HG_REPOSITORIES/LPP/INSTRUMENTATION/SOLO_LFR/DEV_PLE Commit - r240:8d5977010643

minor updates on documentation

paul -

r240:8d5977010643 R3

parent child

Context file:

r240:8d5977010643

Collapse all files

.hgsubstate +1 -1

@@ -1,2 +1,2
1	3081d1f9bb20b2b64a192585337a292a9804e0c5 LFR_basic-parameters	1	3081d1f9bb20b2b64a192585337a292a9804e0c5 LFR_basic-parameters
2	721463c11a484e6a3439e16c99f8bd27720b9265 header/lfr_common_headers	2	ff85ce82cd9845f180cb578272717bcb76b62cb5 header/lfr_common_headers

header/fsw_misc.h +1 0

             #ifndef FSW_MISC_H_INCLUDED
             #define FSW_MISC_H_INCLUDED
             #include <rtems.h>
             #include <stdio.h>
             #include <grspw.h>
             #include <grlib_regs.h>
             #include "fsw_params.h"
             #include "fsw_spacewire.h"
             #include "lfr_cpu_usage_report.h"
             enum lfr_reset_cause_t{
                 UNKNOWN_CAUSE,
                 POWER_ON,
                 TC_RESET,
                 WATCHDOG,
                 ERROR_RESET,
                 UNEXP_RESET
             };
             extern gptimer_regs_t *gptimer_regs;
             #define LFR_RESET_CAUSE_UNKNOWN_CAUSE 0
             rtems_name name_hk_rate_monotonic;  // name of the HK rate monotonic
             rtems_id HK_id;                     // id of the HK rate monotonic period
             void timer_configure( unsigned char timer, unsigned int clock_divider,
                                 unsigned char interrupt_level, rtems_isr (*timer_isr)() );
             void timer_start( unsigned char timer );
             void timer_stop( unsigned char timer );
             void timer_set_clock_divider(unsigned char timer, unsigned int clock_divider);
             // WATCHDOG
             rtems_isr watchdog_isr( rtems_vector_number vector );
             void watchdog_configure(void);
             void watchdog_stop(void);
             void watchdog_start(void);
             // SERIAL LINK
             int send_console_outputs_on_apbuart_port( void );
             int enable_apbuart_transmitter( void );
             void set_apbuart_scaler_reload_register(unsigned int regs, unsigned int value);
             // RTEMS TASKS
             rtems_task load_task( rtems_task_argument argument );
             rtems_task hous_task( rtems_task_argument argument );
             rtems_task dumb_task( rtems_task_argument unused );
             void init_housekeeping_parameters( void );
             void increment_seq_counter(unsigned short *packetSequenceControl);
             void getTime( unsigned char *time);
             unsigned long long int getTimeAsUnsignedLongLongInt( );
             void send_dumb_hk( void );
             void get_temperatures( unsigned char *temperatures );
             void get_v_e1_e2_f3( unsigned char *spacecraft_potential );
             void get_cpu_load( unsigned char *resource_statistics );
             void set_hk_lfr_sc_potential_flag( bool state );
             void set_hk_lfr_mag_fields_flag( bool state );
             void set_hk_lfr_calib_enable( bool state );
             void set_hk_lfr_reset_cause( enum lfr_reset_cause_t lfr_reset_cause );
+            void hk_lfr_le_me_he_update();
             extern int sched_yield( void );
             extern void rtems_cpu_usage_reset();
             extern ring_node *current_ring_node_f3;
             extern ring_node *ring_node_to_send_cwf_f3;
             extern ring_node waveform_ring_f3[];
             extern unsigned short sequenceCounterHK;
             extern unsigned char hk_lfr_q_sd_fifo_size_max;
             extern unsigned char hk_lfr_q_rv_fifo_size_max;
             extern unsigned char hk_lfr_q_p0_fifo_size_max;
             extern unsigned char hk_lfr_q_p1_fifo_size_max;
             extern unsigned char hk_lfr_q_p2_fifo_size_max;
             #endif // FSW_MISC_H_INCLUDED

header/fsw_spacewire.h 0 -1

             #ifndef FSW_SPACEWIRE_H_INCLUDED
             #define FSW_SPACEWIRE_H_INCLUDED
             #include <rtems.h>
             #include <grspw.h>
             #include <fcntl.h>      // for  O_RDWR
             #include <unistd.h>     // for the read call
             #include <sys/ioctl.h>  // for the ioctl call
             #include <errno.h>
             #include "fsw_params.h"
             #include "tc_handler.h"
             #include "fsw_init.h"
             extern spw_stats spacewire_stats;
             extern spw_stats spacewire_stats_backup;
             // RTEMS TASK
             rtems_task spiq_task( rtems_task_argument argument );
             rtems_task recv_task( rtems_task_argument unused );
             rtems_task send_task( rtems_task_argument argument );
             rtems_task wtdg_task( rtems_task_argument argument );
             int spacewire_open_link( void );
             int spacewire_start_link( int fd );
             int spacewire_stop_and_start_link( int fd );
             int spacewire_configure_link(int fd );
             int spacewire_reset_link( void );
             void spacewire_set_NP( unsigned char val, unsigned int regAddr ); // No Port force
             void spacewire_set_RE( unsigned char val, unsigned int regAddr ); // RMAP Enable
             void spacewire_compute_stats_offsets( void );
             void spacewire_update_statistics( void );
             void init_header_cwf( Header_TM_LFR_SCIENCE_CWF_t *header );
             void init_header_swf( Header_TM_LFR_SCIENCE_SWF_t *header );
             void init_header_asm( Header_TM_LFR_SCIENCE_ASM_t *header );
             int spw_send_waveform_CWF( ring_node *ring_node_to_send, Header_TM_LFR_SCIENCE_CWF_t *header );
             int spw_send_waveform_SWF( ring_node *ring_node_to_send, Header_TM_LFR_SCIENCE_SWF_t *header );
             int spw_send_waveform_CWF3_light( ring_node *ring_node_to_send, Header_TM_LFR_SCIENCE_CWF_t *header );
             void spw_send_asm_f0( ring_node *ring_node_to_send, Header_TM_LFR_SCIENCE_ASM_t *header );
             void spw_send_asm_f1( ring_node *ring_node_to_send, Header_TM_LFR_SCIENCE_ASM_t *header );
             void spw_send_asm_f2( ring_node *ring_node_to_send, Header_TM_LFR_SCIENCE_ASM_t *header );
             void spw_send_k_dump( ring_node *ring_node_to_send );
             void timecode_irq_handler( void *pDev, void *regs, int minor, unsigned int tc );
-            rtems_timer_service_routine user_routine( rtems_id timer_id, void *user_data );
             void (*grspw_timecode_callback) ( void *pDev, void *regs, int minor, unsigned int tc );
             #endif // FSW_SPACEWIRE_H_INCLUDED

header/tc_handler.h +3 0

             #ifndef TC_HANDLER_H_INCLUDED
             #define TC_HANDLER_H_INCLUDED
             #include <rtems.h>
             #include <leon.h>
             #include "tc_load_dump_parameters.h"
             #include "tc_acceptance.h"
             #include "tm_lfr_tc_exe.h"
             #include "wf_handler.h"
             #include "fsw_processing.h"
             #include "lfr_cpu_usage_report.h"
+            extern unsigned int lastValidTransitionDate;
             //****
             // ISR
             rtems_isr commutation_isr1( rtems_vector_number vector );
             rtems_isr commutation_isr2( rtems_vector_number vector );
             //***********
             // RTEMS TASK
             rtems_task actn_task( rtems_task_argument unused );
             //***********
             // TC ACTIONS
             int action_reset( ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time );
             int action_enter_mode(ccsdsTelecommandPacket_t *TC, rtems_id queue_id);
             int action_update_info( ccsdsTelecommandPacket_t *TC, rtems_id queue_id );
             int action_enable_calibration( ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time );
             int action_disable_calibration( ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time );
             int action_update_time( ccsdsTelecommandPacket_t *TC);
             // mode transition
             int check_mode_value( unsigned char requestedMode );
             int check_mode_transition( unsigned char requestedMode );
+            void update_last_valid_transition_date( unsigned int transitionCoarseTime );
             int check_transition_date( unsigned int transitionCoarseTime );
             int stop_spectral_matrices( void );
             int stop_current_mode( void );
             int enter_mode_standby( void );
             int enter_mode_normal( unsigned int transitionCoarseTime );
             int enter_mode_burst( unsigned int transitionCoarseTime );
             int enter_mode_sbm1( unsigned int transitionCoarseTime );
             int enter_mode_sbm2( unsigned int transitionCoarseTime );
             int restart_science_tasks( unsigned char lfrRequestedMode );
             int restart_asm_tasks(unsigned char lfrRequestedMode );
             int suspend_science_tasks(void);
             int suspend_asm_tasks( void );
             void launch_waveform_picker( unsigned char mode , unsigned int transitionCoarseTime );
             void launch_spectral_matrix( void );
             void set_sm_irq_onNewMatrix( unsigned char value );
             void set_sm_irq_onError( unsigned char value );
             // other functions
             void updateLFRCurrentMode();
             void set_lfr_soft_reset( unsigned char value );
             void reset_lfr( void );
             // CALIBRATION
             void setCalibrationPrescaler( unsigned int prescaler );
             void setCalibrationDivisor( unsigned int divisionFactor );
             void setCalibrationData( void );
             void setCalibrationReload( bool state);
             void setCalibrationEnable( bool state );
             void setCalibrationInterleaved( bool state );
             void setCalibration( bool state );
             void configureCalibration( bool interleaved );
             //
             void update_last_TC_exe( ccsdsTelecommandPacket_t *TC , unsigned char *time );
             void update_last_TC_rej(ccsdsTelecommandPacket_t *TC , unsigned char *time );
             void close_action( ccsdsTelecommandPacket_t *TC, int result, rtems_id queue_id );
             extern rtems_status_code get_message_queue_id_send( rtems_id *queue_id );
             extern rtems_status_code get_message_queue_id_recv( rtems_id *queue_id );
             #endif // TC_HANDLER_H_INCLUDED

src/fsw_globals.c +1 0

             /** Global variables of the LFR flight software.
              *
              * @file
              * @author P. LEROY
              *
              * Among global variables, there are:
              * - RTEMS names and id.
              * - APB configuration registers.
              * - waveforms global buffers, used by the waveform picker hardware module to store data.
              * - spectral  matrices buffesr, used by the hardware module to store data.
              * - variable related to LFR modes parameters.
              * - the global HK packet buffer.
              * - the global dump parameter buffer.
              *
              */
             #include <rtems.h>
             #include <grspw.h>
             #include "ccsds_types.h"
             #include "grlib_regs.h"
             #include "fsw_params.h"
             #include "fsw_params_wf_handler.h"
             // RTEMS GLOBAL VARIABLES
             rtems_name  misc_name[5];
             rtems_name  Task_name[20];       /* array of task names */
             rtems_id    Task_id[20];         /* array of task ids */
             int fdSPW = 0;
             int fdUART = 0;
             unsigned char lfrCurrentMode;
             unsigned char pa_bia_status_info;
             // WAVEFORMS GLOBAL VARIABLES   // 2048 * 3 * 4 + 2 * 4 = 24576 + 8 bytes = 24584
                                             //  97 * 256 = 24832 => delta = 248 bytes = 62 words
             // WAVEFORMS GLOBAL VARIABLES   // 2688 * 3 * 4 + 2 * 4 = 32256 + 8 bytes = 32264
                                             // 127 * 256 = 32512 => delta = 248 bytes = 62 words
             // F0 F1 F2 F3
             volatile int wf_buffer_f0[ NB_RING_NODES_F0 * WFRM_BUFFER ] __attribute__((aligned(0x100)));
             volatile int wf_buffer_f1[ NB_RING_NODES_F1 * WFRM_BUFFER ] __attribute__((aligned(0x100)));
             volatile int wf_buffer_f2[ NB_RING_NODES_F2 * WFRM_BUFFER ] __attribute__((aligned(0x100)));
             volatile int wf_buffer_f3[ NB_RING_NODES_F3 * WFRM_BUFFER ] __attribute__((aligned(0x100)));
             //***********************************
             // SPECTRAL MATRICES GLOBAL VARIABLES
             // alignment constraints for the spectral matrices buffers => the first data after the time (8 bytes) shall be aligned on 0x00
             volatile int sm_f0[ NB_RING_NODES_SM_F0 * TOTAL_SIZE_SM ] __attribute__((aligned(0x100)));
             volatile int sm_f1[ NB_RING_NODES_SM_F1 * TOTAL_SIZE_SM ] __attribute__((aligned(0x100)));
             volatile int sm_f2[ NB_RING_NODES_SM_F2 * TOTAL_SIZE_SM ] __attribute__((aligned(0x100)));
             // APB CONFIGURATION REGISTERS
             time_management_regs_t          *time_management_regs   = (time_management_regs_t*)         REGS_ADDR_TIME_MANAGEMENT;
             gptimer_regs_t                  *gptimer_regs           = (gptimer_regs_t *)                REGS_ADDR_GPTIMER;
             waveform_picker_regs_0_1_18_t   *waveform_picker_regs   = (waveform_picker_regs_0_1_18_t*)  REGS_ADDR_WAVEFORM_PICKER;
             spectral_matrix_regs_t          *spectral_matrix_regs   = (spectral_matrix_regs_t*)         REGS_ADDR_SPECTRAL_MATRIX;
             // MODE PARAMETERS
             Packet_TM_LFR_PARAMETER_DUMP_t parameter_dump_packet;
             struct param_local_str param_local;
+            unsigned int lastValidTransitionDate;
             // HK PACKETS
             Packet_TM_LFR_HK_t housekeeping_packet;
             // message queues occupancy
             unsigned char hk_lfr_q_sd_fifo_size_max;
             unsigned char hk_lfr_q_rv_fifo_size_max;
             unsigned char hk_lfr_q_p0_fifo_size_max;
             unsigned char hk_lfr_q_p1_fifo_size_max;
             unsigned char hk_lfr_q_p2_fifo_size_max;
             // sequence counters are incremented by APID (PID + CAT) and destination ID
             unsigned short sequenceCounters_SCIENCE_NORMAL_BURST;
             unsigned short sequenceCounters_SCIENCE_SBM1_SBM2;
             unsigned short sequenceCounters_TC_EXE[SEQ_CNT_NB_DEST_ID];
             unsigned short sequenceCounters_TM_DUMP[SEQ_CNT_NB_DEST_ID];
             unsigned short sequenceCounterHK;
             spw_stats spacewire_stats;
             spw_stats spacewire_stats_backup;

src/fsw_init.c +1 0

             /** This is the RTEMS initialization module.
              *
              * @file
              * @author P. LEROY
              *
              * This module contains two very different information:
              * - specific instructions to configure the compilation of the RTEMS executive
              * - functions related to the fligth softwre initialization, especially the INIT RTEMS task
              *
              */
             //*************************
             // GPL reminder to be added
             //*************************
             #include <rtems.h>
             /* configuration information */
             #define CONFIGURE_INIT
             #include <bsp.h> /* for device driver prototypes */
             /* configuration information */
             #define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
             #define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
             #define CONFIGURE_MAXIMUM_TASKS 20
             #define CONFIGURE_RTEMS_INIT_TASKS_TABLE
             #define CONFIGURE_EXTRA_TASK_STACKS (3 * RTEMS_MINIMUM_STACK_SIZE)
             #define CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS 32
             #define CONFIGURE_INIT_TASK_PRIORITY 1 // instead of 100
             #define CONFIGURE_INIT_TASK_MODE (RTEMS_DEFAULT_MODES | RTEMS_NO_PREEMPT)
             #define CONFIGURE_INIT_TASK_ATTRIBUTES (RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT)
             #define CONFIGURE_MAXIMUM_DRIVERS 16
             #define CONFIGURE_MAXIMUM_PERIODS 5
             #define CONFIGURE_MAXIMUM_TIMERS 5  // STAT (1s), send SWF (0.3s), send CWF3 (1s)
             #define CONFIGURE_MAXIMUM_MESSAGE_QUEUES 5
             #ifdef PRINT_STACK_REPORT
                 #define CONFIGURE_STACK_CHECKER_ENABLED
             #endif
             #include <rtems/confdefs.h>
             /* If --drvmgr was enabled during the configuration of the RTEMS kernel */
             #ifdef RTEMS_DRVMGR_STARTUP
                 #ifdef LEON3
                 /* Add Timer and UART Driver */
                     #ifdef CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
                         #define CONFIGURE_DRIVER_AMBAPP_GAISLER_GPTIMER
                     #endif
                     #ifdef CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
                         #define CONFIGURE_DRIVER_AMBAPP_GAISLER_APBUART
                     #endif
                 #endif
                 #define CONFIGURE_DRIVER_AMBAPP_GAISLER_GRSPW   /* GRSPW Driver */
                 #include <drvmgr/drvmgr_confdefs.h>
             #endif
             #include "fsw_init.h"
             #include "fsw_config.c"
             #include "GscMemoryLPP.hpp"
             void initCache()
             {
                 unsigned int cacheControlRegister;
                 cacheControlRegister = getCacheControlRegister();
                 PRINTF1("(0) cacheControlRegister = %x\n", cacheControlRegister)
                 resetCacheControlRegister();
                 enableInstructionCache();
                 enableDataCache();
                 enableInstructionBurstFetch();
                 cacheControlRegister = getCacheControlRegister();
                 PRINTF1("(1) cacheControlRegister = %x\n", cacheControlRegister)
             }
             rtems_task Init( rtems_task_argument ignored )
             {
                 /** This is the RTEMS INIT taks, it is the first task launched by the system.
                  *
                  * @param unused is the starting argument of the RTEMS task
                  *
                  * The INIT task create and run all other RTEMS tasks.
                  *
                  */
                 //***********
                 // INIT CACHE
                 unsigned char *vhdlVersion;
                 reset_lfr();
                 reset_local_time();
                 rtems_cpu_usage_reset();
                 rtems_status_code status;
                 rtems_status_code status_spw;
                 rtems_isr_entry  old_isr_handler;
                 // UART settings
                 send_console_outputs_on_apbuart_port();
                 set_apbuart_scaler_reload_register(REGS_ADDR_APBUART, APBUART_SCALER_RELOAD_VALUE);
                 enable_apbuart_transmitter();
                 DEBUG_PRINTF("\n\n\n\n\nIn INIT *** Now the console is on port COM1\n")
                 PRINTF("\n\n\n\n\n")
                 initCache();
                 PRINTF("*************************\n")
                 PRINTF("** LFR Flight Software **\n")
                 PRINTF1("** %d.", SW_VERSION_N1)
                 PRINTF1("%d."   , SW_VERSION_N2)
                 PRINTF1("%d."   , SW_VERSION_N3)
                 PRINTF1("%d            **\n", SW_VERSION_N4)
                 vhdlVersion = (unsigned char *) (REGS_ADDR_VHDL_VERSION);
                 PRINTF("** VHDL                **\n")
                 PRINTF1("** %d.", vhdlVersion[1])
                 PRINTF1("%d."   , vhdlVersion[2])
                 PRINTF1("%d              **\n", vhdlVersion[3])
                 PRINTF("*************************\n")
                 PRINTF("\n\n")
                 init_parameter_dump();
                 init_kcoefficients_dump();
                 init_local_mode_parameters();
                 init_housekeeping_parameters();
                 init_k_coefficients_prc0();
                 init_k_coefficients_prc1();
                 init_k_coefficients_prc2();
                 pa_bia_status_info = 0x00;
+                update_last_valid_transition_date( DEFAULT_LAST_VALID_TRANSITION_DATE  );
                 // waveform picker initialization
                 WFP_init_rings();  LEON_Clear_interrupt( IRQ_SPARC_GPTIMER_WATCHDOG );    // initialize the waveform rings
                 WFP_reset_current_ring_nodes();
                 reset_waveform_picker_regs();
                 // spectral matrices initialization
                 SM_init_rings();            // initialize spectral matrices rings
                 SM_reset_current_ring_nodes();
                 reset_spectral_matrix_regs();
                 // configure calibration
                 configureCalibration( false );   // true means interleaved mode, false is for normal mode
                 updateLFRCurrentMode();
                 BOOT_PRINTF1("in INIT *** lfrCurrentMode is %d\n", lfrCurrentMode)
                 create_names();                             // create all names
                 status = create_message_queues();           // create message queues
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in INIT *** ERR in create_message_queues, code %d", status)
                 }
                 status = create_all_tasks();                // create all tasks
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in INIT *** ERR in create_all_tasks, code %d\n", status)
                 }
                 // **************************
                 // <SPACEWIRE INITIALIZATION>
                 grspw_timecode_callback = &timecode_irq_handler;
                 status_spw = spacewire_open_link();     // (1) open the link
                 if ( status_spw != RTEMS_SUCCESSFUL )
                 {
                     PRINTF1("in INIT *** ERR spacewire_open_link code %d\n", status_spw )
                 }
                 if ( status_spw == RTEMS_SUCCESSFUL )   // (2) configure the link
                 {
                     status_spw = spacewire_configure_link( fdSPW );
                     if ( status_spw != RTEMS_SUCCESSFUL )
                     {
                         PRINTF1("in INIT *** ERR spacewire_configure_link code %d\n", status_spw )
                     }
                 }
                 if ( status_spw == RTEMS_SUCCESSFUL)    // (3) start the link
                 {
                     status_spw = spacewire_start_link( fdSPW );
                     if (  status_spw != RTEMS_SUCCESSFUL )
                     {
                         PRINTF1("in INIT *** ERR spacewire_start_link code %d\n",  status_spw )
                     }
                 }
                 // </SPACEWIRE INITIALIZATION>
                 // ***************************
                 status = start_all_tasks();     // start all tasks
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in INIT *** ERR in start_all_tasks, code %d", status)
                 }
                 // start RECV and SEND *AFTER* SpaceWire Initialization, due to the timeout of the start call during the initialization
                 status = start_recv_send_tasks();
                 if ( status != RTEMS_SUCCESSFUL )
                 {
                     PRINTF1("in INIT *** ERR start_recv_send_tasks code %d\n",  status )
                 }
                 // suspend science tasks, they will be restarted later depending on the mode
                 status = suspend_science_tasks();   // suspend science tasks (not done in stop_current_mode if current mode = STANDBY)
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in INIT *** in suspend_science_tasks *** ERR code: %d\n", status)
                 }
                 // configure IRQ handling for the waveform picker unit
                 status = rtems_interrupt_catch( waveforms_isr,
                                                IRQ_SPARC_WAVEFORM_PICKER,
                                                &old_isr_handler) ;
                 // configure IRQ handling for the spectral matrices unit
                 status = rtems_interrupt_catch( spectral_matrices_isr,
                                                IRQ_SPARC_SPECTRAL_MATRIX,
                                                &old_isr_handler) ;
                 // if the spacewire link is not up then send an event to the SPIQ task for link recovery
                 if ( status_spw != RTEMS_SUCCESSFUL )
                 {
                     status = rtems_event_send( Task_id[TASKID_SPIQ], SPW_LINKERR_EVENT );
                     if ( status != RTEMS_SUCCESSFUL ) {
                         PRINTF1("in INIT *** ERR rtems_event_send to SPIQ code %d\n",  status )
                     }
                 }
                 BOOT_PRINTF("delete INIT\n")
                 set_hk_lfr_sc_potential_flag( true );
                 status = rtems_task_delete(RTEMS_SELF);
             }
             void init_local_mode_parameters( void )
             {
                 /** This function initialize the param_local global variable with default values.
                  *
                  */
                 unsigned int i;
                 // LOCAL PARAMETERS
                 BOOT_PRINTF1("local_sbm1_nb_cwf_max %d \n", param_local.local_sbm1_nb_cwf_max)
                 BOOT_PRINTF1("local_sbm2_nb_cwf_max %d \n", param_local.local_sbm2_nb_cwf_max)
                 BOOT_PRINTF1("nb_interrupt_f0_MAX = %d\n", param_local.local_nb_interrupt_f0_MAX)
                 // init sequence counters
                 for(i = 0; i<SEQ_CNT_NB_DEST_ID; i++)
                 {
                     sequenceCounters_TC_EXE[i] = 0x00;
                     sequenceCounters_TM_DUMP[i] = 0x00;
                 }
                 sequenceCounters_SCIENCE_NORMAL_BURST = 0x00;
                 sequenceCounters_SCIENCE_SBM1_SBM2 =    0x00;
                 sequenceCounterHK =                     TM_PACKET_SEQ_CTRL_STANDALONE << 8;
             }
             void reset_local_time( void )
             {
                 time_management_regs->ctrl = time_management_regs->ctrl | 0x02;  // [0010] software reset, coarse time = 0x80000000
             }
             void create_names( void ) // create all names for tasks and queues
             {
                 /** This function creates all RTEMS names used in the software for tasks and queues.
                  *
                  * @return RTEMS directive status codes:
                  * - RTEMS_SUCCESSFUL - successful completion
                  *
                  */
                 // task names
                 Task_name[TASKID_RECV] = rtems_build_name( 'R', 'E', 'C', 'V' );
                 Task_name[TASKID_ACTN] = rtems_build_name( 'A', 'C', 'T', 'N' );
                 Task_name[TASKID_SPIQ] = rtems_build_name( 'S', 'P', 'I', 'Q' );
                 Task_name[TASKID_LOAD] = rtems_build_name( 'L', 'O', 'A', 'D' );
                 Task_name[TASKID_AVF0] = rtems_build_name( 'A', 'V', 'F', '0' );
                 Task_name[TASKID_SWBD] = rtems_build_name( 'S', 'W', 'B', 'D' );
                 Task_name[TASKID_WFRM] = rtems_build_name( 'W', 'F', 'R', 'M' );
                 Task_name[TASKID_DUMB] = rtems_build_name( 'D', 'U', 'M', 'B' );
                 Task_name[TASKID_HOUS] = rtems_build_name( 'H', 'O', 'U', 'S' );
                 Task_name[TASKID_PRC0] = rtems_build_name( 'P', 'R', 'C', '0' );
                 Task_name[TASKID_CWF3] = rtems_build_name( 'C', 'W', 'F', '3' );
                 Task_name[TASKID_CWF2] = rtems_build_name( 'C', 'W', 'F', '2' );
                 Task_name[TASKID_CWF1] = rtems_build_name( 'C', 'W', 'F', '1' );
                 Task_name[TASKID_SEND] = rtems_build_name( 'S', 'E', 'N', 'D' );
                 Task_name[TASKID_WTDG] = rtems_build_name( 'W', 'T', 'D', 'G' );
                 Task_name[TASKID_AVF1] = rtems_build_name( 'A', 'V', 'F', '1' );
                 Task_name[TASKID_PRC1] = rtems_build_name( 'P', 'R', 'C', '1' );
                 Task_name[TASKID_AVF2] = rtems_build_name( 'A', 'V', 'F', '2' );
                 Task_name[TASKID_PRC2] = rtems_build_name( 'P', 'R', 'C', '2' );
                 // rate monotonic period names
                 name_hk_rate_monotonic = rtems_build_name( 'H', 'O', 'U', 'S' );
                 misc_name[QUEUE_RECV] = rtems_build_name( 'Q', '_', 'R', 'V' );
                 misc_name[QUEUE_SEND] = rtems_build_name( 'Q', '_', 'S', 'D' );
                 misc_name[QUEUE_PRC0] = rtems_build_name( 'Q', '_', 'P', '0' );
                 misc_name[QUEUE_PRC1] = rtems_build_name( 'Q', '_', 'P', '1' );
                 misc_name[QUEUE_PRC2] = rtems_build_name( 'Q', '_', 'P', '2' );
             }
             int create_all_tasks( void ) // create all tasks which run in the software
             {
                 /** This function creates all RTEMS tasks used in the software.
                  *
                  * @return RTEMS directive status codes:
                  * - RTEMS_SUCCESSFUL - task created successfully
                  * - RTEMS_INVALID_ADDRESS - id is NULL
                  * - RTEMS_INVALID_NAME - invalid task name
                  * - RTEMS_INVALID_PRIORITY - invalid task priority
                  * - RTEMS_MP_NOT_CONFIGURED - multiprocessing not configured
                  * - RTEMS_TOO_MANY - too many tasks created
                  * - RTEMS_UNSATISFIED - not enough memory for stack/FP context
                  * - RTEMS_TOO_MANY - too many global objects
                  *
                  */
                 rtems_status_code status;
                 //**********
                 // SPACEWIRE
                 // RECV
                 status = rtems_task_create(
                     Task_name[TASKID_RECV], TASK_PRIORITY_RECV, RTEMS_MINIMUM_STACK_SIZE,
                     RTEMS_DEFAULT_MODES,
                     RTEMS_DEFAULT_ATTRIBUTES, &Task_id[TASKID_RECV]
                 );
                 if (status == RTEMS_SUCCESSFUL) // SEND
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_SEND], TASK_PRIORITY_SEND, RTEMS_MINIMUM_STACK_SIZE * 2,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_SEND]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // WTDG
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_WTDG], TASK_PRIORITY_WTDG, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES, &Task_id[TASKID_WTDG]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // ACTN
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_ACTN], TASK_PRIORITY_ACTN, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES | RTEMS_NO_PREEMPT,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_ACTN]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // SPIQ
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_SPIQ], TASK_PRIORITY_SPIQ, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES | RTEMS_NO_PREEMPT,
                         RTEMS_DEFAULT_ATTRIBUTES, &Task_id[TASKID_SPIQ]
                     );
                 }
                 //******************
                 // SPECTRAL MATRICES
                 if (status == RTEMS_SUCCESSFUL) // AVF0
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_AVF0], TASK_PRIORITY_AVF0, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_AVF0]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // PRC0
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_PRC0], TASK_PRIORITY_PRC0, RTEMS_MINIMUM_STACK_SIZE * 2,
                         RTEMS_DEFAULT_MODES | RTEMS_NO_PREEMPT,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_PRC0]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // AVF1
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_AVF1], TASK_PRIORITY_AVF1, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_AVF1]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // PRC1
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_PRC1], TASK_PRIORITY_PRC1, RTEMS_MINIMUM_STACK_SIZE * 2,
                         RTEMS_DEFAULT_MODES | RTEMS_NO_PREEMPT,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_PRC1]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // AVF2
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_AVF2], TASK_PRIORITY_AVF2, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_AVF2]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // PRC2
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_PRC2], TASK_PRIORITY_PRC2, RTEMS_MINIMUM_STACK_SIZE * 2,
                         RTEMS_DEFAULT_MODES | RTEMS_NO_PREEMPT,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_PRC2]
                     );
                 }
                 //****************
                 // WAVEFORM PICKER
                 if (status == RTEMS_SUCCESSFUL) // WFRM
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_WFRM], TASK_PRIORITY_WFRM, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_WFRM]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // CWF3
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_CWF3], TASK_PRIORITY_CWF3, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_CWF3]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // CWF2
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_CWF2], TASK_PRIORITY_CWF2, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_CWF2]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // CWF1
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_CWF1], TASK_PRIORITY_CWF1, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_CWF1]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // SWBD
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_SWBD], TASK_PRIORITY_SWBD, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_SWBD]
                     );
                 }
                 //*****
                 // MISC
                 if (status == RTEMS_SUCCESSFUL) // LOAD
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_LOAD], TASK_PRIORITY_LOAD, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES, &Task_id[TASKID_LOAD]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // DUMB
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_DUMB], TASK_PRIORITY_DUMB, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES, &Task_id[TASKID_DUMB]
                     );
                 }
                 if (status == RTEMS_SUCCESSFUL) // HOUS
                 {
                     status = rtems_task_create(
                         Task_name[TASKID_HOUS], TASK_PRIORITY_HOUS, RTEMS_MINIMUM_STACK_SIZE,
                         RTEMS_DEFAULT_MODES,
                         RTEMS_DEFAULT_ATTRIBUTES | RTEMS_FLOATING_POINT, &Task_id[TASKID_HOUS]
                     );
                 }
                 return status;
             }
             int start_recv_send_tasks( void )
             {
                 rtems_status_code status;
                 status = rtems_task_start( Task_id[TASKID_RECV], recv_task, 1 );
                 if (status!=RTEMS_SUCCESSFUL) {
                     BOOT_PRINTF("in INIT *** Error starting TASK_RECV\n")
                 }
                 if (status == RTEMS_SUCCESSFUL)     // SEND
                 {
                     status = rtems_task_start( Task_id[TASKID_SEND], send_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_SEND\n")
                     }
                 }
                 return status;
             }
             int start_all_tasks( void ) // start all tasks except SEND RECV and HOUS
             {
                 /** This function starts all RTEMS tasks used in the software.
                  *
                  * @return RTEMS directive status codes:
                  * - RTEMS_SUCCESSFUL - ask started successfully
                  * - RTEMS_INVALID_ADDRESS - invalid task entry point
                  * - RTEMS_INVALID_ID - invalid task id
                  * - RTEMS_INCORRECT_STATE - task not in the dormant state
                  * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot start remote task
                  *
                  */
                 // starts all the tasks fot eh flight software
                 rtems_status_code status;
                 //**********
                 // SPACEWIRE
                 status = rtems_task_start( Task_id[TASKID_SPIQ], spiq_task, 1 );
                 if (status!=RTEMS_SUCCESSFUL) {
                     BOOT_PRINTF("in INIT *** Error starting TASK_SPIQ\n")
                 }
                 if (status == RTEMS_SUCCESSFUL)     // WTDG
                 {
                     status = rtems_task_start( Task_id[TASKID_WTDG], wtdg_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_WTDG\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // ACTN
                 {
                     status = rtems_task_start( Task_id[TASKID_ACTN], actn_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_ACTN\n")
                     }
                 }
                 //******************
                 // SPECTRAL MATRICES
                 if (status == RTEMS_SUCCESSFUL)     // AVF0
                 {
                     status = rtems_task_start( Task_id[TASKID_AVF0], avf0_task, LFR_MODE_STANDBY );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_AVF0\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // PRC0
                 {
                     status = rtems_task_start( Task_id[TASKID_PRC0], prc0_task, LFR_MODE_STANDBY );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_PRC0\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // AVF1
                 {
                     status = rtems_task_start( Task_id[TASKID_AVF1], avf1_task, LFR_MODE_STANDBY );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_AVF1\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // PRC1
                 {
                     status = rtems_task_start( Task_id[TASKID_PRC1], prc1_task, LFR_MODE_STANDBY );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_PRC1\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // AVF2
                 {
                     status = rtems_task_start( Task_id[TASKID_AVF2], avf2_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_AVF2\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // PRC2
                 {
                     status = rtems_task_start( Task_id[TASKID_PRC2], prc2_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_PRC2\n")
                     }
                 }
                 //****************
                 // WAVEFORM PICKER
                 if (status == RTEMS_SUCCESSFUL)     // WFRM
                 {
                     status = rtems_task_start( Task_id[TASKID_WFRM], wfrm_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_WFRM\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // CWF3
                 {
                     status = rtems_task_start( Task_id[TASKID_CWF3], cwf3_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_CWF3\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // CWF2
                 {
                     status = rtems_task_start( Task_id[TASKID_CWF2], cwf2_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_CWF2\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // CWF1
                 {
                     status = rtems_task_start( Task_id[TASKID_CWF1], cwf1_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_CWF1\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // SWBD
                 {
                     status = rtems_task_start( Task_id[TASKID_SWBD], swbd_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_SWBD\n")
                     }
                 }
                 //*****
                 // MISC
                 if (status == RTEMS_SUCCESSFUL)     // HOUS
                 {
                     status = rtems_task_start( Task_id[TASKID_HOUS], hous_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_HOUS\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // DUMB
                 {
                     status = rtems_task_start( Task_id[TASKID_DUMB], dumb_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_DUMB\n")
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)     // LOAD
                 {
                     status = rtems_task_start( Task_id[TASKID_LOAD], load_task, 1 );
                     if (status!=RTEMS_SUCCESSFUL) {
                         BOOT_PRINTF("in INIT *** Error starting TASK_LOAD\n")
                     }
                 }
                 return status;
             }
             rtems_status_code create_message_queues( void ) // create the two message queues used in the software
             {
                 rtems_status_code status_recv;
                 rtems_status_code status_send;
                 rtems_status_code status_q_p0;
                 rtems_status_code status_q_p1;
                 rtems_status_code status_q_p2;
                 rtems_status_code ret;
                 rtems_id queue_id;
                 //****************************************
                 // create the queue for handling valid TCs
                 status_recv = rtems_message_queue_create( misc_name[QUEUE_RECV],
                                                           MSG_QUEUE_COUNT_RECV, CCSDS_TC_PKT_MAX_SIZE,
                                                      RTEMS_FIFO | RTEMS_LOCAL, &queue_id );
                 if ( status_recv != RTEMS_SUCCESSFUL ) {
                     PRINTF1("in create_message_queues *** ERR creating QUEU queue, %d\n", status_recv)
                 }
                 //************************************************
                 // create the queue for handling TM packet sending
                 status_send = rtems_message_queue_create( misc_name[QUEUE_SEND],
                                                           MSG_QUEUE_COUNT_SEND, MSG_QUEUE_SIZE_SEND,
                                                   RTEMS_FIFO | RTEMS_LOCAL, &queue_id );
                 if ( status_send != RTEMS_SUCCESSFUL ) {
                     PRINTF1("in create_message_queues *** ERR creating PKTS queue, %d\n", status_send)
                 }
                 //*****************************************************************************
                 // create the queue for handling averaged spectral matrices for processing @ f0
                 status_q_p0 = rtems_message_queue_create( misc_name[QUEUE_PRC0],
                                                           MSG_QUEUE_COUNT_PRC0, MSG_QUEUE_SIZE_PRC0,
                                                   RTEMS_FIFO | RTEMS_LOCAL, &queue_id );
                 if ( status_q_p0 != RTEMS_SUCCESSFUL ) {
                     PRINTF1("in create_message_queues *** ERR creating Q_P0 queue, %d\n", status_q_p0)
                 }
                 //*****************************************************************************
                 // create the queue for handling averaged spectral matrices for processing @ f1
                 status_q_p1 = rtems_message_queue_create( misc_name[QUEUE_PRC1],
                                                           MSG_QUEUE_COUNT_PRC1, MSG_QUEUE_SIZE_PRC1,
                                                   RTEMS_FIFO | RTEMS_LOCAL, &queue_id );
                 if ( status_q_p1 != RTEMS_SUCCESSFUL ) {
                     PRINTF1("in create_message_queues *** ERR creating Q_P1 queue, %d\n", status_q_p1)
                 }
                 //*****************************************************************************
                 // create the queue for handling averaged spectral matrices for processing @ f2
                 status_q_p2 = rtems_message_queue_create( misc_name[QUEUE_PRC2],
                                                           MSG_QUEUE_COUNT_PRC2, MSG_QUEUE_SIZE_PRC2,
                                                   RTEMS_FIFO | RTEMS_LOCAL, &queue_id );
                 if ( status_q_p2 != RTEMS_SUCCESSFUL ) {
                     PRINTF1("in create_message_queues *** ERR creating Q_P2 queue, %d\n", status_q_p2)
                 }
                 if ( status_recv != RTEMS_SUCCESSFUL )
                 {
                     ret = status_recv;
                 }
                 else if( status_send != RTEMS_SUCCESSFUL )
                 {
                     ret = status_send;
                 }
                 else if( status_q_p0 != RTEMS_SUCCESSFUL )
                 {
                     ret = status_q_p0;
                 }
                 else if( status_q_p1 != RTEMS_SUCCESSFUL )
                 {
                     ret = status_q_p1;
                 }
                 else
                 {
                     ret = status_q_p2;
                 }
                 return ret;
             }
             rtems_status_code get_message_queue_id_send( rtems_id *queue_id )
             {
                 rtems_status_code status;
                 rtems_name queue_name;
                 queue_name = rtems_build_name( 'Q', '_', 'S', 'D' );
                 status =  rtems_message_queue_ident( queue_name, 0, queue_id );
                 return status;
             }
             rtems_status_code get_message_queue_id_recv( rtems_id *queue_id )
             {
                 rtems_status_code status;
                 rtems_name queue_name;
                 queue_name = rtems_build_name( 'Q', '_', 'R', 'V' );
                 status =  rtems_message_queue_ident( queue_name, 0, queue_id );
                 return status;
             }
             rtems_status_code get_message_queue_id_prc0( rtems_id *queue_id )
             {
                 rtems_status_code status;
                 rtems_name queue_name;
                 queue_name = rtems_build_name( 'Q', '_', 'P', '0' );
                 status =  rtems_message_queue_ident( queue_name, 0, queue_id );
                 return status;
             }
             rtems_status_code get_message_queue_id_prc1( rtems_id *queue_id )
             {
                 rtems_status_code status;
                 rtems_name queue_name;
                 queue_name = rtems_build_name( 'Q', '_', 'P', '1' );
                 status =  rtems_message_queue_ident( queue_name, 0, queue_id );
                 return status;
             }
             rtems_status_code get_message_queue_id_prc2( rtems_id *queue_id )
             {
                 rtems_status_code status;
                 rtems_name queue_name;
                 queue_name = rtems_build_name( 'Q', '_', 'P', '2' );
                 status =  rtems_message_queue_ident( queue_name, 0, queue_id );
                 return status;
             }
             void update_queue_max_count( rtems_id queue_id, unsigned char*fifo_size_max )
             {
                 u_int32_t count;
                 rtems_status_code status;
                 status = rtems_message_queue_get_number_pending( queue_id, &count );
                 count = count + 1;
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in update_queue_max_count *** ERR = %d\n", status)
                 }
                 else
                 {
                     if (count > *fifo_size_max)
                     {
                         *fifo_size_max = count;
                     }
                 }
             }
             void init_ring(ring_node ring[], unsigned char nbNodes, volatile int buffer[], unsigned int bufferSize )
             {
                 unsigned char i;
                 //***************
                 // BUFFER ADDRESS
                 for(i=0; i<nbNodes; i++)
                 {
                     ring[i].coarseTime = 0xffffffff;
                     ring[i].fineTime = 0xffffffff;
                     ring[i].sid = 0x00;
                     ring[i].status = 0x00;
                     ring[i].buffer_address  = (int) &buffer[ i * bufferSize ];
                 }
                 //*****
                 // NEXT
                  ring[ nbNodes - 1 ].next  = (ring_node*) &ring[ 0 ];
                  for(i=0; i<nbNodes-1; i++)
                  {
                      ring[i].next      = (ring_node*) &ring[ i + 1 ];
                  }
                 //*********
                 // PREVIOUS
                 ring[ 0 ].previous       = (ring_node*) &ring[ nbNodes - 1 ];
                 for(i=1; i<nbNodes; i++)
                 {
                     ring[i].previous   = (ring_node*) &ring[ i - 1 ];
                 }
             }

src/fsw_misc.c +46 0

             /** General usage functions and RTEMS tasks.
              *
              * @file
              * @author P. LEROY
              *
              */
             #include "fsw_misc.h"
             void timer_configure(unsigned char timer, unsigned int clock_divider,
                                 unsigned char interrupt_level, rtems_isr (*timer_isr)() )
             {
                 /** This function configures a GPTIMER timer instantiated in the VHDL design.
                  *
                  * @param gptimer_regs points to the APB registers of the GPTIMER IP core.
                  * @param timer is the number of the timer in the IP core (several timers can be instantiated).
                  * @param clock_divider is the divider of the 1 MHz clock that will be configured.
                  * @param interrupt_level is the interrupt level that the timer drives.
                  * @param timer_isr is the interrupt subroutine that will be attached to the IRQ driven by the timer.
                  *
                  * Interrupt levels are described in the SPARC documentation sparcv8.pdf p.76
                  *
                  */
                 rtems_status_code status;
                 rtems_isr_entry old_isr_handler;
                 gptimer_regs->timer[timer].ctrl = 0x00;  // reset the control register
                 status = rtems_interrupt_catch( timer_isr, interrupt_level, &old_isr_handler) ; // see sparcv8.pdf p.76 for interrupt levels
                 if (status!=RTEMS_SUCCESSFUL)
                 {
                     PRINTF("in configure_timer *** ERR rtems_interrupt_catch\n")
                 }
                 timer_set_clock_divider( timer, clock_divider);
             }
             void timer_start(unsigned char timer)
             {
                 /** This function starts a GPTIMER timer.
                  *
                  * @param gptimer_regs points to the APB registers of the GPTIMER IP core.
                  * @param timer is the number of the timer in the IP core (several timers can be instantiated).
                  *
                  */
                 gptimer_regs->timer[timer].ctrl = gptimer_regs->timer[timer].ctrl | 0x00000010;  // clear pending IRQ if any
                 gptimer_regs->timer[timer].ctrl = gptimer_regs->timer[timer].ctrl | 0x00000004;  // LD load value from the reload register
                 gptimer_regs->timer[timer].ctrl = gptimer_regs->timer[timer].ctrl | 0x00000001;  // EN enable the timer
                 gptimer_regs->timer[timer].ctrl = gptimer_regs->timer[timer].ctrl | 0x00000002;  // RS restart
                 gptimer_regs->timer[timer].ctrl = gptimer_regs->timer[timer].ctrl | 0x00000008;  // IE interrupt enable
             }
             void timer_stop(unsigned char timer)
             {
                 /** This function stops a GPTIMER timer.
                  *
                  * @param gptimer_regs points to the APB registers of the GPTIMER IP core.
                  * @param timer is the number of the timer in the IP core (several timers can be instantiated).
                  *
                  */
                 gptimer_regs->timer[timer].ctrl = gptimer_regs->timer[timer].ctrl & 0xfffffffe;  // EN enable the timer
                 gptimer_regs->timer[timer].ctrl = gptimer_regs->timer[timer].ctrl & 0xffffffef;  // IE interrupt enable
                 gptimer_regs->timer[timer].ctrl = gptimer_regs->timer[timer].ctrl | 0x00000010;  // clear pending IRQ if any
             }
             void timer_set_clock_divider(unsigned char timer, unsigned int clock_divider)
             {
                 /** This function sets the clock divider of a GPTIMER timer.
                  *
                  * @param gptimer_regs points to the APB registers of the GPTIMER IP core.
                  * @param timer is the number of the timer in the IP core (several timers can be instantiated).
                  * @param clock_divider is the divider of the 1 MHz clock that will be configured.
                  *
                  */
                 gptimer_regs->timer[timer].reload = clock_divider; // base clock frequency is 1 MHz
             }
             // WATCHDOG
             rtems_isr watchdog_isr( rtems_vector_number vector )
             {
                 rtems_status_code status_code;
                 status_code = rtems_event_send( Task_id[TASKID_DUMB], RTEMS_EVENT_12 );
             }
             void watchdog_configure(void)
             {
                 /** This function configure the watchdog.
                  *
                  * @param gptimer_regs points to the APB registers of the GPTIMER IP core.
                  * @param timer is the number of the timer in the IP core (several timers can be instantiated).
                  *
                  * The watchdog is a timer provided by the GPTIMER IP core of the GRLIB.
                  *
                  */
                 LEON_Mask_interrupt( IRQ_GPTIMER_WATCHDOG );    // mask gptimer/watchdog interrupt during configuration
                 timer_configure( TIMER_WATCHDOG, CLKDIV_WATCHDOG, IRQ_SPARC_GPTIMER_WATCHDOG, watchdog_isr );
                 LEON_Clear_interrupt( IRQ_GPTIMER_WATCHDOG );   // clear gptimer/watchdog interrupt
             }
             void watchdog_stop(void)
             {
                 LEON_Mask_interrupt( IRQ_GPTIMER_WATCHDOG );                  // mask gptimer/watchdog interrupt line
                 timer_stop( TIMER_WATCHDOG );
                 LEON_Clear_interrupt( IRQ_GPTIMER_WATCHDOG );                 // clear gptimer/watchdog interrupt
             }
             void watchdog_reload(void)
             {
                 /** This function reloads the watchdog timer counter with the timer reload value.
                  *
                  *
                  */
                 gptimer_regs->timer[TIMER_WATCHDOG].ctrl = gptimer_regs->timer[TIMER_WATCHDOG].ctrl | 0x00000004;  // LD load value from the reload register
             }
             void watchdog_start(void)
             {
                 /** This function starts the watchdog timer.
                  *
                  * @param gptimer_regs points to the APB registers of the GPTIMER IP core.
                  * @param timer is the number of the timer in the IP core (several timers can be instantiated).
                  *
                  */
                 LEON_Clear_interrupt( IRQ_GPTIMER_WATCHDOG );
                 gptimer_regs->timer[TIMER_WATCHDOG].ctrl = gptimer_regs->timer[TIMER_WATCHDOG].ctrl | 0x00000010;  // clear pending IRQ if any
                 gptimer_regs->timer[TIMER_WATCHDOG].ctrl = gptimer_regs->timer[TIMER_WATCHDOG].ctrl | 0x00000004;  // LD load value from the reload register
                 gptimer_regs->timer[TIMER_WATCHDOG].ctrl = gptimer_regs->timer[TIMER_WATCHDOG].ctrl | 0x00000001;  // EN enable the timer
                 gptimer_regs->timer[TIMER_WATCHDOG].ctrl = gptimer_regs->timer[TIMER_WATCHDOG].ctrl | 0x00000008;  // IE interrupt enable
                 LEON_Unmask_interrupt( IRQ_GPTIMER_WATCHDOG );
             }
             int send_console_outputs_on_apbuart_port( void ) // Send the console outputs on the apbuart port
             {
                 struct apbuart_regs_str *apbuart_regs = (struct apbuart_regs_str *) REGS_ADDR_APBUART;
                 apbuart_regs->ctrl = APBUART_CTRL_REG_MASK_TE;
                 return 0;
             }
             int enable_apbuart_transmitter( void )  // set the bit 1, TE Transmitter Enable to 1 in the APBUART control register
             {
                 struct apbuart_regs_str *apbuart_regs = (struct apbuart_regs_str *) REGS_ADDR_APBUART;
                 apbuart_regs->ctrl = apbuart_regs->ctrl | APBUART_CTRL_REG_MASK_TE;
                 return 0;
             }
             void set_apbuart_scaler_reload_register(unsigned int regs, unsigned int value)
             {
                 /** This function sets the scaler reload register of the apbuart module
                  *
                  * @param regs is the address of the apbuart registers in memory
                  * @param value is the value that will be stored in the scaler register
                  *
                  * The value shall be set by the software to get data on the serial interface.
                  *
                  */
                 struct apbuart_regs_str *apbuart_regs = (struct apbuart_regs_str *) regs;
                 apbuart_regs->scaler = value;
                 BOOT_PRINTF1("OK  *** apbuart port scaler reload register set to 0x%x\n", value)
             }
             //************
             // RTEMS TASKS
             rtems_task load_task(rtems_task_argument argument)
             {
                 BOOT_PRINTF("in LOAD *** \n")
                 rtems_status_code status;
                 unsigned int i;
                 unsigned int j;
                 rtems_name name_watchdog_rate_monotonic;  // name of the watchdog rate monotonic
                 rtems_id watchdog_period_id;              // id of the watchdog rate monotonic period
                 name_watchdog_rate_monotonic = rtems_build_name( 'L', 'O', 'A', 'D' );
                 status = rtems_rate_monotonic_create( name_watchdog_rate_monotonic, &watchdog_period_id );
                 if( status != RTEMS_SUCCESSFUL ) {
                     PRINTF1( "in LOAD *** rtems_rate_monotonic_create failed with status of %d\n", status )
                 }
                 i = 0;
                 j = 0;
                 watchdog_configure();
                 watchdog_start();
                 while(1){
                     status = rtems_rate_monotonic_period( watchdog_period_id, WATCHDOG_PERIOD );
                     watchdog_reload();
                     i = i + 1;
                     if ( i == 10 )
                     {
                         i = 0;
                         j = j + 1;
                         PRINTF1("%d\n", j)
                     }
                     if (j == 3 )
                     {
                         status = rtems_task_delete(RTEMS_SELF);
                     }
                 }
             }
             rtems_task hous_task(rtems_task_argument argument)
             {
                 rtems_status_code status;
                 rtems_status_code spare_status;
                 rtems_id queue_id;
                 rtems_rate_monotonic_period_status period_status;
                 status =  get_message_queue_id_send( &queue_id );
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in HOUS *** ERR get_message_queue_id_send %d\n", status)
                 }
                 BOOT_PRINTF("in HOUS ***\n")
                 if (rtems_rate_monotonic_ident( name_hk_rate_monotonic, &HK_id) != RTEMS_SUCCESSFUL) {
                     status = rtems_rate_monotonic_create( name_hk_rate_monotonic, &HK_id );
                     if( status != RTEMS_SUCCESSFUL ) {
                         PRINTF1( "rtems_rate_monotonic_create failed with status of %d\n", status )
                     }
                 }
                 status = rtems_rate_monotonic_cancel(HK_id);
                 if( status != RTEMS_SUCCESSFUL ) {
                     PRINTF1( "ERR *** in HOUS *** rtems_rate_monotonic_cancel(HK_id) ***code: %d\n", status )
                 }
                 else {
                     DEBUG_PRINTF("OK  *** in HOUS *** rtems_rate_monotonic_cancel(HK_id)\n")
                 }
                 // startup phase
                 status = rtems_rate_monotonic_period( HK_id, SY_LFR_TIME_SYN_TIMEOUT_in_ticks );
                 status = rtems_rate_monotonic_get_status( HK_id, &period_status );
                 DEBUG_PRINTF1("startup HK, HK_id status = %d\n", period_status.state)
                 while(period_status.state != RATE_MONOTONIC_EXPIRED )   // after SY_LFR_TIME_SYN_TIMEOUT ms, starts HK anyway
                 {
                     if ((time_management_regs->coarse_time & 0x80000000) == 0x00000000) // check time synchronization
                     {
                         break;  // break if LFR is synchronized
                     }
                     else
                     {
                         status = rtems_rate_monotonic_get_status( HK_id, &period_status );
             //            sched_yield();
                         status = rtems_task_wake_after( 10 );        // wait SY_LFR_DPU_CONNECT_TIMEOUT 100 ms = 10 * 10 ms
                     }
                 }
                 status = rtems_rate_monotonic_cancel(HK_id);
                 DEBUG_PRINTF1("startup HK, HK_id status = %d\n", period_status.state)
                 set_hk_lfr_reset_cause( POWER_ON );
                 while(1){ // launch the rate monotonic task
                     status = rtems_rate_monotonic_period( HK_id, HK_PERIOD );
                     if ( status != RTEMS_SUCCESSFUL ) {
                         PRINTF1( "in HOUS *** ERR period: %d\n", status);
                         spare_status = rtems_event_send( Task_id[TASKID_DUMB], RTEMS_EVENT_6 );
                     }
                     else {
                         housekeeping_packet.packetSequenceControl[0] = (unsigned char) (sequenceCounterHK >> 8);
                         housekeeping_packet.packetSequenceControl[1] = (unsigned char) (sequenceCounterHK     );
                         increment_seq_counter( &sequenceCounterHK );
                         housekeeping_packet.time[0] = (unsigned char) (time_management_regs->coarse_time>>24);
                         housekeeping_packet.time[1] = (unsigned char) (time_management_regs->coarse_time>>16);
                         housekeeping_packet.time[2] = (unsigned char) (time_management_regs->coarse_time>>8);
                         housekeeping_packet.time[3] = (unsigned char) (time_management_regs->coarse_time);
                         housekeeping_packet.time[4] = (unsigned char) (time_management_regs->fine_time>>8);
                         housekeeping_packet.time[5] = (unsigned char) (time_management_regs->fine_time);
                         spacewire_update_statistics();
+                        hk_lfr_le_me_he_update();
                         housekeeping_packet.hk_lfr_q_sd_fifo_size_max = hk_lfr_q_sd_fifo_size_max;
                         housekeeping_packet.hk_lfr_q_rv_fifo_size_max = hk_lfr_q_rv_fifo_size_max;
                         housekeeping_packet.hk_lfr_q_p0_fifo_size_max = hk_lfr_q_p0_fifo_size_max;
                         housekeeping_packet.hk_lfr_q_p1_fifo_size_max = hk_lfr_q_p1_fifo_size_max;
                         housekeeping_packet.hk_lfr_q_p2_fifo_size_max = hk_lfr_q_p2_fifo_size_max;
                         housekeeping_packet.sy_lfr_common_parameters_spare  = parameter_dump_packet.sy_lfr_common_parameters_spare;
                         housekeeping_packet.sy_lfr_common_parameters        = parameter_dump_packet.sy_lfr_common_parameters;
                         get_temperatures( housekeeping_packet.hk_lfr_temp_scm );
                         get_v_e1_e2_f3(   housekeeping_packet.hk_lfr_sc_v_f3  );
                         get_cpu_load( (unsigned char *) &housekeeping_packet.hk_lfr_cpu_load );
                         // SEND PACKET
                         status =  rtems_message_queue_send( queue_id, &housekeeping_packet,
                                                             PACKET_LENGTH_HK + CCSDS_TC_TM_PACKET_OFFSET + CCSDS_PROTOCOLE_EXTRA_BYTES);
                         if (status != RTEMS_SUCCESSFUL) {
                             PRINTF1("in HOUS *** ERR send: %d\n", status)
                         }
                     }
                 }
                 PRINTF("in HOUS *** deleting task\n")
                 status = rtems_task_delete( RTEMS_SELF ); // should not return
                 return;
             }
             rtems_task dumb_task( rtems_task_argument unused )
             {
                 /** This RTEMS taks is used to print messages without affecting the general behaviour of the software.
                  *
                  * @param unused is the starting argument of the RTEMS task
                  *
                  * The DUMB taks waits for RTEMS events and print messages depending on the incoming events.
                  *
                  */
                 unsigned int i;
                 unsigned int intEventOut;
                 unsigned int coarse_time = 0;
                 unsigned int fine_time = 0;
                 rtems_event_set event_out;
                 char *DumbMessages[13] = {"in DUMB *** default",                                            // RTEMS_EVENT_0
                                     "in DUMB *** timecode_irq_handler",                                     // RTEMS_EVENT_1
                                     "in DUMB *** f3 buffer changed",                                        // RTEMS_EVENT_2
                                     "in DUMB *** in SMIQ *** Error sending event to AVF0",                  // RTEMS_EVENT_3
                                     "in DUMB *** spectral_matrices_isr *** Error sending event to SMIQ",    // RTEMS_EVENT_4
                                     "in DUMB *** waveforms_simulator_isr",                                  // RTEMS_EVENT_5
                                     "VHDL SM *** two buffers f0 ready",                                     // RTEMS_EVENT_6
                                     "ready for dump",                                                       // RTEMS_EVENT_7
                                     "VHDL ERR *** spectral matrix",                                         // RTEMS_EVENT_8
                                     "tick",                                                                 // RTEMS_EVENT_9
                                     "VHDL ERR *** waveform picker",                                         // RTEMS_EVENT_10
                                     "VHDL ERR *** unexpected ready matrix values",                          // RTEMS_EVENT_11
                                     "WATCHDOG timer"                                                        // RTEMS_EVENT_12
                 };
                 BOOT_PRINTF("in DUMB *** \n")
                 while(1){
                     rtems_event_receive(RTEMS_EVENT_0 | RTEMS_EVENT_1 | RTEMS_EVENT_2 | RTEMS_EVENT_3
                                         | RTEMS_EVENT_4 | RTEMS_EVENT_5 | RTEMS_EVENT_6 | RTEMS_EVENT_7
                                         | RTEMS_EVENT_8 | RTEMS_EVENT_9 | RTEMS_EVENT_12,
                                         RTEMS_WAIT | RTEMS_EVENT_ANY, RTEMS_NO_TIMEOUT, &event_out); // wait for an RTEMS_EVENT
                     intEventOut =  (unsigned int) event_out;
                     for ( i=0; i<32; i++)
                     {
                         if ( ((intEventOut >> i) & 0x0001) != 0)
                         {
                             coarse_time = time_management_regs->coarse_time;
                             fine_time = time_management_regs->fine_time;
                             if (i==12)
                             {
                                 PRINTF1("%s\n", DumbMessages[12])
                             }
                         }
                     }
                 }
             }
             //*****************************
             // init housekeeping parameters
             void init_housekeeping_parameters( void )
             {
                 /** This function initialize the housekeeping_packet global variable with default values.
                  *
                  */
                 unsigned int i = 0;
                 unsigned char *parameters;
                 unsigned char sizeOfHK;
                 sizeOfHK = sizeof( Packet_TM_LFR_HK_t );
                 parameters = (unsigned char*) &housekeeping_packet;
                 for(i = 0; i< sizeOfHK; i++)
                 {
                     parameters[i] = 0x00;
                 }
                 housekeeping_packet.targetLogicalAddress = CCSDS_DESTINATION_ID;
                 housekeeping_packet.protocolIdentifier = CCSDS_PROTOCOLE_ID;
                 housekeeping_packet.reserved = DEFAULT_RESERVED;
                 housekeeping_packet.userApplication = CCSDS_USER_APP;
                 housekeeping_packet.packetID[0] = (unsigned char) (APID_TM_HK >> 8);
                 housekeeping_packet.packetID[1] = (unsigned char) (APID_TM_HK);
                 housekeeping_packet.packetSequenceControl[0] = TM_PACKET_SEQ_CTRL_STANDALONE;
                 housekeeping_packet.packetSequenceControl[1] = TM_PACKET_SEQ_CNT_DEFAULT;
                 housekeeping_packet.packetLength[0] = (unsigned char) (PACKET_LENGTH_HK >> 8);
                 housekeeping_packet.packetLength[1] = (unsigned char) (PACKET_LENGTH_HK     );
                 housekeeping_packet.spare1_pusVersion_spare2 = DEFAULT_SPARE1_PUSVERSION_SPARE2;
                 housekeeping_packet.serviceType = TM_TYPE_HK;
                 housekeeping_packet.serviceSubType = TM_SUBTYPE_HK;
                 housekeeping_packet.destinationID = TM_DESTINATION_ID_GROUND;
                 housekeeping_packet.sid = SID_HK;
                 // init status word
                 housekeeping_packet.lfr_status_word[0] = DEFAULT_STATUS_WORD_BYTE0;
                 housekeeping_packet.lfr_status_word[1] = DEFAULT_STATUS_WORD_BYTE1;
                 // init software version
                 housekeeping_packet.lfr_sw_version[0] = SW_VERSION_N1;
                 housekeeping_packet.lfr_sw_version[1] = SW_VERSION_N2;
                 housekeeping_packet.lfr_sw_version[2] = SW_VERSION_N3;
                 housekeeping_packet.lfr_sw_version[3] = SW_VERSION_N4;
                 // init fpga version
                 parameters = (unsigned char *) (REGS_ADDR_VHDL_VERSION);
                 housekeeping_packet.lfr_fpga_version[0] = parameters[1]; // n1
                 housekeeping_packet.lfr_fpga_version[1] = parameters[2]; // n2
                 housekeeping_packet.lfr_fpga_version[2] = parameters[3]; // n3
                 housekeeping_packet.hk_lfr_q_sd_fifo_size = MSG_QUEUE_COUNT_SEND;
                 housekeeping_packet.hk_lfr_q_rv_fifo_size = MSG_QUEUE_COUNT_RECV;
                 housekeeping_packet.hk_lfr_q_p0_fifo_size = MSG_QUEUE_COUNT_PRC0;
                 housekeeping_packet.hk_lfr_q_p1_fifo_size = MSG_QUEUE_COUNT_PRC1;
                 housekeeping_packet.hk_lfr_q_p2_fifo_size = MSG_QUEUE_COUNT_PRC2;
             }
             void increment_seq_counter( unsigned short *packetSequenceControl )
             {
                 /** This function increment the sequence counter passes in argument.
                  *
                  * The increment does not affect the grouping flag. In case of an overflow, the counter is reset to 0.
                  *
                  */
                 unsigned short segmentation_grouping_flag;
                 unsigned short sequence_cnt;
                 segmentation_grouping_flag  = TM_PACKET_SEQ_CTRL_STANDALONE << 8;   // keep bits 7 downto 6
                 sequence_cnt                = (*packetSequenceControl) & 0x3fff;    // [0011 1111 1111 1111]
                 if ( sequence_cnt < SEQ_CNT_MAX)
                 {
                     sequence_cnt = sequence_cnt + 1;
                 }
                 else
                 {
                     sequence_cnt = 0;
                 }
                 *packetSequenceControl = segmentation_grouping_flag | sequence_cnt ;
             }
             void getTime( unsigned char *time)
             {
                 /** This function write the current local time in the time buffer passed in argument.
                  *
                  */
                 time[0] = (unsigned char) (time_management_regs->coarse_time>>24);
                 time[1] = (unsigned char) (time_management_regs->coarse_time>>16);
                 time[2] = (unsigned char) (time_management_regs->coarse_time>>8);
                 time[3] = (unsigned char) (time_management_regs->coarse_time);
                 time[4] = (unsigned char) (time_management_regs->fine_time>>8);
                 time[5] = (unsigned char) (time_management_regs->fine_time);
             }
             unsigned long long int getTimeAsUnsignedLongLongInt( )
             {
                 /** This function write the current local time in the time buffer passed in argument.
                  *
                  */
                 unsigned long long int time;
                 time = ( (unsigned long long int) (time_management_regs->coarse_time & 0x7fffffff) << 16 )
                         + time_management_regs->fine_time;
                 return time;
             }
             void send_dumb_hk( void )
             {
                 Packet_TM_LFR_HK_t dummy_hk_packet;
                 unsigned char *parameters;
                 unsigned int i;
                 rtems_id queue_id;
                 dummy_hk_packet.targetLogicalAddress = CCSDS_DESTINATION_ID;
                 dummy_hk_packet.protocolIdentifier = CCSDS_PROTOCOLE_ID;
                 dummy_hk_packet.reserved = DEFAULT_RESERVED;
                 dummy_hk_packet.userApplication = CCSDS_USER_APP;
                 dummy_hk_packet.packetID[0] = (unsigned char) (APID_TM_HK >> 8);
                 dummy_hk_packet.packetID[1] = (unsigned char) (APID_TM_HK);
                 dummy_hk_packet.packetSequenceControl[0] = TM_PACKET_SEQ_CTRL_STANDALONE;
                 dummy_hk_packet.packetSequenceControl[1] = TM_PACKET_SEQ_CNT_DEFAULT;
                 dummy_hk_packet.packetLength[0] = (unsigned char) (PACKET_LENGTH_HK >> 8);
                 dummy_hk_packet.packetLength[1] = (unsigned char) (PACKET_LENGTH_HK     );
                 dummy_hk_packet.spare1_pusVersion_spare2 = DEFAULT_SPARE1_PUSVERSION_SPARE2;
                 dummy_hk_packet.serviceType = TM_TYPE_HK;
                 dummy_hk_packet.serviceSubType = TM_SUBTYPE_HK;
                 dummy_hk_packet.destinationID = TM_DESTINATION_ID_GROUND;
                 dummy_hk_packet.time[0] = (unsigned char) (time_management_regs->coarse_time>>24);
                 dummy_hk_packet.time[1] = (unsigned char) (time_management_regs->coarse_time>>16);
                 dummy_hk_packet.time[2] = (unsigned char) (time_management_regs->coarse_time>>8);
                 dummy_hk_packet.time[3] = (unsigned char) (time_management_regs->coarse_time);
                 dummy_hk_packet.time[4] = (unsigned char) (time_management_regs->fine_time>>8);
                 dummy_hk_packet.time[5] = (unsigned char) (time_management_regs->fine_time);
                 dummy_hk_packet.sid = SID_HK;
                 // init status word
                 dummy_hk_packet.lfr_status_word[0] = 0xff;
                 dummy_hk_packet.lfr_status_word[1] = 0xff;
                 // init software version
                 dummy_hk_packet.lfr_sw_version[0] = SW_VERSION_N1;
                 dummy_hk_packet.lfr_sw_version[1] = SW_VERSION_N2;
                 dummy_hk_packet.lfr_sw_version[2] = SW_VERSION_N3;
                 dummy_hk_packet.lfr_sw_version[3] = SW_VERSION_N4;
                 // init fpga version
                 parameters = (unsigned char *) (REGS_ADDR_WAVEFORM_PICKER + 0xb0);
                 dummy_hk_packet.lfr_fpga_version[0] = parameters[1]; // n1
                 dummy_hk_packet.lfr_fpga_version[1] = parameters[2]; // n2
                 dummy_hk_packet.lfr_fpga_version[2] = parameters[3]; // n3
                 parameters = (unsigned char *) &dummy_hk_packet.hk_lfr_cpu_load;
                 for (i=0; i<100; i++)
                 {
                     parameters[i] = 0xff;
                 }
                 get_message_queue_id_send( &queue_id );
                 rtems_message_queue_send( queue_id, &dummy_hk_packet,
                                             PACKET_LENGTH_HK + CCSDS_TC_TM_PACKET_OFFSET + CCSDS_PROTOCOLE_EXTRA_BYTES);
             }
             void get_temperatures( unsigned char *temperatures )
             {
                 unsigned char* temp_scm_ptr;
                 unsigned char* temp_pcb_ptr;
                 unsigned char* temp_fpga_ptr;
                 // SEL1 SEL0
                 // 0    0       => PCB
                 // 0    1       => FPGA
                 // 1    0       => SCM
                 temp_scm_ptr  = (unsigned char *) &time_management_regs->temp_scm;
                 temp_pcb_ptr =  (unsigned char *) &time_management_regs->temp_pcb;
                 temp_fpga_ptr = (unsigned char *) &time_management_regs->temp_fpga;
                 temperatures[0] = temp_scm_ptr[2];
                 temperatures[1] = temp_scm_ptr[3];
                 temperatures[2] = temp_pcb_ptr[2];
                 temperatures[3] = temp_pcb_ptr[3];
                 temperatures[4] = temp_fpga_ptr[2];
                 temperatures[5] = temp_fpga_ptr[3];
             }
             void get_v_e1_e2_f3( unsigned char *spacecraft_potential )
             {
                 unsigned char* v_ptr;
                 unsigned char* e1_ptr;
                 unsigned char* e2_ptr;
                 v_ptr  = (unsigned char *) &waveform_picker_regs->v;
                 e1_ptr = (unsigned char *) &waveform_picker_regs->e1;
                 e2_ptr = (unsigned char *) &waveform_picker_regs->e2;
                 spacecraft_potential[0] = v_ptr[2];
                 spacecraft_potential[1] = v_ptr[3];
                 spacecraft_potential[2] = e1_ptr[2];
                 spacecraft_potential[3] = e1_ptr[3];
                 spacecraft_potential[4] = e2_ptr[2];
                 spacecraft_potential[5] = e2_ptr[3];
             }
             void get_cpu_load( unsigned char *resource_statistics )
             {
                 unsigned char cpu_load;
                 cpu_load = lfr_rtems_cpu_usage_report();
                 // HK_LFR_CPU_LOAD
                 resource_statistics[0] = cpu_load;
                 // HK_LFR_CPU_LOAD_MAX
                 if (cpu_load > resource_statistics[1])
                 {
                      resource_statistics[1] = cpu_load;
                 }
                 // CPU_LOAD_AVE
                 resource_statistics[2] = 0;
             #ifndef PRINT_TASK_STATISTICS
                     rtems_cpu_usage_reset();
             #endif
             }
             void set_hk_lfr_sc_potential_flag( bool state )
             {
                 if (state == true)
                 {
                     housekeeping_packet.lfr_status_word[1] = housekeeping_packet.lfr_status_word[1] | 0x40;   // [0100 0000]
                 }
                 else
                 {
                     housekeeping_packet.lfr_status_word[1] = housekeeping_packet.lfr_status_word[1] & 0xbf;   // [1011 1111]
                 }
             }
             void set_hk_lfr_mag_fields_flag( bool state )
             {
                 if (state == true)
                 {
                     housekeeping_packet.lfr_status_word[1] = housekeeping_packet.lfr_status_word[1] | 0x20;   // [0010 0000]
                 }
                 else
                 {
                     housekeeping_packet.lfr_status_word[1] = housekeeping_packet.lfr_status_word[1] & 0xd7;   // [1101 1111]
                 }
             }
             void set_hk_lfr_calib_enable( bool state )
             {
                 if (state == true)
                 {
                     housekeeping_packet.lfr_status_word[1] = housekeeping_packet.lfr_status_word[1] | 0x08;   // [0000 1000]
                 }
                 else
                 {
                     housekeeping_packet.lfr_status_word[1] = housekeeping_packet.lfr_status_word[1] & 0xf7;   // [1111 0111]
                 }
             }
             void set_hk_lfr_reset_cause( enum lfr_reset_cause_t lfr_reset_cause )
             {
                 housekeeping_packet.lfr_status_word[1] = housekeeping_packet.lfr_status_word[1]
                         | (lfr_reset_cause & 0x07 );   // [0000 0111]
             }
+            void hk_lfr_le_me_he_update()
+            {
+                unsigned int hk_lfr_le_cnt;
+                unsigned int hk_lfr_me_cnt;
+                unsigned int hk_lfr_he_cnt;
+                hk_lfr_le_cnt = 0;
+                hk_lfr_me_cnt = 0;
+                hk_lfr_he_cnt = 0;
+                //update the low severity error counter
+                hk_lfr_le_cnt =
+                        housekeeping_packet.hk_lfr_dpu_spw_parity
+                        + housekeeping_packet.hk_lfr_dpu_spw_disconnect
+                        + housekeeping_packet.hk_lfr_dpu_spw_escape
+                        + housekeeping_packet.hk_lfr_dpu_spw_credit
+                        + housekeeping_packet.hk_lfr_dpu_spw_write_sync
+                        + housekeeping_packet.hk_lfr_dpu_spw_rx_ahb
+                        + housekeeping_packet.hk_lfr_dpu_spw_tx_ahb
+                        + housekeeping_packet.hk_lfr_time_timecode_ctr;
+                //update the medium severity error counter
+                hk_lfr_me_cnt =
+                        housekeeping_packet.hk_lfr_dpu_spw_early_eop
+                        + housekeeping_packet.hk_lfr_dpu_spw_invalid_addr
+                        + housekeeping_packet.hk_lfr_dpu_spw_eep
+                        + housekeeping_packet.hk_lfr_dpu_spw_rx_too_big;
+                //update the high severity error counter
+                hk_lfr_he_cnt = 0;
+                // update housekeeping packet counters, convert unsigned int numbers in 2 bytes numbers
+                // LE
+                housekeeping_packet.hk_lfr_le_cnt[0] = (unsigned char) ((hk_lfr_le_cnt & 0xff00) >> 8);
+                housekeeping_packet.hk_lfr_le_cnt[1] = (unsigned char)  (hk_lfr_le_cnt & 0x00ff);
+                // ME
+                housekeeping_packet.hk_lfr_me_cnt[0] = (unsigned char) ((hk_lfr_me_cnt & 0xff00) >> 8);
+                housekeeping_packet.hk_lfr_me_cnt[1] = (unsigned char)  (hk_lfr_me_cnt & 0x00ff);
+                // HE
+                housekeeping_packet.hk_lfr_he_cnt[0] = (unsigned char) ((hk_lfr_he_cnt & 0xff00) >> 8);
+                housekeeping_packet.hk_lfr_he_cnt[1] = (unsigned char)  (hk_lfr_he_cnt & 0x00ff);
+            }

src/fsw_spacewire.c 0 -13

             /** Functions related to the SpaceWire interface.
              *
              * @file
              * @author P. LEROY
              *
              * A group of functions to handle SpaceWire transmissions:
              * - configuration of the SpaceWire link
              * - SpaceWire related interruption requests processing
              * - transmission of TeleMetry packets by a dedicated RTEMS task
              * - reception of TeleCommands by a dedicated RTEMS task
              *
              */
             #include "fsw_spacewire.h"
             rtems_name semq_name;
             rtems_id semq_id;
             //*****************
             // waveform headers
             Header_TM_LFR_SCIENCE_CWF_t headerCWF;
             Header_TM_LFR_SCIENCE_SWF_t headerSWF;
             Header_TM_LFR_SCIENCE_ASM_t headerASM;
             //***********
             // RTEMS TASK
             rtems_task spiq_task(rtems_task_argument unused)
             {
                 /** This RTEMS task is awaken by an rtems_event sent by the interruption subroutine of the SpaceWire driver.
                  *
                  * @param unused is the starting argument of the RTEMS task
                  *
                  */
                 rtems_event_set event_out;
                 rtems_status_code status;
                 int linkStatus;
                 BOOT_PRINTF("in SPIQ *** \n")
                 while(true){
                     rtems_event_receive(SPW_LINKERR_EVENT, RTEMS_WAIT, RTEMS_NO_TIMEOUT, &event_out); // wait for an SPW_LINKERR_EVENT
                     PRINTF("in SPIQ *** got SPW_LINKERR_EVENT\n")
                     // [0] SUSPEND RECV AND SEND TASKS
                     status = rtems_task_suspend( Task_id[ TASKID_RECV ] );
                     if ( status != RTEMS_SUCCESSFUL ) {
                         PRINTF("in SPIQ *** ERR suspending RECV Task\n")
                     }
                     status = rtems_task_suspend( Task_id[ TASKID_SEND ] );
                     if ( status != RTEMS_SUCCESSFUL ) {
                         PRINTF("in SPIQ *** ERR suspending SEND Task\n")
                     }
                     // [1] CHECK THE LINK
                     status = ioctl(fdSPW, SPACEWIRE_IOCTRL_GET_LINK_STATUS, &linkStatus);   // get the link status (1)
                     if ( linkStatus != 5) {
                         PRINTF1("in SPIQ *** linkStatus %d, wait...\n", linkStatus)
                         status = rtems_task_wake_after( SY_LFR_DPU_CONNECT_TIMEOUT );        // wait SY_LFR_DPU_CONNECT_TIMEOUT 1000 ms
                     }
                     // [2] RECHECK THE LINK AFTER SY_LFR_DPU_CONNECT_TIMEOUT
                     status = ioctl(fdSPW, SPACEWIRE_IOCTRL_GET_LINK_STATUS, &linkStatus);    // get the link status (2)
                     if ( linkStatus != 5 )  // [2.a] not in run state, reset the link
                     {
                         spacewire_compute_stats_offsets();
                         status = spacewire_reset_link( );
                     }
                     else                    // [2.b] in run state, start the link
                     {
                         status = spacewire_stop_and_start_link( fdSPW ); // start the link
                         if ( status != RTEMS_SUCCESSFUL)
                         {
                             PRINTF1("in SPIQ *** ERR spacewire_stop_and_start_link %d\n", status)
                         }
                     }
                     // [3] COMPLETE RECOVERY ACTION AFTER SY_LFR_DPU_CONNECT_ATTEMPTS
                     if ( status == RTEMS_SUCCESSFUL )   // [3.a] the link is in run state and has been started successfully
                     {
                         status = rtems_task_restart( Task_id[ TASKID_SEND ], 1 );
                         if ( status != RTEMS_SUCCESSFUL ) {
                             PRINTF("in SPIQ *** ERR resuming SEND Task\n")
                         }
                         status = rtems_task_restart( Task_id[ TASKID_RECV ], 1 );
                         if ( status != RTEMS_SUCCESSFUL ) {
                             PRINTF("in SPIQ *** ERR resuming RECV Task\n")
                         }
                     }
                     else                                // [3.b] the link is not in run state, go in STANDBY mode
                     {
                         status = enter_mode_standby();
                         if ( status != RTEMS_SUCCESSFUL ) {
                             PRINTF1("in SPIQ *** ERR enter_standby_mode *** code %d\n", status)
                         }
                         // wake the WTDG task up to wait for the link recovery
                         status =  rtems_event_send ( Task_id[TASKID_WTDG], RTEMS_EVENT_0 );
                         status = rtems_task_suspend( RTEMS_SELF );
                     }
                 }
             }
             rtems_task recv_task( rtems_task_argument unused )
             {
                 /** This RTEMS task is dedicated to the reception of incoming TeleCommands.
                  *
                  * @param unused is the starting argument of the RTEMS task
                  *
                  * The RECV task blocks on a call to the read system call, waiting for incoming SpaceWire data. When unblocked:
                  * 1. It reads the incoming data.
                  * 2. Launches the acceptance procedure.
                  * 3. If the Telecommand is valid, sends it to a dedicated RTEMS message queue.
                  *
                  */
                 int len;
                 ccsdsTelecommandPacket_t currentTC;
                 unsigned char computed_CRC[ 2 ];
                 unsigned char currentTC_LEN_RCV[ 2 ];
                 unsigned char destinationID;
                 unsigned int estimatedPacketLength;
                 unsigned int parserCode;
                 rtems_status_code status;
                 rtems_id queue_recv_id;
                 rtems_id queue_send_id;
                 initLookUpTableForCRC(); // the table is used to compute Cyclic Redundancy Codes
                 status =  get_message_queue_id_recv( &queue_recv_id );
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in RECV *** ERR get_message_queue_id_recv %d\n", status)
                 }
                 status =  get_message_queue_id_send( &queue_send_id );
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in RECV *** ERR get_message_queue_id_send %d\n", status)
                 }
                 BOOT_PRINTF("in RECV *** \n")
                 while(1)
                 {
                     len = read( fdSPW, (char*) &currentTC, CCSDS_TC_PKT_MAX_SIZE ); // the call to read is blocking
                     if (len == -1){ // error during the read call
                         PRINTF1("in RECV *** last read call returned -1, ERRNO %d\n", errno)
                     }
                     else {
                         if ( (len+1) < CCSDS_TC_PKT_MIN_SIZE ) {
                             PRINTF("in RECV *** packet lenght too short\n")
                         }
                         else {
                             estimatedPacketLength = (unsigned int) (len - CCSDS_TC_TM_PACKET_OFFSET - 3); // => -3 is for Prot ID, Reserved and User App bytes
                             currentTC_LEN_RCV[ 0 ] = (unsigned char) (estimatedPacketLength >> 8);
                             currentTC_LEN_RCV[ 1 ] = (unsigned char) (estimatedPacketLength     );
                             // CHECK THE TC
                             parserCode = tc_parser( &currentTC, estimatedPacketLength, computed_CRC ) ;
                             if ( (parserCode == ILLEGAL_APID)       || (parserCode == WRONG_LEN_PKT)
                                  || (parserCode == INCOR_CHECKSUM)  || (parserCode == ILL_TYPE)
                                  || (parserCode == ILL_SUBTYPE)     || (parserCode == WRONG_APP_DATA)
                                  || (parserCode == WRONG_SRC_ID) )
                             { // send TM_LFR_TC_EXE_CORRUPTED
                                 PRINTF1("TC corrupted received, with code: %d\n", parserCode)
                                 if ( !( (currentTC.serviceType==TC_TYPE_TIME) && (currentTC.serviceSubType==TC_SUBTYPE_UPDT_TIME) )
                                      &&
                                      !( (currentTC.serviceType==TC_TYPE_GEN) && (currentTC.serviceSubType==TC_SUBTYPE_UPDT_INFO))
                                      )
                                 {
                                     if ( parserCode == WRONG_SRC_ID )
                                     {
                                         destinationID = SID_TC_GROUND;
                                     }
                                     else
                                     {
                                         destinationID = currentTC.sourceID;
                                     }
                                     send_tm_lfr_tc_exe_corrupted( &currentTC, queue_send_id,
                                                                   computed_CRC, currentTC_LEN_RCV,
                                                                   destinationID );
                                 }
                             }
                             else
                             { // send valid TC to the action launcher
                                 status =  rtems_message_queue_send( queue_recv_id, &currentTC,
                                                                     estimatedPacketLength + CCSDS_TC_TM_PACKET_OFFSET + 3);
                             }
                         }
                     }
                     update_queue_max_count( queue_recv_id, &hk_lfr_q_rv_fifo_size_max );
                 }
             }
             rtems_task send_task( rtems_task_argument argument)
             {
                 /** This RTEMS task is dedicated to the transmission of TeleMetry packets.
                  *
                  * @param unused is the starting argument of the RTEMS task
                  *
                  * The SEND task waits for a message to become available in the dedicated RTEMS queue. When a message arrives:
                  * - if the first byte is equal to CCSDS_DESTINATION_ID, the message is sent as is using the write system call.
                  * - if the first byte is not equal to CCSDS_DESTINATION_ID, the message is handled as a spw_ioctl_pkt_send. After
                  * analyzis, the packet is sent either using the write system call or using the ioctl call SPACEWIRE_IOCTRL_SEND, depending on the
                  * data it contains.
                  *
                  */
                 rtems_status_code status;                // RTEMS status code
                 char incomingData[MSG_QUEUE_SIZE_SEND];  // incoming data buffer
                 ring_node *incomingRingNodePtr;
                 int ring_node_address;
                 char *charPtr;
                 spw_ioctl_pkt_send *spw_ioctl_send;
                 size_t size;                            // size of the incoming TC packet
                 rtems_id queue_send_id;
                 unsigned int sid;
                 unsigned char sidAsUnsignedChar;
                 unsigned char type;
                 incomingRingNodePtr = NULL;
                 ring_node_address = 0;
                 charPtr = (char *) &ring_node_address;
                 sid = 0;
                 sidAsUnsignedChar = 0;
                 init_header_cwf( &headerCWF );
                 init_header_swf( &headerSWF );
                 init_header_asm( &headerASM );
                 status =  get_message_queue_id_send( &queue_send_id );
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in HOUS *** ERR get_message_queue_id_send %d\n", status)
                 }
                 BOOT_PRINTF("in SEND *** \n")
                 while(1)
                 {
                     status = rtems_message_queue_receive( queue_send_id, incomingData, &size,
                                                          RTEMS_WAIT, RTEMS_NO_TIMEOUT );
                     if (status!=RTEMS_SUCCESSFUL)
                     {
                         PRINTF1("in SEND *** (1) ERR = %d\n", status)
                     }
                     else
                     {
                         if ( size == sizeof(ring_node*) )
                         {
                             charPtr[0] = incomingData[0];
                             charPtr[1] = incomingData[1];
                             charPtr[2] = incomingData[2];
                             charPtr[3] = incomingData[3];
                             incomingRingNodePtr = (ring_node*) ring_node_address;
                             sid = incomingRingNodePtr->sid;
                             if ( (sid==SID_NORM_CWF_LONG_F3)
                                  || (sid==SID_BURST_CWF_F2 )
                                  || (sid==SID_SBM1_CWF_F1  )
                                  || (sid==SID_SBM2_CWF_F2  ))
                             {
                                 spw_send_waveform_CWF( incomingRingNodePtr, &headerCWF );
                             }
                             else if ( (sid==SID_NORM_SWF_F0) || (sid== SID_NORM_SWF_F1) || (sid==SID_NORM_SWF_F2) )
                             {
                                 spw_send_waveform_SWF( incomingRingNodePtr, &headerSWF );
                             }
                             else if ( (sid==SID_NORM_CWF_F3) )
                             {
                                 spw_send_waveform_CWF3_light( incomingRingNodePtr, &headerCWF );
                             }
                             else if (sid==SID_NORM_ASM_F0)
                             {
                                 spw_send_asm_f0( incomingRingNodePtr, &headerASM );
                             }
                             else if (sid==SID_NORM_ASM_F1)
                             {
                                 spw_send_asm_f1( incomingRingNodePtr, &headerASM );
                             }
                             else if (sid==SID_NORM_ASM_F2)
                             {
                                 spw_send_asm_f2( incomingRingNodePtr, &headerASM );
                             }
                             else if ( sid==TM_CODE_K_DUMP )
                             {
                                 spw_send_k_dump( incomingRingNodePtr );
                             }
                             else
                             {
                                 PRINTF1("unexpected sid = %d\n", sid);
                             }
                         }
                         else if ( incomingData[0] == CCSDS_DESTINATION_ID ) // the incoming message is a ccsds packet
                         {
                             sidAsUnsignedChar = (unsigned char) incomingData[ PACKET_POS_PA_LFR_SID_PKT ];
                             sid = sidAsUnsignedChar;
                             type = (unsigned char) incomingData[ PACKET_POS_SERVICE_TYPE ];
                             if (type == TM_TYPE_LFR_SCIENCE)    // this is a BP packet, all other types are handled differently
                             // SET THE SEQUENCE_CNT PARAMETER IN CASE OF BP0 OR BP1 PACKETS
                             {
                                 increment_seq_counter_source_id( (unsigned char*) &incomingData[ PACKET_POS_SEQUENCE_CNT ], sid );
                             }
                             status = write( fdSPW, incomingData, size );
                             if (status == -1){
                                 PRINTF2("in SEND *** (2.a) ERRNO = %d, size = %d\n", errno, size)
                             }
                         }
                         else // the incoming message is a spw_ioctl_pkt_send structure
                         {
                             spw_ioctl_send = (spw_ioctl_pkt_send*) incomingData;
                             status = ioctl( fdSPW, SPACEWIRE_IOCTRL_SEND, spw_ioctl_send );
                             if (status == -1){
                                 PRINTF2("in SEND *** (2.b) ERRNO = %d, RTEMS = %d\n", errno, status)
                             }
                         }
                     }
                     update_queue_max_count( queue_send_id, &hk_lfr_q_sd_fifo_size_max );
                 }
             }
             rtems_task wtdg_task( rtems_task_argument argument )
             {
                 rtems_event_set event_out;
                 rtems_status_code status;
                 int linkStatus;
                 BOOT_PRINTF("in WTDG ***\n")
                 while(1)
                 {
                     // wait for an RTEMS_EVENT
                     rtems_event_receive( RTEMS_EVENT_0,
                                         RTEMS_WAIT | RTEMS_EVENT_ANY, RTEMS_NO_TIMEOUT, &event_out);
                     PRINTF("in WTDG *** wait for the link\n")
                     status = ioctl(fdSPW, SPACEWIRE_IOCTRL_GET_LINK_STATUS, &linkStatus);       // get the link status
                     while( linkStatus != 5)                                                     // wait for the link
                     {
                         status = rtems_task_wake_after( 10 );                                   // monitor the link each 100ms
                         status = ioctl(fdSPW, SPACEWIRE_IOCTRL_GET_LINK_STATUS, &linkStatus);   // get the link status
                     }
                     status = spacewire_stop_and_start_link( fdSPW );
                     if (status != RTEMS_SUCCESSFUL)
                     {
                         PRINTF1("in WTDG *** ERR link not started %d\n", status)
                     }
                     else
                     {
                         PRINTF("in WTDG *** OK  link started\n")
                     }
                     // restart the SPIQ task
                     status = rtems_task_restart( Task_id[TASKID_SPIQ], 1 );
                     if ( status != RTEMS_SUCCESSFUL ) {
                         PRINTF("in SPIQ *** ERR restarting SPIQ Task\n")
                     }
                     // restart RECV and SEND
                     status = rtems_task_restart( Task_id[ TASKID_SEND ], 1 );
                     if ( status != RTEMS_SUCCESSFUL ) {
                         PRINTF("in SPIQ *** ERR restarting SEND Task\n")
                     }
                     status = rtems_task_restart( Task_id[ TASKID_RECV ], 1 );
                     if ( status != RTEMS_SUCCESSFUL ) {
                         PRINTF("in SPIQ *** ERR restarting RECV Task\n")
                     }
                 }
             }
             //****************
             // OTHER FUNCTIONS
             int spacewire_open_link( void )  // by default, the driver resets the core: [SPW_CTRL_WRITE(pDev, SPW_CTRL_RESET);]
             {
                 /** This function opens the SpaceWire link.
                  *
                  * @return a valid file descriptor in case of success, -1 in case of a failure
                  *
                  */
                 rtems_status_code status;
                 fdSPW = open(GRSPW_DEVICE_NAME, O_RDWR); // open the device. the open call resets the hardware
                 if ( fdSPW < 0 ) {
                     PRINTF1("ERR *** in configure_spw_link *** error opening "GRSPW_DEVICE_NAME" with ERR %d\n", errno)
                 }
                 else
                 {
                     status = RTEMS_SUCCESSFUL;
                 }
                 return status;
             }
             int spacewire_start_link( int fd )
             {
                 rtems_status_code status;
                 status = ioctl( fd, SPACEWIRE_IOCTRL_START, -1); // returns successfuly if the link is started
                                                                     // -1 default hardcoded driver timeout
                 return status;
             }
             int spacewire_stop_and_start_link( int fd )
             {
                 rtems_status_code status;
                 status = ioctl( fd, SPACEWIRE_IOCTRL_STOP);      // start fails if link pDev->running != 0
                 status = ioctl( fd, SPACEWIRE_IOCTRL_START, -1); // returns successfuly if the link is started
                                                                     // -1 default hardcoded driver timeout
                 return status;
             }
             int spacewire_configure_link( int fd )
             {
                 /** This function configures the SpaceWire link.
                  *
                  * @return GR-RTEMS-DRIVER directive status codes:
                  * - 22  EINVAL - Null pointer or an out of range value was given as the argument.
                  * - 16  EBUSY - Only used for SEND. Returned when no descriptors are avialble in non-blocking mode.
                  * - 88  ENOSYS - Returned for SET_DESTKEY if RMAP command handler is not available or if a non-implemented call is used.
                  * - 116 ETIMEDOUT - REturned for SET_PACKET_SIZE and START if the link could not be brought up.
                  * - 12  ENOMEM - Returned for SET_PACKETSIZE if it was unable to allocate the new buffers.
                  * - 5   EIO - Error when writing to grswp hardware registers.
                  * - 2   ENOENT - No such file or directory
                  */
                 rtems_status_code status;
                 spacewire_set_NP(1, REGS_ADDR_GRSPW); // [N]o [P]ort force
                 spacewire_set_RE(1, REGS_ADDR_GRSPW); // [R]MAP [E]nable, the dedicated call seems to  break the no port force configuration
                 status = ioctl(fd, SPACEWIRE_IOCTRL_SET_RXBLOCK, 1);              // sets the blocking mode for reception
                 if (status!=RTEMS_SUCCESSFUL) {
                     PRINTF("in SPIQ *** Error SPACEWIRE_IOCTRL_SET_RXBLOCK\n")
                 }
                 //
                 status = ioctl(fd, SPACEWIRE_IOCTRL_SET_EVENT_ID, Task_id[TASKID_SPIQ]); // sets the task ID to which an event is sent when a
                 if (status!=RTEMS_SUCCESSFUL) {
                     PRINTF("in SPIQ *** Error SPACEWIRE_IOCTRL_SET_EVENT_ID\n")          // link-error interrupt occurs
                 }
                 //
                 status = ioctl(fd, SPACEWIRE_IOCTRL_SET_DISABLE_ERR, 0);          // automatic link-disabling due to link-error interrupts
                 if (status!=RTEMS_SUCCESSFUL) {
                     PRINTF("in SPIQ *** Error SPACEWIRE_IOCTRL_SET_DISABLE_ERR\n")
                 }
                 //
                 status = ioctl(fd, SPACEWIRE_IOCTRL_SET_LINK_ERR_IRQ, 1);         // sets the link-error interrupt bit
                 if (status!=RTEMS_SUCCESSFUL) {
                     PRINTF("in SPIQ *** Error SPACEWIRE_IOCTRL_SET_LINK_ERR_IRQ\n")
                 }
                 //
                 status = ioctl(fd, SPACEWIRE_IOCTRL_SET_TXBLOCK, 1);              // transmission blocks
                 if (status!=RTEMS_SUCCESSFUL) {
                     PRINTF("in SPIQ *** Error SPACEWIRE_IOCTRL_SET_TXBLOCK\n")
                 }
                 //
                 status = ioctl(fd, SPACEWIRE_IOCTRL_SET_TXBLOCK_ON_FULL, 1);      // transmission blocks when no transmission descriptor is available
                 if (status!=RTEMS_SUCCESSFUL) {
                     PRINTF("in SPIQ *** Error SPACEWIRE_IOCTRL_SET_TXBLOCK_ON_FULL\n")
                 }
                 //
                 status = ioctl(fd, SPACEWIRE_IOCTRL_SET_TCODE_CTRL, 0x0909); // [Time Rx : Time Tx : Link error : Tick-out IRQ]
                 if (status!=RTEMS_SUCCESSFUL) {
                     PRINTF("in SPIQ *** Error SPACEWIRE_IOCTRL_SET_TCODE_CTRL,\n")
                 }
                 return status;
             }
             int spacewire_reset_link( void )
             {
                 /** This function is executed by the SPIQ rtems_task wehn it has been awaken by an interruption raised by the SpaceWire driver.
                  *
                  * @return RTEMS directive status code:
                  * - RTEMS_UNSATISFIED is returned is the link is not in the running state after 10 s.
                  * - RTEMS_SUCCESSFUL is returned if the link is up before the timeout.
                  *
                  */
                 rtems_status_code status_spw;
                 rtems_status_code status;
                 int i;
                 for ( i=0; i<SY_LFR_DPU_CONNECT_ATTEMPT; i++ )
                 {
                     PRINTF1("in spacewire_reset_link *** link recovery, try %d\n", i);
                     // CLOSING THE DRIVER AT THIS POINT WILL MAKE THE SEND TASK BLOCK THE SYSTEM
                     status = rtems_task_wake_after( SY_LFR_DPU_CONNECT_TIMEOUT );        // wait SY_LFR_DPU_CONNECT_TIMEOUT 1000 ms
                     status_spw = spacewire_stop_and_start_link( fdSPW );
                     if (  status_spw != RTEMS_SUCCESSFUL )
                     {
                         PRINTF1("in spacewire_reset_link *** ERR spacewire_start_link code %d\n",  status_spw)
                     }
                     if ( status_spw == RTEMS_SUCCESSFUL)
                     {
                         break;
                     }
                 }
                 return status_spw;
             }
             void spacewire_set_NP( unsigned char val, unsigned int regAddr ) // [N]o [P]ort force
             {
                 /** This function sets the [N]o [P]ort force bit of the GRSPW control register.
                  *
                  * @param val is the value, 0 or 1, used to set the value of the NP bit.
                  * @param regAddr is the address of the GRSPW control register.
                  *
                  * NP is the bit 20 of the GRSPW control register.
                  *
                  */
                 unsigned int *spwptr = (unsigned int*) regAddr;
                 if (val == 1) {
                     *spwptr = *spwptr | 0x00100000; // [NP] set the No port force bit
                 }
                 if (val== 0) {
                     *spwptr = *spwptr & 0xffdfffff;
                 }
             }
             void spacewire_set_RE( unsigned char val, unsigned int regAddr ) // [R]MAP [E]nable
             {
                 /** This function sets the [R]MAP [E]nable bit of the GRSPW control register.
                  *
                  * @param val is the value, 0 or 1, used to set the value of the RE bit.
                  * @param regAddr is the address of the GRSPW control register.
                  *
                  * RE is the bit 16 of the GRSPW control register.
                  *
                  */
                 unsigned int *spwptr = (unsigned int*) regAddr;
                 if (val == 1)
                 {
                     *spwptr = *spwptr | 0x00010000; // [RE] set the RMAP Enable bit
                 }
                 if (val== 0)
                 {
                     *spwptr = *spwptr & 0xfffdffff;
                 }
             }
             void spacewire_compute_stats_offsets( void )
             {
                 /** This function computes the SpaceWire statistics offsets in case of a SpaceWire related interruption raising.
                  *
                  * The offsets keep a record of the statistics in case of a reset of the statistics. They are added to the current statistics
                  * to keep the counters consistent even after a reset of the SpaceWire driver (the counter are set to zero by the driver when it
                  * during the open systel call).
                  *
                  */
                 spw_stats spacewire_stats_grspw;
                 rtems_status_code status;
                 status = ioctl( fdSPW, SPACEWIRE_IOCTRL_GET_STATISTICS, &spacewire_stats_grspw );
                 spacewire_stats_backup.packets_received = spacewire_stats_grspw.packets_received
                         + spacewire_stats.packets_received;
                 spacewire_stats_backup.packets_sent = spacewire_stats_grspw.packets_sent
                         + spacewire_stats.packets_sent;
                 spacewire_stats_backup.parity_err = spacewire_stats_grspw.parity_err
                         + spacewire_stats.parity_err;
                 spacewire_stats_backup.disconnect_err = spacewire_stats_grspw.disconnect_err
                         + spacewire_stats.disconnect_err;
                 spacewire_stats_backup.escape_err = spacewire_stats_grspw.escape_err
                         + spacewire_stats.escape_err;
                 spacewire_stats_backup.credit_err = spacewire_stats_grspw.credit_err
                         + spacewire_stats.credit_err;
                 spacewire_stats_backup.write_sync_err = spacewire_stats_grspw.write_sync_err
                         + spacewire_stats.write_sync_err;
                 spacewire_stats_backup.rx_rmap_header_crc_err = spacewire_stats_grspw.rx_rmap_header_crc_err
                         + spacewire_stats.rx_rmap_header_crc_err;
                 spacewire_stats_backup.rx_rmap_data_crc_err = spacewire_stats_grspw.rx_rmap_data_crc_err
                         + spacewire_stats.rx_rmap_data_crc_err;
                 spacewire_stats_backup.early_ep = spacewire_stats_grspw.early_ep
                         + spacewire_stats.early_ep;
                 spacewire_stats_backup.invalid_address = spacewire_stats_grspw.invalid_address
                         + spacewire_stats.invalid_address;
                 spacewire_stats_backup.rx_eep_err = spacewire_stats_grspw.rx_eep_err
                         + spacewire_stats.rx_eep_err;
                 spacewire_stats_backup.rx_truncated = spacewire_stats_grspw.rx_truncated
                         + spacewire_stats.rx_truncated;
             }
             void spacewire_update_statistics( void )
             {
                 rtems_status_code status;
                 spw_stats spacewire_stats_grspw;
                 status = ioctl( fdSPW, SPACEWIRE_IOCTRL_GET_STATISTICS, &spacewire_stats_grspw );
                 spacewire_stats.packets_received = spacewire_stats_backup.packets_received
                         + spacewire_stats_grspw.packets_received;
                 spacewire_stats.packets_sent = spacewire_stats_backup.packets_sent
                         + spacewire_stats_grspw.packets_sent;
                 spacewire_stats.parity_err = spacewire_stats_backup.parity_err
                         + spacewire_stats_grspw.parity_err;
                 spacewire_stats.disconnect_err = spacewire_stats_backup.disconnect_err
                         + spacewire_stats_grspw.disconnect_err;
                 spacewire_stats.escape_err = spacewire_stats_backup.escape_err
                         + spacewire_stats_grspw.escape_err;
                 spacewire_stats.credit_err = spacewire_stats_backup.credit_err
                         + spacewire_stats_grspw.credit_err;
                 spacewire_stats.write_sync_err = spacewire_stats_backup.write_sync_err
                         + spacewire_stats_grspw.write_sync_err;
                 spacewire_stats.rx_rmap_header_crc_err = spacewire_stats_backup.rx_rmap_header_crc_err
                         + spacewire_stats_grspw.rx_rmap_header_crc_err;
                 spacewire_stats.rx_rmap_data_crc_err = spacewire_stats_backup.rx_rmap_data_crc_err
                         + spacewire_stats_grspw.rx_rmap_data_crc_err;
                 spacewire_stats.early_ep = spacewire_stats_backup.early_ep
                         + spacewire_stats_grspw.early_ep;
                 spacewire_stats.invalid_address = spacewire_stats_backup.invalid_address
                         + spacewire_stats_grspw.invalid_address;
                 spacewire_stats.rx_eep_err = spacewire_stats_backup.rx_eep_err
                         +  spacewire_stats_grspw.rx_eep_err;
                 spacewire_stats.rx_truncated = spacewire_stats_backup.rx_truncated
                         + spacewire_stats_grspw.rx_truncated;
                 //spacewire_stats.tx_link_err;
                 //****************************
                 // DPU_SPACEWIRE_IF_STATISTICS
                 housekeeping_packet.hk_lfr_dpu_spw_pkt_rcv_cnt[0] = (unsigned char) (spacewire_stats.packets_received >> 8);
                 housekeeping_packet.hk_lfr_dpu_spw_pkt_rcv_cnt[1] = (unsigned char) (spacewire_stats.packets_received);
                 housekeeping_packet.hk_lfr_dpu_spw_pkt_sent_cnt[0] = (unsigned char) (spacewire_stats.packets_sent >> 8);
                 housekeeping_packet.hk_lfr_dpu_spw_pkt_sent_cnt[1] = (unsigned char) (spacewire_stats.packets_sent);
                 //housekeeping_packet.hk_lfr_dpu_spw_tick_out_cnt;
                 //housekeeping_packet.hk_lfr_dpu_spw_last_timc;
                 //******************************************
                 // ERROR COUNTERS / SPACEWIRE / LOW SEVERITY
                 housekeeping_packet.hk_lfr_dpu_spw_parity = (unsigned char) spacewire_stats.parity_err;
                 housekeeping_packet.hk_lfr_dpu_spw_disconnect = (unsigned char) spacewire_stats.disconnect_err;
                 housekeeping_packet.hk_lfr_dpu_spw_escape = (unsigned char) spacewire_stats.escape_err;
                 housekeeping_packet.hk_lfr_dpu_spw_credit = (unsigned char) spacewire_stats.credit_err;
                 housekeeping_packet.hk_lfr_dpu_spw_write_sync = (unsigned char) spacewire_stats.write_sync_err;
                 //*********************************************
                 // ERROR COUNTERS / SPACEWIRE / MEDIUM SEVERITY
                 housekeeping_packet.hk_lfr_dpu_spw_early_eop = (unsigned char) spacewire_stats.early_ep;
                 housekeeping_packet.hk_lfr_dpu_spw_invalid_addr = (unsigned char) spacewire_stats.invalid_address;
                 housekeeping_packet.hk_lfr_dpu_spw_eep = (unsigned char) spacewire_stats.rx_eep_err;
                 housekeeping_packet.hk_lfr_dpu_spw_rx_too_big = (unsigned char) spacewire_stats.rx_truncated;
             }
             void timecode_irq_handler( void *pDev, void *regs, int minor, unsigned int tc )
             {
                 // a valid timecode has been received, write it in the HK report
                 unsigned int *grspwPtr;
                 unsigned char timecodeCtr;
                 unsigned char updateTimeCtr;
                 grspwPtr = (unsigned int *) (REGS_ADDR_GRSPW + APB_OFFSET_GRSPW_TIME_REGISTER);
                 housekeeping_packet.hk_lfr_dpu_spw_last_timc = (unsigned char) (grspwPtr[0] & 0xff);   // [1111 1111]
                 timecodeCtr = (unsigned char) (grspwPtr[0] & 0x3f);             // [0011 1111]
                 updateTimeCtr = time_management_regs->coarse_time_load & 0x3f;  // [0011 1111]
                 // update the number of valid timecodes that have been received
                 if (housekeeping_packet.hk_lfr_dpu_spw_tick_out_cnt == 255)
                 {
                     housekeeping_packet.hk_lfr_dpu_spw_tick_out_cnt = 0;
                 }
                 else
                 {
                     housekeeping_packet.hk_lfr_dpu_spw_tick_out_cnt = housekeeping_packet.hk_lfr_dpu_spw_tick_out_cnt + 1;
                 }
                 // check the value of the timecode with respect to the last TC_LFR_UPDATE_TIME => SSS-CP-FS-370
                 if (timecodeCtr != updateTimeCtr)
                 {
                     if (housekeeping_packet.hk_lfr_time_timecode_ctr == 255)
                     {
                         housekeeping_packet.hk_lfr_time_timecode_ctr = 0;
                     }
                     else
                     {
                         housekeeping_packet.hk_lfr_time_timecode_ctr = housekeeping_packet.hk_lfr_time_timecode_ctr + 1;
                     }
                 }
             }
-            rtems_timer_service_routine user_routine( rtems_id timer_id, void *user_data )
-                int linkStatus;
-                rtems_status_code status;
-                status = ioctl(fdSPW, SPACEWIRE_IOCTRL_GET_LINK_STATUS, &linkStatus);   // get the link status
-                if ( linkStatus == 5) {
-                    PRINTF("in spacewire_reset_link *** link is running\n")
-                    status = RTEMS_SUCCESSFUL;
             void init_header_cwf( Header_TM_LFR_SCIENCE_CWF_t *header )
             {
                 header->targetLogicalAddress    = CCSDS_DESTINATION_ID;
                 header->protocolIdentifier      = CCSDS_PROTOCOLE_ID;
                 header->reserved                = DEFAULT_RESERVED;
                 header->userApplication         = CCSDS_USER_APP;
                 header->packetSequenceControl[0]= TM_PACKET_SEQ_CTRL_STANDALONE;
                 header->packetSequenceControl[1]= TM_PACKET_SEQ_CNT_DEFAULT;
                 header->packetLength[0] = 0x00;
                 header->packetLength[1] = 0x00;
                 // DATA FIELD HEADER
                 header->spare1_pusVersion_spare2    = DEFAULT_SPARE1_PUSVERSION_SPARE2;
                 header->serviceType     = TM_TYPE_LFR_SCIENCE; // service type
                 header->serviceSubType  = TM_SUBTYPE_LFR_SCIENCE_6; // service subtype
                 header->destinationID   = TM_DESTINATION_ID_GROUND;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 // AUXILIARY DATA HEADER
                 header->sid = 0x00;
                 header->hkBIA = DEFAULT_HKBIA;
                 header->blkNr[0] = 0x00;
                 header->blkNr[1] = 0x00;
             }
             void init_header_swf( Header_TM_LFR_SCIENCE_SWF_t *header )
             {
                 header->targetLogicalAddress        = CCSDS_DESTINATION_ID;
                 header->protocolIdentifier          = CCSDS_PROTOCOLE_ID;
                 header->reserved        = DEFAULT_RESERVED;
                 header->userApplication = CCSDS_USER_APP;
                 header->packetID[0] = (unsigned char) (APID_TM_SCIENCE_NORMAL_BURST >> 8);
                 header->packetID[1] = (unsigned char) (APID_TM_SCIENCE_NORMAL_BURST);
                 header->packetSequenceControl[0]    = TM_PACKET_SEQ_CTRL_STANDALONE;
                 header->packetSequenceControl[1]    = TM_PACKET_SEQ_CNT_DEFAULT;
                 header->packetLength[0] = (unsigned char) (TM_LEN_SCI_CWF_336 >> 8);
                 header->packetLength[1] = (unsigned char) (TM_LEN_SCI_CWF_336     );
                 // DATA FIELD HEADER
                 header->spare1_pusVersion_spare2    = DEFAULT_SPARE1_PUSVERSION_SPARE2;
                 header->serviceType     = TM_TYPE_LFR_SCIENCE; // service type
                 header->serviceSubType  = TM_SUBTYPE_LFR_SCIENCE_6; // service subtype
                 header->destinationID   = TM_DESTINATION_ID_GROUND;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 // AUXILIARY DATA HEADER
                 header->sid     = 0x00;
                 header->hkBIA   = DEFAULT_HKBIA;
                 header->pktCnt  = DEFAULT_PKTCNT;  // PKT_CNT
                 header->pktNr   = 0x00;
                 header->blkNr[0]        = (unsigned char) (BLK_NR_CWF >> 8);
                 header->blkNr[1]        = (unsigned char) (BLK_NR_CWF     );
             }
             void init_header_asm( Header_TM_LFR_SCIENCE_ASM_t *header )
             {
                 header->targetLogicalAddress        = CCSDS_DESTINATION_ID;
                 header->protocolIdentifier          = CCSDS_PROTOCOLE_ID;
                 header->reserved        = DEFAULT_RESERVED;
                 header->userApplication = CCSDS_USER_APP;
                 header->packetID[0] = (unsigned char) (APID_TM_SCIENCE_NORMAL_BURST >> 8);
                 header->packetID[1] = (unsigned char) (APID_TM_SCIENCE_NORMAL_BURST);
                 header->packetSequenceControl[0]    = TM_PACKET_SEQ_CTRL_STANDALONE;
                 header->packetSequenceControl[1]    = TM_PACKET_SEQ_CNT_DEFAULT;
                 header->packetLength[0] = 0x00;
                 header->packetLength[1] = 0x00;
                 // DATA FIELD HEADER
                 header->spare1_pusVersion_spare2    = DEFAULT_SPARE1_PUSVERSION_SPARE2;
                 header->serviceType     = TM_TYPE_LFR_SCIENCE; // service type
                 header->serviceSubType  = TM_SUBTYPE_LFR_SCIENCE_3; // service subtype
                 header->destinationID   = TM_DESTINATION_ID_GROUND;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 header->time[0] = 0x00;
                 // AUXILIARY DATA HEADER
                 header->sid     = 0x00;
                 header->biaStatusInfo = 0x00;
                 header->pa_lfr_pkt_cnt_asm = 0x00;
                 header->pa_lfr_pkt_nr_asm = 0x00;
                 header->pa_lfr_asm_blk_nr[0] = 0x00;
                 header->pa_lfr_asm_blk_nr[1] = 0x00;
             }
             int spw_send_waveform_CWF( ring_node *ring_node_to_send,
                                   Header_TM_LFR_SCIENCE_CWF_t *header )
             {
                 /** This function sends CWF CCSDS packets (F2, F1 or F0).
                  *
                  * @param waveform points to the buffer containing the data that will be send.
                  * @param sid is the source identifier of the data that will be sent.
                  * @param headerCWF points to a table of headers that have been prepared for the data transmission.
                  * @param queue_id is the id of the rtems queue to which spw_ioctl_pkt_send structures will be send. The structures
                  * contain information to setup the transmission of the data packets.
                  *
                  * One group of 2048 samples is sent as 7 consecutive packets, 6 packets containing 340 blocks and 8 packets containing 8 blocks.
                  *
                  */
                 unsigned int i;
                 int ret;
                 unsigned int coarseTime;
                 unsigned int fineTime;
                 rtems_status_code status;
                 spw_ioctl_pkt_send spw_ioctl_send_CWF;
                 int *dataPtr;
                 unsigned char sid;
                 spw_ioctl_send_CWF.hlen = HEADER_LENGTH_TM_LFR_SCIENCE_CWF;
                 spw_ioctl_send_CWF.options = 0;
                 ret = LFR_DEFAULT;
                 sid = (unsigned char) ring_node_to_send->sid;
                 coarseTime  = ring_node_to_send->coarseTime;
                 fineTime    = ring_node_to_send->fineTime;
                 dataPtr     = (int*) ring_node_to_send->buffer_address;
                 header->packetLength[0] = (unsigned char) (TM_LEN_SCI_CWF_336 >> 8);
                 header->packetLength[1] = (unsigned char) (TM_LEN_SCI_CWF_336     );
                 header->hkBIA = pa_bia_status_info;
                 header->sy_lfr_common_parameters = parameter_dump_packet.sy_lfr_common_parameters;
                 header->blkNr[0] = (unsigned char) (BLK_NR_CWF >> 8);
                 header->blkNr[1] = (unsigned char) (BLK_NR_CWF     );
                 for (i=0; i<NB_PACKETS_PER_GROUP_OF_CWF; i++) // send waveform
                 {
                     spw_ioctl_send_CWF.data = (char*) &dataPtr[ (i * BLK_NR_CWF * NB_WORDS_SWF_BLK) ];
                     spw_ioctl_send_CWF.hdr  = (char*) header;
                     // BUILD THE DATA
                     spw_ioctl_send_CWF.dlen = BLK_NR_CWF * NB_BYTES_SWF_BLK;
                     // SET PACKET SEQUENCE CONTROL
                     increment_seq_counter_source_id( header->packetSequenceControl, sid );
                     // SET SID
                     header->sid = sid;
                     // SET PACKET TIME
                     compute_acquisition_time( coarseTime, fineTime, sid, i, header->acquisitionTime);
                     //
                     header->time[0] = header->acquisitionTime[0];
                     header->time[1] = header->acquisitionTime[1];
                     header->time[2] = header->acquisitionTime[2];
                     header->time[3] = header->acquisitionTime[3];
                     header->time[4] = header->acquisitionTime[4];
                     header->time[5] = header->acquisitionTime[5];
                     // SET PACKET ID
                     if ( (sid == SID_SBM1_CWF_F1) || (sid == SID_SBM2_CWF_F2) )
                     {
                         header->packetID[0] = (unsigned char) (APID_TM_SCIENCE_SBM1_SBM2 >> 8);
                         header->packetID[1] = (unsigned char) (APID_TM_SCIENCE_SBM1_SBM2);
                     }
                     else
                     {
                         header->packetID[0] = (unsigned char) (APID_TM_SCIENCE_NORMAL_BURST >> 8);
                         header->packetID[1] = (unsigned char) (APID_TM_SCIENCE_NORMAL_BURST);
                     }
                     status = ioctl( fdSPW, SPACEWIRE_IOCTRL_SEND, &spw_ioctl_send_CWF );
                     if (status != RTEMS_SUCCESSFUL) {
                         ret = LFR_DEFAULT;
                     }
                 }
                 return ret;
             }
             int spw_send_waveform_SWF( ring_node *ring_node_to_send,
                                    Header_TM_LFR_SCIENCE_SWF_t *header )
             {
                 /** This function sends SWF CCSDS packets (F2, F1 or F0).
                  *
                  * @param waveform points to the buffer containing the data that will be send.
                  * @param sid is the source identifier of the data that will be sent.
                  * @param headerSWF points to a table of headers that have been prepared for the data transmission.
                  * @param queue_id is the id of the rtems queue to which spw_ioctl_pkt_send structures will be send. The structures
                  * contain information to setup the transmission of the data packets.
                  *
                  * One group of 2048 samples is sent as 7 consecutive packets, 6 packets containing 340 blocks and 8 packets containing 8 blocks.
                  *
                  */
                 unsigned int i;
                 int ret;
                 unsigned int coarseTime;
                 unsigned int fineTime;
                 rtems_status_code status;
                 spw_ioctl_pkt_send spw_ioctl_send_SWF;
                 int *dataPtr;
                 unsigned char sid;
                 spw_ioctl_send_SWF.hlen = HEADER_LENGTH_TM_LFR_SCIENCE_SWF;
                 spw_ioctl_send_SWF.options = 0;
                 ret = LFR_DEFAULT;
                 coarseTime  = ring_node_to_send->coarseTime;
                 fineTime    = ring_node_to_send->fineTime;
                 dataPtr     = (int*) ring_node_to_send->buffer_address;
                 sid = ring_node_to_send->sid;
                 header->hkBIA = pa_bia_status_info;
                 header->sy_lfr_common_parameters = parameter_dump_packet.sy_lfr_common_parameters;
                 for (i=0; i<7; i++) // send waveform
                 {
                     spw_ioctl_send_SWF.data = (char*) &dataPtr[ (i * BLK_NR_304 * NB_WORDS_SWF_BLK) ];
                     spw_ioctl_send_SWF.hdr = (char*) header;
                     // SET PACKET SEQUENCE CONTROL
                     increment_seq_counter_source_id( header->packetSequenceControl, sid );
                     // SET PACKET LENGTH AND BLKNR
                     if (i == 6)
                     {
                         spw_ioctl_send_SWF.dlen = BLK_NR_224 * NB_BYTES_SWF_BLK;
                         header->packetLength[0] = (unsigned char) (TM_LEN_SCI_SWF_224 >> 8);
                         header->packetLength[1] = (unsigned char) (TM_LEN_SCI_SWF_224     );
                         header->blkNr[0] = (unsigned char) (BLK_NR_224 >> 8);
                         header->blkNr[1] = (unsigned char) (BLK_NR_224     );
                     }
                     else
                     {
                         spw_ioctl_send_SWF.dlen = BLK_NR_304 * NB_BYTES_SWF_BLK;
                         header->packetLength[0] = (unsigned char) (TM_LEN_SCI_SWF_304 >> 8);
                         header->packetLength[1] = (unsigned char) (TM_LEN_SCI_SWF_304     );
                         header->blkNr[0] = (unsigned char) (BLK_NR_304 >> 8);
                         header->blkNr[1] = (unsigned char) (BLK_NR_304     );
                     }
                     // SET PACKET TIME
                     compute_acquisition_time( coarseTime, fineTime, sid, i, header->acquisitionTime );
                     //
                     header->time[0] = header->acquisitionTime[0];
                     header->time[1] = header->acquisitionTime[1];
                     header->time[2] = header->acquisitionTime[2];
                     header->time[3] = header->acquisitionTime[3];
                     header->time[4] = header->acquisitionTime[4];
                     header->time[5] = header->acquisitionTime[5];
                     // SET SID
                     header->sid = sid;
                     // SET PKTNR
                     header->pktNr = i+1;    // PKT_NR
                     // SEND PACKET
                     status = ioctl( fdSPW, SPACEWIRE_IOCTRL_SEND, &spw_ioctl_send_SWF );
                     if (status != RTEMS_SUCCESSFUL) {
                         ret = LFR_DEFAULT;
                     }
                 }
                 return ret;
             }
             int spw_send_waveform_CWF3_light( ring_node *ring_node_to_send,
                                               Header_TM_LFR_SCIENCE_CWF_t *header )
             {
                 /** This function sends CWF_F3 CCSDS packets without the b1, b2 and b3 data.
                  *
                  * @param waveform points to the buffer containing the data that will be send.
                  * @param headerCWF points to a table of headers that have been prepared for the data transmission.
                  * @param queue_id is the id of the rtems queue to which spw_ioctl_pkt_send structures will be send. The structures
                  * contain information to setup the transmission of the data packets.
                  *
                  * By default, CWF_F3 packet are send without the b1, b2 and b3 data. This function rebuilds a data buffer
                  * from the incoming data and sends it in 7 packets, 6 containing 340 blocks and 1 one containing 8 blocks.
                  *
                  */
                 unsigned int i;
                 int ret;
                 unsigned int coarseTime;
                 unsigned int fineTime;
                 rtems_status_code status;
                 spw_ioctl_pkt_send spw_ioctl_send_CWF;
                 char *dataPtr;
                 unsigned char sid;
                 spw_ioctl_send_CWF.hlen = HEADER_LENGTH_TM_LFR_SCIENCE_CWF;
                 spw_ioctl_send_CWF.options = 0;
                 ret = LFR_DEFAULT;
                 sid = ring_node_to_send->sid;
                 coarseTime  = ring_node_to_send->coarseTime;
                 fineTime    = ring_node_to_send->fineTime;
                 dataPtr     = (char*) ring_node_to_send->buffer_address;
                 header->packetLength[0] = (unsigned char) (TM_LEN_SCI_CWF_672 >> 8);
                 header->packetLength[1] = (unsigned char) (TM_LEN_SCI_CWF_672     );
                 header->hkBIA = pa_bia_status_info;
                 header->sy_lfr_common_parameters = parameter_dump_packet.sy_lfr_common_parameters;
                 header->blkNr[0] = (unsigned char) (BLK_NR_CWF_SHORT_F3 >> 8);
                 header->blkNr[1] = (unsigned char) (BLK_NR_CWF_SHORT_F3     );
                 //*********************
                 // SEND CWF3_light DATA
                 for (i=0; i<NB_PACKETS_PER_GROUP_OF_CWF_LIGHT; i++) // send waveform
                 {
                     spw_ioctl_send_CWF.data = (char*) &dataPtr[ (i * BLK_NR_CWF_SHORT_F3 * NB_BYTES_CWF3_LIGHT_BLK) ];
                     spw_ioctl_send_CWF.hdr = (char*) header;
                     // BUILD THE DATA
                     spw_ioctl_send_CWF.dlen = BLK_NR_CWF_SHORT_F3 * NB_BYTES_CWF3_LIGHT_BLK;
                     // SET PACKET SEQUENCE COUNTER
                     increment_seq_counter_source_id( header->packetSequenceControl, sid );
                     // SET SID
                     header->sid = sid;
                     // SET PACKET TIME
                     compute_acquisition_time( coarseTime, fineTime, SID_NORM_CWF_F3, i, header->acquisitionTime );
                     //
                     header->time[0] = header->acquisitionTime[0];
                     header->time[1] = header->acquisitionTime[1];
                     header->time[2] = header->acquisitionTime[2];
                     header->time[3] = header->acquisitionTime[3];
                     header->time[4] = header->acquisitionTime[4];
                     header->time[5] = header->acquisitionTime[5];
                     // SET PACKET ID
                     header->packetID[0] = (unsigned char) (APID_TM_SCIENCE_NORMAL_BURST >> 8);
                     header->packetID[1] = (unsigned char) (APID_TM_SCIENCE_NORMAL_BURST);
                     // SEND PACKET
                     status = ioctl( fdSPW, SPACEWIRE_IOCTRL_SEND, &spw_ioctl_send_CWF );
                     if (status != RTEMS_SUCCESSFUL) {
                         ret = LFR_DEFAULT;
                     }
                 }
                 return ret;
             }
             void spw_send_asm_f0( ring_node *ring_node_to_send,
                                Header_TM_LFR_SCIENCE_ASM_t *header )
             {
                 unsigned int i;
                 unsigned int length = 0;
                 rtems_status_code status;
                 unsigned int sid;
                 float *spectral_matrix;
                 int coarseTime;
                 int fineTime;
                 spw_ioctl_pkt_send spw_ioctl_send_ASM;
                 sid = ring_node_to_send->sid;
                 spectral_matrix = (float*) ring_node_to_send->buffer_address;
                 coarseTime = ring_node_to_send->coarseTime;
                 fineTime = ring_node_to_send->fineTime;
                 header->biaStatusInfo = pa_bia_status_info;
                 header->sy_lfr_common_parameters = parameter_dump_packet.sy_lfr_common_parameters;
                 for (i=0; i<3; i++)
                 {
                     if ((i==0) || (i==1))
                     {
                         spw_ioctl_send_ASM.dlen = DLEN_ASM_F0_PKT_1;
                         spw_ioctl_send_ASM.data = (char *) &spectral_matrix[
                                 ( (ASM_F0_INDICE_START + (i*NB_BINS_PER_PKT_ASM_F0_1) ) * NB_VALUES_PER_SM )
                                 ];
                         length = PACKET_LENGTH_TM_LFR_SCIENCE_ASM_F0_1;
                         header->serviceSubType = TM_SUBTYPE_LFR_SCIENCE_6;
                         header->pa_lfr_asm_blk_nr[0] = (unsigned char)  ( (NB_BINS_PER_PKT_ASM_F0_1) >> 8 ); // BLK_NR MSB
                         header->pa_lfr_asm_blk_nr[1] = (unsigned char)    (NB_BINS_PER_PKT_ASM_F0_1);        // BLK_NR LSB
                     }
                     else
                     {
                         spw_ioctl_send_ASM.dlen = DLEN_ASM_F0_PKT_2;
                         spw_ioctl_send_ASM.data = (char*) &spectral_matrix[
                                 ( (ASM_F0_INDICE_START + (i*NB_BINS_PER_PKT_ASM_F0_1) ) * NB_VALUES_PER_SM )
                                 ];
                         length = PACKET_LENGTH_TM_LFR_SCIENCE_ASM_F0_2;
                         header->serviceSubType = TM_SUBTYPE_LFR_SCIENCE_6;
                         header->pa_lfr_asm_blk_nr[0] = (unsigned char)  ( (NB_BINS_PER_PKT_ASM_F0_2) >> 8 ); // BLK_NR MSB
                         header->pa_lfr_asm_blk_nr[1] = (unsigned char)    (NB_BINS_PER_PKT_ASM_F0_2);        // BLK_NR LSB
                     }
                     spw_ioctl_send_ASM.hlen = HEADER_LENGTH_TM_LFR_SCIENCE_ASM;
                     spw_ioctl_send_ASM.hdr = (char *) header;
                     spw_ioctl_send_ASM.options = 0;
                     // (2) BUILD THE HEADER
                     increment_seq_counter_source_id( header->packetSequenceControl, sid );
                     header->packetLength[0] = (unsigned char) (length>>8);
                     header->packetLength[1] = (unsigned char) (length);
                     header->sid = (unsigned char) sid;   // SID
                     header->pa_lfr_pkt_cnt_asm = 3;
                     header->pa_lfr_pkt_nr_asm = (unsigned char) (i+1);
                     // (3) SET PACKET TIME
                     header->time[0] = (unsigned char) (coarseTime>>24);
                     header->time[1] = (unsigned char) (coarseTime>>16);
                     header->time[2] = (unsigned char) (coarseTime>>8);
                     header->time[3] = (unsigned char) (coarseTime);
                     header->time[4] = (unsigned char) (fineTime>>8);
                     header->time[5] = (unsigned char) (fineTime);
                     //
                     header->acquisitionTime[0] = header->time[0];
                     header->acquisitionTime[1] = header->time[1];
                     header->acquisitionTime[2] = header->time[2];
                     header->acquisitionTime[3] = header->time[3];
                     header->acquisitionTime[4] = header->time[4];
                     header->acquisitionTime[5] = header->time[5];
                     // (4) SEND PACKET
                     status = ioctl( fdSPW, SPACEWIRE_IOCTRL_SEND, &spw_ioctl_send_ASM );
                     if (status != RTEMS_SUCCESSFUL) {
                         PRINTF1("in ASM_send *** ERR %d\n", (int) status)
                     }
                 }
             }
             void spw_send_asm_f1( ring_node *ring_node_to_send,
                                Header_TM_LFR_SCIENCE_ASM_t *header )
             {
                 unsigned int i;
                 unsigned int length = 0;
                 rtems_status_code status;
                 unsigned int sid;
                 float *spectral_matrix;
                 int coarseTime;
                 int fineTime;
                 spw_ioctl_pkt_send spw_ioctl_send_ASM;
                 sid = ring_node_to_send->sid;
                 spectral_matrix = (float*) ring_node_to_send->buffer_address;
                 coarseTime = ring_node_to_send->coarseTime;
                 fineTime = ring_node_to_send->fineTime;
                 header->biaStatusInfo = pa_bia_status_info;
                 header->sy_lfr_common_parameters = parameter_dump_packet.sy_lfr_common_parameters;
                 for (i=0; i<3; i++)
                 {
                     if ((i==0) || (i==1))
                     {
                         spw_ioctl_send_ASM.dlen = DLEN_ASM_F1_PKT_1;
                         spw_ioctl_send_ASM.data = (char *) &spectral_matrix[
                                 ( (ASM_F1_INDICE_START + (i*NB_BINS_PER_PKT_ASM_F1_1) ) * NB_VALUES_PER_SM )
                                 ];
                         length = PACKET_LENGTH_TM_LFR_SCIENCE_ASM_F1_1;
                         header->serviceSubType = TM_SUBTYPE_LFR_SCIENCE_6;
                         header->pa_lfr_asm_blk_nr[0] = (unsigned char)  ( (NB_BINS_PER_PKT_ASM_F1_1) >> 8 ); // BLK_NR MSB
                         header->pa_lfr_asm_blk_nr[1] = (unsigned char)    (NB_BINS_PER_PKT_ASM_F1_1);        // BLK_NR LSB
                     }
                     else
                     {
                         spw_ioctl_send_ASM.dlen = DLEN_ASM_F1_PKT_2;
                         spw_ioctl_send_ASM.data = (char*) &spectral_matrix[
                                 ( (ASM_F1_INDICE_START + (i*NB_BINS_PER_PKT_ASM_F1_1) ) * NB_VALUES_PER_SM )
                                 ];
                         length = PACKET_LENGTH_TM_LFR_SCIENCE_ASM_F1_2;
                         header->serviceSubType = TM_SUBTYPE_LFR_SCIENCE_6;
                         header->pa_lfr_asm_blk_nr[0] = (unsigned char)  ( (NB_BINS_PER_PKT_ASM_F1_2) >> 8 ); // BLK_NR MSB
                         header->pa_lfr_asm_blk_nr[1] = (unsigned char)    (NB_BINS_PER_PKT_ASM_F1_2);        // BLK_NR LSB
                     }
                     spw_ioctl_send_ASM.hlen = HEADER_LENGTH_TM_LFR_SCIENCE_ASM;
                     spw_ioctl_send_ASM.hdr = (char *) header;
                     spw_ioctl_send_ASM.options = 0;
                     // (2) BUILD THE HEADER
                     increment_seq_counter_source_id( header->packetSequenceControl, sid );
                     header->packetLength[0] = (unsigned char) (length>>8);
                     header->packetLength[1] = (unsigned char) (length);
                     header->sid = (unsigned char) sid;   // SID
                     header->pa_lfr_pkt_cnt_asm = 3;
                     header->pa_lfr_pkt_nr_asm = (unsigned char) (i+1);
                     // (3) SET PACKET TIME
                     header->time[0] = (unsigned char) (coarseTime>>24);
                     header->time[1] = (unsigned char) (coarseTime>>16);
                     header->time[2] = (unsigned char) (coarseTime>>8);
                     header->time[3] = (unsigned char) (coarseTime);
                     header->time[4] = (unsigned char) (fineTime>>8);
                     header->time[5] = (unsigned char) (fineTime);
                     //
                     header->acquisitionTime[0] = header->time[0];
                     header->acquisitionTime[1] = header->time[1];
                     header->acquisitionTime[2] = header->time[2];
                     header->acquisitionTime[3] = header->time[3];
                     header->acquisitionTime[4] = header->time[4];
                     header->acquisitionTime[5] = header->time[5];
                     // (4) SEND PACKET
                     status = ioctl( fdSPW, SPACEWIRE_IOCTRL_SEND, &spw_ioctl_send_ASM );
                     if (status != RTEMS_SUCCESSFUL) {
                         PRINTF1("in ASM_send *** ERR %d\n", (int) status)
                     }
                 }
             }
             void spw_send_asm_f2( ring_node *ring_node_to_send,
                                Header_TM_LFR_SCIENCE_ASM_t *header )
             {
                 unsigned int i;
                 unsigned int length = 0;
                 rtems_status_code status;
                 unsigned int sid;
                 float *spectral_matrix;
                 int coarseTime;
                 int fineTime;
                 spw_ioctl_pkt_send spw_ioctl_send_ASM;
                 sid = ring_node_to_send->sid;
                 spectral_matrix = (float*) ring_node_to_send->buffer_address;
                 coarseTime = ring_node_to_send->coarseTime;
                 fineTime = ring_node_to_send->fineTime;
                 header->biaStatusInfo = pa_bia_status_info;
                 header->sy_lfr_common_parameters = parameter_dump_packet.sy_lfr_common_parameters;
                 for (i=0; i<3; i++)
                 {
                     spw_ioctl_send_ASM.dlen = DLEN_ASM_F2_PKT;
                     spw_ioctl_send_ASM.data = (char *) &spectral_matrix[
                             ( (ASM_F2_INDICE_START + (i*NB_BINS_PER_PKT_ASM_F2) ) * NB_VALUES_PER_SM )
                             ];
                     length = PACKET_LENGTH_TM_LFR_SCIENCE_ASM_F2;
                     header->serviceSubType = TM_SUBTYPE_LFR_SCIENCE_3;
                     header->pa_lfr_asm_blk_nr[0] = (unsigned char)  ( (NB_BINS_PER_PKT_ASM_F2) >> 8 ); // BLK_NR MSB
                     header->pa_lfr_asm_blk_nr[1] = (unsigned char)    (NB_BINS_PER_PKT_ASM_F2);        // BLK_NR LSB
                     spw_ioctl_send_ASM.hlen = HEADER_LENGTH_TM_LFR_SCIENCE_ASM;
                     spw_ioctl_send_ASM.hdr = (char *) header;
                     spw_ioctl_send_ASM.options = 0;
                     // (2) BUILD THE HEADER
                     increment_seq_counter_source_id( header->packetSequenceControl, sid );
                     header->packetLength[0] = (unsigned char) (length>>8);
                     header->packetLength[1] = (unsigned char) (length);
                     header->sid = (unsigned char) sid;   // SID
                     header->pa_lfr_pkt_cnt_asm = 3;
                     header->pa_lfr_pkt_nr_asm = (unsigned char) (i+1);
                     // (3) SET PACKET TIME
                     header->time[0] = (unsigned char) (coarseTime>>24);
                     header->time[1] = (unsigned char) (coarseTime>>16);
                     header->time[2] = (unsigned char) (coarseTime>>8);
                     header->time[3] = (unsigned char) (coarseTime);
                     header->time[4] = (unsigned char) (fineTime>>8);
                     header->time[5] = (unsigned char) (fineTime);
                     //
                     header->acquisitionTime[0] = header->time[0];
                     header->acquisitionTime[1] = header->time[1];
                     header->acquisitionTime[2] = header->time[2];
                     header->acquisitionTime[3] = header->time[3];
                     header->acquisitionTime[4] = header->time[4];
                     header->acquisitionTime[5] = header->time[5];
                     // (4) SEND PACKET
                     status = ioctl( fdSPW, SPACEWIRE_IOCTRL_SEND, &spw_ioctl_send_ASM );
                     if (status != RTEMS_SUCCESSFUL) {
                         PRINTF1("in ASM_send *** ERR %d\n", (int) status)
                     }
                 }
             }
             void spw_send_k_dump( ring_node *ring_node_to_send )
             {
                 rtems_status_code status;
                 Packet_TM_LFR_KCOEFFICIENTS_DUMP_t *kcoefficients_dump;
                 unsigned int packetLength;
                 unsigned int size;
                 PRINTF("spw_send_k_dump\n")
                 kcoefficients_dump = (Packet_TM_LFR_KCOEFFICIENTS_DUMP_t *) ring_node_to_send->buffer_address;
                 packetLength = kcoefficients_dump->packetLength[0] * 256 + kcoefficients_dump->packetLength[1];
                 size = packetLength + CCSDS_TC_TM_PACKET_OFFSET + CCSDS_PROTOCOLE_EXTRA_BYTES;
                 PRINTF2("packetLength %d, size %d\n", packetLength, size )
                 status = write( fdSPW, (char *) ring_node_to_send->buffer_address, size );
                 if (status == -1){
                     PRINTF2("in SEND *** (2.a) ERRNO = %d, size = %d\n", errno, size)
                 }
                 ring_node_to_send->status = 0x00;
             }

src/tc_handler.c +89 -4

             /** Functions and tasks related to TeleCommand handling.
              *
              * @file
              * @author P. LEROY
              *
              * A group of functions to handle TeleCommands:\n
              * action launching\n
              * TC parsing\n
              * ...
              *
              */
             #include "tc_handler.h"
             #include "math.h"
             //***********
             // RTEMS TASK
             rtems_task actn_task( rtems_task_argument unused )
             {
                 /** This RTEMS task is responsible for launching actions upton the reception of valid TeleCommands.
                  *
                  * @param unused is the starting argument of the RTEMS task
                  *
                  * The ACTN task waits for data coming from an RTEMS msesage queue. When data arrives, it launches specific actions depending
                  * on the incoming TeleCommand.
                  *
                  */
                 int result;
                 rtems_status_code status;       // RTEMS status code
                 ccsdsTelecommandPacket_t TC;    // TC sent to the ACTN task
                 size_t size;                    // size of the incoming TC packet
                 unsigned char subtype;          // subtype of the current TC packet
                 unsigned char time[6];
                 rtems_id queue_rcv_id;
                 rtems_id queue_snd_id;
                 status =  get_message_queue_id_recv( &queue_rcv_id );
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in ACTN *** ERR get_message_queue_id_recv %d\n", status)
                 }
                 status =  get_message_queue_id_send( &queue_snd_id );
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in ACTN *** ERR get_message_queue_id_send %d\n", status)
                 }
                 result = LFR_SUCCESSFUL;
                 subtype = 0;          // subtype of the current TC packet
                 BOOT_PRINTF("in ACTN *** \n")
                         while(1)
                 {
                     status = rtems_message_queue_receive( queue_rcv_id, (char*) &TC, &size,
                                                           RTEMS_WAIT, RTEMS_NO_TIMEOUT);
                     getTime( time );    // set time to the current time
                     if (status!=RTEMS_SUCCESSFUL)
                     {
                         PRINTF1("ERR *** in task ACTN *** error receiving a message, code %d \n", status)
                     }
                     else
                     {
                         subtype = TC.serviceSubType;
                         switch(subtype)
                         {
                         case TC_SUBTYPE_RESET:
                             result = action_reset( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_LOAD_COMM:
                             result = action_load_common_par( &TC );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_LOAD_NORM:
                             result = action_load_normal_par( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_LOAD_BURST:
                             result = action_load_burst_par( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_LOAD_SBM1:
                             result = action_load_sbm1_par( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_LOAD_SBM2:
                             result = action_load_sbm2_par( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_DUMP:
                             result = action_dump_par( &TC,  queue_snd_id );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_ENTER:
                             result = action_enter_mode( &TC, queue_snd_id );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_UPDT_INFO:
                             result = action_update_info( &TC, queue_snd_id );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_EN_CAL:
                             result = action_enable_calibration( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_DIS_CAL:
                             result = action_disable_calibration( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_LOAD_K:
                             result = action_load_kcoefficients( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_DUMP_K:
                             result = action_dump_kcoefficients( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_LOAD_FBINS:
                             result = action_load_fbins_mask( &TC, queue_snd_id, time );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         case TC_SUBTYPE_UPDT_TIME:
                             result = action_update_time( &TC );
                             close_action( &TC, result, queue_snd_id );
                             break;
                         default:
                             break;
                         }
                     }
                 }
             }
             //***********
             // TC ACTIONS
             int action_reset(ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time)
             {
                 /** This function executes specific actions when a TC_LFR_RESET TeleCommand has been received.
                  *
                  * @param TC points to the TeleCommand packet that is being processed
                  * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver
                  *
                  */
                 PRINTF("this is the end!!!\n")
                         exit(0);
                 send_tm_lfr_tc_exe_not_implemented( TC, queue_id, time );
                 return LFR_DEFAULT;
             }
             int action_enter_mode(ccsdsTelecommandPacket_t *TC, rtems_id queue_id )
             {
                 /** This function executes specific actions when a TC_LFR_ENTER_MODE TeleCommand has been received.
                  *
                  * @param TC points to the TeleCommand packet that is being processed
                  * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver
                  *
                  */
                 rtems_status_code status;
                 unsigned char requestedMode;
                 unsigned int *transitionCoarseTime_ptr;
                 unsigned int transitionCoarseTime;
                 unsigned char * bytePosPtr;
                 bytePosPtr = (unsigned char *) &TC->packetID;
                 requestedMode = bytePosPtr[ BYTE_POS_CP_MODE_LFR_SET ];
                 transitionCoarseTime_ptr = (unsigned int *) ( &bytePosPtr[ BYTE_POS_CP_LFR_ENTER_MODE_TIME ] );
                 transitionCoarseTime = (*transitionCoarseTime_ptr) & 0x7fffffff;
                 status = check_mode_value( requestedMode );
                 if ( status != LFR_SUCCESSFUL )     // the mode value is inconsistent
                 {
                     send_tm_lfr_tc_exe_inconsistent( TC, queue_id, BYTE_POS_CP_MODE_LFR_SET, requestedMode );
                 }
                 else                                // the mode value is valid, check the transition
                 {
                     status = check_mode_transition(requestedMode);
                     if (status != LFR_SUCCESSFUL)
                     {
                         PRINTF("ERR *** in action_enter_mode *** check_mode_transition\n")
                                 send_tm_lfr_tc_exe_not_executable( TC, queue_id );
                     }
                 }
                 if ( status == LFR_SUCCESSFUL )     // the transition is valid, check the date
                 {
                     status = check_transition_date( transitionCoarseTime );
                     if (status != LFR_SUCCESSFUL)
                     {
                         PRINTF("ERR *** in action_enter_mode *** check_transition_date\n")
                                 send_tm_lfr_tc_exe_inconsistent( TC, queue_id,
                                                                  BYTE_POS_CP_LFR_ENTER_MODE_TIME,
                                                                  bytePosPtr[ BYTE_POS_CP_LFR_ENTER_MODE_TIME + 3 ] );
                     }
                 }
                 if ( status == LFR_SUCCESSFUL )     // the date is valid, enter the mode
                 {
                     PRINTF1("OK  *** in action_enter_mode *** enter mode %d\n", requestedMode);
                     switch(requestedMode)
                     {
                     case LFR_MODE_STANDBY:
                         status = enter_mode_standby();
                         break;
                     case LFR_MODE_NORMAL:
                         status = enter_mode_normal( transitionCoarseTime );
                         break;
                     case LFR_MODE_BURST:
                         status = enter_mode_burst( transitionCoarseTime );
                         break;
                     case LFR_MODE_SBM1:
                         status = enter_mode_sbm1( transitionCoarseTime );
                         break;
                     case LFR_MODE_SBM2:
                         status = enter_mode_sbm2( transitionCoarseTime );
                         break;
                     default:
                         break;
                     }
                 }
                 return status;
             }
             int action_update_info(ccsdsTelecommandPacket_t *TC, rtems_id queue_id)
             {
                 /** This function executes specific actions when a TC_LFR_UPDATE_INFO TeleCommand has been received.
                  *
                  * @param TC points to the TeleCommand packet that is being processed
                  * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver
                  *
                  * @return LFR directive status code:
                  * - LFR_DEFAULT
                  * - LFR_SUCCESSFUL
                  *
                  */
                 unsigned int val;
                 int result;
                 unsigned int status;
                 unsigned char mode;
                 unsigned char * bytePosPtr;
                 bytePosPtr = (unsigned char *) &TC->packetID;
                 // check LFR mode
                 mode = (bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET5 ] & 0x1e) >> 1;
                 status = check_update_info_hk_lfr_mode( mode );
                 if (status == LFR_SUCCESSFUL)  // check TDS mode
                 {
                     mode = (bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET6 ] & 0xf0) >> 4;
                     status = check_update_info_hk_tds_mode( mode );
                 }
                 if (status == LFR_SUCCESSFUL)  // check THR mode
                 {
                     mode = (bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET6 ] & 0x0f);
                     status = check_update_info_hk_thr_mode( mode );
                 }
                 if (status == LFR_SUCCESSFUL)  // if the parameter check is successful
                 {
                     val = housekeeping_packet.hk_lfr_update_info_tc_cnt[0] * 256
                             + housekeeping_packet.hk_lfr_update_info_tc_cnt[1];
                     val++;
                     housekeeping_packet.hk_lfr_update_info_tc_cnt[0] = (unsigned char) (val >> 8);
                     housekeeping_packet.hk_lfr_update_info_tc_cnt[1] = (unsigned char) (val);
                 }
                 // pa_bia_status_info
                 // => pa_bia_mode_mux_set       3 bits
                 // => pa_bia_mode_hv_enabled    1 bit
                 // => pa_bia_mode_bias1_enabled 1 bit
                 // => pa_bia_mode_bias2_enabled 1 bit
                 // => pa_bia_mode_bias3_enabled 1 bit
                 // => pa_bia_on_off (cp_dpu_bias_on_off)
                 pa_bia_status_info = bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET2 ] & 0xfe; // [1111 1110]
                 pa_bia_status_info = pa_bia_status_info
                         | (bytePosPtr[ BYTE_POS_UPDATE_INFO_PARAMETERS_SET1 ] & 0x1);
                 result = status;
                 return result;
             }
             int action_enable_calibration(ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time)
             {
                 /** This function executes specific actions when a TC_LFR_ENABLE_CALIBRATION TeleCommand has been received.
                  *
                  * @param TC points to the TeleCommand packet that is being processed
                  * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver
                  *
                  */
                 int result;
                 result = LFR_DEFAULT;
                 setCalibration( true );
                 result = LFR_SUCCESSFUL;
                 return result;
             }
             int action_disable_calibration(ccsdsTelecommandPacket_t *TC, rtems_id queue_id, unsigned char *time)
             {
                 /** This function executes specific actions when a TC_LFR_DISABLE_CALIBRATION TeleCommand has been received.
                  *
                  * @param TC points to the TeleCommand packet that is being processed
                  * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver
                  *
                  */
                 int result;
                 result = LFR_DEFAULT;
                 setCalibration( false );
                 result = LFR_SUCCESSFUL;
                 return result;
             }
             int action_update_time(ccsdsTelecommandPacket_t *TC)
             {
                 /** This function executes specific actions when a TC_LFR_UPDATE_TIME TeleCommand has been received.
                  *
                  * @param TC points to the TeleCommand packet that is being processed
                  * @param queue_id is the id of the queue which handles TM transmission by the SpaceWire driver
                  *
                  * @return LFR_SUCCESSFUL
                  *
                  */
                 unsigned int val;
                 time_management_regs->coarse_time_load = (TC->dataAndCRC[0] << 24)
                         + (TC->dataAndCRC[1] << 16)
                         + (TC->dataAndCRC[2] << 8)
                         + TC->dataAndCRC[3];
                 val = housekeeping_packet.hk_lfr_update_time_tc_cnt[0] * 256
                         + housekeeping_packet.hk_lfr_update_time_tc_cnt[1];
                 val++;
                 housekeeping_packet.hk_lfr_update_time_tc_cnt[0] = (unsigned char) (val >> 8);
                 housekeeping_packet.hk_lfr_update_time_tc_cnt[1] = (unsigned char) (val);
                 return LFR_SUCCESSFUL;
             }
             //*******************
             // ENTERING THE MODES
             int check_mode_value( unsigned char requestedMode )
             {
                 int status;
                 if ( (requestedMode != LFR_MODE_STANDBY)
                      && (requestedMode != LFR_MODE_NORMAL) && (requestedMode != LFR_MODE_BURST)
                      && (requestedMode != LFR_MODE_SBM1) && (requestedMode != LFR_MODE_SBM2) )
                 {
                     status = LFR_DEFAULT;
                 }
                 else
                 {
                     status = LFR_SUCCESSFUL;
                 }
                 return status;
             }
             int check_mode_transition( unsigned char requestedMode )
             {
                 /** This function checks the validity of the transition requested by the TC_LFR_ENTER_MODE.
                  *
                  * @param requestedMode is the mode requested by the TC_LFR_ENTER_MODE
                  *
                  * @return LFR directive status codes:
                  * - LFR_SUCCESSFUL - the transition is authorized
                  * - LFR_DEFAULT - the transition is not authorized
                  *
                  */
                 int status;
                 switch (requestedMode)
                 {
                 case LFR_MODE_STANDBY:
                     if ( lfrCurrentMode == LFR_MODE_STANDBY ) {
                         status = LFR_DEFAULT;
                     }
                     else
                     {
                         status = LFR_SUCCESSFUL;
                     }
                     break;
                 case LFR_MODE_NORMAL:
                     if ( lfrCurrentMode == LFR_MODE_NORMAL ) {
                         status = LFR_DEFAULT;
                     }
                     else {
                         status = LFR_SUCCESSFUL;
                     }
                     break;
                 case LFR_MODE_BURST:
                     if ( lfrCurrentMode == LFR_MODE_BURST ) {
                         status = LFR_DEFAULT;
                     }
                     else {
                         status = LFR_SUCCESSFUL;
                     }
                     break;
                 case LFR_MODE_SBM1:
                     if ( lfrCurrentMode == LFR_MODE_SBM1 ) {
                         status = LFR_DEFAULT;
                     }
                     else {
                         status = LFR_SUCCESSFUL;
                     }
                     break;
                 case LFR_MODE_SBM2:
                     if ( lfrCurrentMode == LFR_MODE_SBM2 ) {
                         status = LFR_DEFAULT;
                     }
                     else {
                         status = LFR_SUCCESSFUL;
                     }
                     break;
                 default:
                     status = LFR_DEFAULT;
                     break;
                 }
                 return status;
             }
+            void update_last_valid_transition_date(unsigned int transitionCoarseTime)
+            {
+                lastValidTransitionDate = transitionCoarseTime;
+            }
             int check_transition_date( unsigned int transitionCoarseTime )
             {
                 int status;
                 unsigned int localCoarseTime;
                 unsigned int deltaCoarseTime;
                 status = LFR_SUCCESSFUL;
                 if (transitionCoarseTime == 0)  // transition time = 0 means an instant transition
                 {
                     status = LFR_SUCCESSFUL;
                 }
                 else
                 {
                     localCoarseTime = time_management_regs->coarse_time & 0x7fffffff;
                     PRINTF2("localTime = %x, transitionTime = %x\n", localCoarseTime, transitionCoarseTime)
                             if ( transitionCoarseTime <= localCoarseTime )   // SSS-CP-EQS-322
                     {
                         status = LFR_DEFAULT;
                         PRINTF("ERR *** in check_transition_date *** transitionCoarseTime <= localCoarseTime\n")
                     }
                     if (status == LFR_SUCCESSFUL)
                     {
                         deltaCoarseTime = transitionCoarseTime - localCoarseTime;
                         if ( deltaCoarseTime > 3 )                  // SSS-CP-EQS-323
                         {
                             status = LFR_DEFAULT;
                             PRINTF1("ERR *** in check_transition_date *** deltaCoarseTime = %x\n", deltaCoarseTime)
                         }
                     }
                 }
                 return status;
             }
             int restart_asm_activities( unsigned char lfrRequestedMode )
             {
                 rtems_status_code status;
                 status = stop_spectral_matrices();
                 status = restart_asm_tasks( lfrRequestedMode );
                 launch_spectral_matrix();
                 return status;
             }
             int stop_spectral_matrices( void )
             {
                 /** This function stops and restarts the current mode average spectral matrices activities.
                  *
                  * @return RTEMS directive status codes:
                  * - RTEMS_SUCCESSFUL - task restarted successfully
                  * - RTEMS_INVALID_ID - task id invalid
                  * - RTEMS_ALREADY_SUSPENDED - task already suspended
                  *
                  */
                 rtems_status_code status;
                 status = RTEMS_SUCCESSFUL;
                 // (1) mask interruptions
                 LEON_Mask_interrupt( IRQ_SPECTRAL_MATRIX );     // clear spectral matrix interrupt
                 // (2) reset spectral matrices registers
                 set_sm_irq_onNewMatrix( 0 );                    // stop the spectral matrices
                 reset_sm_status();
                 // (3) clear interruptions
                 LEON_Clear_interrupt( IRQ_SPECTRAL_MATRIX );    // clear spectral matrix interrupt
                 // suspend several tasks
                 if (lfrCurrentMode != LFR_MODE_STANDBY) {
                     status = suspend_asm_tasks();
                 }
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in stop_current_mode *** in suspend_science_tasks *** ERR code: %d\n", status)
                 }
                 return status;
             }
             int stop_current_mode( void )
             {
                 /** This function stops the current mode by masking interrupt lines and suspending science tasks.
                  *
                  * @return RTEMS directive status codes:
                  * - RTEMS_SUCCESSFUL - task restarted successfully
                  * - RTEMS_INVALID_ID - task id invalid
                  * - RTEMS_ALREADY_SUSPENDED - task already suspended
                  *
                  */
                 rtems_status_code status;
                 status = RTEMS_SUCCESSFUL;
                 // (1) mask interruptions
                 LEON_Mask_interrupt( IRQ_WAVEFORM_PICKER );     // mask waveform picker interrupt
                 LEON_Mask_interrupt( IRQ_SPECTRAL_MATRIX );     // clear spectral matrix interrupt
                 // (2) reset waveform picker registers
                 reset_wfp_burst_enable();                       // reset burst and enable bits
                 reset_wfp_status();                             // reset all the status bits
                 // (3) reset spectral matrices registers
                 set_sm_irq_onNewMatrix( 0 );                    // stop the spectral matrices
                 reset_sm_status();
                 // reset lfr VHDL module
                 reset_lfr();
                 reset_extractSWF();                             // reset the extractSWF flag to false
                 // (4) clear interruptions
                 LEON_Clear_interrupt( IRQ_WAVEFORM_PICKER );    // clear waveform picker interrupt
                 LEON_Clear_interrupt( IRQ_SPECTRAL_MATRIX );    // clear spectral matrix interrupt
                 // suspend several tasks
                 if (lfrCurrentMode != LFR_MODE_STANDBY) {
                     status = suspend_science_tasks();
                 }
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in stop_current_mode *** in suspend_science_tasks *** ERR code: %d\n", status)
                 }
                 return status;
             }
             int enter_mode_standby()
             {
+                /** This function is used to put LFR in the STANDBY mode.
+                 *
+                 * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE
+                 *
+                 * @return RTEMS directive status codes:
+                 * - RTEMS_SUCCESSFUL - task restarted successfully
+                 * - RTEMS_INVALID_ID - task id invalid
+                 * - RTEMS_INCORRECT_STATE - task never started
+                 * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task
+                 *
+                 * The STANDBY mode does not depends on a specific transition date, the effect of the TC_LFR_ENTER_MODE
+                 * is immediate.
+                 *
+                 */
                 int status;
                 status = stop_current_mode();       // STOP THE CURRENT MODE
             #ifdef PRINT_TASK_STATISTICS
                 rtems_cpu_usage_report();
             #endif
             #ifdef PRINT_STACK_REPORT
                 PRINTF("stack report selected\n")
                 rtems_stack_checker_report_usage();
             #endif
                 return status;
             }
             int enter_mode_normal( unsigned int transitionCoarseTime )
             {
+                /** This function is used to start the NORMAL mode.
+                 *
+                 * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE
+                 *
+                 * @return RTEMS directive status codes:
+                 * - RTEMS_SUCCESSFUL - task restarted successfully
+                 * - RTEMS_INVALID_ID - task id invalid
+                 * - RTEMS_INCORRECT_STATE - task never started
+                 * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task
+                 *
+                 * The way the NORMAL mode is started depends on the LFR current mode. If LFR is in SBM1 or SBM2,
+                 * the snapshots are not restarted, only ASM, BP and CWF data generation are affected.
+                 *
+                 */
                 int status;
             #ifdef PRINT_TASK_STATISTICS
                 rtems_cpu_usage_reset();
             #endif
                 status = RTEMS_UNSATISFIED;
                 switch( lfrCurrentMode )
                 {
                 case LFR_MODE_STANDBY:
                     status = restart_science_tasks( LFR_MODE_NORMAL ); // restart science tasks
                     if (status == RTEMS_SUCCESSFUL)         // relaunch spectral_matrix and waveform_picker modules
                     {
                         launch_spectral_matrix( );
                         launch_waveform_picker( LFR_MODE_NORMAL, transitionCoarseTime );
                     }
                     break;
                 case LFR_MODE_BURST:
                     status = stop_current_mode();           // stop the current mode
                     status = restart_science_tasks( LFR_MODE_NORMAL ); // restart the science tasks
                     if (status == RTEMS_SUCCESSFUL)         // relaunch spectral_matrix and waveform_picker modules
                     {
                         launch_spectral_matrix( );
                         launch_waveform_picker( LFR_MODE_NORMAL, transitionCoarseTime );
                     }
                     break;
                 case LFR_MODE_SBM1:
-                    restart_asm_activities( LFR_MODE_NORMAL );
+                    restart_asm_activities( LFR_MODE_NORMAL ); //  this is necessary to restart ASM tasks to update the parameters
-                    status = LFR_SUCCESSFUL;                // lfrCurrentMode will be updated after the execution of close_action
+                    status = LFR_SUCCESSFUL;                   // lfrCurrentMode will be updated after the execution of close_action
                     break;
                 case LFR_MODE_SBM2:
-                    restart_asm_activities( LFR_MODE_NORMAL );
+                    restart_asm_activities( LFR_MODE_NORMAL ); //  this is necessary to restart ASM tasks to update the parameters
-                    status = LFR_SUCCESSFUL;                // lfrCurrentMode will be updated after the execution of close_action
+                    status = LFR_SUCCESSFUL;                   // lfrCurrentMode will be updated after the execution of close_action
                     break;
                 default:
                     break;
                 }
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("ERR *** in enter_mode_normal *** status = %d\n", status)
                             status = RTEMS_UNSATISFIED;
                 }
                 return status;
             }
             int enter_mode_burst( unsigned int transitionCoarseTime )
             {
+                /** This function is used to start the BURST mode.
+                 *
+                 * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE
+                 *
+                 * @return RTEMS directive status codes:
+                 * - RTEMS_SUCCESSFUL - task restarted successfully
+                 * - RTEMS_INVALID_ID - task id invalid
+                 * - RTEMS_INCORRECT_STATE - task never started
+                 * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task
+                 *
+                 * The way the BURST mode is started does not depend on the LFR current mode.
+                 *
+                 */
                 int status;
             #ifdef PRINT_TASK_STATISTICS
                 rtems_cpu_usage_reset();
             #endif
                 status = stop_current_mode();           // stop the current mode
                 status = restart_science_tasks( LFR_MODE_BURST ); // restart the science tasks
                 if (status == RTEMS_SUCCESSFUL)         // relaunch spectral_matrix and waveform_picker modules
                 {
                     launch_spectral_matrix( );
                     launch_waveform_picker( LFR_MODE_BURST, transitionCoarseTime );
                 }
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("ERR *** in enter_mode_burst *** status = %d\n", status)
                             status = RTEMS_UNSATISFIED;
                 }
                 return status;
             }
             int enter_mode_sbm1( unsigned int transitionCoarseTime )
             {
+                /** This function is used to start the SBM1 mode.
+                 *
+                 * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE
+                 *
+                 * @return RTEMS directive status codes:
+                 * - RTEMS_SUCCESSFUL - task restarted successfully
+                 * - RTEMS_INVALID_ID - task id invalid
+                 * - RTEMS_INCORRECT_STATE - task never started
+                 * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task
+                 *
+                 * The way the SBM1 mode is started depends on the LFR current mode. If LFR is in NORMAL or SBM2,
+                 * the snapshots are not restarted, only ASM, BP and CWF data generation are affected. In other
+                 * cases, the acquisition is completely restarted.
+                 *
+                 */
                 int status;
             #ifdef PRINT_TASK_STATISTICS
                 rtems_cpu_usage_reset();
             #endif
                 status = RTEMS_UNSATISFIED;
                 switch( lfrCurrentMode )
                 {
                 case LFR_MODE_STANDBY:
                     status = restart_science_tasks( LFR_MODE_SBM1 ); // restart science tasks
                     if (status == RTEMS_SUCCESSFUL)         // relaunch spectral_matrix and waveform_picker modules
                     {
                         launch_spectral_matrix( );
                         launch_waveform_picker( LFR_MODE_SBM1, transitionCoarseTime );
                     }
                     break;
                 case LFR_MODE_NORMAL:                       // lfrCurrentMode will be updated after the execution of close_action
                     restart_asm_activities( LFR_MODE_SBM1 );
                     status = LFR_SUCCESSFUL;
                     break;
                 case LFR_MODE_BURST:
                     status = stop_current_mode();           // stop the current mode
                     status = restart_science_tasks( LFR_MODE_SBM1 ); // restart the science tasks
                     if (status == RTEMS_SUCCESSFUL)         // relaunch spectral_matrix and waveform_picker modules
                     {
                         launch_spectral_matrix( );
                         launch_waveform_picker( LFR_MODE_SBM1, transitionCoarseTime );
                     }
                     break;
                 case LFR_MODE_SBM2:
                     restart_asm_activities( LFR_MODE_SBM1 );
                     status = LFR_SUCCESSFUL;                // lfrCurrentMode will be updated after the execution of close_action
                     break;
                 default:
                     break;
                 }
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("ERR *** in enter_mode_sbm1 *** status = %d\n", status)
                             status = RTEMS_UNSATISFIED;
                 }
                 return status;
             }
             int enter_mode_sbm2( unsigned int transitionCoarseTime )
             {
+                /** This function is used to start the SBM2 mode.
+                 *
+                 * @param transitionCoarseTime is the requested transition time contained in the TC_LFR_ENTER_MODE
+                 *
+                 * @return RTEMS directive status codes:
+                 * - RTEMS_SUCCESSFUL - task restarted successfully
+                 * - RTEMS_INVALID_ID - task id invalid
+                 * - RTEMS_INCORRECT_STATE - task never started
+                 * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task
+                 *
+                 * The way the SBM2 mode is started depends on the LFR current mode. If LFR is in NORMAL or SBM1,
+                 * the snapshots are not restarted, only ASM, BP and CWF data generation are affected. In other
+                 * cases, the acquisition is completely restarted.
+                 *
+                 */
                 int status;
             #ifdef PRINT_TASK_STATISTICS
                 rtems_cpu_usage_reset();
             #endif
                 status = RTEMS_UNSATISFIED;
                 switch( lfrCurrentMode )
                 {
                 case LFR_MODE_STANDBY:
                     status = restart_science_tasks( LFR_MODE_SBM2 ); // restart science tasks
                     if (status == RTEMS_SUCCESSFUL)         // relaunch spectral_matrix and waveform_picker modules
                     {
                         launch_spectral_matrix( );
                         launch_waveform_picker( LFR_MODE_SBM2, transitionCoarseTime );
                     }
                     break;
                 case LFR_MODE_NORMAL:
                     restart_asm_activities( LFR_MODE_SBM2 );
                     status = LFR_SUCCESSFUL;                // lfrCurrentMode will be updated after the execution of close_action
                     break;
                 case LFR_MODE_BURST:
                     status = stop_current_mode();           // stop the current mode
                     status = restart_science_tasks( LFR_MODE_SBM2 ); // restart the science tasks
                     if (status == RTEMS_SUCCESSFUL)         // relaunch spectral_matrix and waveform_picker modules
                     {
                         launch_spectral_matrix( );
                         launch_waveform_picker( LFR_MODE_SBM2, transitionCoarseTime );
                     }
                     break;
                 case LFR_MODE_SBM1:
                     restart_asm_activities( LFR_MODE_SBM2 );
                     status = LFR_SUCCESSFUL;                // lfrCurrentMode will be updated after the execution of close_action
                     break;
                 default:
                     break;
                 }
                 if (status != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("ERR *** in enter_mode_sbm2 *** status = %d\n", status)
                             status = RTEMS_UNSATISFIED;
                 }
                 return status;
             }
             int restart_science_tasks( unsigned char lfrRequestedMode )
             {
                 /** This function is used to restart all science tasks.
                  *
                  * @return RTEMS directive status codes:
                  * - RTEMS_SUCCESSFUL - task restarted successfully
                  * - RTEMS_INVALID_ID - task id invalid
                  * - RTEMS_INCORRECT_STATE - task never started
                  * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task
                  *
                  * Science tasks are AVF0, PRC0, WFRM, CWF3, CW2, CWF1
                  *
                  */
                 rtems_status_code status[10];
                 rtems_status_code ret;
                 ret = RTEMS_SUCCESSFUL;
                 status[0] = rtems_task_restart( Task_id[TASKID_AVF0], lfrRequestedMode );
                 if (status[0] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** AVF0 ERR %d\n", status[0])
                 }
                 status[1] = rtems_task_restart( Task_id[TASKID_PRC0], lfrRequestedMode );
                 if (status[1] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** PRC0 ERR %d\n", status[1])
                 }
                 status[2] = rtems_task_restart( Task_id[TASKID_WFRM],1 );
                 if (status[2] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** WFRM ERR %d\n", status[2])
                 }
                 status[3] = rtems_task_restart( Task_id[TASKID_CWF3],1 );
                 if (status[3] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** CWF3 ERR %d\n", status[3])
                 }
                 status[4] = rtems_task_restart( Task_id[TASKID_CWF2],1 );
                 if (status[4] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** CWF2 ERR %d\n", status[4])
                 }
                 status[5] = rtems_task_restart( Task_id[TASKID_CWF1],1 );
                 if (status[5] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** CWF1 ERR %d\n", status[5])
                 }
                 status[6] = rtems_task_restart( Task_id[TASKID_AVF1], lfrRequestedMode );
                 if (status[6] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** AVF1 ERR %d\n", status[6])
                 }
                 status[7] = rtems_task_restart( Task_id[TASKID_PRC1],lfrRequestedMode );
                 if (status[7] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** PRC1 ERR %d\n", status[7])
                 }
                 status[8] = rtems_task_restart( Task_id[TASKID_AVF2], 1 );
                 if (status[8] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** AVF2 ERR %d\n", status[8])
                 }
                 status[9] = rtems_task_restart( Task_id[TASKID_PRC2], 1 );
                 if (status[9] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** PRC2 ERR %d\n", status[9])
                 }
                 if ( (status[0] != RTEMS_SUCCESSFUL) || (status[1] != RTEMS_SUCCESSFUL) ||
                      (status[2] != RTEMS_SUCCESSFUL) || (status[3] != RTEMS_SUCCESSFUL) ||
                      (status[4] != RTEMS_SUCCESSFUL) || (status[5] != RTEMS_SUCCESSFUL) ||
                      (status[6] != RTEMS_SUCCESSFUL) || (status[7] != RTEMS_SUCCESSFUL) ||
                      (status[8] != RTEMS_SUCCESSFUL) || (status[9] != RTEMS_SUCCESSFUL) )
                 {
                     ret = RTEMS_UNSATISFIED;
                 }
                 return ret;
             }
             int restart_asm_tasks( unsigned char lfrRequestedMode )
             {
                 /** This function is used to restart average spectral matrices tasks.
                  *
                  * @return RTEMS directive status codes:
                  * - RTEMS_SUCCESSFUL - task restarted successfully
                  * - RTEMS_INVALID_ID - task id invalid
                  * - RTEMS_INCORRECT_STATE - task never started
                  * - RTEMS_ILLEGAL_ON_REMOTE_OBJECT - cannot restart remote task
                  *
                  * ASM tasks are AVF0, PRC0, AVF1, PRC1, AVF2 and PRC2
                  *
                  */
                 rtems_status_code status[6];
                 rtems_status_code ret;
                 ret = RTEMS_SUCCESSFUL;
                 status[0] = rtems_task_restart( Task_id[TASKID_AVF0], lfrRequestedMode );
                 if (status[0] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** AVF0 ERR %d\n", status[0])
                 }
                 status[1] = rtems_task_restart( Task_id[TASKID_PRC0], lfrRequestedMode );
                 if (status[1] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** PRC0 ERR %d\n", status[1])
                 }
                 status[2] = rtems_task_restart( Task_id[TASKID_AVF1], lfrRequestedMode );
                 if (status[2] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** AVF1 ERR %d\n", status[2])
                 }
                 status[3] = rtems_task_restart( Task_id[TASKID_PRC1],lfrRequestedMode );
                 if (status[3] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** PRC1 ERR %d\n", status[3])
                 }
                 status[4] = rtems_task_restart( Task_id[TASKID_AVF2], 1 );
                 if (status[4] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** AVF2 ERR %d\n", status[4])
                 }
                 status[5] = rtems_task_restart( Task_id[TASKID_PRC2], 1 );
                 if (status[5] != RTEMS_SUCCESSFUL)
                 {
                     PRINTF1("in restart_science_task *** PRC2 ERR %d\n", status[5])
                 }
                 if ( (status[0] != RTEMS_SUCCESSFUL) || (status[1] != RTEMS_SUCCESSFUL) ||
                      (status[2] != RTEMS_SUCCESSFUL) || (status[3] != RTEMS_SUCCESSFUL) ||
                      (status[4] != RTEMS_SUCCESSFUL) || (status[5] != RTEMS_SUCCESSFUL) )
                 {
                     ret = RTEMS_UNSATISFIED;
                 }
                 return ret;
             }
             int suspend_science_tasks( void )
             {
                 /** This function suspends the science tasks.
                  *
                  * @return RTEMS directive status codes:
                  * - RTEMS_SUCCESSFUL - task restarted successfully
                  * - RTEMS_INVALID_ID - task id invalid
                  * - RTEMS_ALREADY_SUSPENDED - task already suspended
                  *
                  */
                 rtems_status_code status;
                 PRINTF("in suspend_science_tasks\n")
                         status = rtems_task_suspend( Task_id[TASKID_AVF0] );    // suspend AVF0
                 if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                 {
                     PRINTF1("in suspend_science_task *** AVF0 ERR %d\n", status)
                 }
                 else
                 {
                     status = RTEMS_SUCCESSFUL;
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend PRC0
                 {
                     status = rtems_task_suspend( Task_id[TASKID_PRC0] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** PRC0 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend AVF1
                 {
                     status = rtems_task_suspend( Task_id[TASKID_AVF1] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** AVF1 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend PRC1
                 {
                     status = rtems_task_suspend( Task_id[TASKID_PRC1] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** PRC1 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend AVF2
                 {
                     status = rtems_task_suspend( Task_id[TASKID_AVF2] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** AVF2 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend PRC2
                 {
                     status = rtems_task_suspend( Task_id[TASKID_PRC2] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** PRC2 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend WFRM
                 {
                     status = rtems_task_suspend( Task_id[TASKID_WFRM] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** WFRM ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend CWF3
                 {
                     status = rtems_task_suspend( Task_id[TASKID_CWF3] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** CWF3 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend CWF2
                 {
                     status = rtems_task_suspend( Task_id[TASKID_CWF2] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** CWF2 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend CWF1
                 {
                     status = rtems_task_suspend( Task_id[TASKID_CWF1] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** CWF1 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 return status;
             }
             int suspend_asm_tasks( void )
             {
                 /** This function suspends the science tasks.
                  *
                  * @return RTEMS directive status codes:
                  * - RTEMS_SUCCESSFUL - task restarted successfully
                  * - RTEMS_INVALID_ID - task id invalid
                  * - RTEMS_ALREADY_SUSPENDED - task already suspended
                  *
                  */
                 rtems_status_code status;
                 PRINTF("in suspend_science_tasks\n")
                         status = rtems_task_suspend( Task_id[TASKID_AVF0] );    // suspend AVF0
                 if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                 {
                     PRINTF1("in suspend_science_task *** AVF0 ERR %d\n", status)
                 }
                 else
                 {
                     status = RTEMS_SUCCESSFUL;
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend PRC0
                 {
                     status = rtems_task_suspend( Task_id[TASKID_PRC0] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** PRC0 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend AVF1
                 {
                     status = rtems_task_suspend( Task_id[TASKID_AVF1] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** AVF1 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend PRC1
                 {
                     status = rtems_task_suspend( Task_id[TASKID_PRC1] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** PRC1 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend AVF2
                 {
                     status = rtems_task_suspend( Task_id[TASKID_AVF2] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** AVF2 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 if (status == RTEMS_SUCCESSFUL)        // suspend PRC2
                 {
                     status = rtems_task_suspend( Task_id[TASKID_PRC2] );
                     if ((status != RTEMS_SUCCESSFUL) && (status != RTEMS_ALREADY_SUSPENDED))
                     {
                         PRINTF1("in suspend_science_task *** PRC2 ERR %d\n", status)
                     }
                     else
                     {
                         status = RTEMS_SUCCESSFUL;
                     }
                 }
                 return status;
             }
             void launch_waveform_picker( unsigned char mode, unsigned int transitionCoarseTime )
             {
                 WFP_reset_current_ring_nodes();
                 reset_waveform_picker_regs();
                 set_wfp_burst_enable_register( mode );
                 LEON_Clear_interrupt( IRQ_WAVEFORM_PICKER );
                 LEON_Unmask_interrupt( IRQ_WAVEFORM_PICKER );
                 if (transitionCoarseTime == 0)
                 {
                     waveform_picker_regs->start_date = time_management_regs->coarse_time;
                 }
                 else
                 {
                     waveform_picker_regs->start_date = transitionCoarseTime;
                 }
             }
             void launch_spectral_matrix( void )
             {
                 SM_reset_current_ring_nodes();
                 reset_spectral_matrix_regs();
                 reset_nb_sm();
                 set_sm_irq_onNewMatrix( 1 );
                 LEON_Clear_interrupt( IRQ_SPECTRAL_MATRIX );
                 LEON_Unmask_interrupt( IRQ_SPECTRAL_MATRIX );
             }
             void set_sm_irq_onNewMatrix( unsigned char value )
             {
                 if (value == 1)
                 {
                     spectral_matrix_regs->config = spectral_matrix_regs->config | 0x01;
                 }
                 else
                 {
                     spectral_matrix_regs->config = spectral_matrix_regs->config & 0xfffffffe;   // 1110
                 }
             }
             void set_sm_irq_onError( unsigned char value )
             {
                 if (value == 1)
                 {
                     spectral_matrix_regs->config = spectral_matrix_regs->config | 0x02;
                 }
                 else
                 {
                     spectral_matrix_regs->config = spectral_matrix_regs->config & 0xfffffffd;   // 1101
                 }
             }
             //*****************************
             // CONFIGURE CALIBRATION SIGNAL
             void setCalibrationPrescaler( unsigned int prescaler )
             {
                 // prescaling of the master clock (25 MHz)
                 // master clock is divided by 2^prescaler
                 time_management_regs->calPrescaler = prescaler;
             }
             void setCalibrationDivisor( unsigned int divisionFactor )
             {
                 // division of the prescaled clock by the division factor
                 time_management_regs->calDivisor = divisionFactor;
             }
             void setCalibrationData( void ){
                 unsigned int k;
                 unsigned short data;
                 float val;
                 float f0;
                 float f1;
                 float fs;
                 float Ts;
                 float scaleFactor;
                 f0 = 625;
                 f1 = 10000;
                 fs = 160256.410;
                 Ts = 1. / fs;
                 scaleFactor = 0.250 / 0.000654; // 191, 500 mVpp, 2 sinus waves => 500 mVpp each, amplitude = 250 mV
                 time_management_regs->calDataPtr = 0x00;
                 // build the signal for the SCM calibration
                 for (k=0; k<256; k++)
                 {
                     val = sin( 2 * pi * f0 * k * Ts )
                             + sin(  2 * pi * f1 * k * Ts );
                     data = (unsigned short) ((val * scaleFactor) + 2048);
                     time_management_regs->calData = data & 0xfff;
                 }
             }
             void setCalibrationDataInterleaved( void ){
                 unsigned int k;
                 float val;
                 float f0;
                 float f1;
                 float fs;
                 float Ts;
                 unsigned short data[384];
                 unsigned char *dataPtr;
                 f0 = 625;
                 f1 = 10000;
                 fs = 240384.615;
                 Ts = 1. / fs;
                 time_management_regs->calDataPtr = 0x00;
                 // build the signal for the SCM calibration
                 for (k=0; k<384; k++)
                 {
                     val = sin( 2 * pi * f0 * k * Ts )
                             + sin(  2 * pi * f1 * k * Ts );
                     data[k] = (unsigned short) (val * 512 + 2048);
                 }
                 // write the signal in interleaved mode
                 for (k=0; k<128; k++)
                 {
                     dataPtr = (unsigned char*) &data[k*3 + 2];
                     time_management_regs->calData = (data[k*3] & 0xfff)
                             + ( (dataPtr[0] & 0x3f) << 12);
                     time_management_regs->calData = (data[k*3 + 1] & 0xfff)
                             + ( (dataPtr[1] & 0x3f) << 12);
                 }
             }
             void setCalibrationReload( bool state)
             {
                 if (state == true)
                 {
                     time_management_regs->calDACCtrl = time_management_regs->calDACCtrl | 0x00000010;   // [0001 0000]
                 }
                 else
                 {
                     time_management_regs->calDACCtrl = time_management_regs->calDACCtrl & 0xffffffef;   // [1110 1111]
                 }
             }
             void setCalibrationEnable( bool state )
             {
                 // this bit drives the multiplexer
                 if (state == true)
                 {
                     time_management_regs->calDACCtrl = time_management_regs->calDACCtrl | 0x00000040;   // [0100 0000]
                 }
                 else
                 {
                     time_management_regs->calDACCtrl = time_management_regs->calDACCtrl & 0xffffffbf; // [1011 1111]
                 }
             }
             void setCalibrationInterleaved( bool state )
             {
                 // this bit drives the multiplexer
                 if (state == true)
                 {
                     time_management_regs->calDACCtrl = time_management_regs->calDACCtrl | 0x00000020;   // [0010 0000]
                 }
                 else
                 {
                     time_management_regs->calDACCtrl = time_management_regs->calDACCtrl & 0xffffffdf; // [1101 1111]
                 }
             }
             void setCalibration( bool state )
             {
                 if (state == true)
                 {
                     setCalibrationEnable( true );
                     setCalibrationReload( false );
                     set_hk_lfr_calib_enable( true );
                 }
                 else
                 {
                     setCalibrationEnable( false );
                     setCalibrationReload( true );
                     set_hk_lfr_calib_enable( false );
                 }
             }
             void configureCalibration( bool interleaved )
             {
                 setCalibration( false );
                 if ( interleaved == true )
                 {
                     setCalibrationInterleaved( true );
                     setCalibrationPrescaler( 0 );   // 25 MHz   => 25 000 000
                     setCalibrationDivisor(  26 );   //          => 240 384
                     setCalibrationDataInterleaved();
                 }
                 else
                 {
                     setCalibrationPrescaler( 0 );   // 25 MHz   => 25 000 000
                     setCalibrationDivisor(  38 );   //          => 160 256 (39 - 1)
                     setCalibrationData();
                 }
             }
             //****************
             // CLOSING ACTIONS
             void update_last_TC_exe( ccsdsTelecommandPacket_t *TC, unsigned char * time )
             {
                 /** This function is used to update the HK packets statistics after a successful TC execution.
                  *
                  * @param TC points to the TC being processed
                  * @param time is the time used to date the TC execution
                  *
                  */
                 unsigned int val;
                 housekeeping_packet.hk_lfr_last_exe_tc_id[0] = TC->packetID[0];
                 housekeeping_packet.hk_lfr_last_exe_tc_id[1] = TC->packetID[1];
                 housekeeping_packet.hk_lfr_last_exe_tc_type[0] = 0x00;
                 housekeeping_packet.hk_lfr_last_exe_tc_type[1] = TC->serviceType;
                 housekeeping_packet.hk_lfr_last_exe_tc_subtype[0] = 0x00;
                 housekeeping_packet.hk_lfr_last_exe_tc_subtype[1] = TC->serviceSubType;
                 housekeeping_packet.hk_lfr_last_exe_tc_time[0] = time[0];
                 housekeeping_packet.hk_lfr_last_exe_tc_time[1] = time[1];
                 housekeeping_packet.hk_lfr_last_exe_tc_time[2] = time[2];
                 housekeeping_packet.hk_lfr_last_exe_tc_time[3] = time[3];
                 housekeeping_packet.hk_lfr_last_exe_tc_time[4] = time[4];
                 housekeeping_packet.hk_lfr_last_exe_tc_time[5] = time[5];
                 val = housekeeping_packet.hk_lfr_exe_tc_cnt[0] * 256 + housekeeping_packet.hk_lfr_exe_tc_cnt[1];
                 val++;
                 housekeeping_packet.hk_lfr_exe_tc_cnt[0] = (unsigned char) (val >> 8);
                 housekeeping_packet.hk_lfr_exe_tc_cnt[1] = (unsigned char) (val);
             }
             void update_last_TC_rej(ccsdsTelecommandPacket_t *TC, unsigned char * time )
             {
                 /** This function is used to update the HK packets statistics after a TC rejection.
                  *
                  * @param TC points to the TC being processed
                  * @param time is the time used to date the TC rejection
                  *
                  */
                 unsigned int val;
                 housekeeping_packet.hk_lfr_last_rej_tc_id[0] = TC->packetID[0];
                 housekeeping_packet.hk_lfr_last_rej_tc_id[1] = TC->packetID[1];
                 housekeeping_packet.hk_lfr_last_rej_tc_type[0] = 0x00;
                 housekeeping_packet.hk_lfr_last_rej_tc_type[1] = TC->serviceType;
                 housekeeping_packet.hk_lfr_last_rej_tc_subtype[0] = 0x00;
                 housekeeping_packet.hk_lfr_last_rej_tc_subtype[1] = TC->serviceSubType;
                 housekeeping_packet.hk_lfr_last_rej_tc_time[0] = time[0];
                 housekeeping_packet.hk_lfr_last_rej_tc_time[1] = time[1];
                 housekeeping_packet.hk_lfr_last_rej_tc_time[2] = time[2];
                 housekeeping_packet.hk_lfr_last_rej_tc_time[3] = time[3];
                 housekeeping_packet.hk_lfr_last_rej_tc_time[4] = time[4];
                 housekeeping_packet.hk_lfr_last_rej_tc_time[5] = time[5];
                 val = housekeeping_packet.hk_lfr_rej_tc_cnt[0] * 256 + housekeeping_packet.hk_lfr_rej_tc_cnt[1];
                 val++;
                 housekeeping_packet.hk_lfr_rej_tc_cnt[0] = (unsigned char) (val >> 8);
                 housekeeping_packet.hk_lfr_rej_tc_cnt[1] = (unsigned char) (val);
             }
             void close_action(ccsdsTelecommandPacket_t *TC, int result, rtems_id queue_id )
             {
                 /** This function is the last step of the TC execution workflow.
                  *
                  * @param TC points to the TC being processed
                  * @param result is the result of the TC execution (LFR_SUCCESSFUL / LFR_DEFAULT)
                  * @param queue_id is the id of the RTEMS message queue used to send TM packets
                  * @param time is the time used to date the TC execution
                  *
                  */
                 unsigned char requestedMode;
                 if (result == LFR_SUCCESSFUL)
                 {
                     if ( !( (TC->serviceType==TC_TYPE_TIME) & (TC->serviceSubType==TC_SUBTYPE_UPDT_TIME) )
                          &
                          !( (TC->serviceType==TC_TYPE_GEN) & (TC->serviceSubType==TC_SUBTYPE_UPDT_INFO))
                          )
                     {
                         send_tm_lfr_tc_exe_success( TC, queue_id );
                     }
                     if ( (TC->serviceType == TC_TYPE_GEN) & (TC->serviceSubType == TC_SUBTYPE_ENTER) )
                     {
                         //**********************************
                         // UPDATE THE LFRMODE LOCAL VARIABLE
                         requestedMode = TC->dataAndCRC[1];
                         housekeeping_packet.lfr_status_word[0] = (unsigned char) ((requestedMode << 4) + 0x0d);
                         updateLFRCurrentMode();
                     }
                 }
                 else if (result == LFR_EXE_ERROR)
                 {
                     send_tm_lfr_tc_exe_error( TC, queue_id );
                 }
             }
             //***************************
             // Interrupt Service Routines
             rtems_isr commutation_isr1( rtems_vector_number vector )
             {
                 if (rtems_event_send( Task_id[TASKID_DUMB], RTEMS_EVENT_0 ) != RTEMS_SUCCESSFUL) {
                     PRINTF("In commutation_isr1 *** Error sending event to DUMB\n")
                 }
             }
             rtems_isr commutation_isr2( rtems_vector_number vector )
             {
                 if (rtems_event_send( Task_id[TASKID_DUMB], RTEMS_EVENT_0 ) != RTEMS_SUCCESSFUL) {
                     PRINTF("In commutation_isr2 *** Error sending event to DUMB\n")
                 }
             }
             //****************
             // OTHER FUNCTIONS
             void updateLFRCurrentMode()
             {
                 /** This function updates the value of the global variable lfrCurrentMode.
                  *
                  * lfrCurrentMode is a parameter used by several functions to know in which mode LFR is running.
                  *
                  */
                 // update the local value of lfrCurrentMode with the value contained in the housekeeping_packet structure
                 lfrCurrentMode = (housekeeping_packet.lfr_status_word[0] & 0xf0) >> 4;
             }
             void set_lfr_soft_reset( unsigned char value )
             {
                 if (value == 1)
                 {
                     time_management_regs->ctrl = time_management_regs->ctrl | 0x00000004; // [0100]
                 }
                 else
                 {
                     time_management_regs->ctrl = time_management_regs->ctrl & 0xfffffffb; // [1011]
                 }
             }
             void reset_lfr( void )
             {
                 set_lfr_soft_reset( 1 );
                 set_lfr_soft_reset( 0 );
                 set_hk_lfr_sc_potential_flag( true );
             }

General Comments 0

Write
Preview

You need to be logged in to leave comments. Login now

No TODOs yet

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages