@@ -1,156 +1,158 | |||
|
1 | 1 | #ifndef FSW_MISC_H_INCLUDED |
|
2 | 2 | #define FSW_MISC_H_INCLUDED |
|
3 | 3 | |
|
4 | 4 | #include <rtems.h> |
|
5 | 5 | #include <stdio.h> |
|
6 | 6 | #include <grspw.h> |
|
7 | 7 | #include <grlib_regs.h> |
|
8 | 8 | |
|
9 | 9 | #include "fsw_params.h" |
|
10 | 10 | #include "fsw_spacewire.h" |
|
11 | 11 | #include "lfr_cpu_usage_report.h" |
|
12 | 12 | |
|
13 | 13 | #define WATCHDOG_LOOP_PRINTF 10 |
|
14 | 14 | #define WATCHDOG_LOOP_DEBUG 3 |
|
15 | 15 | |
|
16 | 16 | #define NB_RTEMS_EVENTS 32 |
|
17 | 17 | #define EVENT_12 12 |
|
18 | 18 | #define EVENT_13 13 |
|
19 | 19 | #define EVENT_14 14 |
|
20 | 20 | #define DUMB_MESSAGE_1 "in DUMB *** timecode_irq_handler" |
|
21 | 21 | #define DUMB_MESSAGE_12 "WATCHDOG timer" |
|
22 | 22 | #define DUMB_MESSAGE_13 "TIMECODE timer" |
|
23 | 23 | |
|
24 | 24 | enum lfr_reset_cause_t{ |
|
25 | 25 | UNKNOWN_CAUSE, |
|
26 | 26 | POWER_ON, |
|
27 | 27 | TC_RESET, |
|
28 | 28 | WATCHDOG, |
|
29 | 29 | ERROR_RESET, |
|
30 | 30 | UNEXP_RESET |
|
31 | 31 | }; |
|
32 | 32 | |
|
33 | 33 | typedef struct{ |
|
34 | 34 | unsigned char dpu_spw_parity; |
|
35 | 35 | unsigned char dpu_spw_disconnect; |
|
36 | 36 | unsigned char dpu_spw_escape; |
|
37 | 37 | unsigned char dpu_spw_credit; |
|
38 | 38 | unsigned char dpu_spw_write_sync; |
|
39 | 39 | unsigned char timecode_erroneous; |
|
40 | 40 | unsigned char timecode_missing; |
|
41 | 41 | unsigned char timecode_invalid; |
|
42 | 42 | unsigned char time_timecode_it; |
|
43 | 43 | unsigned char time_not_synchro; |
|
44 | 44 | unsigned char time_timecode_ctr; |
|
45 | 45 | unsigned char ahb_correctable; |
|
46 | 46 | } hk_lfr_le_t; |
|
47 | 47 | |
|
48 | 48 | typedef struct{ |
|
49 | 49 | unsigned char dpu_spw_early_eop; |
|
50 | 50 | unsigned char dpu_spw_invalid_addr; |
|
51 | 51 | unsigned char dpu_spw_eep; |
|
52 | 52 | unsigned char dpu_spw_rx_too_big; |
|
53 | 53 | } hk_lfr_me_t; |
|
54 | 54 | |
|
55 | 55 | #define B00 196 |
|
56 | 56 | #define B01 196 |
|
57 | 57 | #define B02 0 |
|
58 | 58 | #define B10 131 |
|
59 | 59 | #define B11 -244 |
|
60 | 60 | #define B12 131 |
|
61 | 61 | #define B20 161 |
|
62 | 62 | #define B21 -314 |
|
63 | 63 | #define B22 161 |
|
64 | 64 | |
|
65 | 65 | #define A00 1 |
|
66 | 66 | #define A01 -925 |
|
67 | 67 | #define A02 0 |
|
68 | 68 | #define A10 1 |
|
69 | 69 | #define A11 -947 |
|
70 | 70 | #define A12 439 |
|
71 | 71 | #define A20 1 |
|
72 | 72 | #define A21 -993 |
|
73 | 73 | #define A22 486 |
|
74 | 74 | |
|
75 | 75 | #define GAIN_B0 12 |
|
76 | 76 | #define GAIN_B1 11 |
|
77 | 77 | #define GAIN_B2 10 |
|
78 | 78 | |
|
79 | 79 | #define GAIN_A0 10 |
|
80 | 80 | #define GAIN_A1 9 |
|
81 | 81 | #define GAIN_A2 9 |
|
82 | 82 | |
|
83 | 83 | #define NB_COEFFS 3 |
|
84 | 84 | #define COEFF0 0 |
|
85 | 85 | #define COEFF1 1 |
|
86 | 86 | #define COEFF2 2 |
|
87 | 87 | |
|
88 | 88 | typedef struct filter_ctx |
|
89 | 89 | { |
|
90 | 90 | int W[NB_COEFFS][NB_COEFFS]; |
|
91 | 91 | }filter_ctx; |
|
92 | 92 | |
|
93 | 93 | extern gptimer_regs_t *gptimer_regs; |
|
94 | 94 | extern void ASR16_get_FPRF_IURF_ErrorCounters( unsigned int*, unsigned int* ); |
|
95 | 95 | extern void CCR_getInstructionAndDataErrorCounters( unsigned int*, unsigned int* ); |
|
96 | 96 | |
|
97 | 97 | extern rtems_name name_hk_rate_monotonic; // name of the HK rate monotonic |
|
98 | 98 | extern rtems_id HK_id;// id of the HK rate monotonic period |
|
99 | 99 | extern rtems_name name_avgv_rate_monotonic; // name of the AVGV rate monotonic |
|
100 | 100 | extern rtems_id AVGV_id;// id of the AVGV rate monotonic period |
|
101 | 101 | |
|
102 | 102 | void timer_configure( unsigned char timer, unsigned int clock_divider, |
|
103 | 103 | unsigned char interrupt_level, rtems_isr (*timer_isr)() ); |
|
104 | #ifdef ENABLE_DEAD_CODE | |
|
104 | 105 | void timer_start( unsigned char timer ); |
|
106 | #endif | |
|
105 | 107 | void timer_stop( unsigned char timer ); |
|
106 | 108 | void timer_set_clock_divider(unsigned char timer, unsigned int clock_divider); |
|
107 | 109 | |
|
108 | 110 | // WATCHDOG |
|
109 | 111 | rtems_isr watchdog_isr( rtems_vector_number vector ); |
|
110 | 112 | void watchdog_configure(void); |
|
111 | 113 | void watchdog_stop(void); |
|
112 | 114 | void watchdog_reload(void); |
|
113 | 115 | void watchdog_start(void); |
|
114 | 116 | |
|
115 | 117 | // SERIAL LINK |
|
116 | 118 | int send_console_outputs_on_apbuart_port( void ); |
|
117 | 119 | int enable_apbuart_transmitter( void ); |
|
118 | 120 | void set_apbuart_scaler_reload_register(unsigned int regs, unsigned int value); |
|
119 | 121 | |
|
120 | 122 | // RTEMS TASKS |
|
121 | 123 | rtems_task load_task( rtems_task_argument argument ); |
|
122 | 124 | rtems_task hous_task( rtems_task_argument argument ); |
|
123 | 125 | rtems_task avgv_task( rtems_task_argument argument ); |
|
124 | 126 | rtems_task dumb_task( rtems_task_argument unused ); |
|
125 | 127 | rtems_task scrubbing_task( rtems_task_argument unused ); |
|
126 | 128 | rtems_task calibration_sweep_task( rtems_task_argument unused ); |
|
127 | 129 | |
|
128 | 130 | void init_housekeeping_parameters( void ); |
|
129 | 131 | void increment_seq_counter(unsigned short *packetSequenceControl); |
|
130 | 132 | void getTime( unsigned char *time); |
|
131 | 133 | unsigned long long int getTimeAsUnsignedLongLongInt( ); |
|
132 | 134 | void get_temperatures( unsigned char *temperatures ); |
|
133 | 135 | void get_v_e1_e2_f3( unsigned char *spacecraft_potential ); |
|
134 | 136 | void get_cpu_load( unsigned char *resource_statistics ); |
|
135 | 137 | void set_hk_lfr_sc_potential_flag( bool state ); |
|
136 | 138 | void set_sy_lfr_pas_filter_enabled( bool state ); |
|
137 | 139 | void set_sy_lfr_watchdog_enabled( bool state ); |
|
138 | 140 | void set_hk_lfr_calib_enable( bool state ); |
|
139 | 141 | void set_hk_lfr_reset_cause( enum lfr_reset_cause_t lfr_reset_cause ); |
|
140 | 142 | void hk_lfr_le_me_he_update(); |
|
141 | 143 | void set_hk_lfr_time_not_synchro(); |
|
142 | 144 | |
|
143 | 145 | extern int sched_yield( void ); |
|
144 | 146 | extern void rtems_cpu_usage_reset(); |
|
145 | 147 | extern ring_node *current_ring_node_f3; |
|
146 | 148 | extern ring_node *ring_node_to_send_cwf_f3; |
|
147 | 149 | extern ring_node waveform_ring_f3[]; |
|
148 | 150 | extern unsigned short sequenceCounterHK; |
|
149 | 151 | |
|
150 | 152 | extern unsigned char hk_lfr_q_sd_fifo_size_max; |
|
151 | 153 | extern unsigned char hk_lfr_q_rv_fifo_size_max; |
|
152 | 154 | extern unsigned char hk_lfr_q_p0_fifo_size_max; |
|
153 | 155 | extern unsigned char hk_lfr_q_p1_fifo_size_max; |
|
154 | 156 | extern unsigned char hk_lfr_q_p2_fifo_size_max; |
|
155 | 157 | |
|
156 | 158 | #endif // FSW_MISC_H_INCLUDED |
@@ -1,112 +1,114 | |||
|
1 | 1 | #ifndef TC_HANDLER_H_INCLUDED |
|
2 | 2 | #define TC_HANDLER_H_INCLUDED |
|
3 | 3 | |
|
4 | 4 | #include <rtems.h> |
|
5 | 5 | #include <leon.h> |
|
6 | 6 | |
|
7 | 7 | #include "tc_load_dump_parameters.h" |
|
8 | 8 | #include "tc_acceptance.h" |
|
9 | 9 | #include "tm_lfr_tc_exe.h" |
|
10 | 10 | #include "wf_handler.h" |
|
11 | 11 | #include "fsw_processing.h" |
|
12 | 12 | |
|
13 | 13 | #include "lfr_cpu_usage_report.h" |
|
14 | 14 | |
|
15 | 15 | #define MAX_DELTA_COARSE_TIME 3 |
|
16 | 16 | #define NB_SCIENCE_TASKS 10 |
|
17 | 17 | #define NB_ASM_TASKS 6 |
|
18 | 18 | #define STATUS_0 0 |
|
19 | 19 | #define STATUS_1 1 |
|
20 | 20 | #define STATUS_2 2 |
|
21 | 21 | #define STATUS_3 3 |
|
22 | 22 | #define STATUS_4 4 |
|
23 | 23 | #define STATUS_5 5 |
|
24 | 24 | #define STATUS_6 6 |
|
25 | 25 | #define STATUS_7 7 |
|
26 | 26 | #define STATUS_8 8 |
|
27 | 27 | #define STATUS_9 9 |
|
28 | 28 | |
|
29 | 29 | #define CAL_F0 625. |
|
30 | 30 | #define CAL_F1 10000. |
|
31 | 31 | #define CAL_W0 (2. * pi * CAL_F0) |
|
32 | 32 | #define CAL_W1 (2. * pi * CAL_F1) |
|
33 | 33 | #define CAL_A0 1. |
|
34 | 34 | #define CAL_A1 2. |
|
35 | 35 | #define CAL_FS 160256.410 |
|
36 | 36 | #define CAL_SCALE_FACTOR (0.250 / 0.000654) // 191, 500 mVpp, 2 sinus waves => 500 mVpp each, amplitude = 250 mV |
|
37 | 37 | #define CAL_NB_PTS 256 |
|
38 | 38 | #define CAL_DATA_MASK 0xfff |
|
39 | 39 | #define CAL_F_DIVISOR 38 // 25 MHz => 160 256 (39 - 1) |
|
40 | 40 | #define CAL_F_DIVISOR_MIN 38 |
|
41 | 41 | #define CAL_F_DIVISOR_MAX (38*2*2*2*2) |
|
42 | 42 | // INTERLEAVED MODE |
|
43 | 43 | #define CAL_FS_INTER 240384.615 |
|
44 | 44 | #define CAL_NB_PTS_INTER 384 |
|
45 | 45 | #define CAL_DATA_MASK_INTER 0x3f |
|
46 | 46 | #define CAL_DATA_SHIFT_INTER 12 |
|
47 | 47 | #define BYTES_FOR_2_SAMPLES 3 // one need 3 bytes = 24 bits to store 3 samples of 12 bits in interleaved mode |
|
48 | 48 | #define STEPS_FOR_STORAGE_INTER 128 |
|
49 | 49 | #define CAL_F_DIVISOR_INTER 26 // 25 MHz => 240 384 |
|
50 | 50 | |
|
51 | 51 | extern unsigned int lastValidEnterModeTime; |
|
52 | 52 | extern unsigned char oneTcLfrUpdateTimeReceived; |
|
53 | 53 | |
|
54 | 54 | //*********** |
|
55 | 55 | // RTEMS TASK |
|
56 | 56 | rtems_task actn_task( rtems_task_argument unused ); |
|
57 | 57 | |
|
58 | 58 | //*********** |
|
59 | 59 | // TC ACTIONS |
|
60 | 60 | int action_reset( ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time ); |
|
61 | 61 | int action_enter_mode(ccsdsTelecommandPacket_t *TC, rtems_id queue_id); |
|
62 | 62 | int action_update_info( ccsdsTelecommandPacket_t *TC, rtems_id queue_id ); |
|
63 | 63 | int action_enable_calibration( ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time ); |
|
64 | 64 | int action_disable_calibration( ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time ); |
|
65 | 65 | int action_update_time( ccsdsTelecommandPacket_t *TC); |
|
66 | 66 | |
|
67 | 67 | // mode transition |
|
68 | 68 | int check_mode_value( unsigned char requestedMode ); |
|
69 | 69 | int check_mode_transition( unsigned char requestedMode ); |
|
70 | 70 | void update_last_valid_transition_date( unsigned int transitionCoarseTime ); |
|
71 | 71 | int check_transition_date( unsigned int transitionCoarseTime ); |
|
72 | 72 | int stop_spectral_matrices( void ); |
|
73 | 73 | int stop_current_mode( void ); |
|
74 | 74 | int enter_mode_standby(void ); |
|
75 | 75 | int enter_mode_normal( unsigned int transitionCoarseTime ); |
|
76 | 76 | int enter_mode_burst( unsigned int transitionCoarseTime ); |
|
77 | 77 | int enter_mode_sbm1( unsigned int transitionCoarseTime ); |
|
78 | 78 | int enter_mode_sbm2( unsigned int transitionCoarseTime ); |
|
79 | 79 | int restart_science_tasks( unsigned char lfrRequestedMode ); |
|
80 | 80 | int restart_asm_tasks(unsigned char lfrRequestedMode ); |
|
81 | 81 | int suspend_science_tasks(void); |
|
82 | 82 | int suspend_asm_tasks( void ); |
|
83 | 83 | void launch_waveform_picker( unsigned char mode , unsigned int transitionCoarseTime ); |
|
84 | 84 | void launch_spectral_matrix( void ); |
|
85 | 85 | void set_sm_irq_onNewMatrix( unsigned char value ); |
|
86 | 86 | void set_sm_irq_onError( unsigned char value ); |
|
87 | 87 | |
|
88 | 88 | // other functions |
|
89 | 89 | void updateLFRCurrentMode(unsigned char requestedMode); |
|
90 | 90 | void set_lfr_soft_reset( unsigned char value ); |
|
91 | 91 | void reset_lfr( void ); |
|
92 | 92 | // CALIBRATION |
|
93 | 93 | void setCalibrationPrescaler( unsigned int prescaler ); |
|
94 | 94 | void setCalibrationDivisor( unsigned int divisionFactor ); |
|
95 | 95 | void setCalibrationData( void ); |
|
96 | 96 | void setCalibrationReload( bool state); |
|
97 | 97 | void setCalibrationEnable( bool state ); |
|
98 | #ifdef ENABLE_DEAD_CODE | |
|
98 | 99 | void setCalibrationInterleaved( bool state ); |
|
100 | #endif | |
|
99 | 101 | void setCalibration( bool state ); |
|
100 | 102 | void configureCalibration( bool interleaved ); |
|
101 | 103 | // |
|
102 | 104 | void update_last_TC_exe( ccsdsTelecommandPacket_t *TC , unsigned char *time ); |
|
103 | 105 | void update_last_TC_rej(ccsdsTelecommandPacket_t *TC , unsigned char *time ); |
|
104 | 106 | void close_action( ccsdsTelecommandPacket_t *TC, int result, rtems_id queue_id ); |
|
105 | 107 | |
|
106 | 108 | extern rtems_status_code get_message_queue_id_send( rtems_id *queue_id ); |
|
107 | 109 | extern rtems_status_code get_message_queue_id_recv( rtems_id *queue_id ); |
|
108 | 110 | |
|
109 | 111 | #endif // TC_HANDLER_H_INCLUDED |
|
110 | 112 | |
|
111 | 113 | |
|
112 | 114 |
@@ -1,27 +1,29 | |||
|
1 | 1 | #ifndef TM_LFR_TC_EXE_H_INCLUDED |
|
2 | 2 | #define TM_LFR_TC_EXE_H_INCLUDED |
|
3 | 3 | |
|
4 | 4 | #include <rtems.h> |
|
5 | 5 | #include <stdio.h> |
|
6 | 6 | #include <ccsds_types.h> |
|
7 | 7 | |
|
8 | 8 | #include "fsw_params.h" |
|
9 | 9 | #include "fsw_spacewire.h" |
|
10 | 10 | |
|
11 | 11 | extern unsigned short sequenceCounters_TC_EXE[]; |
|
12 | 12 | |
|
13 | 13 | int send_tm_lfr_tc_exe_success( ccsdsTelecommandPacket_t *TC, rtems_id queue_id ); |
|
14 | 14 | int send_tm_lfr_tc_exe_inconsistent( ccsdsTelecommandPacket_t *TC, rtems_id queue_id, |
|
15 | 15 | unsigned char byte_position, unsigned char rcv_value ); |
|
16 | 16 | int send_tm_lfr_tc_exe_not_executable( ccsdsTelecommandPacket_t *TC, rtems_id queue_id ); |
|
17 | #ifdef ENABLE_DEAD_CODE | |
|
17 | 18 | int send_tm_lfr_tc_exe_not_implemented( ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time ); |
|
19 | #endif | |
|
18 | 20 | int send_tm_lfr_tc_exe_error(ccsdsTelecommandPacket_t *TC, rtems_id queue_id ); |
|
19 | 21 | int send_tm_lfr_tc_exe_corrupted( ccsdsTelecommandPacket_t *TC, rtems_id queue_id, |
|
20 | 22 | unsigned char *computed_CRC, unsigned char *currentTC_LEN_RCV, unsigned char destinationID ); |
|
21 | 23 | |
|
22 | 24 | void increment_seq_counter_destination_id( unsigned char *packet_sequence_control, unsigned char destination_id ); |
|
23 | 25 | |
|
24 | 26 | #endif // TM_LFR_TC_EXE_H_INCLUDED |
|
25 | 27 | |
|
26 | 28 | |
|
27 | 29 |
@@ -1,136 +1,136 | |||
|
1 | 1 | cmake_minimum_required (VERSION 3.5) |
|
2 | 2 | project (fsw) |
|
3 | 3 | |
|
4 | 4 | include(sparc-rtems) |
|
5 | 5 | include(cppcheck) |
|
6 | 6 | |
|
7 | 7 | include_directories("../header" |
|
8 | 8 | "../header/lfr_common_headers" |
|
9 | 9 | "../header/processing" |
|
10 | 10 | "../LFR_basic-parameters" |
|
11 | 11 | "../src") |
|
12 | 12 | |
|
13 | 13 | set(SOURCES wf_handler.c |
|
14 | 14 | tc_handler.c |
|
15 | 15 | fsw_misc.c |
|
16 | 16 | fsw_init.c |
|
17 | 17 | fsw_globals.c |
|
18 | 18 | fsw_spacewire.c |
|
19 | 19 | tc_load_dump_parameters.c |
|
20 | 20 | tm_lfr_tc_exe.c |
|
21 | 21 | tc_acceptance.c |
|
22 | 22 | processing/fsw_processing.c |
|
23 | 23 | processing/avf0_prc0.c |
|
24 | 24 | processing/avf1_prc1.c |
|
25 | 25 | processing/avf2_prc2.c |
|
26 | 26 | lfr_cpu_usage_report.c |
|
27 | 27 | ${LFR_BP_SRC} |
|
28 | 28 | ../header/wf_handler.h |
|
29 | 29 | ../header/tc_handler.h |
|
30 | 30 | ../header/grlib_regs.h |
|
31 | 31 | ../header/fsw_misc.h |
|
32 | 32 | ../header/fsw_init.h |
|
33 | 33 | ../header/fsw_spacewire.h |
|
34 | 34 | ../header/tc_load_dump_parameters.h |
|
35 | 35 | ../header/tm_lfr_tc_exe.h |
|
36 | 36 | ../header/tc_acceptance.h |
|
37 | 37 | ../header/processing/fsw_processing.h |
|
38 | 38 | ../header/processing/avf0_prc0.h |
|
39 | 39 | ../header/processing/avf1_prc1.h |
|
40 | 40 | ../header/processing/avf2_prc2.h |
|
41 | 41 | ../header/fsw_params_wf_handler.h |
|
42 | 42 | ../header/lfr_cpu_usage_report.h |
|
43 | 43 | ../header/lfr_common_headers/ccsds_types.h |
|
44 | 44 | ../header/lfr_common_headers/fsw_params.h |
|
45 | 45 | ../header/lfr_common_headers/fsw_params_nb_bytes.h |
|
46 | 46 | ../header/lfr_common_headers/fsw_params_processing.h |
|
47 | 47 | ../header/lfr_common_headers/tm_byte_positions.h |
|
48 | 48 | ../LFR_basic-parameters/basic_parameters.h |
|
49 | 49 | ../LFR_basic-parameters/basic_parameters_params.h |
|
50 | 50 | ../header/GscMemoryLPP.hpp |
|
51 | 51 | ) |
|
52 | 52 | |
|
53 | 53 | |
|
54 | 54 | option(FSW_verbose "Enable verbose LFR" OFF) |
|
55 | 55 | option(FSW_boot_messages "Enable LFR boot messages" OFF) |
|
56 | 56 | option(FSW_debug_messages "Enable LFR debug messages" OFF) |
|
57 | 57 | option(FSW_cpu_usage_report "Enable LFR cpu usage report" OFF) |
|
58 | 58 | option(FSW_stack_report "Enable LFR stack report" OFF) |
|
59 | 59 | option(FSW_vhdl_dev "?" OFF) |
|
60 | 60 | option(FSW_lpp_dpu_destid "Set to debug at LPP" OFF) |
|
61 | 61 | option(FSW_debug_watchdog "Enable debug watchdog" OFF) |
|
62 | 62 | option(FSW_debug_tch "?" OFF) |
|
63 | 63 | option(FSW_Instrument_Scrubbing "Enable scrubbing counter" OFF) |
|
64 | 64 | option(FSW_Enable_Dead_Code "Enable dead code compilation, this is used to hide by default unused code." OFF) |
|
65 | 65 | |
|
66 | 66 | set(SW_VERSION_N1 "3" CACHE STRING "Choose N1 FSW Version." FORCE) |
|
67 | 67 | set(SW_VERSION_N2 "2" CACHE STRING "Choose N2 FSW Version." FORCE) |
|
68 | 68 | set(SW_VERSION_N3 "0" CACHE STRING "Choose N3 FSW Version." FORCE) |
|
69 |
set(SW_VERSION_N4 "2 |
|
|
69 | set(SW_VERSION_N4 "24" CACHE STRING "Choose N4 FSW Version." FORCE) | |
|
70 | 70 | |
|
71 | 71 | if(FSW_verbose) |
|
72 | 72 | add_definitions(-DPRINT_MESSAGES_ON_CONSOLE) |
|
73 | 73 | endif() |
|
74 | 74 | if(FSW_boot_messages) |
|
75 | 75 | add_definitions(-DBOOT_MESSAGES) |
|
76 | 76 | endif() |
|
77 | 77 | if(FSW_debug_messages) |
|
78 | 78 | add_definitions(-DDEBUG_MESSAGES) |
|
79 | 79 | endif() |
|
80 | 80 | if(FSW_cpu_usage_report) |
|
81 | 81 | add_definitions(-DPRINT_TASK_STATISTICS) |
|
82 | 82 | endif() |
|
83 | 83 | if(FSW_stack_report) |
|
84 | 84 | add_definitions(-DPRINT_STACK_REPORT) |
|
85 | 85 | endif() |
|
86 | 86 | if(FSW_vhdl_dev) |
|
87 | 87 | add_definitions(-DVHDL_DEV) |
|
88 | 88 | endif() |
|
89 | 89 | if(FSW_lpp_dpu_destid) |
|
90 | 90 | add_definitions(-DLPP_DPU_DESTID) |
|
91 | 91 | endif() |
|
92 | 92 | if(FSW_debug_watchdog) |
|
93 | 93 | add_definitions(-DDEBUG_WATCHDOG) |
|
94 | 94 | endif() |
|
95 | 95 | if(FSW_debug_tch) |
|
96 | 96 | add_definitions(-DDEBUG_TCH) |
|
97 | 97 | endif() |
|
98 | 98 | |
|
99 | 99 | if(FSW_Enable_Dead_Code) |
|
100 | 100 | add_definitions(-DENABLE_DEAD_CODE) |
|
101 | 101 | endif() |
|
102 | 102 | |
|
103 | 103 | |
|
104 | 104 | |
|
105 | 105 | |
|
106 | 106 | add_definitions(-DMSB_FIRST_TCH) |
|
107 | 107 | |
|
108 | 108 | add_definitions(-DSWVERSION=-1-0) |
|
109 | 109 | add_definitions(-DSW_VERSION_N1=${SW_VERSION_N1}) |
|
110 | 110 | add_definitions(-DSW_VERSION_N2=${SW_VERSION_N2}) |
|
111 | 111 | add_definitions(-DSW_VERSION_N3=${SW_VERSION_N3}) |
|
112 | 112 | add_definitions(-DSW_VERSION_N4=${SW_VERSION_N4}) |
|
113 | 113 | |
|
114 | 114 | add_executable(fsw ${SOURCES}) |
|
115 | 115 | |
|
116 | 116 | if(FSW_Instrument_Scrubbing) |
|
117 | 117 | add_definitions(-DENABLE_SCRUBBING_COUNTER) |
|
118 | 118 | endif() |
|
119 | 119 | |
|
120 | 120 | if(Coverage) |
|
121 | 121 | target_link_libraries(fsw gcov) |
|
122 | 122 | SET_TARGET_PROPERTIES(fsw PROPERTIES COMPILE_FLAGS "-fprofile-arcs -ftest-coverage") |
|
123 | 123 | endif() |
|
124 | 124 | |
|
125 | 125 | |
|
126 | 126 | if(fix-b2bst) |
|
127 | 127 | check_b2bst(fsw ${CMAKE_CURRENT_BINARY_DIR}) |
|
128 | 128 | endif() |
|
129 | 129 | |
|
130 | 130 | if(NOT FSW_lpp_dpu_destid) |
|
131 | 131 | build_srec(fsw ${CMAKE_CURRENT_BINARY_DIR} "${SW_VERSION_N1}-${SW_VERSION_N2}-${SW_VERSION_N3}-${SW_VERSION_N4}") |
|
132 | 132 | endif() |
|
133 | 133 | |
|
134 | 134 | |
|
135 | 135 | #add_test_cppcheck(fsw STYLE UNUSED_FUNCTIONS POSSIBLE_ERROR MISSING_INCLUDE) |
|
136 | 136 |
@@ -1,1692 +1,1694 | |||
|
1 | 1 | /*------------------------------------------------------------------------------ |
|
2 | 2 | -- Solar Orbiter's Low Frequency Receiver Flight Software (LFR FSW), |
|
3 | 3 | -- This file is a part of the LFR FSW |
|
4 | 4 | -- Copyright (C) 2012-2018, Plasma Physics Laboratory - CNRS |
|
5 | 5 | -- |
|
6 | 6 | -- This program is free software; you can redistribute it and/or modify |
|
7 | 7 | -- it under the terms of the GNU General Public License as published by |
|
8 | 8 | -- the Free Software Foundation; either version 2 of the License, or |
|
9 | 9 | -- (at your option) any later version. |
|
10 | 10 | -- |
|
11 | 11 | -- This program is distributed in the hope that it will be useful, |
|
12 | 12 | -- but WITHOUT ANY WARRANTY; without even the implied warranty of |
|
13 | 13 | -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|
14 | 14 | -- GNU General Public License for more details. |
|
15 | 15 | -- |
|
16 | 16 | -- You should have received a copy of the GNU General Public License |
|
17 | 17 | -- along with this program; if not, write to the Free Software |
|
18 | 18 | -- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
|
19 | 19 | -------------------------------------------------------------------------------*/ |
|
20 | 20 | /*-- Author : Paul Leroy |
|
21 | 21 | -- Contact : Alexis Jeandet |
|
22 | 22 | -- Mail : alexis.jeandet@lpp.polytechnique.fr |
|
23 | 23 | ----------------------------------------------------------------------------*/ |
|
24 | 24 | /** Functions and tasks related to TeleCommand handling. |
|
25 | 25 | * |
|
26 | 26 | * @file |
|
27 | 27 | * @author P. LEROY |
|
28 | 28 | * |
|
29 | 29 | * A group of functions to handle TeleCommands:\n |
|
30 | 30 | * action launching\n |
|
31 | 31 | * TC parsing\n |
|
32 | 32 | * ... |
|
33 | 33 | * |
|
34 | 34 | */ |
|
35 | 35 | |
|
36 | 36 | #include "tc_handler.h" |
|
37 | 37 | #include "math.h" |
|
38 | 38 | |
|
39 | 39 | //*********** |
|
40 | 40 | // RTEMS TASK |
|
41 | 41 | |
|
42 | 42 | rtems_task actn_task( rtems_task_argument unused ) |
|
43 | 43 | { |
|
44 | 44 | /** This RTEMS task is responsible for launching actions upton the reception of valid TeleCommands. |
|
45 | 45 | * |
|
46 | 46 | * @param unused is the starting argument of the RTEMS task |
|
47 | 47 | * |
|
48 | 48 | * The ACTN task waits for data coming from an RTEMS msesage queue. When data arrives, it launches specific actions depending |
|
49 | 49 | * on the incoming TeleCommand. |
|
50 | 50 | * |
|
51 | 51 | */ |
|
52 | 52 | |
|
53 | 53 | int result; |
|
54 | 54 | rtems_status_code status; // RTEMS status code |
|
55 | 55 | ccsdsTelecommandPacket_t __attribute__((aligned(4))) TC; // TC sent to the ACTN task |
|
56 | 56 | size_t size; // size of the incoming TC packet |
|
57 | 57 | unsigned char subtype; // subtype of the current TC packet |
|
58 | 58 | unsigned char time[BYTES_PER_TIME]; |
|
59 | 59 | rtems_id queue_rcv_id; |
|
60 | 60 | rtems_id queue_snd_id; |
|
61 | 61 | |
|
62 | 62 | memset(&TC, 0, sizeof(ccsdsTelecommandPacket_t)); |
|
63 | 63 | size = 0; |
|
64 | 64 | queue_rcv_id = RTEMS_ID_NONE; |
|
65 | 65 | queue_snd_id = RTEMS_ID_NONE; |
|
66 | 66 | |
|
67 | 67 | status = get_message_queue_id_recv( &queue_rcv_id ); |
|
68 | 68 | if (status != RTEMS_SUCCESSFUL) |
|
69 | 69 | { |
|
70 | 70 | PRINTF1("in ACTN *** ERR get_message_queue_id_recv %d\n", status) |
|
71 | 71 | } |
|
72 | 72 | |
|
73 | 73 | status = get_message_queue_id_send( &queue_snd_id ); |
|
74 | 74 | if (status != RTEMS_SUCCESSFUL) |
|
75 | 75 | { |
|
76 | 76 | PRINTF1("in ACTN *** ERR get_message_queue_id_send %d\n", status) |
|
77 | 77 | } |
|
78 | 78 | |
|
79 | 79 | result = LFR_SUCCESSFUL; |
|
80 | 80 | subtype = 0; // subtype of the current TC packet |
|
81 | 81 | |
|
82 | 82 | BOOT_PRINTF("in ACTN *** \n"); |
|
83 | 83 | |
|
84 | 84 | while(1) |
|
85 | 85 | { |
|
86 | 86 | status = rtems_message_queue_receive( queue_rcv_id, (char*) &TC, &size, |
|
87 | 87 | RTEMS_WAIT, RTEMS_NO_TIMEOUT); |
|
88 | 88 | getTime( time ); // set time to the current time |
|
89 | 89 | if (status!=RTEMS_SUCCESSFUL) |
|
90 | 90 | { |
|
91 | 91 | PRINTF1("ERR *** in task ACTN *** error receiving a message, code %d \n", status) |
|
92 | 92 | } |
|
93 | 93 | else |
|
94 | 94 | { |
|
95 | 95 | subtype = TC.serviceSubType; |
|
96 | 96 | switch(subtype) |
|
97 | 97 | { |
|
98 | 98 | case TC_SUBTYPE_RESET: |
|
99 | 99 | result = action_reset( &TC, queue_snd_id, time ); |
|
100 | 100 | close_action( &TC, result, queue_snd_id ); |
|
101 | 101 | break; |
|
102 | 102 | case TC_SUBTYPE_LOAD_COMM: |
|
103 | 103 | result = action_load_common_par( &TC ); |
|
104 | 104 | close_action( &TC, result, queue_snd_id ); |
|
105 | 105 | break; |
|
106 | 106 | case TC_SUBTYPE_LOAD_NORM: |
|
107 | 107 | result = action_load_normal_par( &TC, queue_snd_id, time ); |
|
108 | 108 | close_action( &TC, result, queue_snd_id ); |
|
109 | 109 | break; |
|
110 | 110 | case TC_SUBTYPE_LOAD_BURST: |
|
111 | 111 | result = action_load_burst_par( &TC, queue_snd_id, time ); |
|
112 | 112 | close_action( &TC, result, queue_snd_id ); |
|
113 | 113 | break; |
|
114 | 114 | case TC_SUBTYPE_LOAD_SBM1: |
|
115 | 115 | result = action_load_sbm1_par( &TC, queue_snd_id, time ); |
|
116 | 116 | close_action( &TC, result, queue_snd_id ); |
|
117 | 117 | break; |
|
118 | 118 | case TC_SUBTYPE_LOAD_SBM2: |
|
119 | 119 | result = action_load_sbm2_par( &TC, queue_snd_id, time ); |
|
120 | 120 | close_action( &TC, result, queue_snd_id ); |
|
121 | 121 | break; |
|
122 | 122 | case TC_SUBTYPE_DUMP: |
|
123 | 123 | result = action_dump_par( &TC, queue_snd_id ); |
|
124 | 124 | close_action( &TC, result, queue_snd_id ); |
|
125 | 125 | break; |
|
126 | 126 | case TC_SUBTYPE_ENTER: |
|
127 | 127 | result = action_enter_mode( &TC, queue_snd_id ); |
|
128 | 128 | close_action( &TC, result, queue_snd_id ); |
|
129 | 129 | break; |
|
130 | 130 | case TC_SUBTYPE_UPDT_INFO: |
|
131 | 131 | result = action_update_info( &TC, queue_snd_id ); |
|
132 | 132 | close_action( &TC, result, queue_snd_id ); |
|
133 | 133 | break; |
|
134 | 134 | case TC_SUBTYPE_EN_CAL: |
|
135 | 135 | result = action_enable_calibration( &TC, queue_snd_id, time ); |
|
136 | 136 | close_action( &TC, result, queue_snd_id ); |
|
137 | 137 | break; |
|
138 | 138 | case TC_SUBTYPE_DIS_CAL: |
|
139 | 139 | result = action_disable_calibration( &TC, queue_snd_id, time ); |
|
140 | 140 | close_action( &TC, result, queue_snd_id ); |
|
141 | 141 | break; |
|
142 | 142 | case TC_SUBTYPE_LOAD_K: |
|
143 | 143 | result = action_load_kcoefficients( &TC, queue_snd_id, time ); |
|
144 | 144 | close_action( &TC, result, queue_snd_id ); |
|
145 | 145 | break; |
|
146 | 146 | case TC_SUBTYPE_DUMP_K: |
|
147 | 147 | result = action_dump_kcoefficients( &TC, queue_snd_id, time ); |
|
148 | 148 | close_action( &TC, result, queue_snd_id ); |
|
149 | 149 | break; |
|
150 | 150 | case TC_SUBTYPE_LOAD_FBINS: |
|
151 | 151 | result = action_load_fbins_mask( &TC, queue_snd_id, time ); |
|
152 | 152 | close_action( &TC, result, queue_snd_id ); |
|
153 | 153 | break; |
|
154 | 154 | case TC_SUBTYPE_LOAD_FILTER_PAR: |
|
155 | 155 | result = action_load_filter_par( &TC, queue_snd_id, time ); |
|
156 | 156 | close_action( &TC, result, queue_snd_id ); |
|
157 | 157 | break; |
|
158 | 158 | case TC_SUBTYPE_UPDT_TIME: |
|
159 | 159 | result = action_update_time( &TC ); |
|
160 | 160 | close_action( &TC, result, queue_snd_id ); |
|
161 | 161 | break; |
|
162 | 162 | default: |
|
163 | 163 | break; |
|
164 | 164 | } |
|
165 | 165 | } |
|
166 | 166 | } |
|
167 | 167 | } |
|
168 | 168 | |
|
169 | 169 | //*********** |
|
170 | 170 | // TC ACTIONS |
|
171 | 171 | |
|
172 | 172 | int action_reset(ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time) |
|
173 | 173 | { |
|
174 | 174 | /** This function executes specific actions when a TC_LFR_RESET TeleCommand has been received. |
|
175 | 175 | * |
|
176 | 176 | * @param TC points to the TeleCommand packet that is being processed |
|
177 | 177 | * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver |
|
178 | 178 | * |
|
179 | 179 | */ |
|
180 | 180 | |
|
181 | 181 | PRINTF("this is the end!!!\n"); |
|
182 | 182 | #ifdef GCOV_ENABLED |
|
183 | 183 | #ifndef GCOV_USE_EXIT |
|
184 | 184 | extern void gcov_exit (void); |
|
185 | 185 | gcov_exit(); |
|
186 | 186 | #endif |
|
187 | 187 | #endif |
|
188 | 188 | exit(0); |
|
189 | 189 | |
|
190 | #ifdef ENABLE_DEAD_CODE | |
|
190 | 191 | send_tm_lfr_tc_exe_not_implemented( TC, queue_id, time ); |
|
192 | #endif | |
|
191 | 193 | |
|
192 | 194 | return LFR_DEFAULT; |
|
193 | 195 | } |
|
194 | 196 | |
|
195 | 197 | int action_enter_mode(ccsdsTelecommandPacket_t *TC, rtems_id queue_id ) |
|
196 | 198 | { |
|
197 | 199 | /** This function executes specific actions when a TC_LFR_ENTER_MODE TeleCommand has been received. |
|
198 | 200 | * |
|
199 | 201 | * @param TC points to the TeleCommand packet that is being processed |
|
200 | 202 | * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver |
|
201 | 203 | * |
|
202 | 204 | */ |
|
203 | 205 | |
|
204 | 206 | rtems_status_code status; |
|
205 | 207 | unsigned char requestedMode; |
|
206 | 208 | unsigned int transitionCoarseTime; |
|
207 | 209 | unsigned char * bytePosPtr; |
|
208 | 210 | |
|
209 | 211 | bytePosPtr = (unsigned char *) &TC->packetID; |
|
210 | 212 | requestedMode = bytePosPtr[ BYTE_POS_CP_MODE_LFR_SET ]; |
|
211 | 213 | copyInt32ByChar( (char*) &transitionCoarseTime, &bytePosPtr[ BYTE_POS_CP_LFR_ENTER_MODE_TIME ] ); |
|
212 | 214 | transitionCoarseTime = transitionCoarseTime & COARSE_TIME_MASK; |
|
213 | 215 | status = check_mode_value( requestedMode ); |
|
214 | 216 | |
|
215 | 217 | if ( status != LFR_SUCCESSFUL ) // the mode value is inconsistent |
|
216 | 218 | { |
|
217 | 219 | send_tm_lfr_tc_exe_inconsistent( TC, queue_id, BYTE_POS_CP_MODE_LFR_SET, requestedMode ); |
|
218 | 220 | } |
|
219 | 221 | |
|
220 | 222 | else // the mode value is valid, check the transition |
|
221 | 223 | { |
|
222 | 224 | status = check_mode_transition(requestedMode); |
|
223 | 225 | if (status != LFR_SUCCESSFUL) |
|
224 | 226 | { |
|
225 | 227 | PRINTF("ERR *** in action_enter_mode *** check_mode_transition\n") |
|
226 | 228 | send_tm_lfr_tc_exe_not_executable( TC, queue_id ); |
|
227 | 229 | } |
|
228 | 230 | } |
|
229 | 231 | |
|
230 | 232 | if ( status == LFR_SUCCESSFUL ) // the transition is valid, check the date |
|
231 | 233 | { |
|
232 | 234 | status = check_transition_date( transitionCoarseTime ); |
|
233 | 235 | if (status != LFR_SUCCESSFUL) |
|
234 | 236 | { |
|
235 | 237 | PRINTF("ERR *** in action_enter_mode *** check_transition_date\n"); |
|
236 | 238 | send_tm_lfr_tc_exe_not_executable(TC, queue_id ); |
|
237 | 239 | } |
|
238 | 240 | } |
|
239 | 241 | |
|
240 | 242 | if ( status == LFR_SUCCESSFUL ) // the date is valid, enter the mode |
|
241 | 243 | { |
|
242 | 244 | PRINTF1("OK *** in action_enter_mode *** enter mode %d\n", requestedMode); |
|
243 | 245 | |
|
244 | 246 | switch(requestedMode) |
|
245 | 247 | { |
|
246 | 248 | case LFR_MODE_STANDBY: |
|
247 | 249 | status = enter_mode_standby(); |
|
248 | 250 | break; |
|
249 | 251 | case LFR_MODE_NORMAL: |
|
250 | 252 | status = enter_mode_normal( transitionCoarseTime ); |
|
251 | 253 | break; |
|
252 | 254 | case LFR_MODE_BURST: |
|
253 | 255 | status = enter_mode_burst( transitionCoarseTime ); |
|
254 | 256 | break; |
|
255 | 257 | case LFR_MODE_SBM1: |
|
256 | 258 | status = enter_mode_sbm1( transitionCoarseTime ); |
|
257 | 259 | break; |
|
258 | 260 | case LFR_MODE_SBM2: |
|
259 | 261 | status = enter_mode_sbm2( transitionCoarseTime ); |
|
260 | 262 | break; |
|
261 | 263 | default: |
|
262 | 264 | break; |
|
263 | 265 | } |
|
264 | 266 | |
|
265 | 267 | if (status != RTEMS_SUCCESSFUL) |
|
266 | 268 | { |
|
267 | 269 | status = LFR_EXE_ERROR; |
|
268 | 270 | } |
|
269 | 271 | } |
|
270 | 272 | |
|
271 | 273 | return status; |
|
272 | 274 | } |
|
273 | 275 | |
|
274 | 276 | int action_update_info(ccsdsTelecommandPacket_t *TC, rtems_id queue_id) |
|
275 | 277 | { |
|
276 | 278 | /** This function executes specific actions when a TC_LFR_UPDATE_INFO TeleCommand has been received. |
|
277 | 279 | * |
|
278 | 280 | * @param TC points to the TeleCommand packet that is being processed |
|
279 | 281 | * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver |
|
280 | 282 | * |
|
281 | 283 | * @return LFR directive status code: |
|
282 | 284 | * - LFR_DEFAULT |
|
283 | 285 | * - LFR_SUCCESSFUL |
|
284 | 286 | * |
|
285 | 287 | */ |
|
286 | 288 | |
|
287 | 289 | unsigned int val; |
|
288 | 290 | unsigned int status; |
|
289 | 291 | unsigned char mode; |
|
290 | 292 | unsigned char * bytePosPtr; |
|
291 | 293 | int pos; |
|
292 | 294 | float value; |
|
293 | 295 | |
|
294 | 296 | pos = INIT_CHAR; |
|
295 | 297 | value = INIT_FLOAT; |
|
296 | 298 | |
|
297 | 299 | status = LFR_DEFAULT; |
|
298 | 300 | |
|
299 | 301 | bytePosPtr = (unsigned char *) &TC->packetID; |
|
300 | 302 | |
|
301 | 303 | // check LFR mode |
|
302 | 304 | mode = (bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET5 ] & BITS_LFR_MODE) >> SHIFT_LFR_MODE; |
|
303 | 305 | status = check_update_info_hk_lfr_mode( mode ); |
|
304 | 306 | if (status == LFR_SUCCESSFUL) // check TDS mode |
|
305 | 307 | { |
|
306 | 308 | mode = (bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET6 ] & BITS_TDS_MODE) >> SHIFT_TDS_MODE; |
|
307 | 309 | status = check_update_info_hk_tds_mode( mode ); |
|
308 | 310 | } |
|
309 | 311 | if (status == LFR_SUCCESSFUL) // check THR mode |
|
310 | 312 | { |
|
311 | 313 | mode = (bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET6 ] & BITS_THR_MODE); |
|
312 | 314 | status = check_update_info_hk_thr_mode( mode ); |
|
313 | 315 | } |
|
314 | 316 | if (status == LFR_SUCCESSFUL) // check reaction wheels frequencies |
|
315 | 317 | { |
|
316 | 318 | status = check_all_sy_lfr_rw_f(TC, &pos, &value); |
|
317 | 319 | } |
|
318 | 320 | |
|
319 | 321 | // if the parameters checking succeeds, udpate all parameters |
|
320 | 322 | if (status == LFR_SUCCESSFUL) |
|
321 | 323 | { |
|
322 | 324 | // pa_bia_status_info |
|
323 | 325 | // => pa_bia_mode_mux_set 3 bits |
|
324 | 326 | // => pa_bia_mode_hv_enabled 1 bit |
|
325 | 327 | // => pa_bia_mode_bias1_enabled 1 bit |
|
326 | 328 | // => pa_bia_mode_bias2_enabled 1 bit |
|
327 | 329 | // => pa_bia_mode_bias3_enabled 1 bit |
|
328 | 330 | // => pa_bia_on_off (cp_dpu_bias_on_off) |
|
329 | 331 | pa_bia_status_info = bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET2 ] & BITS_BIA; // [1111 1110] |
|
330 | 332 | pa_bia_status_info = pa_bia_status_info |
|
331 | 333 | | (bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET1 ] & 1); |
|
332 | 334 | |
|
333 | 335 | // REACTION_WHEELS_FREQUENCY, copy the incoming parameters in the local variable (to be copied in HK packets) |
|
334 | 336 | getReactionWheelsFrequencies( TC ); |
|
335 | 337 | set_hk_lfr_sc_rw_f_flags(); |
|
336 | 338 | build_sy_lfr_rw_masks(); |
|
337 | 339 | |
|
338 | 340 | // once the masks are built, they have to be merged with the fbins_mask |
|
339 | 341 | merge_fbins_masks(); |
|
340 | 342 | |
|
341 | 343 | // increase the TC_LFR_UPDATE_INFO counter |
|
342 | 344 | if (status == LFR_SUCCESSFUL) // if the parameter check is successful |
|
343 | 345 | { |
|
344 | 346 | val = (housekeeping_packet.hk_lfr_update_info_tc_cnt[0] * CONST_256) |
|
345 | 347 | + housekeeping_packet.hk_lfr_update_info_tc_cnt[1]; |
|
346 | 348 | val++; |
|
347 | 349 | housekeeping_packet.hk_lfr_update_info_tc_cnt[0] = (unsigned char) (val >> SHIFT_1_BYTE); |
|
348 | 350 | housekeeping_packet.hk_lfr_update_info_tc_cnt[1] = (unsigned char) (val); |
|
349 | 351 | } |
|
350 | 352 | } |
|
351 | 353 | |
|
352 | 354 | return status; |
|
353 | 355 | } |
|
354 | 356 | |
|
355 | 357 | int action_enable_calibration(ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time) |
|
356 | 358 | { |
|
357 | 359 | /** This function executes specific actions when a TC_LFR_ENABLE_CALIBRATION TeleCommand has been received. |
|
358 | 360 | * |
|
359 | 361 | * @param TC points to the TeleCommand packet that is being processed |
|
360 | 362 | * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver |
|
361 | 363 | * |
|
362 | 364 | */ |
|
363 | 365 | |
|
364 | 366 | int result; |
|
365 | 367 | |
|
366 | 368 | result = LFR_DEFAULT; |
|
367 | 369 | |
|
368 | 370 | setCalibration( true ); |
|
369 | 371 | |
|
370 | 372 | result = LFR_SUCCESSFUL; |
|
371 | 373 | |
|
372 | 374 | return result; |
|
373 | 375 | } |
|
374 | 376 | |
|
375 | 377 | int action_disable_calibration(ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time) |
|
376 | 378 | { |
|
377 | 379 | /** This function executes specific actions when a TC_LFR_DISABLE_CALIBRATION TeleCommand has been received. |
|
378 | 380 | * |
|
379 | 381 | * @param TC points to the TeleCommand packet that is being processed |
|
380 | 382 | * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver |
|
381 | 383 | * |
|
382 | 384 | */ |
|
383 | 385 | |
|
384 | 386 | int result; |
|
385 | 387 | |
|
386 | 388 | result = LFR_DEFAULT; |
|
387 | 389 | |
|
388 | 390 | setCalibration( false ); |
|
389 | 391 | |
|
390 | 392 | result = LFR_SUCCESSFUL; |
|
391 | 393 | |
|
392 | 394 | return result; |
|
393 | 395 | } |
|
394 | 396 | |
|
395 | 397 | int action_update_time(ccsdsTelecommandPacket_t *TC) |
|
396 | 398 | { |
|
397 | 399 | /** This function executes specific actions when a TC_LFR_UPDATE_TIME TeleCommand has been received. |
|
398 | 400 | * |
|
399 | 401 | * @param TC points to the TeleCommand packet that is being processed |
|
400 | 402 | * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver |
|
401 | 403 | * |
|
402 | 404 | * @return LFR_SUCCESSFUL |
|
403 | 405 | * |
|
404 | 406 | */ |
|
405 | 407 | |
|
406 | 408 | unsigned int val; |
|
407 | 409 | |
|
408 | 410 | time_management_regs->coarse_time_load = (TC->dataAndCRC[BYTE_0] << SHIFT_3_BYTES) |
|
409 | 411 | + (TC->dataAndCRC[BYTE_1] << SHIFT_2_BYTES) |
|
410 | 412 | + (TC->dataAndCRC[BYTE_2] << SHIFT_1_BYTE) |
|
411 | 413 | + TC->dataAndCRC[BYTE_3]; |
|
412 | 414 | |
|
413 | 415 | val = (housekeeping_packet.hk_lfr_update_time_tc_cnt[0] * CONST_256) |
|
414 | 416 | + housekeeping_packet.hk_lfr_update_time_tc_cnt[1]; |
|
415 | 417 | val++; |
|
416 | 418 | housekeeping_packet.hk_lfr_update_time_tc_cnt[0] = (unsigned char) (val >> SHIFT_1_BYTE); |
|
417 | 419 | housekeeping_packet.hk_lfr_update_time_tc_cnt[1] = (unsigned char) (val); |
|
418 | 420 | |
|
419 | 421 | oneTcLfrUpdateTimeReceived = 1; |
|
420 | 422 | |
|
421 | 423 | return LFR_SUCCESSFUL; |
|
422 | 424 | } |
|
423 | 425 | |
|
424 | 426 | //******************* |
|
425 | 427 | // ENTERING THE MODES |
|
426 | 428 | int check_mode_value( unsigned char requestedMode ) |
|
427 | 429 | { |
|
428 | 430 | int status; |
|
429 | 431 | |
|
430 | 432 | status = LFR_DEFAULT; |
|
431 | 433 | |
|
432 | 434 | if ( (requestedMode != LFR_MODE_STANDBY) |
|
433 | 435 | && (requestedMode != LFR_MODE_NORMAL) && (requestedMode != LFR_MODE_BURST) |
|
434 | 436 | && (requestedMode != LFR_MODE_SBM1) && (requestedMode != LFR_MODE_SBM2) ) |
|
435 | 437 | { |
|
436 | 438 | status = LFR_DEFAULT; |
|
437 | 439 | } |
|
438 | 440 | else |
|
439 | 441 | { |
|
440 | 442 | status = LFR_SUCCESSFUL; |
|
441 | 443 | } |
|
442 | 444 | |
|
443 | 445 | return status; |
|
444 | 446 | } |
|
445 | 447 | |
|
446 | 448 | int check_mode_transition( unsigned char requestedMode ) |
|
447 | 449 | { |
|
448 | 450 | /** This function checks the validity of the transition requested by the TC_LFR_ENTER_MODE. |
|
449 | 451 | * |
|
450 | 452 | * @param requestedMode is the mode requested by the TC_LFR_ENTER_MODE |
|
451 | 453 | * |
|
452 | 454 | * @return LFR directive status codes: |
|
453 | 455 | * - LFR_SUCCESSFUL - the transition is authorized |
|
454 | 456 | * - LFR_DEFAULT - the transition is not authorized |
|
455 | 457 | * |
|
456 | 458 | */ |
|
457 | 459 | |
|
458 | 460 | int status; |
|
459 | 461 | |
|
460 | 462 | switch (requestedMode) |
|
461 | 463 | { |
|
462 | 464 | case LFR_MODE_STANDBY: |
|
463 | 465 | if ( lfrCurrentMode == LFR_MODE_STANDBY ) { |
|
464 | 466 | status = LFR_DEFAULT; |
|
465 | 467 | } |
|
466 | 468 | else |
|
467 | 469 | { |
|
468 | 470 | status = LFR_SUCCESSFUL; |
|
469 | 471 | } |
|
470 | 472 | break; |
|
471 | 473 | case LFR_MODE_NORMAL: |
|
472 | 474 | if ( lfrCurrentMode == LFR_MODE_NORMAL ) { |
|
473 | 475 | status = LFR_DEFAULT; |
|
474 | 476 | } |
|
475 | 477 | else { |
|
476 | 478 | status = LFR_SUCCESSFUL; |
|
477 | 479 | } |
|
478 | 480 | break; |
|
479 | 481 | case LFR_MODE_BURST: |
|
480 | 482 | if ( lfrCurrentMode == LFR_MODE_BURST ) { |
|
481 | 483 | status = LFR_DEFAULT; |
|
482 | 484 | } |
|
483 | 485 | else { |
|
484 | 486 | status = LFR_SUCCESSFUL; |
|
485 | 487 | } |
|
486 | 488 | break; |
|
487 | 489 | case LFR_MODE_SBM1: |
|
488 | 490 | if ( lfrCurrentMode == LFR_MODE_SBM1 ) { |
|
489 | 491 | status = LFR_DEFAULT; |
|
490 | 492 | } |
|
491 | 493 | else { |
|
492 | 494 | status = LFR_SUCCESSFUL; |
|
493 | 495 | } |
|
494 | 496 | break; |
|
495 | 497 | case LFR_MODE_SBM2: |
|
496 | 498 | if ( lfrCurrentMode == LFR_MODE_SBM2 ) { |
|
497 | 499 | status = LFR_DEFAULT; |
|
498 | 500 | } |
|
499 | 501 | else { |
|
500 | 502 | status = LFR_SUCCESSFUL; |
|
501 | 503 | } |
|
502 | 504 | break; |
|
503 | 505 | default: |
|
504 | 506 | status = LFR_DEFAULT; |
|
505 | 507 | break; |
|
506 | 508 | } |
|
507 | 509 | |
|
508 | 510 | return status; |
|
509 | 511 | } |
|
510 | 512 | |
|
511 | 513 | void update_last_valid_transition_date( unsigned int transitionCoarseTime ) |
|
512 | 514 | { |
|
513 | 515 | if (transitionCoarseTime == 0) |
|
514 | 516 | { |
|
515 | 517 | lastValidEnterModeTime = time_management_regs->coarse_time + 1; |
|
516 | 518 | PRINTF1("lastValidEnterModeTime = 0x%x (transitionCoarseTime = 0 => coarse_time+1)\n", lastValidEnterModeTime); |
|
517 | 519 | } |
|
518 | 520 | else |
|
519 | 521 | { |
|
520 | 522 | lastValidEnterModeTime = transitionCoarseTime; |
|
521 | 523 | PRINTF1("lastValidEnterModeTime = 0x%x\n", transitionCoarseTime); |
|
522 | 524 | } |
|
523 | 525 | } |
|
524 | 526 | |
|
525 | 527 | int check_transition_date( unsigned int transitionCoarseTime ) |
|
526 | 528 | { |
|
527 | 529 | int status; |
|
528 | 530 | unsigned int localCoarseTime; |
|
529 | 531 | unsigned int deltaCoarseTime; |
|
530 | 532 | |
|
531 | 533 | status = LFR_SUCCESSFUL; |
|
532 | 534 | |
|
533 | 535 | if (transitionCoarseTime == 0) // transition time = 0 means an instant transition |
|
534 | 536 | { |
|
535 | 537 | status = LFR_SUCCESSFUL; |
|
536 | 538 | } |
|
537 | 539 | else |
|
538 | 540 | { |
|
539 | 541 | localCoarseTime = time_management_regs->coarse_time & COARSE_TIME_MASK; |
|
540 | 542 | |
|
541 | 543 | PRINTF2("localTime = %x, transitionTime = %x\n", localCoarseTime, transitionCoarseTime); |
|
542 | 544 | |
|
543 | 545 | if ( transitionCoarseTime <= localCoarseTime ) // SSS-CP-EQS-322 |
|
544 | 546 | { |
|
545 | 547 | status = LFR_DEFAULT; |
|
546 | 548 | PRINTF("ERR *** in check_transition_date *** transitionCoarseTime <= localCoarseTime\n"); |
|
547 | 549 | } |
|
548 | 550 | |
|
549 | 551 | if (status == LFR_SUCCESSFUL) |
|
550 | 552 | { |
|
551 | 553 | deltaCoarseTime = transitionCoarseTime - localCoarseTime; |
|
552 | 554 | if ( deltaCoarseTime > MAX_DELTA_COARSE_TIME ) // SSS-CP-EQS-323 |
|
553 | 555 | { |
|
554 | 556 | status = LFR_DEFAULT; |
|
555 | 557 | PRINTF1("ERR *** in check_transition_date *** deltaCoarseTime = %x\n", deltaCoarseTime) |
|
556 | 558 | } |
|
557 | 559 | } |
|
558 | 560 | } |
|
559 | 561 | |
|
560 | 562 | return status; |
|
561 | 563 | } |
|
562 | 564 | |
|
563 | 565 | int restart_asm_activities( unsigned char lfrRequestedMode ) |
|
564 | 566 | { |
|
565 | 567 | rtems_status_code status; |
|
566 | 568 | |
|
567 | 569 | status = stop_spectral_matrices(); |
|
568 | 570 | |
|
569 | 571 | thisIsAnASMRestart = 1; |
|
570 | 572 | |
|
571 | 573 | status = restart_asm_tasks( lfrRequestedMode ); |
|
572 | 574 | |
|
573 | 575 | launch_spectral_matrix(); |
|
574 | 576 | |
|
575 | 577 | return status; |
|
576 | 578 | } |
|
577 | 579 | |
|
578 | 580 | int stop_spectral_matrices( void ) |
|
579 | 581 | { |
|
580 | 582 | /** This function stops and restarts the current mode average spectral matrices activities. |
|
581 | 583 | * |
|
582 | 584 | * @return RTEMS directive status codes: |
|
583 | 585 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
584 | 586 | * - RTEMS_INVALID_ID - task id invalid |
|
585 | 587 | * - RTEMS_ALREADY_SUSPENDED - task already suspended |
|
586 | 588 | * |
|
587 | 589 | */ |
|
588 | 590 | |
|
589 | 591 | rtems_status_code status; |
|
590 | 592 | |
|
591 | 593 | status = RTEMS_SUCCESSFUL; |
|
592 | 594 | |
|
593 | 595 | // (1) mask interruptions |
|
594 | 596 | LEON_Mask_interrupt( IRQ_SPECTRAL_MATRIX ); // mask spectral matrix interrupt |
|
595 | 597 | |
|
596 | 598 | // (2) reset spectral matrices registers |
|
597 | 599 | set_sm_irq_onNewMatrix( 0 ); // stop the spectral matrices |
|
598 | 600 | reset_sm_status(); |
|
599 | 601 | |
|
600 | 602 | // (3) clear interruptions |
|
601 | 603 | LEON_Clear_interrupt( IRQ_SPECTRAL_MATRIX ); // clear spectral matrix interrupt |
|
602 | 604 | |
|
603 | 605 | // suspend several tasks |
|
604 | 606 | if (lfrCurrentMode != LFR_MODE_STANDBY) { |
|
605 | 607 | status = suspend_asm_tasks(); |
|
606 | 608 | } |
|
607 | 609 | |
|
608 | 610 | if (status != RTEMS_SUCCESSFUL) |
|
609 | 611 | { |
|
610 | 612 | PRINTF1("in stop_current_mode *** in suspend_science_tasks *** ERR code: %d\n", status) |
|
611 | 613 | } |
|
612 | 614 | |
|
613 | 615 | return status; |
|
614 | 616 | } |
|
615 | 617 | |
|
616 | 618 | int stop_current_mode( void ) |
|
617 | 619 | { |
|
618 | 620 | /** This function stops the current mode by masking interrupt lines and suspending science tasks. |
|
619 | 621 | * |
|
620 | 622 | * @return RTEMS directive status codes: |
|
621 | 623 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
622 | 624 | * - RTEMS_INVALID_ID - task id invalid |
|
623 | 625 | * - RTEMS_ALREADY_SUSPENDED - task already suspended |
|
624 | 626 | * |
|
625 | 627 | */ |
|
626 | 628 | |
|
627 | 629 | rtems_status_code status; |
|
628 | 630 | |
|
629 | 631 | status = RTEMS_SUCCESSFUL; |
|
630 | 632 | |
|
631 | 633 | // (1) mask interruptions |
|
632 | 634 | LEON_Mask_interrupt( IRQ_WAVEFORM_PICKER ); // mask waveform picker interrupt |
|
633 | 635 | LEON_Mask_interrupt( IRQ_SPECTRAL_MATRIX ); // clear spectral matrix interrupt |
|
634 | 636 | |
|
635 | 637 | // (2) reset waveform picker registers |
|
636 | 638 | reset_wfp_burst_enable(); // reset burst and enable bits |
|
637 | 639 | reset_wfp_status(); // reset all the status bits |
|
638 | 640 | |
|
639 | 641 | // (3) reset spectral matrices registers |
|
640 | 642 | set_sm_irq_onNewMatrix( 0 ); // stop the spectral matrices |
|
641 | 643 | reset_sm_status(); |
|
642 | 644 | |
|
643 | 645 | // reset lfr VHDL module |
|
644 | 646 | reset_lfr(); |
|
645 | 647 | |
|
646 | 648 | reset_extractSWF(); // reset the extractSWF flag to false |
|
647 | 649 | |
|
648 | 650 | // (4) clear interruptions |
|
649 | 651 | LEON_Clear_interrupt( IRQ_WAVEFORM_PICKER ); // clear waveform picker interrupt |
|
650 | 652 | LEON_Clear_interrupt( IRQ_SPECTRAL_MATRIX ); // clear spectral matrix interrupt |
|
651 | 653 | |
|
652 | 654 | // suspend several tasks |
|
653 | 655 | if (lfrCurrentMode != LFR_MODE_STANDBY) { |
|
654 | 656 | status = suspend_science_tasks(); |
|
655 | 657 | } |
|
656 | 658 | |
|
657 | 659 | if (status != RTEMS_SUCCESSFUL) |
|
658 | 660 | { |
|
659 | 661 | PRINTF1("in stop_current_mode *** in suspend_science_tasks *** ERR code: %d\n", status) |
|
660 | 662 | } |
|
661 | 663 | |
|
662 | 664 | return status; |
|
663 | 665 | } |
|
664 | 666 | |
|
665 | 667 | int enter_mode_standby( void ) |
|
666 | 668 | { |
|
667 | 669 | /** This function is used to put LFR in the STANDBY mode. |
|
668 | 670 | * |
|
669 | 671 | * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE |
|
670 | 672 | * |
|
671 | 673 | * @return RTEMS directive status codes: |
|
672 | 674 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
673 | 675 | * - RTEMS_INVALID_ID - task id invalid |
|
674 | 676 | * - RTEMS_INCORRECT_STATE - task never started |
|
675 | 677 | * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task |
|
676 | 678 | * |
|
677 | 679 | * The STANDBY mode does not depends on a specific transition date, the effect of the TC_LFR_ENTER_MODE |
|
678 | 680 | * is immediate. |
|
679 | 681 | * |
|
680 | 682 | */ |
|
681 | 683 | |
|
682 | 684 | int status; |
|
683 | 685 | |
|
684 | 686 | status = stop_current_mode(); // STOP THE CURRENT MODE |
|
685 | 687 | |
|
686 | 688 | #ifdef PRINT_TASK_STATISTICS |
|
687 | 689 | rtems_cpu_usage_report(); |
|
688 | 690 | #endif |
|
689 | 691 | |
|
690 | 692 | #ifdef PRINT_STACK_REPORT |
|
691 | 693 | PRINTF("stack report selected\n") |
|
692 | 694 | rtems_stack_checker_report_usage(); |
|
693 | 695 | #endif |
|
694 | 696 | |
|
695 | 697 | return status; |
|
696 | 698 | } |
|
697 | 699 | |
|
698 | 700 | int enter_mode_normal( unsigned int transitionCoarseTime ) |
|
699 | 701 | { |
|
700 | 702 | /** This function is used to start the NORMAL mode. |
|
701 | 703 | * |
|
702 | 704 | * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE |
|
703 | 705 | * |
|
704 | 706 | * @return RTEMS directive status codes: |
|
705 | 707 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
706 | 708 | * - RTEMS_INVALID_ID - task id invalid |
|
707 | 709 | * - RTEMS_INCORRECT_STATE - task never started |
|
708 | 710 | * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task |
|
709 | 711 | * |
|
710 | 712 | * The way the NORMAL mode is started depends on the LFR current mode. If LFR is in SBM1 or SBM2, |
|
711 | 713 | * the snapshots are not restarted, only ASM, BP and CWF data generation are affected. |
|
712 | 714 | * |
|
713 | 715 | */ |
|
714 | 716 | |
|
715 | 717 | int status; |
|
716 | 718 | |
|
717 | 719 | #ifdef PRINT_TASK_STATISTICS |
|
718 | 720 | rtems_cpu_usage_reset(); |
|
719 | 721 | #endif |
|
720 | 722 | |
|
721 | 723 | status = RTEMS_UNSATISFIED; |
|
722 | 724 | |
|
723 | 725 | switch( lfrCurrentMode ) |
|
724 | 726 | { |
|
725 | 727 | case LFR_MODE_STANDBY: |
|
726 | 728 | status = restart_science_tasks( LFR_MODE_NORMAL ); // restart science tasks |
|
727 | 729 | if (status == RTEMS_SUCCESSFUL) // relaunch spectral_matrix and waveform_picker modules |
|
728 | 730 | { |
|
729 | 731 | launch_spectral_matrix( ); |
|
730 | 732 | launch_waveform_picker( LFR_MODE_NORMAL, transitionCoarseTime ); |
|
731 | 733 | } |
|
732 | 734 | break; |
|
733 | 735 | case LFR_MODE_BURST: |
|
734 | 736 | status = stop_current_mode(); // stop the current mode |
|
735 | 737 | status = restart_science_tasks( LFR_MODE_NORMAL ); // restart the science tasks |
|
736 | 738 | if (status == RTEMS_SUCCESSFUL) // relaunch spectral_matrix and waveform_picker modules |
|
737 | 739 | { |
|
738 | 740 | launch_spectral_matrix( ); |
|
739 | 741 | launch_waveform_picker( LFR_MODE_NORMAL, transitionCoarseTime ); |
|
740 | 742 | } |
|
741 | 743 | break; |
|
742 | 744 | case LFR_MODE_SBM1: |
|
743 | 745 | status = restart_asm_activities( LFR_MODE_NORMAL ); // this is necessary to restart ASM tasks to update the parameters |
|
744 | 746 | status = LFR_SUCCESSFUL; // lfrCurrentMode will be updated after the execution of close_action |
|
745 | 747 | update_last_valid_transition_date( transitionCoarseTime ); |
|
746 | 748 | break; |
|
747 | 749 | case LFR_MODE_SBM2: |
|
748 | 750 | status = restart_asm_activities( LFR_MODE_NORMAL ); // this is necessary to restart ASM tasks to update the parameters |
|
749 | 751 | status = LFR_SUCCESSFUL; // lfrCurrentMode will be updated after the execution of close_action |
|
750 | 752 | update_last_valid_transition_date( transitionCoarseTime ); |
|
751 | 753 | break; |
|
752 | 754 | default: |
|
753 | 755 | break; |
|
754 | 756 | } |
|
755 | 757 | |
|
756 | 758 | if (status != RTEMS_SUCCESSFUL) |
|
757 | 759 | { |
|
758 | 760 | PRINTF1("ERR *** in enter_mode_normal *** status = %d\n", status) |
|
759 | 761 | status = RTEMS_UNSATISFIED; |
|
760 | 762 | } |
|
761 | 763 | |
|
762 | 764 | return status; |
|
763 | 765 | } |
|
764 | 766 | |
|
765 | 767 | int enter_mode_burst( unsigned int transitionCoarseTime ) |
|
766 | 768 | { |
|
767 | 769 | /** This function is used to start the BURST mode. |
|
768 | 770 | * |
|
769 | 771 | * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE |
|
770 | 772 | * |
|
771 | 773 | * @return RTEMS directive status codes: |
|
772 | 774 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
773 | 775 | * - RTEMS_INVALID_ID - task id invalid |
|
774 | 776 | * - RTEMS_INCORRECT_STATE - task never started |
|
775 | 777 | * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task |
|
776 | 778 | * |
|
777 | 779 | * The way the BURST mode is started does not depend on the LFR current mode. |
|
778 | 780 | * |
|
779 | 781 | */ |
|
780 | 782 | |
|
781 | 783 | |
|
782 | 784 | int status; |
|
783 | 785 | |
|
784 | 786 | #ifdef PRINT_TASK_STATISTICS |
|
785 | 787 | rtems_cpu_usage_reset(); |
|
786 | 788 | #endif |
|
787 | 789 | |
|
788 | 790 | status = stop_current_mode(); // stop the current mode |
|
789 | 791 | status = restart_science_tasks( LFR_MODE_BURST ); // restart the science tasks |
|
790 | 792 | if (status == RTEMS_SUCCESSFUL) // relaunch spectral_matrix and waveform_picker modules |
|
791 | 793 | { |
|
792 | 794 | launch_spectral_matrix( ); |
|
793 | 795 | launch_waveform_picker( LFR_MODE_BURST, transitionCoarseTime ); |
|
794 | 796 | } |
|
795 | 797 | |
|
796 | 798 | if (status != RTEMS_SUCCESSFUL) |
|
797 | 799 | { |
|
798 | 800 | PRINTF1("ERR *** in enter_mode_burst *** status = %d\n", status) |
|
799 | 801 | status = RTEMS_UNSATISFIED; |
|
800 | 802 | } |
|
801 | 803 | |
|
802 | 804 | return status; |
|
803 | 805 | } |
|
804 | 806 | |
|
805 | 807 | int enter_mode_sbm1( unsigned int transitionCoarseTime ) |
|
806 | 808 | { |
|
807 | 809 | /** This function is used to start the SBM1 mode. |
|
808 | 810 | * |
|
809 | 811 | * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE |
|
810 | 812 | * |
|
811 | 813 | * @return RTEMS directive status codes: |
|
812 | 814 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
813 | 815 | * - RTEMS_INVALID_ID - task id invalid |
|
814 | 816 | * - RTEMS_INCORRECT_STATE - task never started |
|
815 | 817 | * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task |
|
816 | 818 | * |
|
817 | 819 | * The way the SBM1 mode is started depends on the LFR current mode. If LFR is in NORMAL or SBM2, |
|
818 | 820 | * the snapshots are not restarted, only ASM, BP and CWF data generation are affected. In other |
|
819 | 821 | * cases, the acquisition is completely restarted. |
|
820 | 822 | * |
|
821 | 823 | */ |
|
822 | 824 | |
|
823 | 825 | int status; |
|
824 | 826 | |
|
825 | 827 | #ifdef PRINT_TASK_STATISTICS |
|
826 | 828 | rtems_cpu_usage_reset(); |
|
827 | 829 | #endif |
|
828 | 830 | |
|
829 | 831 | status = RTEMS_UNSATISFIED; |
|
830 | 832 | |
|
831 | 833 | switch( lfrCurrentMode ) |
|
832 | 834 | { |
|
833 | 835 | case LFR_MODE_STANDBY: |
|
834 | 836 | status = restart_science_tasks( LFR_MODE_SBM1 ); // restart science tasks |
|
835 | 837 | if (status == RTEMS_SUCCESSFUL) // relaunch spectral_matrix and waveform_picker modules |
|
836 | 838 | { |
|
837 | 839 | launch_spectral_matrix( ); |
|
838 | 840 | launch_waveform_picker( LFR_MODE_SBM1, transitionCoarseTime ); |
|
839 | 841 | } |
|
840 | 842 | break; |
|
841 | 843 | case LFR_MODE_NORMAL: // lfrCurrentMode will be updated after the execution of close_action |
|
842 | 844 | status = restart_asm_activities( LFR_MODE_SBM1 ); |
|
843 | 845 | status = LFR_SUCCESSFUL; |
|
844 | 846 | update_last_valid_transition_date( transitionCoarseTime ); |
|
845 | 847 | break; |
|
846 | 848 | case LFR_MODE_BURST: |
|
847 | 849 | status = stop_current_mode(); // stop the current mode |
|
848 | 850 | status = restart_science_tasks( LFR_MODE_SBM1 ); // restart the science tasks |
|
849 | 851 | if (status == RTEMS_SUCCESSFUL) // relaunch spectral_matrix and waveform_picker modules |
|
850 | 852 | { |
|
851 | 853 | launch_spectral_matrix( ); |
|
852 | 854 | launch_waveform_picker( LFR_MODE_SBM1, transitionCoarseTime ); |
|
853 | 855 | } |
|
854 | 856 | break; |
|
855 | 857 | case LFR_MODE_SBM2: |
|
856 | 858 | status = restart_asm_activities( LFR_MODE_SBM1 ); |
|
857 | 859 | status = LFR_SUCCESSFUL; // lfrCurrentMode will be updated after the execution of close_action |
|
858 | 860 | update_last_valid_transition_date( transitionCoarseTime ); |
|
859 | 861 | break; |
|
860 | 862 | default: |
|
861 | 863 | break; |
|
862 | 864 | } |
|
863 | 865 | |
|
864 | 866 | if (status != RTEMS_SUCCESSFUL) |
|
865 | 867 | { |
|
866 | 868 | PRINTF1("ERR *** in enter_mode_sbm1 *** status = %d\n", status); |
|
867 | 869 | status = RTEMS_UNSATISFIED; |
|
868 | 870 | } |
|
869 | 871 | |
|
870 | 872 | return status; |
|
871 | 873 | } |
|
872 | 874 | |
|
873 | 875 | int enter_mode_sbm2( unsigned int transitionCoarseTime ) |
|
874 | 876 | { |
|
875 | 877 | /** This function is used to start the SBM2 mode. |
|
876 | 878 | * |
|
877 | 879 | * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE |
|
878 | 880 | * |
|
879 | 881 | * @return RTEMS directive status codes: |
|
880 | 882 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
881 | 883 | * - RTEMS_INVALID_ID - task id invalid |
|
882 | 884 | * - RTEMS_INCORRECT_STATE - task never started |
|
883 | 885 | * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task |
|
884 | 886 | * |
|
885 | 887 | * The way the SBM2 mode is started depends on the LFR current mode. If LFR is in NORMAL or SBM1, |
|
886 | 888 | * the snapshots are not restarted, only ASM, BP and CWF data generation are affected. In other |
|
887 | 889 | * cases, the acquisition is completely restarted. |
|
888 | 890 | * |
|
889 | 891 | */ |
|
890 | 892 | |
|
891 | 893 | int status; |
|
892 | 894 | |
|
893 | 895 | #ifdef PRINT_TASK_STATISTICS |
|
894 | 896 | rtems_cpu_usage_reset(); |
|
895 | 897 | #endif |
|
896 | 898 | |
|
897 | 899 | status = RTEMS_UNSATISFIED; |
|
898 | 900 | |
|
899 | 901 | switch( lfrCurrentMode ) |
|
900 | 902 | { |
|
901 | 903 | case LFR_MODE_STANDBY: |
|
902 | 904 | status = restart_science_tasks( LFR_MODE_SBM2 ); // restart science tasks |
|
903 | 905 | if (status == RTEMS_SUCCESSFUL) // relaunch spectral_matrix and waveform_picker modules |
|
904 | 906 | { |
|
905 | 907 | launch_spectral_matrix( ); |
|
906 | 908 | launch_waveform_picker( LFR_MODE_SBM2, transitionCoarseTime ); |
|
907 | 909 | } |
|
908 | 910 | break; |
|
909 | 911 | case LFR_MODE_NORMAL: |
|
910 | 912 | status = restart_asm_activities( LFR_MODE_SBM2 ); |
|
911 | 913 | status = LFR_SUCCESSFUL; // lfrCurrentMode will be updated after the execution of close_action |
|
912 | 914 | update_last_valid_transition_date( transitionCoarseTime ); |
|
913 | 915 | break; |
|
914 | 916 | case LFR_MODE_BURST: |
|
915 | 917 | status = stop_current_mode(); // stop the current mode |
|
916 | 918 | status = restart_science_tasks( LFR_MODE_SBM2 ); // restart the science tasks |
|
917 | 919 | if (status == RTEMS_SUCCESSFUL) // relaunch spectral_matrix and waveform_picker modules |
|
918 | 920 | { |
|
919 | 921 | launch_spectral_matrix( ); |
|
920 | 922 | launch_waveform_picker( LFR_MODE_SBM2, transitionCoarseTime ); |
|
921 | 923 | } |
|
922 | 924 | break; |
|
923 | 925 | case LFR_MODE_SBM1: |
|
924 | 926 | status = restart_asm_activities( LFR_MODE_SBM2 ); |
|
925 | 927 | status = LFR_SUCCESSFUL; // lfrCurrentMode will be updated after the execution of close_action |
|
926 | 928 | update_last_valid_transition_date( transitionCoarseTime ); |
|
927 | 929 | break; |
|
928 | 930 | default: |
|
929 | 931 | break; |
|
930 | 932 | } |
|
931 | 933 | |
|
932 | 934 | if (status != RTEMS_SUCCESSFUL) |
|
933 | 935 | { |
|
934 | 936 | PRINTF1("ERR *** in enter_mode_sbm2 *** status = %d\n", status) |
|
935 | 937 | status = RTEMS_UNSATISFIED; |
|
936 | 938 | } |
|
937 | 939 | |
|
938 | 940 | return status; |
|
939 | 941 | } |
|
940 | 942 | |
|
941 | 943 | int restart_science_tasks( unsigned char lfrRequestedMode ) |
|
942 | 944 | { |
|
943 | 945 | /** This function is used to restart all science tasks. |
|
944 | 946 | * |
|
945 | 947 | * @return RTEMS directive status codes: |
|
946 | 948 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
947 | 949 | * - RTEMS_INVALID_ID - task id invalid |
|
948 | 950 | * - RTEMS_INCORRECT_STATE - task never started |
|
949 | 951 | * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task |
|
950 | 952 | * |
|
951 | 953 | * Science tasks are AVF0, PRC0, WFRM, CWF3, CW2, CWF1 |
|
952 | 954 | * |
|
953 | 955 | */ |
|
954 | 956 | |
|
955 | 957 | rtems_status_code status[NB_SCIENCE_TASKS]; |
|
956 | 958 | rtems_status_code ret; |
|
957 | 959 | |
|
958 | 960 | ret = RTEMS_SUCCESSFUL; |
|
959 | 961 | |
|
960 | 962 | status[STATUS_0] = rtems_task_restart( Task_id[TASKID_AVF0], lfrRequestedMode ); |
|
961 | 963 | if (status[STATUS_0] != RTEMS_SUCCESSFUL) |
|
962 | 964 | { |
|
963 | 965 | PRINTF1("in restart_science_task *** AVF0 ERR %d\n", status[STATUS_0]) |
|
964 | 966 | } |
|
965 | 967 | |
|
966 | 968 | status[STATUS_1] = rtems_task_restart( Task_id[TASKID_PRC0], lfrRequestedMode ); |
|
967 | 969 | if (status[STATUS_1] != RTEMS_SUCCESSFUL) |
|
968 | 970 | { |
|
969 | 971 | PRINTF1("in restart_science_task *** PRC0 ERR %d\n", status[STATUS_1]) |
|
970 | 972 | } |
|
971 | 973 | |
|
972 | 974 | status[STATUS_2] = rtems_task_restart( Task_id[TASKID_WFRM],1 ); |
|
973 | 975 | if (status[STATUS_2] != RTEMS_SUCCESSFUL) |
|
974 | 976 | { |
|
975 | 977 | PRINTF1("in restart_science_task *** WFRM ERR %d\n", status[STATUS_2]) |
|
976 | 978 | } |
|
977 | 979 | |
|
978 | 980 | status[STATUS_3] = rtems_task_restart( Task_id[TASKID_CWF3],1 ); |
|
979 | 981 | if (status[STATUS_3] != RTEMS_SUCCESSFUL) |
|
980 | 982 | { |
|
981 | 983 | PRINTF1("in restart_science_task *** CWF3 ERR %d\n", status[STATUS_3]) |
|
982 | 984 | } |
|
983 | 985 | |
|
984 | 986 | status[STATUS_4] = rtems_task_restart( Task_id[TASKID_CWF2],1 ); |
|
985 | 987 | if (status[STATUS_4] != RTEMS_SUCCESSFUL) |
|
986 | 988 | { |
|
987 | 989 | PRINTF1("in restart_science_task *** CWF2 ERR %d\n", status[STATUS_4]) |
|
988 | 990 | } |
|
989 | 991 | |
|
990 | 992 | status[STATUS_5] = rtems_task_restart( Task_id[TASKID_CWF1],1 ); |
|
991 | 993 | if (status[STATUS_5] != RTEMS_SUCCESSFUL) |
|
992 | 994 | { |
|
993 | 995 | PRINTF1("in restart_science_task *** CWF1 ERR %d\n", status[STATUS_5]) |
|
994 | 996 | } |
|
995 | 997 | |
|
996 | 998 | status[STATUS_6] = rtems_task_restart( Task_id[TASKID_AVF1], lfrRequestedMode ); |
|
997 | 999 | if (status[STATUS_6] != RTEMS_SUCCESSFUL) |
|
998 | 1000 | { |
|
999 | 1001 | PRINTF1("in restart_science_task *** AVF1 ERR %d\n", status[STATUS_6]) |
|
1000 | 1002 | } |
|
1001 | 1003 | |
|
1002 | 1004 | status[STATUS_7] = rtems_task_restart( Task_id[TASKID_PRC1],lfrRequestedMode ); |
|
1003 | 1005 | if (status[STATUS_7] != RTEMS_SUCCESSFUL) |
|
1004 | 1006 | { |
|
1005 | 1007 | PRINTF1("in restart_science_task *** PRC1 ERR %d\n", status[STATUS_7]) |
|
1006 | 1008 | } |
|
1007 | 1009 | |
|
1008 | 1010 | status[STATUS_8] = rtems_task_restart( Task_id[TASKID_AVF2], 1 ); |
|
1009 | 1011 | if (status[STATUS_8] != RTEMS_SUCCESSFUL) |
|
1010 | 1012 | { |
|
1011 | 1013 | PRINTF1("in restart_science_task *** AVF2 ERR %d\n", status[STATUS_8]) |
|
1012 | 1014 | } |
|
1013 | 1015 | |
|
1014 | 1016 | status[STATUS_9] = rtems_task_restart( Task_id[TASKID_PRC2], 1 ); |
|
1015 | 1017 | if (status[STATUS_9] != RTEMS_SUCCESSFUL) |
|
1016 | 1018 | { |
|
1017 | 1019 | PRINTF1("in restart_science_task *** PRC2 ERR %d\n", status[STATUS_9]) |
|
1018 | 1020 | } |
|
1019 | 1021 | |
|
1020 | 1022 | if ( (status[STATUS_0] != RTEMS_SUCCESSFUL) || (status[STATUS_1] != RTEMS_SUCCESSFUL) || |
|
1021 | 1023 | (status[STATUS_2] != RTEMS_SUCCESSFUL) || (status[STATUS_3] != RTEMS_SUCCESSFUL) || |
|
1022 | 1024 | (status[STATUS_4] != RTEMS_SUCCESSFUL) || (status[STATUS_5] != RTEMS_SUCCESSFUL) || |
|
1023 | 1025 | (status[STATUS_6] != RTEMS_SUCCESSFUL) || (status[STATUS_7] != RTEMS_SUCCESSFUL) || |
|
1024 | 1026 | (status[STATUS_8] != RTEMS_SUCCESSFUL) || (status[STATUS_9] != RTEMS_SUCCESSFUL) ) |
|
1025 | 1027 | { |
|
1026 | 1028 | ret = RTEMS_UNSATISFIED; |
|
1027 | 1029 | } |
|
1028 | 1030 | |
|
1029 | 1031 | return ret; |
|
1030 | 1032 | } |
|
1031 | 1033 | |
|
1032 | 1034 | int restart_asm_tasks( unsigned char lfrRequestedMode ) |
|
1033 | 1035 | { |
|
1034 | 1036 | /** This function is used to restart average spectral matrices tasks. |
|
1035 | 1037 | * |
|
1036 | 1038 | * @return RTEMS directive status codes: |
|
1037 | 1039 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
1038 | 1040 | * - RTEMS_INVALID_ID - task id invalid |
|
1039 | 1041 | * - RTEMS_INCORRECT_STATE - task never started |
|
1040 | 1042 | * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task |
|
1041 | 1043 | * |
|
1042 | 1044 | * ASM tasks are AVF0, PRC0, AVF1, PRC1, AVF2 and PRC2 |
|
1043 | 1045 | * |
|
1044 | 1046 | */ |
|
1045 | 1047 | |
|
1046 | 1048 | rtems_status_code status[NB_ASM_TASKS]; |
|
1047 | 1049 | rtems_status_code ret; |
|
1048 | 1050 | |
|
1049 | 1051 | ret = RTEMS_SUCCESSFUL; |
|
1050 | 1052 | |
|
1051 | 1053 | status[STATUS_0] = rtems_task_restart( Task_id[TASKID_AVF0], lfrRequestedMode ); |
|
1052 | 1054 | if (status[STATUS_0] != RTEMS_SUCCESSFUL) |
|
1053 | 1055 | { |
|
1054 | 1056 | PRINTF1("in restart_science_task *** AVF0 ERR %d\n", status[STATUS_0]) |
|
1055 | 1057 | } |
|
1056 | 1058 | |
|
1057 | 1059 | status[STATUS_1] = rtems_task_restart( Task_id[TASKID_PRC0], lfrRequestedMode ); |
|
1058 | 1060 | if (status[STATUS_1] != RTEMS_SUCCESSFUL) |
|
1059 | 1061 | { |
|
1060 | 1062 | PRINTF1("in restart_science_task *** PRC0 ERR %d\n", status[STATUS_1]) |
|
1061 | 1063 | } |
|
1062 | 1064 | |
|
1063 | 1065 | status[STATUS_2] = rtems_task_restart( Task_id[TASKID_AVF1], lfrRequestedMode ); |
|
1064 | 1066 | if (status[STATUS_2] != RTEMS_SUCCESSFUL) |
|
1065 | 1067 | { |
|
1066 | 1068 | PRINTF1("in restart_science_task *** AVF1 ERR %d\n", status[STATUS_2]) |
|
1067 | 1069 | } |
|
1068 | 1070 | |
|
1069 | 1071 | status[STATUS_3] = rtems_task_restart( Task_id[TASKID_PRC1],lfrRequestedMode ); |
|
1070 | 1072 | if (status[STATUS_3] != RTEMS_SUCCESSFUL) |
|
1071 | 1073 | { |
|
1072 | 1074 | PRINTF1("in restart_science_task *** PRC1 ERR %d\n", status[STATUS_3]) |
|
1073 | 1075 | } |
|
1074 | 1076 | |
|
1075 | 1077 | status[STATUS_4] = rtems_task_restart( Task_id[TASKID_AVF2], 1 ); |
|
1076 | 1078 | if (status[STATUS_4] != RTEMS_SUCCESSFUL) |
|
1077 | 1079 | { |
|
1078 | 1080 | PRINTF1("in restart_science_task *** AVF2 ERR %d\n", status[STATUS_4]) |
|
1079 | 1081 | } |
|
1080 | 1082 | |
|
1081 | 1083 | status[STATUS_5] = rtems_task_restart( Task_id[TASKID_PRC2], 1 ); |
|
1082 | 1084 | if (status[STATUS_5] != RTEMS_SUCCESSFUL) |
|
1083 | 1085 | { |
|
1084 | 1086 | PRINTF1("in restart_science_task *** PRC2 ERR %d\n", status[STATUS_5]) |
|
1085 | 1087 | } |
|
1086 | 1088 | |
|
1087 | 1089 | if ( (status[STATUS_0] != RTEMS_SUCCESSFUL) || (status[STATUS_1] != RTEMS_SUCCESSFUL) || |
|
1088 | 1090 | (status[STATUS_2] != RTEMS_SUCCESSFUL) || (status[STATUS_3] != RTEMS_SUCCESSFUL) || |
|
1089 | 1091 | (status[STATUS_4] != RTEMS_SUCCESSFUL) || (status[STATUS_5] != RTEMS_SUCCESSFUL) ) |
|
1090 | 1092 | { |
|
1091 | 1093 | ret = RTEMS_UNSATISFIED; |
|
1092 | 1094 | } |
|
1093 | 1095 | |
|
1094 | 1096 | return ret; |
|
1095 | 1097 | } |
|
1096 | 1098 | |
|
1097 | 1099 | int suspend_science_tasks( void ) |
|
1098 | 1100 | { |
|
1099 | 1101 | /** This function suspends the science tasks. |
|
1100 | 1102 | * |
|
1101 | 1103 | * @return RTEMS directive status codes: |
|
1102 | 1104 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
1103 | 1105 | * - RTEMS_INVALID_ID - task id invalid |
|
1104 | 1106 | * - RTEMS_ALREADY_SUSPENDED - task already suspended |
|
1105 | 1107 | * |
|
1106 | 1108 | */ |
|
1107 | 1109 | |
|
1108 | 1110 | rtems_status_code status; |
|
1109 | 1111 | |
|
1110 | 1112 | PRINTF("in suspend_science_tasks\n") |
|
1111 | 1113 | |
|
1112 | 1114 | status = rtems_task_suspend( Task_id[TASKID_AVF0] ); // suspend AVF0 |
|
1113 | 1115 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1114 | 1116 | { |
|
1115 | 1117 | PRINTF1("in suspend_science_task *** AVF0 ERR %d\n", status) |
|
1116 | 1118 | } |
|
1117 | 1119 | else |
|
1118 | 1120 | { |
|
1119 | 1121 | status = RTEMS_SUCCESSFUL; |
|
1120 | 1122 | } |
|
1121 | 1123 | if (status == RTEMS_SUCCESSFUL) // suspend PRC0 |
|
1122 | 1124 | { |
|
1123 | 1125 | status = rtems_task_suspend( Task_id[TASKID_PRC0] ); |
|
1124 | 1126 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1125 | 1127 | { |
|
1126 | 1128 | PRINTF1("in suspend_science_task *** PRC0 ERR %d\n", status) |
|
1127 | 1129 | } |
|
1128 | 1130 | else |
|
1129 | 1131 | { |
|
1130 | 1132 | status = RTEMS_SUCCESSFUL; |
|
1131 | 1133 | } |
|
1132 | 1134 | } |
|
1133 | 1135 | if (status == RTEMS_SUCCESSFUL) // suspend AVF1 |
|
1134 | 1136 | { |
|
1135 | 1137 | status = rtems_task_suspend( Task_id[TASKID_AVF1] ); |
|
1136 | 1138 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1137 | 1139 | { |
|
1138 | 1140 | PRINTF1("in suspend_science_task *** AVF1 ERR %d\n", status) |
|
1139 | 1141 | } |
|
1140 | 1142 | else |
|
1141 | 1143 | { |
|
1142 | 1144 | status = RTEMS_SUCCESSFUL; |
|
1143 | 1145 | } |
|
1144 | 1146 | } |
|
1145 | 1147 | if (status == RTEMS_SUCCESSFUL) // suspend PRC1 |
|
1146 | 1148 | { |
|
1147 | 1149 | status = rtems_task_suspend( Task_id[TASKID_PRC1] ); |
|
1148 | 1150 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1149 | 1151 | { |
|
1150 | 1152 | PRINTF1("in suspend_science_task *** PRC1 ERR %d\n", status) |
|
1151 | 1153 | } |
|
1152 | 1154 | else |
|
1153 | 1155 | { |
|
1154 | 1156 | status = RTEMS_SUCCESSFUL; |
|
1155 | 1157 | } |
|
1156 | 1158 | } |
|
1157 | 1159 | if (status == RTEMS_SUCCESSFUL) // suspend AVF2 |
|
1158 | 1160 | { |
|
1159 | 1161 | status = rtems_task_suspend( Task_id[TASKID_AVF2] ); |
|
1160 | 1162 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1161 | 1163 | { |
|
1162 | 1164 | PRINTF1("in suspend_science_task *** AVF2 ERR %d\n", status) |
|
1163 | 1165 | } |
|
1164 | 1166 | else |
|
1165 | 1167 | { |
|
1166 | 1168 | status = RTEMS_SUCCESSFUL; |
|
1167 | 1169 | } |
|
1168 | 1170 | } |
|
1169 | 1171 | if (status == RTEMS_SUCCESSFUL) // suspend PRC2 |
|
1170 | 1172 | { |
|
1171 | 1173 | status = rtems_task_suspend( Task_id[TASKID_PRC2] ); |
|
1172 | 1174 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1173 | 1175 | { |
|
1174 | 1176 | PRINTF1("in suspend_science_task *** PRC2 ERR %d\n", status) |
|
1175 | 1177 | } |
|
1176 | 1178 | else |
|
1177 | 1179 | { |
|
1178 | 1180 | status = RTEMS_SUCCESSFUL; |
|
1179 | 1181 | } |
|
1180 | 1182 | } |
|
1181 | 1183 | if (status == RTEMS_SUCCESSFUL) // suspend WFRM |
|
1182 | 1184 | { |
|
1183 | 1185 | status = rtems_task_suspend( Task_id[TASKID_WFRM] ); |
|
1184 | 1186 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1185 | 1187 | { |
|
1186 | 1188 | PRINTF1("in suspend_science_task *** WFRM ERR %d\n", status) |
|
1187 | 1189 | } |
|
1188 | 1190 | else |
|
1189 | 1191 | { |
|
1190 | 1192 | status = RTEMS_SUCCESSFUL; |
|
1191 | 1193 | } |
|
1192 | 1194 | } |
|
1193 | 1195 | if (status == RTEMS_SUCCESSFUL) // suspend CWF3 |
|
1194 | 1196 | { |
|
1195 | 1197 | status = rtems_task_suspend( Task_id[TASKID_CWF3] ); |
|
1196 | 1198 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1197 | 1199 | { |
|
1198 | 1200 | PRINTF1("in suspend_science_task *** CWF3 ERR %d\n", status) |
|
1199 | 1201 | } |
|
1200 | 1202 | else |
|
1201 | 1203 | { |
|
1202 | 1204 | status = RTEMS_SUCCESSFUL; |
|
1203 | 1205 | } |
|
1204 | 1206 | } |
|
1205 | 1207 | if (status == RTEMS_SUCCESSFUL) // suspend CWF2 |
|
1206 | 1208 | { |
|
1207 | 1209 | status = rtems_task_suspend( Task_id[TASKID_CWF2] ); |
|
1208 | 1210 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1209 | 1211 | { |
|
1210 | 1212 | PRINTF1("in suspend_science_task *** CWF2 ERR %d\n", status) |
|
1211 | 1213 | } |
|
1212 | 1214 | else |
|
1213 | 1215 | { |
|
1214 | 1216 | status = RTEMS_SUCCESSFUL; |
|
1215 | 1217 | } |
|
1216 | 1218 | } |
|
1217 | 1219 | if (status == RTEMS_SUCCESSFUL) // suspend CWF1 |
|
1218 | 1220 | { |
|
1219 | 1221 | status = rtems_task_suspend( Task_id[TASKID_CWF1] ); |
|
1220 | 1222 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1221 | 1223 | { |
|
1222 | 1224 | PRINTF1("in suspend_science_task *** CWF1 ERR %d\n", status) |
|
1223 | 1225 | } |
|
1224 | 1226 | else |
|
1225 | 1227 | { |
|
1226 | 1228 | status = RTEMS_SUCCESSFUL; |
|
1227 | 1229 | } |
|
1228 | 1230 | } |
|
1229 | 1231 | |
|
1230 | 1232 | return status; |
|
1231 | 1233 | } |
|
1232 | 1234 | |
|
1233 | 1235 | int suspend_asm_tasks( void ) |
|
1234 | 1236 | { |
|
1235 | 1237 | /** This function suspends the science tasks. |
|
1236 | 1238 | * |
|
1237 | 1239 | * @return RTEMS directive status codes: |
|
1238 | 1240 | * - RTEMS_SUCCESSFUL - task restarted successfully |
|
1239 | 1241 | * - RTEMS_INVALID_ID - task id invalid |
|
1240 | 1242 | * - RTEMS_ALREADY_SUSPENDED - task already suspended |
|
1241 | 1243 | * |
|
1242 | 1244 | */ |
|
1243 | 1245 | |
|
1244 | 1246 | rtems_status_code status; |
|
1245 | 1247 | |
|
1246 | 1248 | PRINTF("in suspend_science_tasks\n") |
|
1247 | 1249 | |
|
1248 | 1250 | status = rtems_task_suspend( Task_id[TASKID_AVF0] ); // suspend AVF0 |
|
1249 | 1251 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1250 | 1252 | { |
|
1251 | 1253 | PRINTF1("in suspend_science_task *** AVF0 ERR %d\n", status) |
|
1252 | 1254 | } |
|
1253 | 1255 | else |
|
1254 | 1256 | { |
|
1255 | 1257 | status = RTEMS_SUCCESSFUL; |
|
1256 | 1258 | } |
|
1257 | 1259 | |
|
1258 | 1260 | if (status == RTEMS_SUCCESSFUL) // suspend PRC0 |
|
1259 | 1261 | { |
|
1260 | 1262 | status = rtems_task_suspend( Task_id[TASKID_PRC0] ); |
|
1261 | 1263 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1262 | 1264 | { |
|
1263 | 1265 | PRINTF1("in suspend_science_task *** PRC0 ERR %d\n", status) |
|
1264 | 1266 | } |
|
1265 | 1267 | else |
|
1266 | 1268 | { |
|
1267 | 1269 | status = RTEMS_SUCCESSFUL; |
|
1268 | 1270 | } |
|
1269 | 1271 | } |
|
1270 | 1272 | |
|
1271 | 1273 | if (status == RTEMS_SUCCESSFUL) // suspend AVF1 |
|
1272 | 1274 | { |
|
1273 | 1275 | status = rtems_task_suspend( Task_id[TASKID_AVF1] ); |
|
1274 | 1276 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1275 | 1277 | { |
|
1276 | 1278 | PRINTF1("in suspend_science_task *** AVF1 ERR %d\n", status) |
|
1277 | 1279 | } |
|
1278 | 1280 | else |
|
1279 | 1281 | { |
|
1280 | 1282 | status = RTEMS_SUCCESSFUL; |
|
1281 | 1283 | } |
|
1282 | 1284 | } |
|
1283 | 1285 | |
|
1284 | 1286 | if (status == RTEMS_SUCCESSFUL) // suspend PRC1 |
|
1285 | 1287 | { |
|
1286 | 1288 | status = rtems_task_suspend( Task_id[TASKID_PRC1] ); |
|
1287 | 1289 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1288 | 1290 | { |
|
1289 | 1291 | PRINTF1("in suspend_science_task *** PRC1 ERR %d\n", status) |
|
1290 | 1292 | } |
|
1291 | 1293 | else |
|
1292 | 1294 | { |
|
1293 | 1295 | status = RTEMS_SUCCESSFUL; |
|
1294 | 1296 | } |
|
1295 | 1297 | } |
|
1296 | 1298 | |
|
1297 | 1299 | if (status == RTEMS_SUCCESSFUL) // suspend AVF2 |
|
1298 | 1300 | { |
|
1299 | 1301 | status = rtems_task_suspend( Task_id[TASKID_AVF2] ); |
|
1300 | 1302 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1301 | 1303 | { |
|
1302 | 1304 | PRINTF1("in suspend_science_task *** AVF2 ERR %d\n", status) |
|
1303 | 1305 | } |
|
1304 | 1306 | else |
|
1305 | 1307 | { |
|
1306 | 1308 | status = RTEMS_SUCCESSFUL; |
|
1307 | 1309 | } |
|
1308 | 1310 | } |
|
1309 | 1311 | |
|
1310 | 1312 | if (status == RTEMS_SUCCESSFUL) // suspend PRC2 |
|
1311 | 1313 | { |
|
1312 | 1314 | status = rtems_task_suspend( Task_id[TASKID_PRC2] ); |
|
1313 | 1315 | if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED)) |
|
1314 | 1316 | { |
|
1315 | 1317 | PRINTF1("in suspend_science_task *** PRC2 ERR %d\n", status) |
|
1316 | 1318 | } |
|
1317 | 1319 | else |
|
1318 | 1320 | { |
|
1319 | 1321 | status = RTEMS_SUCCESSFUL; |
|
1320 | 1322 | } |
|
1321 | 1323 | } |
|
1322 | 1324 | |
|
1323 | 1325 | return status; |
|
1324 | 1326 | } |
|
1325 | 1327 | |
|
1326 | 1328 | void launch_waveform_picker( unsigned char mode, unsigned int transitionCoarseTime ) |
|
1327 | 1329 | { |
|
1328 | 1330 | |
|
1329 | 1331 | WFP_reset_current_ring_nodes(); |
|
1330 | 1332 | |
|
1331 | 1333 | reset_waveform_picker_regs(); |
|
1332 | 1334 | |
|
1333 | 1335 | set_wfp_burst_enable_register( mode ); |
|
1334 | 1336 | |
|
1335 | 1337 | LEON_Clear_interrupt( IRQ_WAVEFORM_PICKER ); |
|
1336 | 1338 | LEON_Unmask_interrupt( IRQ_WAVEFORM_PICKER ); |
|
1337 | 1339 | |
|
1338 | 1340 | if (transitionCoarseTime == 0) |
|
1339 | 1341 | { |
|
1340 | 1342 | // instant transition means transition on the next valid date |
|
1341 | 1343 | // this is mandatory to have a good snapshot period and a good correction of the snapshot period |
|
1342 | 1344 | waveform_picker_regs->start_date = time_management_regs->coarse_time + 1; |
|
1343 | 1345 | } |
|
1344 | 1346 | else |
|
1345 | 1347 | { |
|
1346 | 1348 | waveform_picker_regs->start_date = transitionCoarseTime; |
|
1347 | 1349 | } |
|
1348 | 1350 | |
|
1349 | 1351 | update_last_valid_transition_date(waveform_picker_regs->start_date); |
|
1350 | 1352 | |
|
1351 | 1353 | } |
|
1352 | 1354 | |
|
1353 | 1355 | void launch_spectral_matrix( void ) |
|
1354 | 1356 | { |
|
1355 | 1357 | SM_reset_current_ring_nodes(); |
|
1356 | 1358 | |
|
1357 | 1359 | reset_spectral_matrix_regs(); |
|
1358 | 1360 | |
|
1359 | 1361 | reset_nb_sm(); |
|
1360 | 1362 | |
|
1361 | 1363 | set_sm_irq_onNewMatrix( 1 ); |
|
1362 | 1364 | |
|
1363 | 1365 | LEON_Clear_interrupt( IRQ_SPECTRAL_MATRIX ); |
|
1364 | 1366 | LEON_Unmask_interrupt( IRQ_SPECTRAL_MATRIX ); |
|
1365 | 1367 | |
|
1366 | 1368 | } |
|
1367 | 1369 | |
|
1368 | 1370 | void set_sm_irq_onNewMatrix( unsigned char value ) |
|
1369 | 1371 | { |
|
1370 | 1372 | if (value == 1) |
|
1371 | 1373 | { |
|
1372 | 1374 | spectral_matrix_regs->config = spectral_matrix_regs->config | BIT_IRQ_ON_NEW_MATRIX; |
|
1373 | 1375 | } |
|
1374 | 1376 | else |
|
1375 | 1377 | { |
|
1376 | 1378 | spectral_matrix_regs->config = spectral_matrix_regs->config & MASK_IRQ_ON_NEW_MATRIX; // 1110 |
|
1377 | 1379 | } |
|
1378 | 1380 | } |
|
1379 | 1381 | |
|
1380 | 1382 | void set_sm_irq_onError( unsigned char value ) |
|
1381 | 1383 | { |
|
1382 | 1384 | if (value == 1) |
|
1383 | 1385 | { |
|
1384 | 1386 | spectral_matrix_regs->config = spectral_matrix_regs->config | BIT_IRQ_ON_ERROR; |
|
1385 | 1387 | } |
|
1386 | 1388 | else |
|
1387 | 1389 | { |
|
1388 | 1390 | spectral_matrix_regs->config = spectral_matrix_regs->config & MASK_IRQ_ON_ERROR; // 1101 |
|
1389 | 1391 | } |
|
1390 | 1392 | } |
|
1391 | 1393 | |
|
1392 | 1394 | //***************************** |
|
1393 | 1395 | // CONFIGURE CALIBRATION SIGNAL |
|
1394 | 1396 | void setCalibrationPrescaler( unsigned int prescaler ) |
|
1395 | 1397 | { |
|
1396 | 1398 | // prescaling of the master clock (25 MHz) |
|
1397 | 1399 | // master clock is divided by 2^prescaler |
|
1398 | 1400 | time_management_regs->calPrescaler = prescaler; |
|
1399 | 1401 | } |
|
1400 | 1402 | |
|
1401 | 1403 | void setCalibrationDivisor( unsigned int divisionFactor ) |
|
1402 | 1404 | { |
|
1403 | 1405 | // division of the prescaled clock by the division factor |
|
1404 | 1406 | time_management_regs->calDivisor = divisionFactor; |
|
1405 | 1407 | } |
|
1406 | 1408 | |
|
1407 | 1409 | void setCalibrationData( void ) |
|
1408 | 1410 | { |
|
1409 | 1411 | /** This function is used to store the values used to drive the DAC in order to generate the SCM calibration signal |
|
1410 | 1412 | * |
|
1411 | 1413 | * @param void |
|
1412 | 1414 | * |
|
1413 | 1415 | * @return void |
|
1414 | 1416 | * |
|
1415 | 1417 | */ |
|
1416 | 1418 | |
|
1417 | 1419 | unsigned int k; |
|
1418 | 1420 | unsigned short data; |
|
1419 | 1421 | float val; |
|
1420 | 1422 | float Ts; |
|
1421 | 1423 | |
|
1422 | 1424 | time_management_regs->calDataPtr = INIT_CHAR; |
|
1423 | 1425 | |
|
1424 | 1426 | Ts = 1 / CAL_FS; |
|
1425 | 1427 | |
|
1426 | 1428 | // build the signal for the SCM calibration |
|
1427 | 1429 | for (k = 0; k < CAL_NB_PTS; k++) |
|
1428 | 1430 | { |
|
1429 | 1431 | val = CAL_A0 * sin( CAL_W0 * k * Ts ) |
|
1430 | 1432 | + CAL_A1 * sin( CAL_W1 * k * Ts ); |
|
1431 | 1433 | data = (unsigned short) ((val * CAL_SCALE_FACTOR) + CONST_2048); |
|
1432 | 1434 | time_management_regs->calData = data & CAL_DATA_MASK; |
|
1433 | 1435 | } |
|
1434 | 1436 | } |
|
1435 | 1437 | |
|
1436 | 1438 | #ifdef ENABLE_DEAD_CODE |
|
1437 | 1439 | void setCalibrationDataInterleaved( void ) |
|
1438 | 1440 | { |
|
1439 | 1441 | /** This function is used to store the values used to drive the DAC in order to generate the SCM calibration signal |
|
1440 | 1442 | * |
|
1441 | 1443 | * @param void |
|
1442 | 1444 | * |
|
1443 | 1445 | * @return void |
|
1444 | 1446 | * |
|
1445 | 1447 | * In interleaved mode, one can store more values than in normal mode. |
|
1446 | 1448 | * The data are stored in bunch of 18 bits, 12 bits from one sample and 6 bits from another sample. |
|
1447 | 1449 | * T store 3 values, one need two write operations. |
|
1448 | 1450 | * s1 [ b11 b10 b9 b8 b7 b6 ] s0 [ b11 b10 b9 b8 b7 b6 b5 b3 b2 b1 b0 ] |
|
1449 | 1451 | * s1 [ b5 b4 b3 b2 b1 b0 ] s2 [ b11 b10 b9 b8 b7 b6 b5 b3 b2 b1 b0 ] |
|
1450 | 1452 | * |
|
1451 | 1453 | */ |
|
1452 | 1454 | |
|
1453 | 1455 | unsigned int k; |
|
1454 | 1456 | float val; |
|
1455 | 1457 | float Ts; |
|
1456 | 1458 | unsigned short data[CAL_NB_PTS_INTER]; |
|
1457 | 1459 | unsigned char *dataPtr; |
|
1458 | 1460 | |
|
1459 | 1461 | Ts = 1 / CAL_FS_INTER; |
|
1460 | 1462 | |
|
1461 | 1463 | time_management_regs->calDataPtr = INIT_CHAR; |
|
1462 | 1464 | |
|
1463 | 1465 | // build the signal for the SCM calibration |
|
1464 | 1466 | for (k=0; k<CAL_NB_PTS_INTER; k++) |
|
1465 | 1467 | { |
|
1466 | 1468 | val = sin( 2 * pi * CAL_F0 * k * Ts ) |
|
1467 | 1469 | + sin( 2 * pi * CAL_F1 * k * Ts ); |
|
1468 | 1470 | data[k] = (unsigned short) ((val * CONST_512) + CONST_2048); |
|
1469 | 1471 | } |
|
1470 | 1472 | |
|
1471 | 1473 | // write the signal in interleaved mode |
|
1472 | 1474 | for (k=0; k < STEPS_FOR_STORAGE_INTER; k++) |
|
1473 | 1475 | { |
|
1474 | 1476 | dataPtr = (unsigned char*) &data[ (k * BYTES_FOR_2_SAMPLES) + 2 ]; |
|
1475 | 1477 | time_management_regs->calData = ( data[ k * BYTES_FOR_2_SAMPLES ] & CAL_DATA_MASK ) |
|
1476 | 1478 | + ( (dataPtr[0] & CAL_DATA_MASK_INTER) << CAL_DATA_SHIFT_INTER); |
|
1477 | 1479 | time_management_regs->calData = ( data[(k * BYTES_FOR_2_SAMPLES) + 1] & CAL_DATA_MASK ) |
|
1478 | 1480 | + ( (dataPtr[1] & CAL_DATA_MASK_INTER) << CAL_DATA_SHIFT_INTER); |
|
1479 | 1481 | } |
|
1480 | 1482 | } |
|
1481 | 1483 | #endif |
|
1482 | 1484 | |
|
1483 | 1485 | void setCalibrationReload( bool state) |
|
1484 | 1486 | { |
|
1485 | 1487 | if (state == true) |
|
1486 | 1488 | { |
|
1487 | 1489 | time_management_regs->calDACCtrl = time_management_regs->calDACCtrl | BIT_CAL_RELOAD; // [0001 0000] |
|
1488 | 1490 | } |
|
1489 | 1491 | else |
|
1490 | 1492 | { |
|
1491 | 1493 | time_management_regs->calDACCtrl = time_management_regs->calDACCtrl & MASK_CAL_RELOAD; // [1110 1111] |
|
1492 | 1494 | } |
|
1493 | 1495 | } |
|
1494 | 1496 | |
|
1495 | 1497 | void setCalibrationEnable( bool state ) |
|
1496 | 1498 | { |
|
1497 | 1499 | // this bit drives the multiplexer |
|
1498 | 1500 | if (state == true) |
|
1499 | 1501 | { |
|
1500 | 1502 | time_management_regs->calDACCtrl = time_management_regs->calDACCtrl | BIT_CAL_ENABLE; // [0100 0000] |
|
1501 | 1503 | } |
|
1502 | 1504 | else |
|
1503 | 1505 | { |
|
1504 | 1506 | time_management_regs->calDACCtrl = time_management_regs->calDACCtrl & MASK_CAL_ENABLE; // [1011 1111] |
|
1505 | 1507 | } |
|
1506 | 1508 | } |
|
1507 | 1509 | |
|
1508 | 1510 | #ifdef ENABLE_DEAD_CODE |
|
1509 | 1511 | void setCalibrationInterleaved( bool state ) |
|
1510 | 1512 | { |
|
1511 | 1513 | // this bit drives the multiplexer |
|
1512 | 1514 | if (state == true) |
|
1513 | 1515 | { |
|
1514 | 1516 | time_management_regs->calDACCtrl = time_management_regs->calDACCtrl | BIT_SET_INTERLEAVED; // [0010 0000] |
|
1515 | 1517 | } |
|
1516 | 1518 | else |
|
1517 | 1519 | { |
|
1518 | 1520 | time_management_regs->calDACCtrl = time_management_regs->calDACCtrl & MASK_SET_INTERLEAVED; // [1101 1111] |
|
1519 | 1521 | } |
|
1520 | 1522 | } |
|
1521 | 1523 | #endif |
|
1522 | 1524 | |
|
1523 | 1525 | void setCalibration( bool state ) |
|
1524 | 1526 | { |
|
1525 | 1527 | if (state == true) |
|
1526 | 1528 | { |
|
1527 | 1529 | setCalibrationEnable( true ); |
|
1528 | 1530 | setCalibrationReload( false ); |
|
1529 | 1531 | set_hk_lfr_calib_enable( true ); |
|
1530 | 1532 | } |
|
1531 | 1533 | else |
|
1532 | 1534 | { |
|
1533 | 1535 | setCalibrationEnable( false ); |
|
1534 | 1536 | setCalibrationReload( true ); |
|
1535 | 1537 | set_hk_lfr_calib_enable( false ); |
|
1536 | 1538 | } |
|
1537 | 1539 | } |
|
1538 | 1540 | |
|
1539 | 1541 | void configureCalibration( bool interleaved ) |
|
1540 | 1542 | { |
|
1541 | 1543 | setCalibration( false ); |
|
1542 | 1544 | #ifdef ENABLE_DEAD_CODE |
|
1543 | 1545 | if ( interleaved == true ) |
|
1544 | 1546 | { |
|
1545 | 1547 | setCalibrationInterleaved( true ); |
|
1546 | 1548 | setCalibrationPrescaler( 0 ); // 25 MHz => 25 000 000 |
|
1547 | 1549 | setCalibrationDivisor( CAL_F_DIVISOR_INTER ); // => 240 384 |
|
1548 | 1550 | setCalibrationDataInterleaved(); |
|
1549 | 1551 | } |
|
1550 | 1552 | else |
|
1551 | 1553 | #endif |
|
1552 | 1554 | { |
|
1553 | 1555 | setCalibrationPrescaler( 0 ); // 25 MHz => 25 000 000 |
|
1554 | 1556 | setCalibrationDivisor( CAL_F_DIVISOR ); // => 160 256 (39 - 1) |
|
1555 | 1557 | setCalibrationData(); |
|
1556 | 1558 | } |
|
1557 | 1559 | } |
|
1558 | 1560 | |
|
1559 | 1561 | //**************** |
|
1560 | 1562 | // CLOSING ACTIONS |
|
1561 | 1563 | void update_last_TC_exe( ccsdsTelecommandPacket_t *TC, unsigned char * time ) |
|
1562 | 1564 | { |
|
1563 | 1565 | /** This function is used to update the HK packets statistics after a successful TC execution. |
|
1564 | 1566 | * |
|
1565 | 1567 | * @param TC points to the TC being processed |
|
1566 | 1568 | * @param time is the time used to date the TC execution |
|
1567 | 1569 | * |
|
1568 | 1570 | */ |
|
1569 | 1571 | |
|
1570 | 1572 | unsigned int val; |
|
1571 | 1573 | |
|
1572 | 1574 | housekeeping_packet.hk_lfr_last_exe_tc_id[0] = TC->packetID[0]; |
|
1573 | 1575 | housekeeping_packet.hk_lfr_last_exe_tc_id[1] = TC->packetID[1]; |
|
1574 | 1576 | housekeeping_packet.hk_lfr_last_exe_tc_type[0] = INIT_CHAR; |
|
1575 | 1577 | housekeeping_packet.hk_lfr_last_exe_tc_type[1] = TC->serviceType; |
|
1576 | 1578 | housekeeping_packet.hk_lfr_last_exe_tc_subtype[0] = INIT_CHAR; |
|
1577 | 1579 | housekeeping_packet.hk_lfr_last_exe_tc_subtype[1] = TC->serviceSubType; |
|
1578 | 1580 | housekeeping_packet.hk_lfr_last_exe_tc_time[BYTE_0] = time[BYTE_0]; |
|
1579 | 1581 | housekeeping_packet.hk_lfr_last_exe_tc_time[BYTE_1] = time[BYTE_1]; |
|
1580 | 1582 | housekeeping_packet.hk_lfr_last_exe_tc_time[BYTE_2] = time[BYTE_2]; |
|
1581 | 1583 | housekeeping_packet.hk_lfr_last_exe_tc_time[BYTE_3] = time[BYTE_3]; |
|
1582 | 1584 | housekeeping_packet.hk_lfr_last_exe_tc_time[BYTE_4] = time[BYTE_4]; |
|
1583 | 1585 | housekeeping_packet.hk_lfr_last_exe_tc_time[BYTE_5] = time[BYTE_5]; |
|
1584 | 1586 | |
|
1585 | 1587 | val = (housekeeping_packet.hk_lfr_exe_tc_cnt[0] * CONST_256) + housekeeping_packet.hk_lfr_exe_tc_cnt[1]; |
|
1586 | 1588 | val++; |
|
1587 | 1589 | housekeeping_packet.hk_lfr_exe_tc_cnt[0] = (unsigned char) (val >> SHIFT_1_BYTE); |
|
1588 | 1590 | housekeeping_packet.hk_lfr_exe_tc_cnt[1] = (unsigned char) (val); |
|
1589 | 1591 | } |
|
1590 | 1592 | |
|
1591 | 1593 | void update_last_TC_rej(ccsdsTelecommandPacket_t *TC, unsigned char * time ) |
|
1592 | 1594 | { |
|
1593 | 1595 | /** This function is used to update the HK packets statistics after a TC rejection. |
|
1594 | 1596 | * |
|
1595 | 1597 | * @param TC points to the TC being processed |
|
1596 | 1598 | * @param time is the time used to date the TC rejection |
|
1597 | 1599 | * |
|
1598 | 1600 | */ |
|
1599 | 1601 | |
|
1600 | 1602 | unsigned int val; |
|
1601 | 1603 | |
|
1602 | 1604 | housekeeping_packet.hk_lfr_last_rej_tc_id[0] = TC->packetID[0]; |
|
1603 | 1605 | housekeeping_packet.hk_lfr_last_rej_tc_id[1] = TC->packetID[1]; |
|
1604 | 1606 | housekeeping_packet.hk_lfr_last_rej_tc_type[0] = INIT_CHAR; |
|
1605 | 1607 | housekeeping_packet.hk_lfr_last_rej_tc_type[1] = TC->serviceType; |
|
1606 | 1608 | housekeeping_packet.hk_lfr_last_rej_tc_subtype[0] = INIT_CHAR; |
|
1607 | 1609 | housekeeping_packet.hk_lfr_last_rej_tc_subtype[1] = TC->serviceSubType; |
|
1608 | 1610 | housekeeping_packet.hk_lfr_last_rej_tc_time[BYTE_0] = time[BYTE_0]; |
|
1609 | 1611 | housekeeping_packet.hk_lfr_last_rej_tc_time[BYTE_1] = time[BYTE_1]; |
|
1610 | 1612 | housekeeping_packet.hk_lfr_last_rej_tc_time[BYTE_2] = time[BYTE_2]; |
|
1611 | 1613 | housekeeping_packet.hk_lfr_last_rej_tc_time[BYTE_3] = time[BYTE_3]; |
|
1612 | 1614 | housekeeping_packet.hk_lfr_last_rej_tc_time[BYTE_4] = time[BYTE_4]; |
|
1613 | 1615 | housekeeping_packet.hk_lfr_last_rej_tc_time[BYTE_5] = time[BYTE_5]; |
|
1614 | 1616 | |
|
1615 | 1617 | val = (housekeeping_packet.hk_lfr_rej_tc_cnt[0] * CONST_256) + housekeeping_packet.hk_lfr_rej_tc_cnt[1]; |
|
1616 | 1618 | val++; |
|
1617 | 1619 | housekeeping_packet.hk_lfr_rej_tc_cnt[0] = (unsigned char) (val >> SHIFT_1_BYTE); |
|
1618 | 1620 | housekeeping_packet.hk_lfr_rej_tc_cnt[1] = (unsigned char) (val); |
|
1619 | 1621 | } |
|
1620 | 1622 | |
|
1621 | 1623 | void close_action(ccsdsTelecommandPacket_t *TC, int result, rtems_id queue_id ) |
|
1622 | 1624 | { |
|
1623 | 1625 | /** This function is the last step of the TC execution workflow. |
|
1624 | 1626 | * |
|
1625 | 1627 | * @param TC points to the TC being processed |
|
1626 | 1628 | * @param result is the result of the TC execution (LFR_SUCCESSFUL / LFR_DEFAULT) |
|
1627 | 1629 | * @param queue_id is the id of the RTEMS message queue used to send TM packets |
|
1628 | 1630 | * @param time is the time used to date the TC execution |
|
1629 | 1631 | * |
|
1630 | 1632 | */ |
|
1631 | 1633 | |
|
1632 | 1634 | unsigned char requestedMode; |
|
1633 | 1635 | |
|
1634 | 1636 | if (result == LFR_SUCCESSFUL) |
|
1635 | 1637 | { |
|
1636 | 1638 | if ( !( (TC->serviceType==TC_TYPE_TIME) & (TC->serviceSubType==TC_SUBTYPE_UPDT_TIME) ) |
|
1637 | 1639 | & |
|
1638 | 1640 | !( (TC->serviceType==TC_TYPE_GEN) & (TC->serviceSubType==TC_SUBTYPE_UPDT_INFO)) |
|
1639 | 1641 | ) |
|
1640 | 1642 | { |
|
1641 | 1643 | send_tm_lfr_tc_exe_success( TC, queue_id ); |
|
1642 | 1644 | } |
|
1643 | 1645 | if ( (TC->serviceType == TC_TYPE_GEN) & (TC->serviceSubType == TC_SUBTYPE_ENTER) ) |
|
1644 | 1646 | { |
|
1645 | 1647 | //********************************** |
|
1646 | 1648 | // UPDATE THE LFRMODE LOCAL VARIABLE |
|
1647 | 1649 | requestedMode = TC->dataAndCRC[1]; |
|
1648 | 1650 | updateLFRCurrentMode( requestedMode ); |
|
1649 | 1651 | } |
|
1650 | 1652 | } |
|
1651 | 1653 | else if (result == LFR_EXE_ERROR) |
|
1652 | 1654 | { |
|
1653 | 1655 | send_tm_lfr_tc_exe_error( TC, queue_id ); |
|
1654 | 1656 | } |
|
1655 | 1657 | } |
|
1656 | 1658 | |
|
1657 | 1659 | //**************** |
|
1658 | 1660 | // OTHER FUNCTIONS |
|
1659 | 1661 | void updateLFRCurrentMode( unsigned char requestedMode ) |
|
1660 | 1662 | { |
|
1661 | 1663 | /** This function updates the value of the global variable lfrCurrentMode. |
|
1662 | 1664 | * |
|
1663 | 1665 | * lfrCurrentMode is a parameter used by several functions to know in which mode LFR is running. |
|
1664 | 1666 | * |
|
1665 | 1667 | */ |
|
1666 | 1668 | |
|
1667 | 1669 | // update the local value of lfrCurrentMode with the value contained in the housekeeping_packet structure |
|
1668 | 1670 | housekeeping_packet.lfr_status_word[0] = (housekeeping_packet.lfr_status_word[0] & STATUS_WORD_LFR_MODE_MASK) |
|
1669 | 1671 | + (unsigned char) ( requestedMode << STATUS_WORD_LFR_MODE_SHIFT ); |
|
1670 | 1672 | lfrCurrentMode = requestedMode; |
|
1671 | 1673 | } |
|
1672 | 1674 | |
|
1673 | 1675 | void set_lfr_soft_reset( unsigned char value ) |
|
1674 | 1676 | { |
|
1675 | 1677 | if (value == 1) |
|
1676 | 1678 | { |
|
1677 | 1679 | time_management_regs->ctrl = time_management_regs->ctrl | BIT_SOFT_RESET; // [0100] |
|
1678 | 1680 | } |
|
1679 | 1681 | else |
|
1680 | 1682 | { |
|
1681 | 1683 | time_management_regs->ctrl = time_management_regs->ctrl & MASK_SOFT_RESET; // [1011] |
|
1682 | 1684 | } |
|
1683 | 1685 | } |
|
1684 | 1686 | |
|
1685 | 1687 | void reset_lfr( void ) |
|
1686 | 1688 | { |
|
1687 | 1689 | set_lfr_soft_reset( 1 ); |
|
1688 | 1690 | |
|
1689 | 1691 | set_lfr_soft_reset( 0 ); |
|
1690 | 1692 | |
|
1691 | 1693 | set_hk_lfr_sc_potential_flag( true ); |
|
1692 | 1694 | } |
General Comments 0
You need to be logged in to leave comments.
Login now