@@ -0,0 +1,23 | |||
|
1 | <?xml version='1.0' encoding='utf-8'?> | |
|
2 | <soc name="Leon"> | |
|
3 | <peripheral vid="32" name="SRCTRLS-0WS" pid="1"> | |
|
4 | <register name="EDAC Control" addOffset="0"> | |
|
5 | <bitField size="4" offset="0" name="BTOS" mode="3" desc="write or read busy to scrub delay configuration"/> | |
|
6 | <bitField size="4" offset="4" name="SCRUBRATE" mode="3" desc="write or read scrub rate period configuration"/> | |
|
7 | <bitField name="RUN" offset="8" size="1" mode="3" desc="when set run the memory configuration"/> | |
|
8 | <bitField name="BPBUSYN" offset="9" size="1" mode="3" desc="make controller to ignore busy signal"/> | |
|
9 | <bitField name="WENSRAM" offset="12" size="8" mode="3" desc="when set write configuration to chip 8 to 1, else read configuration"/> | |
|
10 | <bitField name="BYPASSEDAC" offset="20" size="8" mode="3" desc="bypass edac (for chips 8 to 1)"/> | |
|
11 | <bitField name="WASHMEM" offset="31" size="1" mode="3" desc="Frame error (FE) - indicates that a framing error was detected. Reset value: ‘0’"/> | |
|
12 | </register> | |
|
13 | </peripheral> | |
|
14 | </soc> | |
|
15 | ||
|
16 | ||
|
17 | ||
|
18 | ||
|
19 | ||
|
20 | ||
|
21 | ||
|
22 | ||
|
23 |
@@ -0,0 +1,71 | |||
|
1 | <?xml version='1.0' encoding='utf-8'?> | |
|
2 | <soc name="Leon"> | |
|
3 | <peripheral vid="25" name="LPP_APB_DAC" pid="7"> | |
|
4 | <register name="DAC Control" addOffset="0"> | |
|
5 | <bitField size="2" offset="0" name="Dac config" mode="3" desc="Set the two configuration bits of the DAC ‘00’ mean normal operation, ‘01’ mean 1kOhms connected to GND, ‘10’ mean 100kOhms connected to GND, ‘11’ mean high impedance"/> | |
|
6 | <bitField size="1" offset="4" name="Reload" mode="3" desc="Reload freq divider to the value N, can be used also to stop dac"/> | |
|
7 | <bitField name="Interleavde" offset="5" size="1" mode="3" desc="Set interleaved mode"/> | |
|
8 | </register> | |
|
9 | <register name="Prescaller" addOffset="4"> | |
|
10 | <bitField size="32" offset="0" name="Pre" mode="3" desc="Set the prescaller division"/> | |
|
11 | </register> | |
|
12 | <register name="Div" addOffset="8"> | |
|
13 | <bitField size="32" offset="0" name="N" mode="3" desc="Set the division factor"/> | |
|
14 | </register> | |
|
15 | <register name="Address" addOffset="12"> | |
|
16 | <bitField size="32" offset="0" name="Address" mode="3" desc="Set the DAC RAM buffer address pointer"/> | |
|
17 | </register> | |
|
18 | <register name="DATA" addOffset="16"> | |
|
19 | <bitField size="32" offset="0" name="DATA" mode="3" desc="DATA to be written in the DAC RAM buffer"/> | |
|
20 | </register> | |
|
21 | </peripheral> | |
|
22 | <peripheral vid="25" name="LPP_LFR_MANAGEMENT" pid="34"> | |
|
23 | <register name="CONTROL" addOffset="0"> | |
|
24 | <bitField size="1" offset="0" name="ctrl" mode="3" desc="NC"/> | |
|
25 | <bitField size="1" offset="1" name="Soft Reset" mode="3" desc="NC "/> | |
|
26 | <bitField name="LFR Soft Reset" offset="5" size="1" mode="3" desc="NC"/> | |
|
27 | </register> | |
|
28 | <register name="COARSE TIME LOAD" addOffset="4"> | |
|
29 | <bitField size="31" offset="0" name="Coarse Time Load" mode="3" desc="NC"/> | |
|
30 | </register> | |
|
31 | <register name="COARSE TIME" addOffset="8"> | |
|
32 | <bitField size="31" offset="0" name="Coarse Time" mode="1" desc="NC"/> | |
|
33 | </register> | |
|
34 | <register name="TEMP0" addOffset="12"> | |
|
35 | <bitField size="16" offset="0" name="HK Temperature 0" mode="1" desc="NC"/> | |
|
36 | </register> | |
|
37 | <register name="TEMP1" addOffset="16"> | |
|
38 | <bitField size="16" offset="0" name="HK Temperature 1" mode="1" desc="NC"/> | |
|
39 | </register> | |
|
40 | <register name="TEMP2" addOffset="20"> | |
|
41 | <bitField size="16" offset="0" name="HK Temperature 2" mode="1" desc="NC"/> | |
|
42 | </register> | |
|
43 | <register name="DAC Control" addOffset="24"> | |
|
44 | <bitField size="2" offset="0" name="Dac config" mode="3" desc="Set the two configuration bits of the DAC ‘00’ mean normal operation, ‘01’ mean 1kOhms connected to GND, ‘10’ mean 100kOhms connected to GND, ‘11’ mean high impedance"/> | |
|
45 | <bitField size="1" offset="4" name="Reload" mode="3" desc="Reload freq divider to the value N, can be used also to stop dac"/> | |
|
46 | <bitField name="Interleavde" offset="5" size="1" mode="3" desc="Set interleaved mode"/> | |
|
47 | <bitField name="Enable" offset="6" size="1" mode="3" desc="Scm cal enable, drives the multiplexer"/> | |
|
48 | </register> | |
|
49 | <register name="Prescaller" addOffset="28"> | |
|
50 | <bitField size="32" offset="0" name="Pre" mode="3" desc="Set the prescaller division"/> | |
|
51 | </register> | |
|
52 | <register name="Div" addOffset="32"> | |
|
53 | <bitField size="32" offset="0" name="N" mode="3" desc="Set the division factor"/> | |
|
54 | </register> | |
|
55 | <register name="Address" addOffset="36"> | |
|
56 | <bitField size="32" offset="0" name="Address" mode="3" desc="Set the DAC RAM buffer address pointer"/> | |
|
57 | </register> | |
|
58 | <register name="DATA" addOffset="40"> | |
|
59 | <bitField size="32" offset="0" name="DATA" mode="3" desc="DATA to be written in the DAC RAM buffer"/> | |
|
60 | </register> | |
|
61 | </peripheral> | |
|
62 | </soc> | |
|
63 | ||
|
64 | ||
|
65 | ||
|
66 | ||
|
67 | ||
|
68 | ||
|
69 | ||
|
70 | ||
|
71 |
@@ -0,0 +1,75 | |||
|
1 | #include "memtester.h" | |
|
2 | #include <socexplorerengine.h> | |
|
3 | #include <socexplorerproxy.h> | |
|
4 | ||
|
5 | MemTester::MemTester(QObject* parent) | |
|
6 | :QObject(parent) | |
|
7 | { | |
|
8 | ||
|
9 | } | |
|
10 | ||
|
11 | MemTester::~MemTester() | |
|
12 | { | |
|
13 | ||
|
14 | } | |
|
15 | ||
|
16 | ||
|
17 | unsigned int p_pow2(unsigned int v) | |
|
18 | { | |
|
19 | static const char LogTable256[256] = | |
|
20 | { | |
|
21 | #define LT(n) n, n, n, n, n, n, n, n, n, n, n, n, n, n, n, n | |
|
22 | -1, 0, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3, | |
|
23 | LT(4), LT(5), LT(5), LT(6), LT(6), LT(6), LT(6), | |
|
24 | LT(7), LT(7), LT(7), LT(7), LT(7), LT(7), LT(7), LT(7) | |
|
25 | }; | |
|
26 | ||
|
27 | unsigned int r; // r will be lg(v) | |
|
28 | register unsigned int t, tt; // temporaries | |
|
29 | ||
|
30 | if (tt = v >> 16) | |
|
31 | { | |
|
32 | r = (t = tt >> 8) ? 24 + LogTable256[t] : 16 + LogTable256[tt]; | |
|
33 | } | |
|
34 | else | |
|
35 | { | |
|
36 | r = (t = v >> 8) ? 8 + LogTable256[t] : LogTable256[v]; | |
|
37 | } | |
|
38 | return r; | |
|
39 | } | |
|
40 | ||
|
41 | unsigned int MemTester::measureMemSize(socexplorerplugin *plugin, unsigned int address, unsigned int maxSize) | |
|
42 | { | |
|
43 | unsigned int curVal=1,testAddress=address; | |
|
44 | unsigned int size=0; | |
|
45 | if(Q_UNLIKELY(!plugin || !plugin->isConnected()))return 0; | |
|
46 | plugin->Write(&curVal,1,testAddress); | |
|
47 | plugin->Read(&curVal,1,testAddress); | |
|
48 | if(Q_UNLIKELY(curVal!=1)) | |
|
49 | return size; | |
|
50 | unsigned int max= p_pow2((0xFFFFFFFFFFFFFFFF - address))+1; | |
|
51 | register unsigned int maxSizeLg=p_pow2(maxSize)-1; | |
|
52 | if(max>maxSizeLg) | |
|
53 | max=maxSizeLg; | |
|
54 | if(max>32)max=32; | |
|
55 | for(size=2;size<max;size++) //check each address bit | |
|
56 | { | |
|
57 | testAddress = (unsigned int)(address+(1<<size)); | |
|
58 | curVal = (unsigned int)(1<<size); | |
|
59 | plugin->Write(&curVal,1,testAddress); | |
|
60 | plugin->Read(&curVal,1,testAddress); | |
|
61 | if((unsigned int)curVal!=(unsigned int)(1<<size)) | |
|
62 | return (1<<(size)); | |
|
63 | plugin->Read(&curVal,1,address); | |
|
64 | if((curVal==(unsigned int)(1<<size)) && (size!=0)) | |
|
65 | return (1<<(size)); | |
|
66 | } | |
|
67 | return (1<<(size+1)); | |
|
68 | } | |
|
69 | ||
|
70 | unsigned int MemTester::measureMemSize(const QString &plugin, unsigned int address, unsigned int maxSize) | |
|
71 | { | |
|
72 | return measureMemSize(socexplorerproxy::findPlugin(plugin),address,maxSize); | |
|
73 | } | |
|
74 | ||
|
75 |
@@ -0,0 +1,19 | |||
|
1 | #ifndef MEMTESTER_H | |
|
2 | #define MEMTESTER_H | |
|
3 | #include <socexplorerplugin.h> | |
|
4 | #include <QObject> | |
|
5 | ||
|
6 | class MemTester : public QObject | |
|
7 | { | |
|
8 | Q_OBJECT | |
|
9 | public: | |
|
10 | MemTester(QObject *parent=0); | |
|
11 | ~MemTester(); | |
|
12 | ||
|
13 | static unsigned int measureMemSize(socexplorerplugin* plugin, unsigned int address,unsigned int maxSize=0xFFFFFFFF); | |
|
14 | static unsigned int measureMemSize(const QString& plugin, unsigned int address,unsigned int maxSize=0xFFFFFFFF); | |
|
15 | public slots: | |
|
16 | ||
|
17 | }; | |
|
18 | ||
|
19 | #endif // MEMTESTER_H |
@@ -0,0 +1,325 | |||
|
1 | %global upstream_name socexplorer-0.4 | |
|
2 | ||
|
3 | Name: socexplorer | |
|
4 | Version: 0.4 | |
|
5 | Release: 6%{?dist} | |
|
6 | Summary: SocExplorer is an open source generic System On Chip testing software/framework. | |
|
7 | Group: Development/Tools | |
|
8 | License: GPLv2+ | |
|
9 | URL: https://hephaistos.lpp.polytechnique.fr/redmine/projects/socexplorer | |
|
10 | Source0: https://hephaistos.lpp.polytechnique.fr/redmine/attachments/download/376/socexplorer-0.4.zip | |
|
11 | # | |
|
12 | #Patch0: socexplorer_desktop.patch | |
|
13 | ||
|
14 | ||
|
15 | BuildRequires: python2-devel | |
|
16 | BuildRequires: qt5-qtbase-devel | |
|
17 | BuildRequires: qt5-qtwebkit-devel | |
|
18 | BuildRequires: qt5-qttools-static | |
|
19 | BuildRequires: qt5-qttools-devel | |
|
20 | BuildRequires: qt5-qtsvg-devel | |
|
21 | BuildRequires: qt5-qtxmlpatterns-devel | |
|
22 | BuildRequires: qt5-qtmultimedia-devel | |
|
23 | BuildRequires: elfutils-libelf-devel | |
|
24 | BuildRequires: qt5-pythonqt-devel | |
|
25 | BuildRequires: mercurial | |
|
26 | BuildRequires: appdata-tools | |
|
27 | BuildRequires: desktop-file-utils | |
|
28 | ||
|
29 | Requires(post): python2 | |
|
30 | Requires(post): qt5-qtbase | |
|
31 | Requires(post): qt5-qtwebkit | |
|
32 | Requires(post): qt5-qtsvg | |
|
33 | Requires(post): qt5-qtxmlpatterns | |
|
34 | Requires(post): elfutils-libelf | |
|
35 | Requires(post): qt5-pythonqt | |
|
36 | ||
|
37 | Provides: socexplorer = 0.4-6 | |
|
38 | Obsoletes: socexplorer < 0.4-5 | |
|
39 | ||
|
40 | %description | |
|
41 | SocExplorer is an open source generic System On Chip testing software/framework. We write this software for the development and the validation of our instrument, the Low Frequency Receiver(LFR) for the Solar Orbiter mission. This instrument is based on an actel FPGA hosting a LEON3FT processor and some peripherals. To make it more collaborative, we use a plugin based system, the main executable is SocExplorer then all the functionality are provided by plugins. Like this everybody can provide his set of plugins to handle a new SOC or just a new peripheral. SocExplorer uses PythonQt to allow user to automate some tasks such as loading some plugins, configuring them and talking with his device. | |
|
42 | ||
|
43 | %package devel | |
|
44 | Summary: SocExplorer is an open source generic System On Chip testing software/framework. | |
|
45 | Group: Development/Tools | |
|
46 | Requires: %{name}%{?_isa} = %{version}-%{release} | |
|
47 | ||
|
48 | %description devel | |
|
49 | Header files and development libraries for SocExplorer package. SocExplorer is an open source generic System On Chip testing software/framework. | |
|
50 | ||
|
51 | %prep | |
|
52 | %setup -q -n %{upstream_name} | |
|
53 | #%patch0 -p1 -b .desktop | |
|
54 | ||
|
55 | ||
|
56 | ||
|
57 | %build | |
|
58 | %{_qt5_qmake} | |
|
59 | ||
|
60 | make %{?_smp_mflags} | |
|
61 | ||
|
62 | %install | |
|
63 | make install INSTALL_ROOT=%{buildroot} | |
|
64 | appdata-validate --nonet %{buildroot}/%{_datadir}/appdata/socexplorer.appdata.xml | |
|
65 | desktop-file-validate $RPM_BUILD_ROOT%{_datadir}/applications/socexplorer.desktop | |
|
66 | ||
|
67 | %post -p /sbin/ldconfig | |
|
68 | ||
|
69 | %postun -p /sbin/ldconfig | |
|
70 | ||
|
71 | %files | |
|
72 | /etc/SocExplorer/python/PygmentsHighlighter.py | |
|
73 | /etc/SocExplorer/python/PygmentsHighlighter.pyc | |
|
74 | /etc/SocExplorer/python/PygmentsHighlighter.pyo | |
|
75 | /etc/SocExplorer/python/PythonCompleter.py | |
|
76 | /etc/SocExplorer/python/PythonCompleter.pyc | |
|
77 | /etc/SocExplorer/python/PythonCompleter.pyo | |
|
78 | /etc/SocExplorer/python/module_completion.py | |
|
79 | /etc/SocExplorer/python/module_completion.pyc | |
|
80 | /etc/SocExplorer/python/module_completion.pyo | |
|
81 | /etc/SocExplorer/python/pygments/__init__.py | |
|
82 | /etc/SocExplorer/python/pygments/__init__.pyc | |
|
83 | /etc/SocExplorer/python/pygments/__init__.pyo | |
|
84 | /etc/SocExplorer/python/pygments/cmdline.py | |
|
85 | /etc/SocExplorer/python/pygments/cmdline.pyc | |
|
86 | /etc/SocExplorer/python/pygments/cmdline.pyo | |
|
87 | /etc/SocExplorer/python/pygments/console.py | |
|
88 | /etc/SocExplorer/python/pygments/console.pyc | |
|
89 | /etc/SocExplorer/python/pygments/console.pyo | |
|
90 | /etc/SocExplorer/python/pygments/filter.py | |
|
91 | /etc/SocExplorer/python/pygments/filter.pyc | |
|
92 | /etc/SocExplorer/python/pygments/filter.pyo | |
|
93 | /etc/SocExplorer/python/pygments/filters/__init__.py | |
|
94 | /etc/SocExplorer/python/pygments/filters/__init__.pyc | |
|
95 | /etc/SocExplorer/python/pygments/filters/__init__.pyo | |
|
96 | /etc/SocExplorer/python/pygments/formatter.py | |
|
97 | /etc/SocExplorer/python/pygments/formatter.pyc | |
|
98 | /etc/SocExplorer/python/pygments/formatter.pyo | |
|
99 | /etc/SocExplorer/python/pygments/formatters/__init__.py | |
|
100 | /etc/SocExplorer/python/pygments/formatters/__init__.pyc | |
|
101 | /etc/SocExplorer/python/pygments/formatters/__init__.pyo | |
|
102 | /etc/SocExplorer/python/pygments/formatters/_mapping.py | |
|
103 | /etc/SocExplorer/python/pygments/formatters/_mapping.pyc | |
|
104 | /etc/SocExplorer/python/pygments/formatters/_mapping.pyo | |
|
105 | /etc/SocExplorer/python/pygments/formatters/bbcode.py | |
|
106 | /etc/SocExplorer/python/pygments/formatters/bbcode.pyc | |
|
107 | /etc/SocExplorer/python/pygments/formatters/bbcode.pyo | |
|
108 | /etc/SocExplorer/python/pygments/formatters/html.py | |
|
109 | /etc/SocExplorer/python/pygments/formatters/html.pyc | |
|
110 | /etc/SocExplorer/python/pygments/formatters/html.pyo | |
|
111 | /etc/SocExplorer/python/pygments/formatters/img.py | |
|
112 | /etc/SocExplorer/python/pygments/formatters/img.pyc | |
|
113 | /etc/SocExplorer/python/pygments/formatters/img.pyo | |
|
114 | /etc/SocExplorer/python/pygments/formatters/latex.py | |
|
115 | /etc/SocExplorer/python/pygments/formatters/latex.pyc | |
|
116 | /etc/SocExplorer/python/pygments/formatters/latex.pyo | |
|
117 | /etc/SocExplorer/python/pygments/formatters/other.py | |
|
118 | /etc/SocExplorer/python/pygments/formatters/other.pyc | |
|
119 | /etc/SocExplorer/python/pygments/formatters/other.pyo | |
|
120 | /etc/SocExplorer/python/pygments/formatters/rtf.py | |
|
121 | /etc/SocExplorer/python/pygments/formatters/rtf.pyc | |
|
122 | /etc/SocExplorer/python/pygments/formatters/rtf.pyo | |
|
123 | /etc/SocExplorer/python/pygments/formatters/svg.py | |
|
124 | /etc/SocExplorer/python/pygments/formatters/svg.pyc | |
|
125 | /etc/SocExplorer/python/pygments/formatters/svg.pyo | |
|
126 | /etc/SocExplorer/python/pygments/formatters/terminal.py | |
|
127 | /etc/SocExplorer/python/pygments/formatters/terminal.pyc | |
|
128 | /etc/SocExplorer/python/pygments/formatters/terminal.pyo | |
|
129 | /etc/SocExplorer/python/pygments/formatters/terminal256.py | |
|
130 | /etc/SocExplorer/python/pygments/formatters/terminal256.pyc | |
|
131 | /etc/SocExplorer/python/pygments/formatters/terminal256.pyo | |
|
132 | /etc/SocExplorer/python/pygments/lexer.py | |
|
133 | /etc/SocExplorer/python/pygments/lexer.pyc | |
|
134 | /etc/SocExplorer/python/pygments/lexer.pyo | |
|
135 | /etc/SocExplorer/python/pygments/lexers/__init__.py | |
|
136 | /etc/SocExplorer/python/pygments/lexers/__init__.pyc | |
|
137 | /etc/SocExplorer/python/pygments/lexers/__init__.pyo | |
|
138 | /etc/SocExplorer/python/pygments/lexers/_asybuiltins.py | |
|
139 | /etc/SocExplorer/python/pygments/lexers/_asybuiltins.pyc | |
|
140 | /etc/SocExplorer/python/pygments/lexers/_asybuiltins.pyo | |
|
141 | /etc/SocExplorer/python/pygments/lexers/_clbuiltins.py | |
|
142 | /etc/SocExplorer/python/pygments/lexers/_clbuiltins.pyc | |
|
143 | /etc/SocExplorer/python/pygments/lexers/_clbuiltins.pyo | |
|
144 | /etc/SocExplorer/python/pygments/lexers/_luabuiltins.py | |
|
145 | /etc/SocExplorer/python/pygments/lexers/_luabuiltins.pyc | |
|
146 | /etc/SocExplorer/python/pygments/lexers/_luabuiltins.pyo | |
|
147 | /etc/SocExplorer/python/pygments/lexers/_mapping.py | |
|
148 | /etc/SocExplorer/python/pygments/lexers/_mapping.pyc | |
|
149 | /etc/SocExplorer/python/pygments/lexers/_mapping.pyo | |
|
150 | /etc/SocExplorer/python/pygments/lexers/_phpbuiltins.py | |
|
151 | /etc/SocExplorer/python/pygments/lexers/_phpbuiltins.pyc | |
|
152 | /etc/SocExplorer/python/pygments/lexers/_phpbuiltins.pyo | |
|
153 | /etc/SocExplorer/python/pygments/lexers/_postgres_builtins.py | |
|
154 | /etc/SocExplorer/python/pygments/lexers/_postgres_builtins.pyc | |
|
155 | /etc/SocExplorer/python/pygments/lexers/_postgres_builtins.pyo | |
|
156 | /etc/SocExplorer/python/pygments/lexers/_scilab_builtins.py | |
|
157 | /etc/SocExplorer/python/pygments/lexers/_scilab_builtins.pyc | |
|
158 | /etc/SocExplorer/python/pygments/lexers/_scilab_builtins.pyo | |
|
159 | /etc/SocExplorer/python/pygments/lexers/_vimbuiltins.py | |
|
160 | /etc/SocExplorer/python/pygments/lexers/_vimbuiltins.pyc | |
|
161 | /etc/SocExplorer/python/pygments/lexers/_vimbuiltins.pyo | |
|
162 | /etc/SocExplorer/python/pygments/lexers/agile.py | |
|
163 | /etc/SocExplorer/python/pygments/lexers/agile.pyc | |
|
164 | /etc/SocExplorer/python/pygments/lexers/agile.pyo | |
|
165 | /etc/SocExplorer/python/pygments/lexers/asm.py | |
|
166 | /etc/SocExplorer/python/pygments/lexers/asm.pyc | |
|
167 | /etc/SocExplorer/python/pygments/lexers/asm.pyo | |
|
168 | /etc/SocExplorer/python/pygments/lexers/compiled.py | |
|
169 | /etc/SocExplorer/python/pygments/lexers/compiled.pyc | |
|
170 | /etc/SocExplorer/python/pygments/lexers/compiled.pyo | |
|
171 | /etc/SocExplorer/python/pygments/lexers/dotnet.py | |
|
172 | /etc/SocExplorer/python/pygments/lexers/dotnet.pyc | |
|
173 | /etc/SocExplorer/python/pygments/lexers/dotnet.pyo | |
|
174 | /etc/SocExplorer/python/pygments/lexers/functional.py | |
|
175 | /etc/SocExplorer/python/pygments/lexers/functional.pyc | |
|
176 | /etc/SocExplorer/python/pygments/lexers/functional.pyo | |
|
177 | /etc/SocExplorer/python/pygments/lexers/hdl.py | |
|
178 | /etc/SocExplorer/python/pygments/lexers/hdl.pyc | |
|
179 | /etc/SocExplorer/python/pygments/lexers/hdl.pyo | |
|
180 | /etc/SocExplorer/python/pygments/lexers/jvm.py | |
|
181 | /etc/SocExplorer/python/pygments/lexers/jvm.pyc | |
|
182 | /etc/SocExplorer/python/pygments/lexers/jvm.pyo | |
|
183 | /etc/SocExplorer/python/pygments/lexers/math.py | |
|
184 | /etc/SocExplorer/python/pygments/lexers/math.pyc | |
|
185 | /etc/SocExplorer/python/pygments/lexers/math.pyo | |
|
186 | /etc/SocExplorer/python/pygments/lexers/other.py | |
|
187 | /etc/SocExplorer/python/pygments/lexers/other.pyc | |
|
188 | /etc/SocExplorer/python/pygments/lexers/other.pyo | |
|
189 | /etc/SocExplorer/python/pygments/lexers/parsers.py | |
|
190 | /etc/SocExplorer/python/pygments/lexers/parsers.pyc | |
|
191 | /etc/SocExplorer/python/pygments/lexers/parsers.pyo | |
|
192 | /etc/SocExplorer/python/pygments/lexers/shell.py | |
|
193 | /etc/SocExplorer/python/pygments/lexers/shell.pyc | |
|
194 | /etc/SocExplorer/python/pygments/lexers/shell.pyo | |
|
195 | /etc/SocExplorer/python/pygments/lexers/special.py | |
|
196 | /etc/SocExplorer/python/pygments/lexers/special.pyc | |
|
197 | /etc/SocExplorer/python/pygments/lexers/special.pyo | |
|
198 | /etc/SocExplorer/python/pygments/lexers/sql.py | |
|
199 | /etc/SocExplorer/python/pygments/lexers/sql.pyc | |
|
200 | /etc/SocExplorer/python/pygments/lexers/sql.pyo | |
|
201 | /etc/SocExplorer/python/pygments/lexers/templates.py | |
|
202 | /etc/SocExplorer/python/pygments/lexers/templates.pyc | |
|
203 | /etc/SocExplorer/python/pygments/lexers/templates.pyo | |
|
204 | /etc/SocExplorer/python/pygments/lexers/text.py | |
|
205 | /etc/SocExplorer/python/pygments/lexers/text.pyc | |
|
206 | /etc/SocExplorer/python/pygments/lexers/text.pyo | |
|
207 | /etc/SocExplorer/python/pygments/lexers/web.py | |
|
208 | /etc/SocExplorer/python/pygments/lexers/web.pyc | |
|
209 | /etc/SocExplorer/python/pygments/lexers/web.pyo | |
|
210 | /etc/SocExplorer/python/pygments/plugin.py | |
|
211 | /etc/SocExplorer/python/pygments/plugin.pyc | |
|
212 | /etc/SocExplorer/python/pygments/plugin.pyo | |
|
213 | /etc/SocExplorer/python/pygments/scanner.py | |
|
214 | /etc/SocExplorer/python/pygments/scanner.pyc | |
|
215 | /etc/SocExplorer/python/pygments/scanner.pyo | |
|
216 | /etc/SocExplorer/python/pygments/style.py | |
|
217 | /etc/SocExplorer/python/pygments/style.pyc | |
|
218 | /etc/SocExplorer/python/pygments/style.pyo | |
|
219 | /etc/SocExplorer/python/pygments/styles/__init__.py | |
|
220 | /etc/SocExplorer/python/pygments/styles/__init__.pyc | |
|
221 | /etc/SocExplorer/python/pygments/styles/__init__.pyo | |
|
222 | /etc/SocExplorer/python/pygments/styles/autumn.py | |
|
223 | /etc/SocExplorer/python/pygments/styles/autumn.pyc | |
|
224 | /etc/SocExplorer/python/pygments/styles/autumn.pyo | |
|
225 | /etc/SocExplorer/python/pygments/styles/borland.py | |
|
226 | /etc/SocExplorer/python/pygments/styles/borland.pyc | |
|
227 | /etc/SocExplorer/python/pygments/styles/borland.pyo | |
|
228 | /etc/SocExplorer/python/pygments/styles/bw.py | |
|
229 | /etc/SocExplorer/python/pygments/styles/bw.pyc | |
|
230 | /etc/SocExplorer/python/pygments/styles/bw.pyo | |
|
231 | /etc/SocExplorer/python/pygments/styles/colorful.py | |
|
232 | /etc/SocExplorer/python/pygments/styles/colorful.pyc | |
|
233 | /etc/SocExplorer/python/pygments/styles/colorful.pyo | |
|
234 | /etc/SocExplorer/python/pygments/styles/default.py | |
|
235 | /etc/SocExplorer/python/pygments/styles/default.pyc | |
|
236 | /etc/SocExplorer/python/pygments/styles/default.pyo | |
|
237 | /etc/SocExplorer/python/pygments/styles/emacs.py | |
|
238 | /etc/SocExplorer/python/pygments/styles/emacs.pyc | |
|
239 | /etc/SocExplorer/python/pygments/styles/emacs.pyo | |
|
240 | /etc/SocExplorer/python/pygments/styles/friendly.py | |
|
241 | /etc/SocExplorer/python/pygments/styles/friendly.pyc | |
|
242 | /etc/SocExplorer/python/pygments/styles/friendly.pyo | |
|
243 | /etc/SocExplorer/python/pygments/styles/fruity.py | |
|
244 | /etc/SocExplorer/python/pygments/styles/fruity.pyc | |
|
245 | /etc/SocExplorer/python/pygments/styles/fruity.pyo | |
|
246 | /etc/SocExplorer/python/pygments/styles/manni.py | |
|
247 | /etc/SocExplorer/python/pygments/styles/manni.pyc | |
|
248 | /etc/SocExplorer/python/pygments/styles/manni.pyo | |
|
249 | /etc/SocExplorer/python/pygments/styles/monokai.py | |
|
250 | /etc/SocExplorer/python/pygments/styles/monokai.pyc | |
|
251 | /etc/SocExplorer/python/pygments/styles/monokai.pyo | |
|
252 | /etc/SocExplorer/python/pygments/styles/murphy.py | |
|
253 | /etc/SocExplorer/python/pygments/styles/murphy.pyc | |
|
254 | /etc/SocExplorer/python/pygments/styles/murphy.pyo | |
|
255 | /etc/SocExplorer/python/pygments/styles/native.py | |
|
256 | /etc/SocExplorer/python/pygments/styles/native.pyc | |
|
257 | /etc/SocExplorer/python/pygments/styles/native.pyo | |
|
258 | /etc/SocExplorer/python/pygments/styles/pastie.py | |
|
259 | /etc/SocExplorer/python/pygments/styles/pastie.pyc | |
|
260 | /etc/SocExplorer/python/pygments/styles/pastie.pyo | |
|
261 | /etc/SocExplorer/python/pygments/styles/perldoc.py | |
|
262 | /etc/SocExplorer/python/pygments/styles/perldoc.pyc | |
|
263 | /etc/SocExplorer/python/pygments/styles/perldoc.pyo | |
|
264 | /etc/SocExplorer/python/pygments/styles/rrt.py | |
|
265 | /etc/SocExplorer/python/pygments/styles/rrt.pyc | |
|
266 | /etc/SocExplorer/python/pygments/styles/rrt.pyo | |
|
267 | /etc/SocExplorer/python/pygments/styles/tango.py | |
|
268 | /etc/SocExplorer/python/pygments/styles/tango.pyc | |
|
269 | /etc/SocExplorer/python/pygments/styles/tango.pyo | |
|
270 | /etc/SocExplorer/python/pygments/styles/trac.py | |
|
271 | /etc/SocExplorer/python/pygments/styles/trac.pyc | |
|
272 | /etc/SocExplorer/python/pygments/styles/trac.pyo | |
|
273 | /etc/SocExplorer/python/pygments/styles/vim.py | |
|
274 | /etc/SocExplorer/python/pygments/styles/vim.pyc | |
|
275 | /etc/SocExplorer/python/pygments/styles/vim.pyo | |
|
276 | /etc/SocExplorer/python/pygments/styles/vs.py | |
|
277 | /etc/SocExplorer/python/pygments/styles/vs.pyc | |
|
278 | /etc/SocExplorer/python/pygments/styles/vs.pyo | |
|
279 | /etc/SocExplorer/python/pygments/token.py | |
|
280 | /etc/SocExplorer/python/pygments/token.pyc | |
|
281 | /etc/SocExplorer/python/pygments/token.pyo | |
|
282 | /etc/SocExplorer/python/pygments/unistring.py | |
|
283 | /etc/SocExplorer/python/pygments/unistring.pyc | |
|
284 | /etc/SocExplorer/python/pygments/unistring.pyo | |
|
285 | /etc/SocExplorer/python/pygments/util.py | |
|
286 | /etc/SocExplorer/python/pygments/util.pyc | |
|
287 | /etc/SocExplorer/python/pygments/util.pyo | |
|
288 | /etc/SocExplorer/plugin.conf.d/plugins.conf | |
|
289 | %{_bindir}/SocExplorer_TCP_Terminal | |
|
290 | %{_bindir}/socexplorer | |
|
291 | %{_datadir}/SocExplorer/icon.png | |
|
292 | %{_datadir}/SocExplorer/Grlib.xml | |
|
293 | %{_datadir}/SocExplorer/LPP.xml | |
|
294 | %{_datadir}/SocExplorer/IAP.xml | |
|
295 | %{_datadir}/applications/socexplorer.desktop | |
|
296 | %{_datadir}/appdata/socexplorer.appdata.xml | |
|
297 | %{_qt5_libdir}/libsocexplorercommon.so* | |
|
298 | %{_qt5_libdir}/libsocexplorerengine.so* | |
|
299 | ||
|
300 | ||
|
301 | %files devel | |
|
302 | %{_qt5_headerdir}/SocExplorer/ | |
|
303 | %{_qt5_archdatadir}/mkspecs/features/socexplorerplugin.prf | |
|
304 | /usr/share/qtcreator/templates/wizards/SocExplorerPlugin/plugin.cpp | |
|
305 | /usr/share/qtcreator/templates/wizards/SocExplorerPlugin/plugin.h | |
|
306 | /usr/share/qtcreator/templates/wizards/SocExplorerPlugin/project.pro | |
|
307 | /usr/share/qtcreator/templates/wizards/SocExplorerPlugin/wizard.xml | |
|
308 | ||
|
309 | ||
|
310 | %changelog | |
|
311 | * Fri Feb 6 2015 Alexis Jeandet <alexis.jeandet@member.fsf.org> - 0.4 | |
|
312 | - Reseted patches uses r73 as source. | |
|
313 | * Tue Dec 30 2014 Alexis Jeandet <alexis.jeandet@member.fsf.org> - 0.4 | |
|
314 | - Reseted patches uses r72 as source. | |
|
315 | ||
|
316 | * Sun Jun 29 2014 Alexis Jeandet <alexis.jeandet@member.fsf.org> - 0.4 | |
|
317 | - Reseted patches uses r69 as source. | |
|
318 | ||
|
319 | * Sat Jun 28 2014 Alexis Jeandet <alexis.jeandet@member.fsf.org> - 0.4 | |
|
320 | - Applied patch r65 to install also plugin as RPM | |
|
321 | - Applied patch r66 to install xml soc descriptions in /usr/share/SocExplorer | |
|
322 | - Applied patch r67 to add appdata for gnome-software visibility | |
|
323 | ||
|
324 | * Tue Jun 24 2014 Alexis Jeandet <alexis.jeandet@member.fsf.org> - 0.4 | |
|
325 | - Initial Fedora packaging |
@@ -28,7 +28,10 unix{ | |||
|
28 | 28 | PluginConfPath.files = unixcfg/plugins.conf |
|
29 | 29 | share.path = /usr/share/SocExplorer |
|
30 | 30 | share.files = ressources/images/icon.png \ |
|
31 | ressources/Grlib.xml | |
|
31 | ressources/Grlib.xml \ | |
|
32 | ressources/LPP.xml \ | |
|
33 | ressources/IAP.xml | |
|
34 | ||
|
32 | 35 | Wizard.path = /usr/share/qtcreator/templates/wizards/SocExplorerPlugin |
|
33 | 36 | Wizard.files = Qt_Creator_Wizard/SocExplorerPlugin/logo-lpp-cutted.png \ |
|
34 | 37 | Qt_Creator_Wizard/SocExplorerPlugin/plugin.cpp \ |
@@ -40,6 +40,12 void PythonConsole::addObject(const QStr | |||
|
40 | 40 |
|
|
41 | 41 | } |
|
42 | 42 | |
|
43 | void PythonConsole::removeVariable(const QString& name) | |
|
44 | { | |
|
45 | this->mainContext->removeVariable(name); | |
|
46 | } | |
|
47 | ||
|
48 | ||
|
43 | 49 | void PythonConsole::setBussDriver(socexplorerplugin *driver) |
|
44 | 50 | { |
|
45 | 51 | this->bussdriver = driver; |
@@ -57,6 +57,7 public slots: | |||
|
57 | 57 | void registerObject(QObject* object,const QString& instanceName); |
|
58 | 58 | void changeSysDriverInstName(const QString newinstanceName,const QString previnstanceName); |
|
59 | 59 | void addObject(const QString& name, QObject* object); |
|
60 | void removeVariable(const QString& name); | |
|
60 | 61 | protected: |
|
61 | 62 | QSize sizeHint(); |
|
62 | 63 |
@@ -1,4 +1,3 | |||
|
1 | 1 | #include <QtCore/QObject> |
|
2 | 2 | #include <QtWidgets/QtWidgets> |
|
3 | 3 | #include "plugins/socexplorerplugin.h" |
|
4 |
@@ -10,7 +10,7 SOCEXPLORER_PLUGIN_LOADER="custom" | |||
|
10 | 10 | |
|
11 | 11 | SOCEXPLORER_CHAGESETNUM=$$system(hg id) |
|
12 | 12 | isEmpty(SOCEXPLORER_CHAGESETNUM){ |
|
13 |
SOCEXPLORER_CHAGESETNUM= |
|
|
13 | SOCEXPLORER_CHAGESETNUM=c4b98d42ee59 | |
|
14 | 14 | } |
|
15 | 15 | SOCEXPLORER_CHAGESETNUMSTR = '\\"$${SOCEXPLORER_CHAGESETNUM}\\"' |
|
16 | 16 | SOCEXPLORER_BRANCH=$$system(hg branch) |
@@ -19,7 +19,7 isEmpty(SOCEXPLORER_BRANCH){ | |||
|
19 | 19 | } |
|
20 | 20 | SOCEXPLORER_BRANCHSTR = '\\"$${SOCEXPLORER_BRANCH}\\"' |
|
21 | 21 | |
|
22 |
DEFINES += SOCEXPLORER_VERSION="\"\\\"0.4. |
|
|
22 | DEFINES += SOCEXPLORER_VERSION="\"\\\"0.4.5"\\\"\" | |
|
23 | 23 | DEFINES += SOCEXPLORER_CHAGESET=\"$${SOCEXPLORER_CHAGESETNUMSTR}\" |
|
24 | 24 | DEFINES += SOCEXPLORER_BRANCH=\"$${SOCEXPLORER_BRANCHSTR}\" |
|
25 | 25 | |
@@ -66,7 +66,8 header.files = engine/socexplorerengine. | |||
|
66 | 66 | SOC/socclk.h \ |
|
67 | 67 | PeripheralWidget/src/peripheralwidget.h \ |
|
68 | 68 | PeripheralWidget/src/registerwidget.h \ |
|
69 | PeripheralWidget/src/socregsviewer.h | |
|
69 | PeripheralWidget/src/socregsviewer.h \ | |
|
70 | memtester/memtester.h | |
|
70 | 71 | |
|
71 | 72 | |
|
72 | 73 | |
@@ -94,7 +95,8 INCLUDEPATH += engine \ | |||
|
94 | 95 | RegisterMVS \ |
|
95 | 96 | XmlEngine \ |
|
96 | 97 | SOC \ |
|
97 | PeripheralWidget/src | |
|
98 | PeripheralWidget/src \ | |
|
99 | memtester | |
|
98 | 100 | |
|
99 | 101 | |
|
100 | 102 | HEADERS += \ |
@@ -121,7 +123,8 HEADERS += \ | |||
|
121 | 123 | pluginsInterface/socexplorerplugininterface_global.h \ |
|
122 | 124 | proxy/socexplorerproxy.h \ |
|
123 | 125 | SOC/socexplorerenumdevice.h \ |
|
124 | PySocExplorerEngine.h | |
|
126 | PySocExplorerEngine.h \ | |
|
127 | memtester/memtester.h | |
|
125 | 128 | |
|
126 | 129 | |
|
127 | 130 | |
@@ -149,7 +152,8 SOURCES += \ | |||
|
149 | 152 | engine/socexplorerxmlfile.cpp \ |
|
150 | 153 | proxy/socexplorerproxy.cpp \ |
|
151 | 154 | SOC/socexplorerenumdevice.cpp \ |
|
152 | plugins/socexplorerplugin.cpp | |
|
155 | plugins/socexplorerplugin.cpp \ | |
|
156 | memtester/memtester.cpp | |
|
153 | 157 | |
|
154 | 158 | |
|
155 | 159 | OTHER_FILES += \ |
@@ -183,6 +183,16 int SocExplorerEngine::addEnumDevice(con | |||
|
183 | 183 | return 1; |
|
184 | 184 | } |
|
185 | 185 | |
|
186 | unsigned int SocExplorerEngine::memMeasureSize(socexplorerplugin *plugin, unsigned int address, unsigned int maxSize) | |
|
187 | { | |
|
188 | return MemTester::measureMemSize(plugin,address,maxSize); | |
|
189 | } | |
|
190 | ||
|
191 | unsigned int SocExplorerEngine::memMeasureSize(const QString &plugin, unsigned int address, unsigned int maxSize) | |
|
192 | { | |
|
193 | return MemTester::measureMemSize(plugin,address,maxSize); | |
|
194 | } | |
|
195 | ||
|
186 | 196 | |
|
187 | 197 | QString SocExplorerEngine::getDevName(int VID, int PID) |
|
188 | 198 | { |
@@ -41,6 +41,7 | |||
|
41 | 41 | #include <peripheralwidget.h> |
|
42 | 42 | #include <registerwidget.h> |
|
43 | 43 | #include <socmodel.h> |
|
44 | #include <memtester.h> | |
|
44 | 45 | |
|
45 | 46 | #if defined(SOCEXPLORER_SDK_BUILD) |
|
46 | 47 | # define SOCEXPLORER_SDK_EXPORT Q_DECL_EXPORT |
@@ -119,6 +120,8 public slots: | |||
|
119 | 120 | qint32 getEnumDeviceCount(socexplorerplugin* plugin,int VID,int PID); |
|
120 | 121 | qint32 getEnumDeviceCount(const QString& rootPlugin,int VID,int PID); |
|
121 | 122 | int addEnumDevice(const QString& rootPlugin,int VID,int PID,qint32 baseAddress,const QString& name); |
|
123 | unsigned int memMeasureSize(socexplorerplugin* plugin, unsigned int address,unsigned int maxSize=0xFFFFFFFF); | |
|
124 | unsigned int memMeasureSize(const QString& plugin, unsigned int address,unsigned int maxSize=0xFFFFFFFF); | |
|
122 | 125 | |
|
123 | 126 | private: |
|
124 | 127 | static SOCModel* plugin2Soc(socexplorerplugin* plugin); |
@@ -257,7 +257,7 socexplorerplugin *socexplorerproxy::fin | |||
|
257 | 257 | if(!_self)init(); |
|
258 | 258 | for(int k=0;k<linearDriverList->count();k++) |
|
259 | 259 | { |
|
260 | if(linearDriverList->at(k)->instanceName().compare(instanceName)) | |
|
260 | if(!linearDriverList->at(k)->instanceName().compare(instanceName)) | |
|
261 | 261 | return linearDriverList->at(k); |
|
262 | 262 | } |
|
263 | 263 | return NULL; |
This diff has been collapsed as it changes many lines, (826 lines changed) Show them Hide them | |||
@@ -2,9 +2,9 | |||
|
2 | 2 | #include <PythonQtConversion.h> |
|
3 | 3 | #include <PythonQtMethodInfo.h> |
|
4 | 4 | #include <PythonQtSignalReceiver.h> |
|
5 | #include <QIconEngine> | |
|
6 | 5 | #include <QVariant> |
|
7 | 6 | #include <qaction.h> |
|
7 | #include <qbackingstore.h> | |
|
8 | 8 | #include <qbitmap.h> |
|
9 | 9 | #include <qbytearray.h> |
|
10 | 10 | #include <qcoreevent.h> |
@@ -14,12 +14,14 | |||
|
14 | 14 | #include <qfont.h> |
|
15 | 15 | #include <qgraphicseffect.h> |
|
16 | 16 | #include <qgraphicsproxywidget.h> |
|
17 | #include <qicon.h> | |
|
17 | 18 | #include <qkeysequence.h> |
|
18 | 19 | #include <qlayout.h> |
|
19 | 20 | #include <qlist.h> |
|
20 | 21 | #include <qlocale.h> |
|
21 | 22 | #include <qmargins.h> |
|
22 | 23 | #include <qmenu.h> |
|
24 | #include <qmetaobject.h> | |
|
23 | 25 | #include <qobject.h> |
|
24 | 26 | #include <qpaintdevice.h> |
|
25 | 27 | #include <qpaintengine.h> |
@@ -34,6 +36,7 | |||
|
34 | 36 | #include <qstyle.h> |
|
35 | 37 | #include <qstyleoption.h> |
|
36 | 38 | #include <qwidget.h> |
|
39 | #include <qwindow.h> | |
|
37 | 40 | #include <socexplorerplugin.h> |
|
38 | 41 | |
|
39 | 42 | PythonQtShell_socexplorerplugin::~PythonQtShell_socexplorerplugin() { |
@@ -42,10 +45,10 PythonQtShell_socexplorerplugin::~Python | |||
|
42 | 45 | } |
|
43 | 46 | int PythonQtShell_socexplorerplugin::PID() |
|
44 | 47 | { |
|
45 | if (_wrapper) { | |
|
46 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "PID"); | |
|
47 | PyErr_Clear(); | |
|
48 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
48 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
49 | static PyObject* name = PyString_FromString("PID"); | |
|
50 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
51 | if (obj) { | |
|
49 | 52 | static const char* argumentList[] ={"int"}; |
|
50 | 53 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
51 | 54 | int returnValue; |
@@ -64,20 +67,22 if (_wrapper) { | |||
|
64 | 67 | if (result) { Py_DECREF(result); } |
|
65 | 68 | Py_DECREF(obj); |
|
66 | 69 | return returnValue; |
|
70 | } else { | |
|
71 | PyErr_Clear(); | |
|
67 | 72 | } |
|
68 | 73 | } |
|
69 | 74 | return socexplorerplugin::PID(); |
|
70 | 75 | } |
|
71 | unsigned int PythonQtShell_socexplorerplugin::Read(unsigned int* Value, unsigned int count, unsigned int address) | |
|
76 | unsigned int PythonQtShell_socexplorerplugin::Read(unsigned int* Value0, unsigned int count1, unsigned int address2) | |
|
72 | 77 | { |
|
73 | if (_wrapper) { | |
|
74 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "Read"); | |
|
75 | PyErr_Clear(); | |
|
76 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
78 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
79 | static PyObject* name = PyString_FromString("Read"); | |
|
80 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
81 | if (obj) { | |
|
77 | 82 | static const char* argumentList[] ={"unsigned int" , "unsigned int*" , "unsigned int" , "unsigned int"}; |
|
78 | 83 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(4, argumentList); |
|
79 | 84 | unsigned int returnValue; |
|
80 | void* args[4] = {NULL, (void*)&Value, (void*)&count, (void*)&address}; | |
|
85 | void* args[4] = {NULL, (void*)&Value0, (void*)&count1, (void*)&address2}; | |
|
81 | 86 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
82 | 87 | if (result) { |
|
83 | 88 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); |
@@ -92,16 +97,18 if (_wrapper) { | |||
|
92 | 97 | if (result) { Py_DECREF(result); } |
|
93 | 98 | Py_DECREF(obj); |
|
94 | 99 | return returnValue; |
|
100 | } else { | |
|
101 | PyErr_Clear(); | |
|
95 | 102 | } |
|
96 | 103 | } |
|
97 | return socexplorerplugin::Read(Value, count, address); | |
|
104 | return socexplorerplugin::Read(Value0, count1, address2); | |
|
98 | 105 | } |
|
99 | 106 | int PythonQtShell_socexplorerplugin::VID() |
|
100 | 107 | { |
|
101 | if (_wrapper) { | |
|
102 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "VID"); | |
|
103 | PyErr_Clear(); | |
|
104 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
108 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
109 | static PyObject* name = PyString_FromString("VID"); | |
|
110 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
111 | if (obj) { | |
|
105 | 112 | static const char* argumentList[] ={"int"}; |
|
106 | 113 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
107 | 114 | int returnValue; |
@@ -120,20 +127,22 if (_wrapper) { | |||
|
120 | 127 | if (result) { Py_DECREF(result); } |
|
121 | 128 | Py_DECREF(obj); |
|
122 | 129 | return returnValue; |
|
130 | } else { | |
|
131 | PyErr_Clear(); | |
|
123 | 132 | } |
|
124 | 133 | } |
|
125 | 134 | return socexplorerplugin::VID(); |
|
126 | 135 | } |
|
127 | unsigned int PythonQtShell_socexplorerplugin::Write(unsigned int* Value, unsigned int count, unsigned int address) | |
|
136 | unsigned int PythonQtShell_socexplorerplugin::Write(unsigned int* Value0, unsigned int count1, unsigned int address2) | |
|
128 | 137 | { |
|
129 | if (_wrapper) { | |
|
130 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "Write"); | |
|
131 | PyErr_Clear(); | |
|
132 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
138 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
139 | static PyObject* name = PyString_FromString("Write"); | |
|
140 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
141 | if (obj) { | |
|
133 | 142 | static const char* argumentList[] ={"unsigned int" , "unsigned int*" , "unsigned int" , "unsigned int"}; |
|
134 | 143 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(4, argumentList); |
|
135 | 144 | unsigned int returnValue; |
|
136 | void* args[4] = {NULL, (void*)&Value, (void*)&count, (void*)&address}; | |
|
145 | void* args[4] = {NULL, (void*)&Value0, (void*)&count1, (void*)&address2}; | |
|
137 | 146 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
138 | 147 | if (result) { |
|
139 | 148 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); |
@@ -148,16 +157,18 if (_wrapper) { | |||
|
148 | 157 | if (result) { Py_DECREF(result); } |
|
149 | 158 | Py_DECREF(obj); |
|
150 | 159 | return returnValue; |
|
160 | } else { | |
|
161 | PyErr_Clear(); | |
|
151 | 162 | } |
|
152 | 163 | } |
|
153 | return socexplorerplugin::Write(Value, count, address); | |
|
164 | return socexplorerplugin::Write(Value0, count1, address2); | |
|
154 | 165 | } |
|
155 | 166 | void PythonQtShell_socexplorerplugin::actionEvent(QActionEvent* arg__1) |
|
156 | 167 | { |
|
157 | if (_wrapper) { | |
|
158 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "actionEvent"); | |
|
159 | PyErr_Clear(); | |
|
160 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
168 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
169 | static PyObject* name = PyString_FromString("actionEvent"); | |
|
170 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
171 | if (obj) { | |
|
161 | 172 | static const char* argumentList[] ={"" , "QActionEvent*"}; |
|
162 | 173 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
163 | 174 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -165,33 +176,37 if (_wrapper) { | |||
|
165 | 176 | if (result) { Py_DECREF(result); } |
|
166 | 177 | Py_DECREF(obj); |
|
167 | 178 | return; |
|
179 | } else { | |
|
180 | PyErr_Clear(); | |
|
168 | 181 | } |
|
169 | 182 | } |
|
170 | 183 | socexplorerplugin::actionEvent(arg__1); |
|
171 | 184 | } |
|
172 | void PythonQtShell_socexplorerplugin::activate(bool flag) | |
|
185 | void PythonQtShell_socexplorerplugin::activate(bool flag0) | |
|
173 | 186 | { |
|
174 | if (_wrapper) { | |
|
175 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "activate"); | |
|
176 | PyErr_Clear(); | |
|
177 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
187 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
188 | static PyObject* name = PyString_FromString("activate"); | |
|
189 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
190 | if (obj) { | |
|
178 | 191 | static const char* argumentList[] ={"" , "bool"}; |
|
179 | 192 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
180 | void* args[2] = {NULL, (void*)&flag}; | |
|
193 | void* args[2] = {NULL, (void*)&flag0}; | |
|
181 | 194 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
182 | 195 | if (result) { Py_DECREF(result); } |
|
183 | 196 | Py_DECREF(obj); |
|
184 | 197 | return; |
|
198 | } else { | |
|
199 | PyErr_Clear(); | |
|
185 | 200 | } |
|
186 | 201 | } |
|
187 | socexplorerplugin::activate(flag); | |
|
202 | socexplorerplugin::activate(flag0); | |
|
188 | 203 | } |
|
189 | 204 | int PythonQtShell_socexplorerplugin::baseAddress() |
|
190 | 205 | { |
|
191 | if (_wrapper) { | |
|
192 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "baseAddress"); | |
|
193 | PyErr_Clear(); | |
|
194 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
206 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
207 | static PyObject* name = PyString_FromString("baseAddress"); | |
|
208 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
209 | if (obj) { | |
|
195 | 210 | static const char* argumentList[] ={"int"}; |
|
196 | 211 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
197 | 212 | int returnValue; |
@@ -210,16 +225,18 if (_wrapper) { | |||
|
210 | 225 | if (result) { Py_DECREF(result); } |
|
211 | 226 | Py_DECREF(obj); |
|
212 | 227 | return returnValue; |
|
228 | } else { | |
|
229 | PyErr_Clear(); | |
|
213 | 230 | } |
|
214 | 231 | } |
|
215 | 232 | return socexplorerplugin::baseAddress(); |
|
216 | 233 | } |
|
217 | 234 | QString PythonQtShell_socexplorerplugin::baseName() |
|
218 | 235 | { |
|
219 | if (_wrapper) { | |
|
220 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "baseName"); | |
|
221 | PyErr_Clear(); | |
|
222 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
236 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
237 | static PyObject* name = PyString_FromString("baseName"); | |
|
238 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
239 | if (obj) { | |
|
223 | 240 | static const char* argumentList[] ={"QString"}; |
|
224 | 241 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
225 | 242 | QString returnValue; |
@@ -238,33 +255,37 if (_wrapper) { | |||
|
238 | 255 | if (result) { Py_DECREF(result); } |
|
239 | 256 | Py_DECREF(obj); |
|
240 | 257 | return returnValue; |
|
258 | } else { | |
|
259 | PyErr_Clear(); | |
|
241 | 260 | } |
|
242 | 261 | } |
|
243 | 262 | return socexplorerplugin::baseName(); |
|
244 | 263 | } |
|
245 | void PythonQtShell_socexplorerplugin::changeEvent(QEvent* event) | |
|
264 | void PythonQtShell_socexplorerplugin::changeEvent(QEvent* event0) | |
|
246 | 265 | { |
|
247 | if (_wrapper) { | |
|
248 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "changeEvent"); | |
|
249 | PyErr_Clear(); | |
|
250 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
266 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
267 | static PyObject* name = PyString_FromString("changeEvent"); | |
|
268 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
269 | if (obj) { | |
|
251 | 270 | static const char* argumentList[] ={"" , "QEvent*"}; |
|
252 | 271 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
253 | void* args[2] = {NULL, (void*)&event}; | |
|
272 | void* args[2] = {NULL, (void*)&event0}; | |
|
254 | 273 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
255 | 274 | if (result) { Py_DECREF(result); } |
|
256 | 275 | Py_DECREF(obj); |
|
257 | 276 | return; |
|
277 | } else { | |
|
278 | PyErr_Clear(); | |
|
258 | 279 | } |
|
259 | 280 | } |
|
260 | socexplorerplugin::changeEvent(event); | |
|
281 | socexplorerplugin::changeEvent(event0); | |
|
261 | 282 | } |
|
262 | 283 | void PythonQtShell_socexplorerplugin::childEvent(QChildEvent* arg__1) |
|
263 | 284 | { |
|
264 | if (_wrapper) { | |
|
265 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "childEvent"); | |
|
266 | PyErr_Clear(); | |
|
267 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
285 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
286 | static PyObject* name = PyString_FromString("childEvent"); | |
|
287 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
288 | if (obj) { | |
|
268 | 289 | static const char* argumentList[] ={"" , "QChildEvent*"}; |
|
269 | 290 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
270 | 291 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -272,33 +293,37 if (_wrapper) { | |||
|
272 | 293 | if (result) { Py_DECREF(result); } |
|
273 | 294 | Py_DECREF(obj); |
|
274 | 295 | return; |
|
296 | } else { | |
|
297 | PyErr_Clear(); | |
|
275 | 298 | } |
|
276 | 299 | } |
|
277 | 300 | socexplorerplugin::childEvent(arg__1); |
|
278 | 301 | } |
|
279 | void PythonQtShell_socexplorerplugin::closeEvent(QCloseEvent* event) | |
|
302 | void PythonQtShell_socexplorerplugin::closeEvent(QCloseEvent* event0) | |
|
280 | 303 | { |
|
281 | if (_wrapper) { | |
|
282 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "closeEvent"); | |
|
283 | PyErr_Clear(); | |
|
284 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
304 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
305 | static PyObject* name = PyString_FromString("closeEvent"); | |
|
306 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
307 | if (obj) { | |
|
285 | 308 | static const char* argumentList[] ={"" , "QCloseEvent*"}; |
|
286 | 309 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
287 | void* args[2] = {NULL, (void*)&event}; | |
|
310 | void* args[2] = {NULL, (void*)&event0}; | |
|
288 | 311 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
289 | 312 | if (result) { Py_DECREF(result); } |
|
290 | 313 | Py_DECREF(obj); |
|
291 | 314 | return; |
|
315 | } else { | |
|
316 | PyErr_Clear(); | |
|
292 | 317 | } |
|
293 | 318 | } |
|
294 | socexplorerplugin::closeEvent(event); | |
|
319 | socexplorerplugin::closeEvent(event0); | |
|
295 | 320 | } |
|
296 | 321 | void PythonQtShell_socexplorerplugin::closeMe() |
|
297 | 322 | { |
|
298 | if (_wrapper) { | |
|
299 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "closeMe"); | |
|
300 | PyErr_Clear(); | |
|
301 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
323 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
324 | static PyObject* name = PyString_FromString("closeMe"); | |
|
325 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
326 | if (obj) { | |
|
302 | 327 | static const char* argumentList[] ={""}; |
|
303 | 328 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
304 | 329 | void* args[1] = {NULL}; |
@@ -306,16 +331,18 if (_wrapper) { | |||
|
306 | 331 | if (result) { Py_DECREF(result); } |
|
307 | 332 | Py_DECREF(obj); |
|
308 | 333 | return; |
|
334 | } else { | |
|
335 | PyErr_Clear(); | |
|
309 | 336 | } |
|
310 | 337 | } |
|
311 | 338 | socexplorerplugin::closeMe(); |
|
312 | 339 | } |
|
313 | 340 | void PythonQtShell_socexplorerplugin::contextMenuEvent(QContextMenuEvent* arg__1) |
|
314 | 341 | { |
|
315 | if (_wrapper) { | |
|
316 |
PyObject* |
|
|
317 | PyErr_Clear(); | |
|
318 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
342 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
343 | static PyObject* name = PyString_FromString("contextMenuEvent"); | |
|
344 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
345 | if (obj) { | |
|
319 | 346 | static const char* argumentList[] ={"" , "QContextMenuEvent*"}; |
|
320 | 347 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
321 | 348 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -323,16 +350,18 if (_wrapper) { | |||
|
323 | 350 | if (result) { Py_DECREF(result); } |
|
324 | 351 | Py_DECREF(obj); |
|
325 | 352 | return; |
|
353 | } else { | |
|
354 | PyErr_Clear(); | |
|
326 | 355 | } |
|
327 | 356 | } |
|
328 | 357 | socexplorerplugin::contextMenuEvent(arg__1); |
|
329 | 358 | } |
|
330 | 359 | void PythonQtShell_socexplorerplugin::customEvent(QEvent* arg__1) |
|
331 | 360 | { |
|
332 | if (_wrapper) { | |
|
333 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "customEvent"); | |
|
334 | PyErr_Clear(); | |
|
335 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
361 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
362 | static PyObject* name = PyString_FromString("customEvent"); | |
|
363 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
364 | if (obj) { | |
|
336 | 365 | static const char* argumentList[] ={"" , "QEvent*"}; |
|
337 | 366 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
338 | 367 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -340,16 +369,18 if (_wrapper) { | |||
|
340 | 369 | if (result) { Py_DECREF(result); } |
|
341 | 370 | Py_DECREF(obj); |
|
342 | 371 | return; |
|
372 | } else { | |
|
373 | PyErr_Clear(); | |
|
343 | 374 | } |
|
344 | 375 | } |
|
345 | 376 | socexplorerplugin::customEvent(arg__1); |
|
346 | 377 | } |
|
347 | 378 | int PythonQtShell_socexplorerplugin::devType() const |
|
348 | 379 | { |
|
349 | if (_wrapper) { | |
|
350 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "devType"); | |
|
351 | PyErr_Clear(); | |
|
352 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
380 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
381 | static PyObject* name = PyString_FromString("devType"); | |
|
382 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
383 | if (obj) { | |
|
353 | 384 | static const char* argumentList[] ={"int"}; |
|
354 | 385 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
355 | 386 | int returnValue; |
@@ -368,16 +399,18 if (_wrapper) { | |||
|
368 | 399 | if (result) { Py_DECREF(result); } |
|
369 | 400 | Py_DECREF(obj); |
|
370 | 401 | return returnValue; |
|
402 | } else { | |
|
403 | PyErr_Clear(); | |
|
371 | 404 | } |
|
372 | 405 | } |
|
373 | 406 | return socexplorerplugin::devType(); |
|
374 | 407 | } |
|
375 | 408 | void PythonQtShell_socexplorerplugin::dragEnterEvent(QDragEnterEvent* arg__1) |
|
376 | 409 | { |
|
377 | if (_wrapper) { | |
|
378 |
PyObject* |
|
|
379 | PyErr_Clear(); | |
|
380 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
410 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
411 | static PyObject* name = PyString_FromString("dragEnterEvent"); | |
|
412 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
413 | if (obj) { | |
|
381 | 414 | static const char* argumentList[] ={"" , "QDragEnterEvent*"}; |
|
382 | 415 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
383 | 416 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -385,16 +418,18 if (_wrapper) { | |||
|
385 | 418 | if (result) { Py_DECREF(result); } |
|
386 | 419 | Py_DECREF(obj); |
|
387 | 420 | return; |
|
421 | } else { | |
|
422 | PyErr_Clear(); | |
|
388 | 423 | } |
|
389 | 424 | } |
|
390 | 425 | socexplorerplugin::dragEnterEvent(arg__1); |
|
391 | 426 | } |
|
392 | 427 | void PythonQtShell_socexplorerplugin::dragLeaveEvent(QDragLeaveEvent* arg__1) |
|
393 | 428 | { |
|
394 | if (_wrapper) { | |
|
395 |
PyObject* |
|
|
396 | PyErr_Clear(); | |
|
397 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
429 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
430 | static PyObject* name = PyString_FromString("dragLeaveEvent"); | |
|
431 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
432 | if (obj) { | |
|
398 | 433 | static const char* argumentList[] ={"" , "QDragLeaveEvent*"}; |
|
399 | 434 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
400 | 435 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -402,16 +437,18 if (_wrapper) { | |||
|
402 | 437 | if (result) { Py_DECREF(result); } |
|
403 | 438 | Py_DECREF(obj); |
|
404 | 439 | return; |
|
440 | } else { | |
|
441 | PyErr_Clear(); | |
|
405 | 442 | } |
|
406 | 443 | } |
|
407 | 444 | socexplorerplugin::dragLeaveEvent(arg__1); |
|
408 | 445 | } |
|
409 | 446 | void PythonQtShell_socexplorerplugin::dragMoveEvent(QDragMoveEvent* arg__1) |
|
410 | 447 | { |
|
411 | if (_wrapper) { | |
|
412 |
PyObject* |
|
|
413 | PyErr_Clear(); | |
|
414 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
448 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
449 | static PyObject* name = PyString_FromString("dragMoveEvent"); | |
|
450 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
451 | if (obj) { | |
|
415 | 452 | static const char* argumentList[] ={"" , "QDragMoveEvent*"}; |
|
416 | 453 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
417 | 454 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -419,16 +456,18 if (_wrapper) { | |||
|
419 | 456 | if (result) { Py_DECREF(result); } |
|
420 | 457 | Py_DECREF(obj); |
|
421 | 458 | return; |
|
459 | } else { | |
|
460 | PyErr_Clear(); | |
|
422 | 461 | } |
|
423 | 462 | } |
|
424 | 463 | socexplorerplugin::dragMoveEvent(arg__1); |
|
425 | 464 | } |
|
426 | 465 | void PythonQtShell_socexplorerplugin::dropEvent(QDropEvent* arg__1) |
|
427 | 466 | { |
|
428 | if (_wrapper) { | |
|
429 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "dropEvent"); | |
|
430 | PyErr_Clear(); | |
|
431 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
467 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
468 | static PyObject* name = PyString_FromString("dropEvent"); | |
|
469 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
470 | if (obj) { | |
|
432 | 471 | static const char* argumentList[] ={"" , "QDropEvent*"}; |
|
433 | 472 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
434 | 473 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -436,16 +475,78 if (_wrapper) { | |||
|
436 | 475 | if (result) { Py_DECREF(result); } |
|
437 | 476 | Py_DECREF(obj); |
|
438 | 477 | return; |
|
478 | } else { | |
|
479 | PyErr_Clear(); | |
|
439 | 480 | } |
|
440 | 481 | } |
|
441 | 482 | socexplorerplugin::dropEvent(arg__1); |
|
442 | 483 | } |
|
484 | bool PythonQtShell_socexplorerplugin::dumpMemory(unsigned int address0, unsigned int count1, QString file2) | |
|
485 | { | |
|
486 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
487 | static PyObject* name = PyString_FromString("dumpMemory"); | |
|
488 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
489 | if (obj) { | |
|
490 | static const char* argumentList[] ={"bool" , "unsigned int" , "unsigned int" , "QString"}; | |
|
491 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(4, argumentList); | |
|
492 | bool returnValue; | |
|
493 | void* args[4] = {NULL, (void*)&address0, (void*)&count1, (void*)&file2}; | |
|
494 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); | |
|
495 | if (result) { | |
|
496 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); | |
|
497 | if (args[0]!=&returnValue) { | |
|
498 | if (args[0]==NULL) { | |
|
499 | PythonQt::priv()->handleVirtualOverloadReturnError("dumpMemory", methodInfo, result); | |
|
500 | } else { | |
|
501 | returnValue = *((bool*)args[0]); | |
|
502 | } | |
|
503 | } | |
|
504 | } | |
|
505 | if (result) { Py_DECREF(result); } | |
|
506 | Py_DECREF(obj); | |
|
507 | return returnValue; | |
|
508 | } else { | |
|
509 | PyErr_Clear(); | |
|
510 | } | |
|
511 | } | |
|
512 | return socexplorerplugin::dumpMemory(address0, count1, file2); | |
|
513 | } | |
|
514 | bool PythonQtShell_socexplorerplugin::dumpMemory(unsigned int address0, unsigned int count1, QString file2, const QString& format3) | |
|
515 | { | |
|
516 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
517 | static PyObject* name = PyString_FromString("dumpMemory"); | |
|
518 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
519 | if (obj) { | |
|
520 | static const char* argumentList[] ={"bool" , "unsigned int" , "unsigned int" , "QString" , "const QString&"}; | |
|
521 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(5, argumentList); | |
|
522 | bool returnValue; | |
|
523 | void* args[5] = {NULL, (void*)&address0, (void*)&count1, (void*)&file2, (void*)&format3}; | |
|
524 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); | |
|
525 | if (result) { | |
|
526 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); | |
|
527 | if (args[0]!=&returnValue) { | |
|
528 | if (args[0]==NULL) { | |
|
529 | PythonQt::priv()->handleVirtualOverloadReturnError("dumpMemory", methodInfo, result); | |
|
530 | } else { | |
|
531 | returnValue = *((bool*)args[0]); | |
|
532 | } | |
|
533 | } | |
|
534 | } | |
|
535 | if (result) { Py_DECREF(result); } | |
|
536 | Py_DECREF(obj); | |
|
537 | return returnValue; | |
|
538 | } else { | |
|
539 | PyErr_Clear(); | |
|
540 | } | |
|
541 | } | |
|
542 | return socexplorerplugin::dumpMemory(address0, count1, file2, format3); | |
|
543 | } | |
|
443 | 544 | void PythonQtShell_socexplorerplugin::enterEvent(QEvent* arg__1) |
|
444 | 545 | { |
|
445 | if (_wrapper) { | |
|
446 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "enterEvent"); | |
|
447 | PyErr_Clear(); | |
|
448 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
546 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
547 | static PyObject* name = PyString_FromString("enterEvent"); | |
|
548 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
549 | if (obj) { | |
|
449 | 550 | static const char* argumentList[] ={"" , "QEvent*"}; |
|
450 | 551 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
451 | 552 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -453,20 +554,22 if (_wrapper) { | |||
|
453 | 554 | if (result) { Py_DECREF(result); } |
|
454 | 555 | Py_DECREF(obj); |
|
455 | 556 | return; |
|
557 | } else { | |
|
558 | PyErr_Clear(); | |
|
456 | 559 | } |
|
457 | 560 | } |
|
458 | 561 | socexplorerplugin::enterEvent(arg__1); |
|
459 | 562 | } |
|
460 | bool PythonQtShell_socexplorerplugin::event(QEvent* event) | |
|
563 | bool PythonQtShell_socexplorerplugin::event(QEvent* event0) | |
|
461 | 564 | { |
|
462 | if (_wrapper) { | |
|
463 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "event"); | |
|
464 | PyErr_Clear(); | |
|
465 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
565 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
566 | static PyObject* name = PyString_FromString("event"); | |
|
567 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
568 | if (obj) { | |
|
466 | 569 | static const char* argumentList[] ={"bool" , "QEvent*"}; |
|
467 | 570 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
468 | 571 | bool returnValue; |
|
469 | void* args[2] = {NULL, (void*)&event}; | |
|
572 | void* args[2] = {NULL, (void*)&event0}; | |
|
470 | 573 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
471 | 574 | if (result) { |
|
472 | 575 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); |
@@ -481,16 +584,18 if (_wrapper) { | |||
|
481 | 584 | if (result) { Py_DECREF(result); } |
|
482 | 585 | Py_DECREF(obj); |
|
483 | 586 | return returnValue; |
|
587 | } else { | |
|
588 | PyErr_Clear(); | |
|
484 | 589 | } |
|
485 | 590 | } |
|
486 | return socexplorerplugin::event(event); | |
|
591 | return socexplorerplugin::event(event0); | |
|
487 | 592 | } |
|
488 | 593 | bool PythonQtShell_socexplorerplugin::eventFilter(QObject* arg__1, QEvent* arg__2) |
|
489 | 594 | { |
|
490 | if (_wrapper) { | |
|
491 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "eventFilter"); | |
|
492 | PyErr_Clear(); | |
|
493 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
595 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
596 | static PyObject* name = PyString_FromString("eventFilter"); | |
|
597 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
598 | if (obj) { | |
|
494 | 599 | static const char* argumentList[] ={"bool" , "QObject*" , "QEvent*"}; |
|
495 | 600 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(3, argumentList); |
|
496 | 601 | bool returnValue; |
@@ -509,16 +614,18 if (_wrapper) { | |||
|
509 | 614 | if (result) { Py_DECREF(result); } |
|
510 | 615 | Py_DECREF(obj); |
|
511 | 616 | return returnValue; |
|
617 | } else { | |
|
618 | PyErr_Clear(); | |
|
512 | 619 | } |
|
513 | 620 | } |
|
514 | 621 | return socexplorerplugin::eventFilter(arg__1, arg__2); |
|
515 | 622 | } |
|
516 | 623 | void PythonQtShell_socexplorerplugin::focusInEvent(QFocusEvent* arg__1) |
|
517 | 624 | { |
|
518 | if (_wrapper) { | |
|
519 |
PyObject* |
|
|
520 | PyErr_Clear(); | |
|
521 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
625 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
626 | static PyObject* name = PyString_FromString("focusInEvent"); | |
|
627 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
628 | if (obj) { | |
|
522 | 629 | static const char* argumentList[] ={"" , "QFocusEvent*"}; |
|
523 | 630 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
524 | 631 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -526,20 +633,22 if (_wrapper) { | |||
|
526 | 633 | if (result) { Py_DECREF(result); } |
|
527 | 634 | Py_DECREF(obj); |
|
528 | 635 | return; |
|
636 | } else { | |
|
637 | PyErr_Clear(); | |
|
529 | 638 | } |
|
530 | 639 | } |
|
531 | 640 | socexplorerplugin::focusInEvent(arg__1); |
|
532 | 641 | } |
|
533 | bool PythonQtShell_socexplorerplugin::focusNextPrevChild(bool next) | |
|
642 | bool PythonQtShell_socexplorerplugin::focusNextPrevChild(bool next0) | |
|
534 | 643 | { |
|
535 | if (_wrapper) { | |
|
536 |
PyObject* |
|
|
537 | PyErr_Clear(); | |
|
538 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
644 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
645 | static PyObject* name = PyString_FromString("focusNextPrevChild"); | |
|
646 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
647 | if (obj) { | |
|
539 | 648 | static const char* argumentList[] ={"bool" , "bool"}; |
|
540 | 649 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
541 | 650 | bool returnValue; |
|
542 | void* args[2] = {NULL, (void*)&next}; | |
|
651 | void* args[2] = {NULL, (void*)&next0}; | |
|
543 | 652 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
544 | 653 | if (result) { |
|
545 | 654 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); |
@@ -554,16 +663,18 if (_wrapper) { | |||
|
554 | 663 | if (result) { Py_DECREF(result); } |
|
555 | 664 | Py_DECREF(obj); |
|
556 | 665 | return returnValue; |
|
666 | } else { | |
|
667 | PyErr_Clear(); | |
|
557 | 668 | } |
|
558 | 669 | } |
|
559 | return socexplorerplugin::focusNextPrevChild(next); | |
|
670 | return socexplorerplugin::focusNextPrevChild(next0); | |
|
560 | 671 | } |
|
561 | 672 | void PythonQtShell_socexplorerplugin::focusOutEvent(QFocusEvent* arg__1) |
|
562 | 673 | { |
|
563 | if (_wrapper) { | |
|
564 |
PyObject* |
|
|
565 | PyErr_Clear(); | |
|
566 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
674 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
675 | static PyObject* name = PyString_FromString("focusOutEvent"); | |
|
676 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
677 | if (obj) { | |
|
567 | 678 | static const char* argumentList[] ={"" , "QFocusEvent*"}; |
|
568 | 679 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
569 | 680 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -571,16 +682,18 if (_wrapper) { | |||
|
571 | 682 | if (result) { Py_DECREF(result); } |
|
572 | 683 | Py_DECREF(obj); |
|
573 | 684 | return; |
|
685 | } else { | |
|
686 | PyErr_Clear(); | |
|
574 | 687 | } |
|
575 | 688 | } |
|
576 | 689 | socexplorerplugin::focusOutEvent(arg__1); |
|
577 | 690 | } |
|
578 | 691 | bool PythonQtShell_socexplorerplugin::hasHeightForWidth() const |
|
579 | 692 | { |
|
580 | if (_wrapper) { | |
|
581 |
PyObject* |
|
|
582 | PyErr_Clear(); | |
|
583 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
693 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
694 | static PyObject* name = PyString_FromString("hasHeightForWidth"); | |
|
695 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
696 | if (obj) { | |
|
584 | 697 | static const char* argumentList[] ={"bool"}; |
|
585 | 698 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
586 | 699 | bool returnValue; |
@@ -599,16 +712,18 if (_wrapper) { | |||
|
599 | 712 | if (result) { Py_DECREF(result); } |
|
600 | 713 | Py_DECREF(obj); |
|
601 | 714 | return returnValue; |
|
715 | } else { | |
|
716 | PyErr_Clear(); | |
|
602 | 717 | } |
|
603 | 718 | } |
|
604 | 719 | return socexplorerplugin::hasHeightForWidth(); |
|
605 | 720 | } |
|
606 | 721 | int PythonQtShell_socexplorerplugin::heightForWidth(int arg__1) const |
|
607 | 722 | { |
|
608 | if (_wrapper) { | |
|
609 |
PyObject* |
|
|
610 | PyErr_Clear(); | |
|
611 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
723 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
724 | static PyObject* name = PyString_FromString("heightForWidth"); | |
|
725 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
726 | if (obj) { | |
|
612 | 727 | static const char* argumentList[] ={"int" , "int"}; |
|
613 | 728 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
614 | 729 | int returnValue; |
@@ -627,16 +742,18 if (_wrapper) { | |||
|
627 | 742 | if (result) { Py_DECREF(result); } |
|
628 | 743 | Py_DECREF(obj); |
|
629 | 744 | return returnValue; |
|
745 | } else { | |
|
746 | PyErr_Clear(); | |
|
630 | 747 | } |
|
631 | 748 | } |
|
632 | 749 | return socexplorerplugin::heightForWidth(arg__1); |
|
633 | 750 | } |
|
634 | 751 | void PythonQtShell_socexplorerplugin::hideEvent(QHideEvent* arg__1) |
|
635 | 752 | { |
|
636 | if (_wrapper) { | |
|
637 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "hideEvent"); | |
|
638 | PyErr_Clear(); | |
|
639 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
753 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
754 | static PyObject* name = PyString_FromString("hideEvent"); | |
|
755 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
756 | if (obj) { | |
|
640 | 757 | static const char* argumentList[] ={"" , "QHideEvent*"}; |
|
641 | 758 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
642 | 759 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -644,33 +761,37 if (_wrapper) { | |||
|
644 | 761 | if (result) { Py_DECREF(result); } |
|
645 | 762 | Py_DECREF(obj); |
|
646 | 763 | return; |
|
764 | } else { | |
|
765 | PyErr_Clear(); | |
|
647 | 766 | } |
|
648 | 767 | } |
|
649 | 768 | socexplorerplugin::hideEvent(arg__1); |
|
650 | 769 | } |
|
651 | void PythonQtShell_socexplorerplugin::initPainter(QPainter* painter) const | |
|
770 | void PythonQtShell_socexplorerplugin::initPainter(QPainter* painter0) const | |
|
652 | 771 | { |
|
653 | if (_wrapper) { | |
|
654 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "initPainter"); | |
|
655 | PyErr_Clear(); | |
|
656 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
772 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
773 | static PyObject* name = PyString_FromString("initPainter"); | |
|
774 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
775 | if (obj) { | |
|
657 | 776 | static const char* argumentList[] ={"" , "QPainter*"}; |
|
658 | 777 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
659 | void* args[2] = {NULL, (void*)&painter}; | |
|
778 | void* args[2] = {NULL, (void*)&painter0}; | |
|
660 | 779 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
661 | 780 | if (result) { Py_DECREF(result); } |
|
662 | 781 | Py_DECREF(obj); |
|
663 | 782 | return; |
|
783 | } else { | |
|
784 | PyErr_Clear(); | |
|
664 | 785 | } |
|
665 | 786 | } |
|
666 | socexplorerplugin::initPainter(painter); | |
|
787 | socexplorerplugin::initPainter(painter0); | |
|
667 | 788 | } |
|
668 | 789 | void PythonQtShell_socexplorerplugin::inputMethodEvent(QInputMethodEvent* arg__1) |
|
669 | 790 | { |
|
670 | if (_wrapper) { | |
|
671 |
PyObject* |
|
|
672 | PyErr_Clear(); | |
|
673 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
791 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
792 | static PyObject* name = PyString_FromString("inputMethodEvent"); | |
|
793 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
794 | if (obj) { | |
|
674 | 795 | static const char* argumentList[] ={"" , "QInputMethodEvent*"}; |
|
675 | 796 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
676 | 797 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -678,16 +799,18 if (_wrapper) { | |||
|
678 | 799 | if (result) { Py_DECREF(result); } |
|
679 | 800 | Py_DECREF(obj); |
|
680 | 801 | return; |
|
802 | } else { | |
|
803 | PyErr_Clear(); | |
|
681 | 804 | } |
|
682 | 805 | } |
|
683 | 806 | socexplorerplugin::inputMethodEvent(arg__1); |
|
684 | 807 | } |
|
685 | 808 | QVariant PythonQtShell_socexplorerplugin::inputMethodQuery(Qt::InputMethodQuery arg__1) const |
|
686 | 809 | { |
|
687 | if (_wrapper) { | |
|
688 |
PyObject* |
|
|
689 | PyErr_Clear(); | |
|
690 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
810 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
811 | static PyObject* name = PyString_FromString("inputMethodQuery"); | |
|
812 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
813 | if (obj) { | |
|
691 | 814 | static const char* argumentList[] ={"QVariant" , "Qt::InputMethodQuery"}; |
|
692 | 815 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
693 | 816 | QVariant returnValue; |
@@ -706,16 +829,18 if (_wrapper) { | |||
|
706 | 829 | if (result) { Py_DECREF(result); } |
|
707 | 830 | Py_DECREF(obj); |
|
708 | 831 | return returnValue; |
|
832 | } else { | |
|
833 | PyErr_Clear(); | |
|
709 | 834 | } |
|
710 | 835 | } |
|
711 | 836 | return socexplorerplugin::inputMethodQuery(arg__1); |
|
712 | 837 | } |
|
713 | 838 | int PythonQtShell_socexplorerplugin::isConnected() |
|
714 | 839 | { |
|
715 | if (_wrapper) { | |
|
716 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "isConnected"); | |
|
717 | PyErr_Clear(); | |
|
718 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
840 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
841 | static PyObject* name = PyString_FromString("isConnected"); | |
|
842 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
843 | if (obj) { | |
|
719 | 844 | static const char* argumentList[] ={"int"}; |
|
720 | 845 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
721 | 846 | int returnValue; |
@@ -734,16 +859,37 if (_wrapper) { | |||
|
734 | 859 | if (result) { Py_DECREF(result); } |
|
735 | 860 | Py_DECREF(obj); |
|
736 | 861 | return returnValue; |
|
862 | } else { | |
|
863 | PyErr_Clear(); | |
|
737 | 864 | } |
|
738 | 865 | } |
|
739 | 866 | return socexplorerplugin::isConnected(); |
|
740 | 867 | } |
|
741 | 868 | void PythonQtShell_socexplorerplugin::keyPressEvent(QKeyEvent* arg__1) |
|
742 | 869 | { |
|
743 | if (_wrapper) { | |
|
744 |
PyObject* |
|
|
870 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
871 | static PyObject* name = PyString_FromString("keyPressEvent"); | |
|
872 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
873 | if (obj) { | |
|
874 | static const char* argumentList[] ={"" , "QKeyEvent*"}; | |
|
875 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); | |
|
876 | void* args[2] = {NULL, (void*)&arg__1}; | |
|
877 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); | |
|
878 | if (result) { Py_DECREF(result); } | |
|
879 | Py_DECREF(obj); | |
|
880 | return; | |
|
881 | } else { | |
|
745 | 882 | PyErr_Clear(); |
|
746 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
883 | } | |
|
884 | } | |
|
885 | socexplorerplugin::keyPressEvent(arg__1); | |
|
886 | } | |
|
887 | void PythonQtShell_socexplorerplugin::keyReleaseEvent(QKeyEvent* arg__1) | |
|
888 | { | |
|
889 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
890 | static PyObject* name = PyString_FromString("keyReleaseEvent"); | |
|
891 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
892 | if (obj) { | |
|
747 | 893 | static const char* argumentList[] ={"" , "QKeyEvent*"}; |
|
748 | 894 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
749 | 895 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -751,33 +897,18 if (_wrapper) { | |||
|
751 | 897 | if (result) { Py_DECREF(result); } |
|
752 | 898 | Py_DECREF(obj); |
|
753 | 899 | return; |
|
754 | } | |
|
755 | } | |
|
756 | socexplorerplugin::keyPressEvent(arg__1); | |
|
757 | } | |
|
758 | void PythonQtShell_socexplorerplugin::keyReleaseEvent(QKeyEvent* arg__1) | |
|
759 | { | |
|
760 | if (_wrapper) { | |
|
761 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "keyReleaseEvent"); | |
|
900 | } else { | |
|
762 | 901 | PyErr_Clear(); |
|
763 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
764 | static const char* argumentList[] ={"" , "QKeyEvent*"}; | |
|
765 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); | |
|
766 | void* args[2] = {NULL, (void*)&arg__1}; | |
|
767 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); | |
|
768 | if (result) { Py_DECREF(result); } | |
|
769 | Py_DECREF(obj); | |
|
770 | return; | |
|
771 | 902 | } |
|
772 | 903 | } |
|
773 | 904 | socexplorerplugin::keyReleaseEvent(arg__1); |
|
774 | 905 | } |
|
775 | 906 | void PythonQtShell_socexplorerplugin::leaveEvent(QEvent* arg__1) |
|
776 | 907 | { |
|
777 | if (_wrapper) { | |
|
778 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "leaveEvent"); | |
|
779 | PyErr_Clear(); | |
|
780 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
908 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
909 | static PyObject* name = PyString_FromString("leaveEvent"); | |
|
910 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
911 | if (obj) { | |
|
781 | 912 | static const char* argumentList[] ={"" , "QEvent*"}; |
|
782 | 913 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
783 | 914 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -785,16 +916,78 if (_wrapper) { | |||
|
785 | 916 | if (result) { Py_DECREF(result); } |
|
786 | 917 | Py_DECREF(obj); |
|
787 | 918 | return; |
|
919 | } else { | |
|
920 | PyErr_Clear(); | |
|
788 | 921 | } |
|
789 | 922 | } |
|
790 | 923 | socexplorerplugin::leaveEvent(arg__1); |
|
791 | 924 | } |
|
925 | bool PythonQtShell_socexplorerplugin::loadbin(unsigned int address0, QString file1) | |
|
926 | { | |
|
927 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
928 | static PyObject* name = PyString_FromString("loadbin"); | |
|
929 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
930 | if (obj) { | |
|
931 | static const char* argumentList[] ={"bool" , "unsigned int" , "QString"}; | |
|
932 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(3, argumentList); | |
|
933 | bool returnValue; | |
|
934 | void* args[3] = {NULL, (void*)&address0, (void*)&file1}; | |
|
935 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); | |
|
936 | if (result) { | |
|
937 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); | |
|
938 | if (args[0]!=&returnValue) { | |
|
939 | if (args[0]==NULL) { | |
|
940 | PythonQt::priv()->handleVirtualOverloadReturnError("loadbin", methodInfo, result); | |
|
941 | } else { | |
|
942 | returnValue = *((bool*)args[0]); | |
|
943 | } | |
|
944 | } | |
|
945 | } | |
|
946 | if (result) { Py_DECREF(result); } | |
|
947 | Py_DECREF(obj); | |
|
948 | return returnValue; | |
|
949 | } else { | |
|
950 | PyErr_Clear(); | |
|
951 | } | |
|
952 | } | |
|
953 | return socexplorerplugin::loadbin(address0, file1); | |
|
954 | } | |
|
955 | bool PythonQtShell_socexplorerplugin::memSet(unsigned int address0, int value1, unsigned int count2) | |
|
956 | { | |
|
957 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
958 | static PyObject* name = PyString_FromString("memSet"); | |
|
959 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
960 | if (obj) { | |
|
961 | static const char* argumentList[] ={"bool" , "unsigned int" , "int" , "unsigned int"}; | |
|
962 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(4, argumentList); | |
|
963 | bool returnValue; | |
|
964 | void* args[4] = {NULL, (void*)&address0, (void*)&value1, (void*)&count2}; | |
|
965 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); | |
|
966 | if (result) { | |
|
967 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); | |
|
968 | if (args[0]!=&returnValue) { | |
|
969 | if (args[0]==NULL) { | |
|
970 | PythonQt::priv()->handleVirtualOverloadReturnError("memSet", methodInfo, result); | |
|
971 | } else { | |
|
972 | returnValue = *((bool*)args[0]); | |
|
973 | } | |
|
974 | } | |
|
975 | } | |
|
976 | if (result) { Py_DECREF(result); } | |
|
977 | Py_DECREF(obj); | |
|
978 | return returnValue; | |
|
979 | } else { | |
|
980 | PyErr_Clear(); | |
|
981 | } | |
|
982 | } | |
|
983 | return socexplorerplugin::memSet(address0, value1, count2); | |
|
984 | } | |
|
792 | 985 | int PythonQtShell_socexplorerplugin::metric(QPaintDevice::PaintDeviceMetric arg__1) const |
|
793 | 986 | { |
|
794 | if (_wrapper) { | |
|
795 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "metric"); | |
|
796 | PyErr_Clear(); | |
|
797 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
987 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
988 | static PyObject* name = PyString_FromString("metric"); | |
|
989 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
990 | if (obj) { | |
|
798 | 991 | static const char* argumentList[] ={"int" , "QPaintDevice::PaintDeviceMetric"}; |
|
799 | 992 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
800 | 993 | int returnValue; |
@@ -813,16 +1006,18 if (_wrapper) { | |||
|
813 | 1006 | if (result) { Py_DECREF(result); } |
|
814 | 1007 | Py_DECREF(obj); |
|
815 | 1008 | return returnValue; |
|
1009 | } else { | |
|
1010 | PyErr_Clear(); | |
|
816 | 1011 | } |
|
817 | 1012 | } |
|
818 | 1013 | return socexplorerplugin::metric(arg__1); |
|
819 | 1014 | } |
|
820 | 1015 | QSize PythonQtShell_socexplorerplugin::minimumSizeHint() const |
|
821 | 1016 | { |
|
822 | if (_wrapper) { | |
|
823 |
PyObject* |
|
|
824 | PyErr_Clear(); | |
|
825 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1017 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1018 | static PyObject* name = PyString_FromString("getMinimumSizeHint"); | |
|
1019 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1020 | if (obj) { | |
|
826 | 1021 | static const char* argumentList[] ={"QSize"}; |
|
827 | 1022 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
828 | 1023 | QSize returnValue; |
@@ -841,16 +1036,18 if (_wrapper) { | |||
|
841 | 1036 | if (result) { Py_DECREF(result); } |
|
842 | 1037 | Py_DECREF(obj); |
|
843 | 1038 | return returnValue; |
|
1039 | } else { | |
|
1040 | PyErr_Clear(); | |
|
844 | 1041 | } |
|
845 | 1042 | } |
|
846 | 1043 | return socexplorerplugin::minimumSizeHint(); |
|
847 | 1044 | } |
|
848 | 1045 | void PythonQtShell_socexplorerplugin::mouseDoubleClickEvent(QMouseEvent* arg__1) |
|
849 | 1046 | { |
|
850 | if (_wrapper) { | |
|
851 |
PyObject* |
|
|
852 | PyErr_Clear(); | |
|
853 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1047 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1048 | static PyObject* name = PyString_FromString("mouseDoubleClickEvent"); | |
|
1049 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1050 | if (obj) { | |
|
854 | 1051 | static const char* argumentList[] ={"" , "QMouseEvent*"}; |
|
855 | 1052 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
856 | 1053 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -858,16 +1055,18 if (_wrapper) { | |||
|
858 | 1055 | if (result) { Py_DECREF(result); } |
|
859 | 1056 | Py_DECREF(obj); |
|
860 | 1057 | return; |
|
1058 | } else { | |
|
1059 | PyErr_Clear(); | |
|
861 | 1060 | } |
|
862 | 1061 | } |
|
863 | 1062 | socexplorerplugin::mouseDoubleClickEvent(arg__1); |
|
864 | 1063 | } |
|
865 | 1064 | void PythonQtShell_socexplorerplugin::mouseMoveEvent(QMouseEvent* arg__1) |
|
866 | 1065 | { |
|
867 | if (_wrapper) { | |
|
868 |
PyObject* |
|
|
869 | PyErr_Clear(); | |
|
870 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1066 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1067 | static PyObject* name = PyString_FromString("mouseMoveEvent"); | |
|
1068 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1069 | if (obj) { | |
|
871 | 1070 | static const char* argumentList[] ={"" , "QMouseEvent*"}; |
|
872 | 1071 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
873 | 1072 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -875,16 +1074,18 if (_wrapper) { | |||
|
875 | 1074 | if (result) { Py_DECREF(result); } |
|
876 | 1075 | Py_DECREF(obj); |
|
877 | 1076 | return; |
|
1077 | } else { | |
|
1078 | PyErr_Clear(); | |
|
878 | 1079 | } |
|
879 | 1080 | } |
|
880 | 1081 | socexplorerplugin::mouseMoveEvent(arg__1); |
|
881 | 1082 | } |
|
882 | 1083 | void PythonQtShell_socexplorerplugin::mousePressEvent(QMouseEvent* arg__1) |
|
883 | 1084 | { |
|
884 | if (_wrapper) { | |
|
885 |
PyObject* |
|
|
886 | PyErr_Clear(); | |
|
887 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1085 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1086 | static PyObject* name = PyString_FromString("mousePressEvent"); | |
|
1087 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1088 | if (obj) { | |
|
888 | 1089 | static const char* argumentList[] ={"" , "QMouseEvent*"}; |
|
889 | 1090 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
890 | 1091 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -892,16 +1093,18 if (_wrapper) { | |||
|
892 | 1093 | if (result) { Py_DECREF(result); } |
|
893 | 1094 | Py_DECREF(obj); |
|
894 | 1095 | return; |
|
1096 | } else { | |
|
1097 | PyErr_Clear(); | |
|
895 | 1098 | } |
|
896 | 1099 | } |
|
897 | 1100 | socexplorerplugin::mousePressEvent(arg__1); |
|
898 | 1101 | } |
|
899 | 1102 | void PythonQtShell_socexplorerplugin::mouseReleaseEvent(QMouseEvent* arg__1) |
|
900 | 1103 | { |
|
901 | if (_wrapper) { | |
|
902 |
PyObject* |
|
|
903 | PyErr_Clear(); | |
|
904 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1104 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1105 | static PyObject* name = PyString_FromString("mouseReleaseEvent"); | |
|
1106 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1107 | if (obj) { | |
|
905 | 1108 | static const char* argumentList[] ={"" , "QMouseEvent*"}; |
|
906 | 1109 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
907 | 1110 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -909,16 +1112,18 if (_wrapper) { | |||
|
909 | 1112 | if (result) { Py_DECREF(result); } |
|
910 | 1113 | Py_DECREF(obj); |
|
911 | 1114 | return; |
|
1115 | } else { | |
|
1116 | PyErr_Clear(); | |
|
912 | 1117 | } |
|
913 | 1118 | } |
|
914 | 1119 | socexplorerplugin::mouseReleaseEvent(arg__1); |
|
915 | 1120 | } |
|
916 | 1121 | void PythonQtShell_socexplorerplugin::moveEvent(QMoveEvent* arg__1) |
|
917 | 1122 | { |
|
918 | if (_wrapper) { | |
|
919 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "moveEvent"); | |
|
920 | PyErr_Clear(); | |
|
921 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1123 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1124 | static PyObject* name = PyString_FromString("moveEvent"); | |
|
1125 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1126 | if (obj) { | |
|
922 | 1127 | static const char* argumentList[] ={"" , "QMoveEvent*"}; |
|
923 | 1128 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
924 | 1129 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -926,20 +1131,22 if (_wrapper) { | |||
|
926 | 1131 | if (result) { Py_DECREF(result); } |
|
927 | 1132 | Py_DECREF(obj); |
|
928 | 1133 | return; |
|
1134 | } else { | |
|
1135 | PyErr_Clear(); | |
|
929 | 1136 | } |
|
930 | 1137 | } |
|
931 | 1138 | socexplorerplugin::moveEvent(arg__1); |
|
932 | 1139 | } |
|
933 | bool PythonQtShell_socexplorerplugin::nativeEvent(const QByteArray& eventType, void* message, long* result) | |
|
1140 | bool PythonQtShell_socexplorerplugin::nativeEvent(const QByteArray& eventType0, void* message1, long* result2) | |
|
934 | 1141 | { |
|
935 | if (_wrapper) { | |
|
936 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "nativeEvent"); | |
|
937 | PyErr_Clear(); | |
|
938 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1142 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1143 | static PyObject* name = PyString_FromString("nativeEvent"); | |
|
1144 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1145 | if (obj) { | |
|
939 | 1146 | static const char* argumentList[] ={"bool" , "const QByteArray&" , "void*" , "long*"}; |
|
940 | 1147 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(4, argumentList); |
|
941 | 1148 | bool returnValue; |
|
942 | void* args[4] = {NULL, (void*)&eventType, (void*)&message, (void*)&result}; | |
|
1149 | void* args[4] = {NULL, (void*)&eventType0, (void*)&message1, (void*)&result2}; | |
|
943 | 1150 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
944 | 1151 | if (result) { |
|
945 | 1152 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); |
@@ -954,16 +1161,18 if (_wrapper) { | |||
|
954 | 1161 | if (result) { Py_DECREF(result); } |
|
955 | 1162 | Py_DECREF(obj); |
|
956 | 1163 | return returnValue; |
|
1164 | } else { | |
|
1165 | PyErr_Clear(); | |
|
957 | 1166 | } |
|
958 | 1167 | } |
|
959 | return socexplorerplugin::nativeEvent(eventType, message, result); | |
|
1168 | return socexplorerplugin::nativeEvent(eventType0, message1, result2); | |
|
960 | 1169 | } |
|
961 | 1170 | QPaintEngine* PythonQtShell_socexplorerplugin::paintEngine() const |
|
962 | 1171 | { |
|
963 | if (_wrapper) { | |
|
964 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "paintEngine"); | |
|
965 | PyErr_Clear(); | |
|
966 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1172 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1173 | static PyObject* name = PyString_FromString("paintEngine"); | |
|
1174 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1175 | if (obj) { | |
|
967 | 1176 | static const char* argumentList[] ={"QPaintEngine*"}; |
|
968 | 1177 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
969 | 1178 | QPaintEngine* returnValue; |
@@ -982,33 +1191,37 if (_wrapper) { | |||
|
982 | 1191 | if (result) { Py_DECREF(result); } |
|
983 | 1192 | Py_DECREF(obj); |
|
984 | 1193 | return returnValue; |
|
1194 | } else { | |
|
1195 | PyErr_Clear(); | |
|
985 | 1196 | } |
|
986 | 1197 | } |
|
987 | 1198 | return socexplorerplugin::paintEngine(); |
|
988 | 1199 | } |
|
989 | void PythonQtShell_socexplorerplugin::paintEvent(QPaintEvent* event) | |
|
1200 | void PythonQtShell_socexplorerplugin::paintEvent(QPaintEvent* event0) | |
|
990 | 1201 | { |
|
991 | if (_wrapper) { | |
|
992 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "paintEvent"); | |
|
993 | PyErr_Clear(); | |
|
994 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1202 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1203 | static PyObject* name = PyString_FromString("paintEvent"); | |
|
1204 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1205 | if (obj) { | |
|
995 | 1206 | static const char* argumentList[] ={"" , "QPaintEvent*"}; |
|
996 | 1207 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
997 | void* args[2] = {NULL, (void*)&event}; | |
|
1208 | void* args[2] = {NULL, (void*)&event0}; | |
|
998 | 1209 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
999 | 1210 | if (result) { Py_DECREF(result); } |
|
1000 | 1211 | Py_DECREF(obj); |
|
1001 | 1212 | return; |
|
1213 | } else { | |
|
1214 | PyErr_Clear(); | |
|
1002 | 1215 | } |
|
1003 | 1216 | } |
|
1004 | socexplorerplugin::paintEvent(event); | |
|
1217 | socexplorerplugin::paintEvent(event0); | |
|
1005 | 1218 | } |
|
1006 | 1219 | void PythonQtShell_socexplorerplugin::postInstantiationTrigger() |
|
1007 | 1220 | { |
|
1008 | if (_wrapper) { | |
|
1009 |
PyObject* |
|
|
1010 | PyErr_Clear(); | |
|
1011 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1221 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1222 | static PyObject* name = PyString_FromString("postInstantiationTrigger"); | |
|
1223 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1224 | if (obj) { | |
|
1012 | 1225 | static const char* argumentList[] ={""}; |
|
1013 | 1226 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
1014 | 1227 | void* args[1] = {NULL}; |
@@ -1016,20 +1229,22 if (_wrapper) { | |||
|
1016 | 1229 | if (result) { Py_DECREF(result); } |
|
1017 | 1230 | Py_DECREF(obj); |
|
1018 | 1231 | return; |
|
1232 | } else { | |
|
1233 | PyErr_Clear(); | |
|
1019 | 1234 | } |
|
1020 | 1235 | } |
|
1021 | 1236 | socexplorerplugin::postInstantiationTrigger(); |
|
1022 | 1237 | } |
|
1023 | QPaintDevice* PythonQtShell_socexplorerplugin::redirected(QPoint* offset) const | |
|
1238 | QPaintDevice* PythonQtShell_socexplorerplugin::redirected(QPoint* offset0) const | |
|
1024 | 1239 | { |
|
1025 | if (_wrapper) { | |
|
1026 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "redirected"); | |
|
1027 | PyErr_Clear(); | |
|
1028 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1240 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1241 | static PyObject* name = PyString_FromString("redirected"); | |
|
1242 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1243 | if (obj) { | |
|
1029 | 1244 | static const char* argumentList[] ={"QPaintDevice*" , "QPoint*"}; |
|
1030 | 1245 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
1031 | 1246 | QPaintDevice* returnValue; |
|
1032 | void* args[2] = {NULL, (void*)&offset}; | |
|
1247 | void* args[2] = {NULL, (void*)&offset0}; | |
|
1033 | 1248 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
1034 | 1249 | if (result) { |
|
1035 | 1250 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); |
@@ -1044,20 +1259,22 if (_wrapper) { | |||
|
1044 | 1259 | if (result) { Py_DECREF(result); } |
|
1045 | 1260 | Py_DECREF(obj); |
|
1046 | 1261 | return returnValue; |
|
1262 | } else { | |
|
1263 | PyErr_Clear(); | |
|
1047 | 1264 | } |
|
1048 | 1265 | } |
|
1049 | return socexplorerplugin::redirected(offset); | |
|
1266 | return socexplorerplugin::redirected(offset0); | |
|
1050 | 1267 | } |
|
1051 | int PythonQtShell_socexplorerplugin::registermenu(QMenu* menu) | |
|
1268 | int PythonQtShell_socexplorerplugin::registermenu(QMenu* menu0) | |
|
1052 | 1269 | { |
|
1053 | if (_wrapper) { | |
|
1054 |
PyObject* |
|
|
1055 | PyErr_Clear(); | |
|
1056 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1270 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1271 | static PyObject* name = PyString_FromString("registermenu"); | |
|
1272 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1273 | if (obj) { | |
|
1057 | 1274 | static const char* argumentList[] ={"int" , "QMenu*"}; |
|
1058 | 1275 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
1059 | 1276 | int returnValue; |
|
1060 | void* args[2] = {NULL, (void*)&menu}; | |
|
1277 | void* args[2] = {NULL, (void*)&menu0}; | |
|
1061 | 1278 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
1062 | 1279 | if (result) { |
|
1063 | 1280 | args[0] = PythonQtConv::ConvertPythonToQt(methodInfo->parameters().at(0), result, false, NULL, &returnValue); |
@@ -1072,16 +1289,18 if (_wrapper) { | |||
|
1072 | 1289 | if (result) { Py_DECREF(result); } |
|
1073 | 1290 | Py_DECREF(obj); |
|
1074 | 1291 | return returnValue; |
|
1292 | } else { | |
|
1293 | PyErr_Clear(); | |
|
1075 | 1294 | } |
|
1076 | 1295 | } |
|
1077 | return socexplorerplugin::registermenu(menu); | |
|
1296 | return socexplorerplugin::registermenu(menu0); | |
|
1078 | 1297 | } |
|
1079 | 1298 | void PythonQtShell_socexplorerplugin::resizeEvent(QResizeEvent* arg__1) |
|
1080 | 1299 | { |
|
1081 | if (_wrapper) { | |
|
1082 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "resizeEvent"); | |
|
1083 | PyErr_Clear(); | |
|
1084 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1300 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1301 | static PyObject* name = PyString_FromString("resizeEvent"); | |
|
1302 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1303 | if (obj) { | |
|
1085 | 1304 | static const char* argumentList[] ={"" , "QResizeEvent*"}; |
|
1086 | 1305 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
1087 | 1306 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -1089,50 +1308,56 if (_wrapper) { | |||
|
1089 | 1308 | if (result) { Py_DECREF(result); } |
|
1090 | 1309 | Py_DECREF(obj); |
|
1091 | 1310 | return; |
|
1311 | } else { | |
|
1312 | PyErr_Clear(); | |
|
1092 | 1313 | } |
|
1093 | 1314 | } |
|
1094 | 1315 | socexplorerplugin::resizeEvent(arg__1); |
|
1095 | 1316 | } |
|
1096 | void PythonQtShell_socexplorerplugin::setBaseAddress(unsigned int baseAddress) | |
|
1317 | void PythonQtShell_socexplorerplugin::setBaseAddress(unsigned int baseAddress0) | |
|
1097 | 1318 | { |
|
1098 | if (_wrapper) { | |
|
1099 |
PyObject* |
|
|
1100 | PyErr_Clear(); | |
|
1101 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1319 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1320 | static PyObject* name = PyString_FromString("setBaseAddress"); | |
|
1321 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1322 | if (obj) { | |
|
1102 | 1323 | static const char* argumentList[] ={"" , "unsigned int"}; |
|
1103 | 1324 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
1104 | void* args[2] = {NULL, (void*)&baseAddress}; | |
|
1325 | void* args[2] = {NULL, (void*)&baseAddress0}; | |
|
1105 | 1326 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
1106 | 1327 | if (result) { Py_DECREF(result); } |
|
1107 | 1328 | Py_DECREF(obj); |
|
1108 | 1329 | return; |
|
1330 | } else { | |
|
1331 | PyErr_Clear(); | |
|
1109 | 1332 | } |
|
1110 | 1333 | } |
|
1111 | socexplorerplugin::setBaseAddress(baseAddress); | |
|
1334 | socexplorerplugin::setBaseAddress(baseAddress0); | |
|
1112 | 1335 | } |
|
1113 | void PythonQtShell_socexplorerplugin::setInstanceName(const QString& newName) | |
|
1336 | void PythonQtShell_socexplorerplugin::setInstanceName(const QString& newName0) | |
|
1114 | 1337 | { |
|
1115 | if (_wrapper) { | |
|
1116 |
PyObject* |
|
|
1117 | PyErr_Clear(); | |
|
1118 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1338 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1339 | static PyObject* name = PyString_FromString("setInstanceName"); | |
|
1340 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1341 | if (obj) { | |
|
1119 | 1342 | static const char* argumentList[] ={"" , "const QString&"}; |
|
1120 | 1343 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
1121 | void* args[2] = {NULL, (void*)&newName}; | |
|
1344 | void* args[2] = {NULL, (void*)&newName0}; | |
|
1122 | 1345 | PyObject* result = PythonQtSignalTarget::call(obj, methodInfo, args, true); |
|
1123 | 1346 | if (result) { Py_DECREF(result); } |
|
1124 | 1347 | Py_DECREF(obj); |
|
1125 | 1348 | return; |
|
1349 | } else { | |
|
1350 | PyErr_Clear(); | |
|
1126 | 1351 | } |
|
1127 | 1352 | } |
|
1128 | socexplorerplugin::setInstanceName(newName); | |
|
1353 | socexplorerplugin::setInstanceName(newName0); | |
|
1129 | 1354 | } |
|
1130 | 1355 | QPainter* PythonQtShell_socexplorerplugin::sharedPainter() const |
|
1131 | 1356 | { |
|
1132 | if (_wrapper) { | |
|
1133 |
PyObject* |
|
|
1134 | PyErr_Clear(); | |
|
1135 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1357 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1358 | static PyObject* name = PyString_FromString("sharedPainter"); | |
|
1359 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1360 | if (obj) { | |
|
1136 | 1361 | static const char* argumentList[] ={"QPainter*"}; |
|
1137 | 1362 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
1138 | 1363 | QPainter* returnValue; |
@@ -1151,16 +1376,18 if (_wrapper) { | |||
|
1151 | 1376 | if (result) { Py_DECREF(result); } |
|
1152 | 1377 | Py_DECREF(obj); |
|
1153 | 1378 | return returnValue; |
|
1379 | } else { | |
|
1380 | PyErr_Clear(); | |
|
1154 | 1381 | } |
|
1155 | 1382 | } |
|
1156 | 1383 | return socexplorerplugin::sharedPainter(); |
|
1157 | 1384 | } |
|
1158 | 1385 | void PythonQtShell_socexplorerplugin::showEvent(QShowEvent* arg__1) |
|
1159 | 1386 | { |
|
1160 | if (_wrapper) { | |
|
1161 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "showEvent"); | |
|
1162 | PyErr_Clear(); | |
|
1163 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1387 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1388 | static PyObject* name = PyString_FromString("showEvent"); | |
|
1389 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1390 | if (obj) { | |
|
1164 | 1391 | static const char* argumentList[] ={"" , "QShowEvent*"}; |
|
1165 | 1392 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
1166 | 1393 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -1168,16 +1395,18 if (_wrapper) { | |||
|
1168 | 1395 | if (result) { Py_DECREF(result); } |
|
1169 | 1396 | Py_DECREF(obj); |
|
1170 | 1397 | return; |
|
1398 | } else { | |
|
1399 | PyErr_Clear(); | |
|
1171 | 1400 | } |
|
1172 | 1401 | } |
|
1173 | 1402 | socexplorerplugin::showEvent(arg__1); |
|
1174 | 1403 | } |
|
1175 | 1404 | QSize PythonQtShell_socexplorerplugin::sizeHint() const |
|
1176 | 1405 | { |
|
1177 | if (_wrapper) { | |
|
1178 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "getSizeHint"); | |
|
1179 | PyErr_Clear(); | |
|
1180 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1406 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1407 | static PyObject* name = PyString_FromString("getSizeHint"); | |
|
1408 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1409 | if (obj) { | |
|
1181 | 1410 | static const char* argumentList[] ={"QSize"}; |
|
1182 | 1411 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(1, argumentList); |
|
1183 | 1412 | QSize returnValue; |
@@ -1196,16 +1425,18 if (_wrapper) { | |||
|
1196 | 1425 | if (result) { Py_DECREF(result); } |
|
1197 | 1426 | Py_DECREF(obj); |
|
1198 | 1427 | return returnValue; |
|
1428 | } else { | |
|
1429 | PyErr_Clear(); | |
|
1199 | 1430 | } |
|
1200 | 1431 | } |
|
1201 | 1432 | return socexplorerplugin::sizeHint(); |
|
1202 | 1433 | } |
|
1203 | 1434 | void PythonQtShell_socexplorerplugin::tabletEvent(QTabletEvent* arg__1) |
|
1204 | 1435 | { |
|
1205 | if (_wrapper) { | |
|
1206 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "tabletEvent"); | |
|
1207 | PyErr_Clear(); | |
|
1208 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1436 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1437 | static PyObject* name = PyString_FromString("tabletEvent"); | |
|
1438 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1439 | if (obj) { | |
|
1209 | 1440 | static const char* argumentList[] ={"" , "QTabletEvent*"}; |
|
1210 | 1441 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
1211 | 1442 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -1213,16 +1444,18 if (_wrapper) { | |||
|
1213 | 1444 | if (result) { Py_DECREF(result); } |
|
1214 | 1445 | Py_DECREF(obj); |
|
1215 | 1446 | return; |
|
1447 | } else { | |
|
1448 | PyErr_Clear(); | |
|
1216 | 1449 | } |
|
1217 | 1450 | } |
|
1218 | 1451 | socexplorerplugin::tabletEvent(arg__1); |
|
1219 | 1452 | } |
|
1220 | 1453 | void PythonQtShell_socexplorerplugin::timerEvent(QTimerEvent* arg__1) |
|
1221 | 1454 | { |
|
1222 | if (_wrapper) { | |
|
1223 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "timerEvent"); | |
|
1224 | PyErr_Clear(); | |
|
1225 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1455 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1456 | static PyObject* name = PyString_FromString("timerEvent"); | |
|
1457 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1458 | if (obj) { | |
|
1226 | 1459 | static const char* argumentList[] ={"" , "QTimerEvent*"}; |
|
1227 | 1460 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
1228 | 1461 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -1230,16 +1463,18 if (_wrapper) { | |||
|
1230 | 1463 | if (result) { Py_DECREF(result); } |
|
1231 | 1464 | Py_DECREF(obj); |
|
1232 | 1465 | return; |
|
1466 | } else { | |
|
1467 | PyErr_Clear(); | |
|
1233 | 1468 | } |
|
1234 | 1469 | } |
|
1235 | 1470 | socexplorerplugin::timerEvent(arg__1); |
|
1236 | 1471 | } |
|
1237 | 1472 | void PythonQtShell_socexplorerplugin::wheelEvent(QWheelEvent* arg__1) |
|
1238 | 1473 | { |
|
1239 | if (_wrapper) { | |
|
1240 | PyObject* obj = PyObject_GetAttrString((PyObject*)_wrapper, "wheelEvent"); | |
|
1241 | PyErr_Clear(); | |
|
1242 | if (obj && !PythonQtSlotFunction_Check(obj)) { | |
|
1474 | if (_wrapper && (((PyObject*)_wrapper)->ob_refcnt > 0)) { | |
|
1475 | static PyObject* name = PyString_FromString("wheelEvent"); | |
|
1476 | PyObject* obj = PyBaseObject_Type.tp_getattro((PyObject*)_wrapper, name); | |
|
1477 | if (obj) { | |
|
1243 | 1478 | static const char* argumentList[] ={"" , "QWheelEvent*"}; |
|
1244 | 1479 | static const PythonQtMethodInfo* methodInfo = PythonQtMethodInfo::getCachedMethodInfoFromArgumentList(2, argumentList); |
|
1245 | 1480 | void* args[2] = {NULL, (void*)&arg__1}; |
@@ -1247,6 +1482,8 if (_wrapper) { | |||
|
1247 | 1482 | if (result) { Py_DECREF(result); } |
|
1248 | 1483 | Py_DECREF(obj); |
|
1249 | 1484 | return; |
|
1485 | } else { | |
|
1486 | PyErr_Clear(); | |
|
1250 | 1487 | } |
|
1251 | 1488 | } |
|
1252 | 1489 | socexplorerplugin::wheelEvent(arg__1); |
@@ -1295,6 +1532,16 void PythonQtWrapper_socexplorerplugin:: | |||
|
1295 | 1532 | ( ((PythonQtPublicPromoter_socexplorerplugin*)theWrappedObject)->promoted_closeMe()); |
|
1296 | 1533 | } |
|
1297 | 1534 | |
|
1535 | bool PythonQtWrapper_socexplorerplugin::dumpMemory(socexplorerplugin* theWrappedObject, unsigned int address, unsigned int count, QString file) | |
|
1536 | { | |
|
1537 | return ( ((PythonQtPublicPromoter_socexplorerplugin*)theWrappedObject)->promoted_dumpMemory(address, count, file)); | |
|
1538 | } | |
|
1539 | ||
|
1540 | bool PythonQtWrapper_socexplorerplugin::dumpMemory(socexplorerplugin* theWrappedObject, unsigned int address, unsigned int count, QString file, const QString& format) | |
|
1541 | { | |
|
1542 | return ( ((PythonQtPublicPromoter_socexplorerplugin*)theWrappedObject)->promoted_dumpMemory(address, count, file, format)); | |
|
1543 | } | |
|
1544 | ||
|
1298 | 1545 | QString PythonQtWrapper_socexplorerplugin::instanceName(socexplorerplugin* theWrappedObject) |
|
1299 | 1546 | { |
|
1300 | 1547 | return ( theWrappedObject->instanceName()); |
@@ -1305,6 +1552,21 int PythonQtWrapper_socexplorerplugin:: | |||
|
1305 | 1552 | return ( ((PythonQtPublicPromoter_socexplorerplugin*)theWrappedObject)->promoted_isConnected()); |
|
1306 | 1553 | } |
|
1307 | 1554 | |
|
1555 | bool PythonQtWrapper_socexplorerplugin::loadbin(socexplorerplugin* theWrappedObject, unsigned int address, QString file) | |
|
1556 | { | |
|
1557 | return ( ((PythonQtPublicPromoter_socexplorerplugin*)theWrappedObject)->promoted_loadbin(address, file)); | |
|
1558 | } | |
|
1559 | ||
|
1560 | void PythonQtWrapper_socexplorerplugin::makeGenericPyWrapper(socexplorerplugin* theWrappedObject) | |
|
1561 | { | |
|
1562 | ( ((PythonQtPublicPromoter_socexplorerplugin*)theWrappedObject)->promoted_makeGenericPyWrapper()); | |
|
1563 | } | |
|
1564 | ||
|
1565 | bool PythonQtWrapper_socexplorerplugin::memSet(socexplorerplugin* theWrappedObject, unsigned int address, int value, unsigned int count) | |
|
1566 | { | |
|
1567 | return ( ((PythonQtPublicPromoter_socexplorerplugin*)theWrappedObject)->promoted_memSet(address, value, count)); | |
|
1568 | } | |
|
1569 | ||
|
1308 | 1570 | void PythonQtWrapper_socexplorerplugin::postInstantiationTrigger(socexplorerplugin* theWrappedObject) |
|
1309 | 1571 | { |
|
1310 | 1572 | ( ((PythonQtPublicPromoter_socexplorerplugin*)theWrappedObject)->promoted_postInstantiationTrigger()); |
@@ -1,8 +1,8 | |||
|
1 | 1 | #include <PythonQt.h> |
|
2 | #include <QIconEngine> | |
|
3 | 2 | #include <QObject> |
|
4 | 3 | #include <QVariant> |
|
5 | 4 | #include <qaction.h> |
|
5 | #include <qbackingstore.h> | |
|
6 | 6 | #include <qbitmap.h> |
|
7 | 7 | #include <qbytearray.h> |
|
8 | 8 | #include <qcoreevent.h> |
@@ -12,12 +12,14 | |||
|
12 | 12 | #include <qfont.h> |
|
13 | 13 | #include <qgraphicseffect.h> |
|
14 | 14 | #include <qgraphicsproxywidget.h> |
|
15 | #include <qicon.h> | |
|
15 | 16 | #include <qkeysequence.h> |
|
16 | 17 | #include <qlayout.h> |
|
17 | 18 | #include <qlist.h> |
|
18 | 19 | #include <qlocale.h> |
|
19 | 20 | #include <qmargins.h> |
|
20 | 21 | #include <qmenu.h> |
|
22 | #include <qmetaobject.h> | |
|
21 | 23 | #include <qobject.h> |
|
22 | 24 | #include <qpaintdevice.h> |
|
23 | 25 | #include <qpaintengine.h> |
@@ -32,6 +34,7 | |||
|
32 | 34 | #include <qstyle.h> |
|
33 | 35 | #include <qstyleoption.h> |
|
34 | 36 | #include <qwidget.h> |
|
37 | #include <qwindow.h> | |
|
35 | 38 | #include <socexplorerplugin.h> |
|
36 | 39 | |
|
37 | 40 | |
@@ -62,6 +65,8 virtual void dragEnterEvent(QDragEnterEv | |||
|
62 | 65 | virtual void dragLeaveEvent(QDragLeaveEvent* arg__1); |
|
63 | 66 | virtual void dragMoveEvent(QDragMoveEvent* arg__1); |
|
64 | 67 | virtual void dropEvent(QDropEvent* arg__1); |
|
68 | virtual bool dumpMemory(unsigned int address, unsigned int count, QString file); | |
|
69 | virtual bool dumpMemory(unsigned int address, unsigned int count, QString file, const QString& format); | |
|
65 | 70 | virtual void enterEvent(QEvent* arg__1); |
|
66 | 71 | virtual bool event(QEvent* event); |
|
67 | 72 | virtual bool eventFilter(QObject* arg__1, QEvent* arg__2); |
@@ -78,6 +83,8 virtual int isConnected(); | |||
|
78 | 83 | virtual void keyPressEvent(QKeyEvent* arg__1); |
|
79 | 84 | virtual void keyReleaseEvent(QKeyEvent* arg__1); |
|
80 | 85 | virtual void leaveEvent(QEvent* arg__1); |
|
86 | virtual bool loadbin(unsigned int address, QString file); | |
|
87 | virtual bool memSet(unsigned int address, int value, unsigned int count); | |
|
81 | 88 | virtual int metric(QPaintDevice::PaintDeviceMetric arg__1) const; |
|
82 | 89 | virtual QSize minimumSizeHint() const; |
|
83 | 90 | virtual void mouseDoubleClickEvent(QMouseEvent* arg__1); |
@@ -114,7 +121,12 inline void promoted_activate(bool flag | |||
|
114 | 121 | inline int promoted_baseAddress() { return socexplorerplugin::baseAddress(); } |
|
115 | 122 | inline QString promoted_baseName() { return socexplorerplugin::baseName(); } |
|
116 | 123 | inline void promoted_closeMe() { socexplorerplugin::closeMe(); } |
|
124 | inline bool promoted_dumpMemory(unsigned int address, unsigned int count, QString file) { return socexplorerplugin::dumpMemory(address, count, file); } | |
|
125 | inline bool promoted_dumpMemory(unsigned int address, unsigned int count, QString file, const QString& format) { return socexplorerplugin::dumpMemory(address, count, file, format); } | |
|
117 | 126 | inline int promoted_isConnected() { return socexplorerplugin::isConnected(); } |
|
127 | inline bool promoted_loadbin(unsigned int address, QString file) { return socexplorerplugin::loadbin(address, file); } | |
|
128 | inline void promoted_makeGenericPyWrapper() { socexplorerplugin::makeGenericPyWrapper(); } | |
|
129 | inline bool promoted_memSet(unsigned int address, int value, unsigned int count) { return socexplorerplugin::memSet(address, value, count); } | |
|
118 | 130 | inline void promoted_postInstantiationTrigger() { socexplorerplugin::postInstantiationTrigger(); } |
|
119 | 131 | inline int promoted_registermenu(QMenu* menu) { return socexplorerplugin::registermenu(menu); } |
|
120 | 132 | inline void promoted_setBaseAddress(unsigned int baseAddress) { socexplorerplugin::setBaseAddress(baseAddress); } |
@@ -135,22 +147,27 void delete_socexplorerplugin(socexplore | |||
|
135 | 147 | int baseAddress(socexplorerplugin* theWrappedObject); |
|
136 | 148 | QString baseName(socexplorerplugin* theWrappedObject); |
|
137 | 149 | void closeMe(socexplorerplugin* theWrappedObject); |
|
150 | bool dumpMemory(socexplorerplugin* theWrappedObject, unsigned int address, unsigned int count, QString file); | |
|
151 | bool dumpMemory(socexplorerplugin* theWrappedObject, unsigned int address, unsigned int count, QString file, const QString& format); | |
|
138 | 152 | QString instanceName(socexplorerplugin* theWrappedObject); |
|
139 | 153 | int isConnected(socexplorerplugin* theWrappedObject); |
|
154 | bool loadbin(socexplorerplugin* theWrappedObject, unsigned int address, QString file); | |
|
155 | void makeGenericPyWrapper(socexplorerplugin* theWrappedObject); | |
|
156 | bool memSet(socexplorerplugin* theWrappedObject, unsigned int address, int value, unsigned int count); | |
|
140 | 157 | void postInstantiationTrigger(socexplorerplugin* theWrappedObject); |
|
141 | 158 | int registermenu(socexplorerplugin* theWrappedObject, QMenu* menu); |
|
142 | 159 | void setBaseAddress(socexplorerplugin* theWrappedObject, unsigned int baseAddress); |
|
143 | 160 | void setInstanceName(socexplorerplugin* theWrappedObject, const QString& newName); |
|
144 |
void py_set_ |
|
|
145 |
|
|
|
161 | void py_set_ChildsMenu(socexplorerplugin* theWrappedObject, QMenu* ChildsMenu){ theWrappedObject->ChildsMenu = ChildsMenu; } | |
|
162 | QMenu* py_get_ChildsMenu(socexplorerplugin* theWrappedObject){ return theWrappedObject->ChildsMenu; } | |
|
163 | void py_set_childs(socexplorerplugin* theWrappedObject, QList<socexplorerplugin* > childs){ theWrappedObject->childs = childs; } | |
|
164 | QList<socexplorerplugin* > py_get_childs(socexplorerplugin* theWrappedObject){ return theWrappedObject->childs; } | |
|
165 | void py_set_closeAction(socexplorerplugin* theWrappedObject, QAction* closeAction){ theWrappedObject->closeAction = closeAction; } | |
|
166 | QAction* py_get_closeAction(socexplorerplugin* theWrappedObject){ return theWrappedObject->closeAction; } | |
|
146 | 167 | void py_set_menu(socexplorerplugin* theWrappedObject, QMenu* menu){ theWrappedObject->menu = menu; } |
|
147 | 168 | QMenu* py_get_menu(socexplorerplugin* theWrappedObject){ return theWrappedObject->menu; } |
|
148 |
void py_set_ |
|
|
149 |
|
|
|
150 | void py_set_closeAction(socexplorerplugin* theWrappedObject, QAction* closeAction){ theWrappedObject->closeAction = closeAction; } | |
|
151 | QAction* py_get_closeAction(socexplorerplugin* theWrappedObject){ return theWrappedObject->closeAction; } | |
|
152 | void py_set_childs(socexplorerplugin* theWrappedObject, QList<socexplorerplugin* > childs){ theWrappedObject->childs = childs; } | |
|
153 | QList<socexplorerplugin* > py_get_childs(socexplorerplugin* theWrappedObject){ return theWrappedObject->childs; } | |
|
169 | void py_set_parent(socexplorerplugin* theWrappedObject, socexplorerplugin* parent){ theWrappedObject->parent = parent; } | |
|
170 | socexplorerplugin* py_get_parent(socexplorerplugin* theWrappedObject){ return theWrappedObject->parent; } | |
|
154 | 171 | }; |
|
155 | 172 | |
|
156 | 173 |
@@ -1,8 +1,11 | |||
|
1 | 1 | #include <PythonQt.h> |
|
2 | #include <PythonQtConversion.h> | |
|
2 | 3 | #include "PySocExplorerEngine0.h" |
|
3 | 4 | |
|
4 | 5 | |
|
6 | ||
|
5 | 7 | void PythonQt_init_PySocExplorerEngine(PyObject* module) { |
|
6 | 8 | PythonQt::priv()->registerClass(&socexplorerplugin::staticMetaObject, "PySocExplorerEngine", PythonQtCreateObject<PythonQtWrapper_socexplorerplugin>, PythonQtSetInstanceWrapperOnShell<PythonQtShell_socexplorerplugin>, module, 0); |
|
7 | 9 | |
|
10 | ||
|
8 | 11 | } |
@@ -37,9 +37,10 int main(int argc, char *argv[]) | |||
|
37 | 37 | QApplication a(argc, argv); |
|
38 | 38 | QString scriptToEval; |
|
39 | 39 | QStringList args= a.arguments(); |
|
40 | for(int i=0;i<args.count()-1;i++) | |
|
40 | bool noGUI=false; | |
|
41 | for(int i=0;i<=args.count()-1;i++) | |
|
41 | 42 | { |
|
42 | if((args.at(i).compare("-e")==0) || (args.at(i).compare("--execute")==0)) | |
|
43 | if(((args.at(i).compare("-e")==0) || (args.at(i).compare("--execute")==0)) && (i<(args.count()-1))) | |
|
43 | 44 | { |
|
44 | 45 | scriptToEval = args.at(i+1); |
|
45 | 46 | if(!QFile::exists(scriptToEval)) |
@@ -50,7 +51,7 int main(int argc, char *argv[]) | |||
|
50 | 51 | qDebug() << "Will execute" << scriptToEval; |
|
51 | 52 | break; |
|
52 | 53 | } |
|
53 | if((args.at(i).compare("-d")==0) || (args.at(i).compare("--debug-level")==0)) | |
|
54 | if(((args.at(i).compare("-d")==0) || (args.at(i).compare("--debug-level")==0)) && (i<(args.count()-1))) | |
|
54 | 55 | { |
|
55 | 56 | bool success; |
|
56 | 57 | int lvl; |
@@ -60,10 +61,23 int main(int argc, char *argv[]) | |||
|
60 | 61 | SocExplorerEngine::setLogLevel(lvl); |
|
61 | 62 | } |
|
62 | 63 | } |
|
64 | if((args.at(i).compare("--no-gui")==0)) | |
|
65 | { | |
|
66 | noGUI = true; | |
|
67 | qDebug() << "CLI mode"; | |
|
68 | } | |
|
63 | 69 | } |
|
64 | 70 | |
|
65 | 71 | SocExplorerMainWindow w(scriptToEval); |
|
72 | if(!noGUI) | |
|
73 | { | |
|
74 | ||
|
66 | 75 | w.show(); |
|
76 | } | |
|
77 | else | |
|
78 | { | |
|
79 | ||
|
80 | } | |
|
67 | 81 | return a.exec(); |
|
68 | 82 | } |
|
69 | 83 |
@@ -35,7 +35,8 INCLUDEPATH+=$${PWD} \ | |||
|
35 | 35 | SocExplorerEngine/RegisterMVS \ |
|
36 | 36 | SocExplorerEngine/XmlEngine \ |
|
37 | 37 | SocExplorerEngine/SOC \ |
|
38 | SocExplorerEngine/PeripheralWidget/src | |
|
38 | SocExplorerEngine/PeripheralWidget/src \ | |
|
39 | SocExplorerEngine/memtester | |
|
39 | 40 | |
|
40 | 41 | win32:INCLUDEPATH+= \ |
|
41 | 42 | $${PWD}/common/genericBinaryFiles/elf/libelfWin32/include \ |
General Comments 0
You need to be logged in to leave comments.
Login now