0 60 | |
|
194 | #define TASK_PRIORITY_AVF1 70 | |
|
195 | #define TASK_PRIORITY_PRC0 100 | |
|
196 | #define TASK_PRIORITY_PRC1 100 | |
|
197 | #define TASK_PRIORITY_AVF2 110 | |
|
198 | #define TASK_PRIORITY_PRC2 110 | |
|
199 | #define TASK_PRIORITY_STAT 200 | |
|
200 | #define TASK_PRIORITY_DUMB 200 | |
|
201 | ||
|
202 | #define MSG_QUEUE_COUNT_RECV 10 | |
|
203 | #define MSG_QUEUE_COUNT_SEND 50 | |
|
204 | #define MSG_QUEUE_COUNT_PRC0 10 | |
|
205 | #define MSG_QUEUE_COUNT_PRC1 10 | |
|
206 | #define MSG_QUEUE_COUNT_PRC2 5 | |
|
207 | #define MSG_QUEUE_SIZE_SEND 810 // 806 + 4 => TM_LFR_SCIENCE_BURST_BP2_F1 | |
|
208 | #define ACTION_MSG_SPW_IOCTL_SEND_SIZE 24 // hlen *hdr dlen *data sent options | |
|
209 | #define MSG_QUEUE_SIZE_PRC0 20 // two pointers and one rtems_event + 2 integers | |
|
210 | #define MSG_QUEUE_SIZE_PRC1 20 // two pointers and one rtems_event + 2 integers | |
|
211 | #define MSG_QUEUE_SIZE_PRC2 20 // two pointers and one rtems_event + 2 integers | |
|
212 | ||
|
213 | #define QUEUE_RECV 0 | |
|
214 | #define QUEUE_SEND 1 | |
|
215 | #define QUEUE_PRC0 2 | |
|
216 | #define QUEUE_PRC1 3 | |
|
217 | #define QUEUE_PRC2 4 | |
|
218 | ||
|
219 | //******* | |
|
220 | // MACROS | |
|
221 | #ifdef PRINT_MESSAGES_ON_CONSOLE | |
|
222 | #define PRINTF(x) printf(x); | |
|
223 | #define PRINTF1(x,y) printf(x,y); | |
|
224 | #define PRINTF2(x,y,z) printf(x,y,z); | |
|
225 | #else | |
|
226 | #define PRINTF(x) ; | |
|
227 | #define PRINTF1(x,y) ; | |
|
228 | #define PRINTF2(x,y,z) ; | |
|
229 | #endif | |
|
230 | ||
|
231 | #ifdef BOOT_MESSAGES | |
|
232 | #define BOOT_PRINTF(x) printf(x); | |
|
233 | #define BOOT_PRINTF1(x,y) printf(x,y); | |
|
234 | #define BOOT_PRINTF2(x,y,z) printf(x,y,z); | |
|
235 | #else | |
|
236 | #define BOOT_PRINTF(x) ; | |
|
237 | #define BOOT_PRINTF1(x,y) ; | |
|
238 | #define BOOT_PRINTF2(x,y,z) ; | |
|
239 | #endif | |
|
240 | ||
|
241 | #ifdef DEBUG_MESSAGES | |
|
242 | #define DEBUG_PRINTF(x) printf(x); | |
|
243 | #define DEBUG_PRINTF1(x,y) printf(x,y); | |
|
244 | #define DEBUG_PRINTF2(x,y,z) printf(x,y,z); | |
|
245 | #else | |
|
246 | #define DEBUG_PRINTF(x) ; | |
|
247 | #define DEBUG_PRINTF1(x,y) ; | |
|
248 | #define DEBUG_PRINTF2(x,y,z) ; | |
|
249 | #endif | |
|
250 | ||
|
251 | #define CPU_USAGE_REPORT_PERIOD 6 // * 10 s = period | |
|
252 | ||
|
253 | struct param_local_str{ | |
|
254 | unsigned int local_sbm1_nb_cwf_sent; | |
|
255 | unsigned int local_sbm1_nb_cwf_max; | |
|
256 | unsigned int local_sbm2_nb_cwf_sent; | |
|
257 | unsigned int local_sbm2_nb_cwf_max; | |
|
258 | }; | |
|
259 | ||
|
260 | #endif // FSW_PARAMS_H_INCLUDED |
General Comments 0
You need to be logged in to leave comments.
Login now